Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: GE Utilities Udhampur Name of Work: Certain B/R Repairs and allied works to electric supply installations & Repair/Maint to internal wiring, switches, Fans and other E/M items at Electric Supply installations at Command Camp, PBE and other locations under GE (Utilities) Udhampur Contract No: GE/U-46/2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Ser.No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT TOTAL AMOUNT In Words |
| 2 | Demolition of brick work or stone /boulder masonry, built in cement mortar, including all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles etc, complete all as specified and directed by Engineer-in-charge. |
| 3 | Demolition of cement concrete (unreinforced) in ground floor and in pavings not exceeding 15 cm thickness (below or above ground level), complete all as specified and directed by Engineer-in-charge. |
| 4 | Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided, complete all as specified and directed by Engineer-in-charge. |
| 5 | Brick work with sub class 'B' bricks straight or curved on plan, exceeding 6 m mean radius with old size bricks, built in cement mortar 1:6, complete all as specified and directed by Engineer-in-charge. |
| 6 | Description all as per item No 04.00 here-in-before but except bricks, complete all as specified and directed by Engineer-in-charge.Note : Old bricks obtained against demolition shall be used. |
| 7 | Walling of random rubble stone masonry uncoursed with best quality lacally available harder stones such as granite, trap, basalt stone etc, wellbonded bedded and solidly hearted, built in cement mortar 1:6, complete all as specified and directed by Engineer-in-charge. |
| 8 | Description all as per Ser item No 6.00 here-in-before but except stones, complete all as specified and directed by Engineer-in-charge.Note : Old stones obtained against demolition shall be used. |
| 9 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed by Engineer-in-charge. |
| 10 | Rolled mild steel work as in roof trusses(framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing(Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to grade Fe-410 W(Gde-E-50) quality-A, steel work duly painted with one shop coat of zinc chromate primer incl preparation of surfaces complete all as specified and directed by Engineer-in-charge. |
| 11 | Rolled mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment conforming to grade Fe.290.Gde-E-165, steel work duly painted with one shop coat of zinc chromate primer including preparation of surfaces complete all as specified and directed by Engineer-in-charge. |
| 12 | Welded steel wire fabric supplied and fixed to wood or steel members weight not exc. 4 kg per square metre complete all as specified and directed by Engineer-in-charge. |
| 13 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and directed by Engineer-in-charge. |
| 14 | M&L prepainted galvalume aluminium zink coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-charge. |
| 15 | M&L prepainted galvalume aluminium zink coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-charge. |
| 16 | Removal of existing old water proofing treatment as in roofs and Preparing RCC roof slab top by wire brushing and cleaning the dust and foreign materail etc , there after applying 15mm thick cement plaster on concrete surface in CM 1:4 finished even and smooth without using extra cement using water proofing compound complete all as specified and directed by Engineer-in-charge. |
| 17 | Preparing and Cleaning the dust and foreign materail etc complete for roof surfaces (plaster/concrete) and applying a coat of hot blown bitumen 85/25 grade @ 1.20kg/Sqm and there after laying of a layer of APP based polymeric membrane (five layered with centre core as 100 microns high molecular high density polyethylene film) weighing not less than 3.5 kg/Sqm and reinforced with polyster non woven fabric (wt. not less than 150 gms/sqm) laid on bituminous surface by press application method with 75mm side overlap and 100mm end overlap. The membrane has to be laid with LPG torch application and overlaps sealed and finished neat, after that applying one coat of bitumen 85/25 grade on top surface @ 1.20 kg/Sqm and blinded with premier dry sand @ 0.5 kg/Sqm dusted over bitumen coat, incl.applying two coats of aluminium paint over roof treatement complete all as specified and directed by Engineer-in-charge.Make- STP/IWL |
| 18 | Removing existing paint by scrapping with TruCare Wall Sander L-01/H-01 (having mechanical vacuum mechanism) or equivalent as recommended by the manufacturer and approved by the GE, having RPM not less than 1500, sanding pad of 80 Grit having dia of 7\\"/9\\" to make the surface free from dust, loose paint etc. by skilled labour complete all as specified and directed by Engineer-in-charge. |
| 19 | Taking down chowkats or frames including shutters (without taking off shutters from the frames) not exceeding 1.50 Sqm each, and removing from site, complete all as specified and directed by Engr-in-charge. |
| 20 | Taking down chowkats or frames including shutters (without taking off shutters from the frames) exceeding 1.50 Sqm but not exceeding 4 Sqm each, and removing from site, complete all as specified and directed by Engr-in-charge. |
| 21 | Taking down shutters of any description exceeding 1.00 Sqm and not exceeding 2.00 Sqm each, and removing from site, complete all as specified and directed by Engineer-in-charge. |
| 22 | Taking down and refixing shutters of any description exc 1.00 Sqm and n.exc 2.00 Sqm each in same opening, complete all as specified and directed by Engineer-in-charge. |
| 23 | S&F 2nd class hard wood (sal/hollock), glazed and skelton shutters 35mm thick open rebated and prepared to receive glass, gauge,etc. (without sash bars), edges of framing palin, chamfered or rounded, fitted with cut & mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Pt-I Section 8.24(a) supplied and fitted to chowkhats complete including fixing only iron mongery such as tower bolt,handle,hinges,aldrop bolt etc complete all as specified and directed by Engineer-in-charge. |
| 24 | S&F factory made, 2nd class hard wood (sal/hollock), plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both sides, the side of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, 35 mm thick complete including fixing only iron mongery such as tower bolt,handle,hinges,aldrop bolt etc complete all as specified and directed by Engineer-in-charge. |
| 25 | S&F flush shutters, solid core construction, with block board core and plywood face panels, comercial type on both sides, 40mm thick complete including fixing only iron mongery such as tower bolt,handle,hinges,aldrop bolt etc complete all as specified and directed by Engineer-in-charge. |
| 26 | Taking down steel windows including frames and shutters exceeding 1.50 sqm but not exceeding 4 sqm each and removing to store complete all as specified and directed by Engineer-in-charge. |
| 27 | S&F steel window (box type) factory made with sidehung shutter including pintol hinges, steel handles, steel peg stay and all locking arrangement complete with glazing bars dovetailed or welded including one shop coat of red oxide primer complete all as specified and directed by Engineer-in-charge.Note : i) The window shall be fabricated as per Drg No CEUZ/TD/1269/2008 Sheet 1/3 to 3/3 .ii) MS fillets, glazing wire gauge shall be measured and paid seprately. |
| 28 | Description all as per ser item No 26.00 here in before but without glazing bar complete all as specified and directed by Engineer-in-charge.Note : i) The window shall be fabricated as per Drg No CEUZ/TD/1269/2008 sheet 1/3 to 3/3.ii) MS fillets, glazing, wire gauge shall be measured and paid seprately. |
| 29 | Mild steel framed work such as grills, gratings with ends of bars shouldered or reveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar works, conforming to Fe-290, Gde E-165, complete all as specified and directed by Engineer-in-charge. |
| 30 | S&F aluminum handles cast type, anodised, 150 mm size complete all as specified and directed by Engineer-in-charge. |
| 31 | S&F aluminum anodised barrel tower bolts of extruded section with 150 mm long bolt complete all as specified and directed by Engineer-in-charge. |
| 32 | S&F in repair mild steel cold rolled butt hinges medium weight 100 mm long, including fixing and welding to pressed steel/wooden door frame if required complete all as specified and directed by Engineer-in-charge. |
| 33 | S&F100mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, complete all as specified and directed by Engineer-in-charge. |
| 34 | S&F of 200 mm long mild steel barrel tower bolts, stove enameled black, with bright bolt complete all as specified and directed by Engineer-in-charge. |
| 35 | S&F in repair 200 mm long mild steel barrel tower bolts, stove enameled black, with bright bolt complete all as specified and directed by Engineer-in-charge. |
| 36 | S&F of mild steel sliding door bolt plate type 250 mm long stove enameled black with bright bolt not less 12 mm dia bolt with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, complete all as specified and directed by Engineer-in-charge. |
| 37 | S&F in repair mild steel sliding door bolt plate type 250 mm long stove enameled black with bright bolt not less 12 mm dia bolt with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, complete all as specified and directed by Engineer-in-charge. |
| 38 | S&F of mild steel sliding door bolt plate type 300 mm long stove enameled black with bright bolt not less 12 mm dia bolt with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, complete all as specified and directed by Engineer-in-charge. |
| 39 | S&F in repair mild steel sliding door bolt plate type 300 mm long stove enameled black with bright bolt not less 12 mm dia bolt with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, complete all as specified and directed by Engineer-in-charge. |
| 40 | Preparation of new wooden surfaces of any description not otherwise described, exc 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed by Engineer-in-charge. |
| 41 | Pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and providing one shop coat of primer and tarring back side of frame, complete all as specified and directed by Engineer-in-charge. |
| 42 | Pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and providing one shop coat of primer and taring back side of frame, complete all as specified and directed by Engineer-in-charge. |
| 43 | M&L for providing cement concrete 1:3:6 type C-0 using 12.5mm graded crushed stone aggregates for filling in the pressed steel door frame/hold fast complete all as specified and directed by Engineer-in-charge. |
| 44 | S&F of stainless steel wire clothcut to size, 0.36 mm nominal dia wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staple complete all as specified and directed by Engineer-in-charge. |
| 45 | S&F expanded metal exceeding 4.00kg per sqm cut to length, bent to shape and welded with MS angle iron frame, complete all as specified and directed by Engineer-in-charge. |
| 46 | Dismantling floor, hearth or wall tiling including CM bedding but not backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-charge. |
| 47 | M&L for Non skid coloured 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over 15mm thick screed bed in CM 1:6, complete all as specified and directed by Engineer-in-charge. |
| 48 | Ditto all as per item above but on skirting over vertical surfaces & including 10 mm thick cement mortar 1:4 screed, set and jointed with grey cement slurry and pointed in grout of matching shade of tiles complete all as specified and directed by Engineer-in-charge. |
| 49 | Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab over 15mm thick plaster in CM (1:4) jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing, granite cutting and mirror polish finish complete all as specified and directed by Engineer-in-charge. |
| 50 | M & L for kota stone slab flooring 20-25mm thick in riser of steps, skirting, dado & pillar over 10mm thick plaster in CM (1:3) jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing, granite cutting and mirror polish finish complete all as specified and directed by Engineer-in-charge. |
| 51 | Glazed ceramic coloured tiles 450mm x 350mm x 7mm thick as in vertical/Dado surfaces such as skirting dado etc set and jointed in neat cement slurry, jointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 to receive tiles, complete all as specified and directed by Engineer-in-charge. |
| 52 | M&L for 100 mm thick cement concrete 1:2:4, type B2 (using 40mm graded agg) as in path etc finished even and smooth w/o using extra cement complete all as specified and directed by Engineer-in-charge. |
| 53 | M & L for 50mm thick Plain Cement Concrete 1:3:6, type C-2 (using 20mm graded crushed stone aggregate), finished even and smooth without using extra cement as in plinth protrection complete all as specified and directed by Engineer-in-charge. |
| 54 | Roughening surfaces of old concrete surfaces by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and directed by Engineer-in-charge. |
| 55 | Chequered cement concrete coloured tiles 25cmx25cmx25mm thick set over & including 20 mm thick screed in cement mortar (1:6) with neat cement and pointed in grey cement mixed with pigment to match the shade of tiles complete all as specified and directed by Engineer-in-charge. |
| 56 | Machine pressed precast concrete interlocking paver block 50% grey and 50% coloured, any shape and size, conforming to IS 15658-2006 of 80mm thickness, M-40 over and including 75mm thick PCC, type D-2, M-7.5(1:4:8) and 25mm thick sand cushion complete all as specified and directed by Engineer-in-charge. |
| 57 | Taking down cement plaster including tiles of any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed by Engineer-in-charge. |
| 58 | Rendering 15mm thick in cement mortar 1:4 on fair faces of bricks work/concrete surface finished the surface even and smooth (without using extra cement) with and including mixing of water proofing compound complete all as per manufacture's instructions and directed. (Note- WPC shall be measured and paid separately under relevent items).as on walls complete all as specified and directed by Engineer-in-charge.Notes :- Plaster shall be carried out upto any height in patches and contractor shall have no claim for height and scaffolding what so ever is required to complete the work. |
| 59 | Rendering 15mm thick in cement mortar 1:6 on fair faces of bricks work/concrete surface finished the surface even and smooth(without using extra cement) as on walls complete all as specified and directed by Engineer-in-charge.Notes :- Plaster shall be carried out upto any height in patches and contractor shall have no claim for height and scaffolding what so ever is required to complete the work. |
| 60 | M&L for applying two coat of oil bond distemper on walls after preparation of newly plastered surfaces over a coat of white primer, complete all as specified and directed by Engineer-in-charge. |
| 61 | M&L for applying two coats of cement base paint on walls after preparation of newly plastered surfaces over a coat of white primer, complete all as specified and directed by Engineer-in-charge. |
| 62 | M & L two coat of cement base paint over a coat of alkali resistant priming paint over old plastered surfaces of wall including preparing surfaces after conplete removal of existing treatment upto 5-10 m height from ground level and at all locations as directed including , scaffolding, cleaning and curing etc. complete all as specified and directed by Engineer-in-charge. |
| 63 | Preparation of old plastered/unplastered wall surfaces and applying one coat of oil bound distemper (including wahsing, rubbing down and stopping of distempered and painted surfaces), complete all as specified and directed by Engineer-in-charge. |
| 64 | Preparation of old plastered/unplastered wall surfaces and applying one coat of white wash, complete all as specified and directed by Engineer-in-charge. |
| 65 | Taking up or down steel tubing with connections for cleaning for refixing or removing to storeyard complete of bore 15mm complete all as specified and directed by Engineer-in-charge. |
| 66 | M&L for steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore 15 mm complete all as specified and directed by Engineer-in-charge. |
| 67 | Fixing only Steel water tubing 15mm dia medium grade galvanised with all fitting and fixed complete to wall and ceiling or laid in floors complete all as specified and directed by Engineer-in-charge. |
| 68 | S&F in repairs Rotational moulded polyethylene water storage tank 1000 Ltrs capacity, ISI marked (cylindrical vertical with closed top), double wall layer construction, hoisted and fixed in position complete all as specified in SSR Part-I, making connections incl 20mm bore ball valve brass with polyethylene float and fly nut and tank nipples incl dismantling existing water tank of any capacity and removing from site, complete all as specified and directed by Engineer-in-charge. |
| 69 | S&F in repairs Rotational moulded polyethylene water storage tank 500 Ltrs capacity, ISI marked (cylindrical vertical with closed top), double wall layer construction, hoisted and fixed in position complete all as specified in SSR Part-I, making connections incl 20mm bore ball valve brass with polyethylene float and fly nut and tank nipples incl dismantling existing water tank of any capacity and removing from site,complete all as specified and directed by Engineer-in-charge. |
| 70 | Supply and fixing in repair ball valves of size 15 mm bore dia high pressure of PTMT (Make-Prayag) with epoxy coated aluminium rod and high density plastic ball (Minimum weight not less than 210 gms) screwed for iron pipe and fixed including necessary fitting as reqd at site complete all as specified and directed by Engineer-in-charge. |
| 71 | Supply and fixing in repair angle valves cast copper alloy 15 mm, screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions including necessary fitting as required at site complete all as specified and directed by Engineer-in-charge. |
| 72 | S&F in repair 15mm dia stop cock fancy type chromium plated, complete all as specified and directed by Engineer-in-charge. |
| 73 | S&F as in repair bib tap 15mm bore fancy type chromium plated complete all as specified and directed by Engineer-in-charge. |
| 74 | S&F bib cock 15mm bore fancy type long body chromium plated in repair, complete all as specified and directed by Engineer-in-charge. |
| 75 | Preparation of new steel surfaces of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed by Engineer-in-charge. |
| 76 | M&L precast cement concrete jallies 25mm thick (measured solid set in cement mortar 1:4 incl all moulding and necessry form work, complete all as specified and directed by Engineer-in-charge. |
| 77 | Precast reinforced cement concrete, (Nominal mix), Type B-1, 1:2:4 (using 20mm graded crushed stone aggregates) as in cover slab, manhole cover, shelves and similar articles with plain face, set and jointed in cement mortar 1:4, complete all as specified and directed by Engineer-in-charge.(Note : Reinforcement shall be measured and paid separately) |
| 78 | TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for slabs,beam, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, complete all as specified and directed by Engineer-in-charge. |
| 79 | TMT bars 6mm to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for slabs,beam hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, complete all as specified and directed by Engineer-in-charge. |
| 80 | Hacking out old broken glasses (any thickness, size, quality or description) from wooden frames or steel frames, glazed with putty or fixed with wooden beads, complete all as specified and directed by Engineer-in-charge. |
| 81 | 4 mm thick sheet glass ordinary quality, and glazing with oil putty or wooden beads in squares n.exc 0.50 Sqm in each pane, complete all as specified and directed by Engineer-in-charge. |
| 82 | 10 litre capacity PVC, low level, valveless, syphonic action type flushing cistern, inlet ball valve, float valve, handle and fixing arrangement, 32 mm dia PVC flushing pipe and 15 mm dia 450 mm long PVC connection with PTMT waste coupling (fixed in repair), complete all as specified and directed by Engineer-in-charge. |
| 83 | PVC connection suitable for 15 mm pipe with PTMT nuts and washers for both ends of length 450 mm long, (fixed in repair), complete all as specified and directed by Engineer-in-charge. |
| 84 | Supply only integral water proofing compound as per latest IS specification complete all as specified and directed by Engineer-in-charge. |
| 85 | S&F in repir stainless steel grating doom 100/150mm dia with or without hole complete all as specified and directed by Engineer-in-charge. |
| 86 | S&F in repair vitreous China wash basin, white, flat back, size 550x400mm excluding tap, chain, plug but including for fixing of taps,waste fitting, brackets and cutting for and pinning in ends of brackets but fixed in repair complete all as specified and directed by Engineer-in-charge. |
| 87 | Taking down the existing aluminium door/window frame with shutters exc.1.5 sqm each incl all accessories and making good the disturbed portion complete all as specified and directed by Engineer-in-charge. |
| 88 | M&L for Powder coated (of approved color) aluminium sliding window of any shade with frame of section 100mm x 45mm , thickness of sheet 16 gauge , including sliding shutter with shutter of section 32mm x 15mm (with and including Triple Track and 2 Nos Glazed Shutter and 01 No Gauzed Shutter) including Stainless Steel wire mesh, rubber gasket for securing the glass, 4 mm thick Tinted glass and necessary Aluminium moongreies and handles, locks complete all as specified and directed by Engineer-in-charge. |
| 89 | M&L for Powder coated (of approved color) aluminium door frame of any shade with shutter of section 100mmx 45mm, thickness of sheet 3mm , partly panelled shutter and partly glazed lock rail / bottom rail of shutter 100mm x 45mm, top rail 80mm x 45mm including necessary jointing cleats, anodized aluminium including necessary fittings and aluminium mongeries i.e. 200mm long two Nos aluminium handles, 02 No, 200mm long aluminium tower bolt in each leaf, rubber gasket for securing the glass and 3 Nos 100 mm long butt hinges with each including 5 mm thick tinted glass and 12 mm thick Prelaminated Particle Board including mortice lock, hydraulic door closure to each shutter complete all as specified and directed by Engineer-in-charge. |
| 90 | E/M Portion:-Taking down carefully, copper/ aluminum point wiring (light, fan, socket or power) complete including fitting such as switch, sockets, ceiling rose, pendants socket,fan regulators any type, rectangular board ,light fittings,terminal boxes etc removing materials for taking credit and making good disturbed surfaces of walls floors and ceiling complete all as specified and directed by Engineer-in-Charge. |
| 91 | Taking down main switches, distribution boards and cut outs etc. of any type and capacity along with the existing boards and removing the same from site and making good the disturbed surface/portion of walls complete all as specified and directed by Engineer-in-Charge. |
| 92 | Taking down carefully sub main wiring of any nos of wire and size with earth wire on wooden batten/surface conduit/casing caping complete with its all accessories complete all as specified and directed by Engineer-in-Charge. |
| 93 | Material and labour for Point wiring for one light /Fan/Bell point controlled by one-way 06 Amps switch using 1.5 sq mm FRLSH copper conductor,multi-stranded, PVC insulated and unsheathed, drawn through PVC conduit of minimum 20 mm diameter,medium grade, ISI marked, including all conduit accessories such as bends, tees, junction boxes, elbows, etc, in concealed conduit or on surface/in channel fixed with GI saddle clamps duly screwed, as directed, includes providing modular sunken boxes with PVC back plates for mounting modular type switches, sockets and regulators, complete , MS screws and cup washers. Providing continuous earth wire with 1.5 sq mm FRLSH copper conductor of 1100 volts grade, It includes cutting of chases and making good the same with cement mortar and finishing of disturbed surfaces with plaster of Paris/putty/distemper/colour wash to match the existing surface, complete all as specified and directed by the Engineer-in-ChargeNOTE: Continuous earth wire of Green colour should be provided at each point with 1.5 sqmm FRLSH copper conductor cable of 1100 V grade up to ceiling rose/light fitting etc all as Specified & Directed by Engr- In-Charge. |
| 94 | Description all as per Ser item No 92.00 here-in-before, but cable 2.5 sqmm FRLSH for one 3/5 pin 6 Amp socket outlet point on an independent board. |
| 95 | Description all as per Ser item No 92.00 here-in-before, but cable 2.5 sqmm FRLSH for one 3/5 pin 6 Amp socket outlet point on the same board with other switch. |
| 96 | Description all as per Ser item No 92.00 here-in-before, but for one bell/buzzer point controlled by one bell push single pole one way . |
| 97 | Description all as per Ser item No 92.00 here-in-before, but for one 3/6 pin 16 amps socket outlet point on an independent board with cables of size 2.50 sqmm. |
| 98 | Description all as per Ser item No 92.00 here-in-before, but an independent board with cables of size 4.0sqmm. |
| 99 | S&F in replacement of switch piano, flush button type, single pole, one way15 amps complete all as specified and directed by Engineer-in-Charge. |
| 100 | S&F in replacement of socket outlet 2-in-1, 3 pin, 5 and 15 amps, flush type complete all as specified and directed by Engineer-in-Charge. |
| 101 | S&F in replacement of bell push 5 Amps for electric Bell/Buzzer, ding dong AC 230 Volt single pole complete all as specified and directed by Engineer-in-Charge. |
| 102 | S&F in replacement of electric Bell, ding dong type AC 230 Volt single pole complete all as specified and directed by Engineer-in-Charge. |
| 103 | Supply and fix in replacement of Switch Piano flush button type, single pole, one way 5 Amp complete all as specified and directed by Engineer-in-Charge. |
| 104 | S&F in replacement of socket piano flush type 2-in-1 2/3 pin 5 Amps complete all as specified and directed by Engineer-in-Charge. |
| 105 | S&F in replacement of sheet metal enclosure with socket plug top , single pole and neutral enclosure with two pin earth plug and socket complete with one MCB SP of capacity 20 to 32 Amps complete all as specified and directed by Engineer-in-Charge. |
| 106 | S&F in replacement of ceiling rose, surface bakelite 65 mm x 30 mm, 3 terminals complete all as specified and directed by Engineer-in-Charge. |
| 107 | S&F in replacement of Electronic dimmer type regulator 230 Volt step type complete all as specified and directed by Engineer-in-Charge. |
| 108 | S&F in replacement of Switch socket combination 06 Amps complete all as specified and directed by Engineer-in-Charge. |
| 109 | S&F in replacement of Switch socket combination 15 Amps complete all as specified and directed by Engineer-in-Charge. |
| 110 | S&F in replacement Sheet metal enclosure double door type for MCCB VTPN DB upto 8 way vertical type 415 volts with suitable busbar and neutral link,chases wall for fixing DB and making good distributed wall surfaces to match with existing specification for provn of 160 amps Amp 4 Pole MCCB complete all as specified and directed by Engineer-in-Charge. |
| 111 | S&F in replacement Sheet metal enclosure double door type for MCCB VTPN DB upto 4 way vertical type 415 volts with suitable busbar and neutral link,chases wall for fixing DB and making good distributed wall surfaces to match with existing specification for provn of 160 amps Amp 4 Pole MCCB complete all as specified and directed by Engineer-in-Charge. |
| 112 | S&F in replacement Sheet metal enclosure double door type TPN 4 way vertical type 415 volts with suitable busbar and neutral link,chases wall for fixing DB and making good distributed wall surfaces to match with existing specification for provn of 160 amps Amp 4 Pole MCCB complete all as specified and directed by Engineer-in-Charge. |
| 113 | S&F in replacement of 160 Amp 4 Pole MCCB 25 KA complete all as specified and directed by Engineer-in-Charge. |
| 114 | S&F in replacement of 125 Amp 4 Pole MCCB 25 KA complete all as specified and directed by Engineer-in-Charge. |
| 115 | S&F in replacement sheet metal enclosure for MCB DB double door type, single pole and neutral 12 way 240Volts with 200 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed by Engineer-in-Charge. |
| 116 | Supply and fixing in replacement 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 40 Amp current carrying capacity in the MCB DB complete with connection testing and commissioning, complete all as specified and directed by Engineer-in-Charge. |
| 117 | S&F in replacement MCB Single Pole, 6 to 32 Amps 240 volts, 10KA breaking capacity, convenient to 'C' Curve complete all as specified and directed by Engineer-in-Charge. |
| 118 | S&F in replacement MCB TPN 100 Amps , 240 volts, 10KA breaking capacity, convenient to 'C' Curve complete all as specified and directed by Engineer-in-Charge. |
| 119 | S&F in replacement MCB TP 100 Amps , 240 volts, 10KA breaking capacity, convenient to 'C' Curve complete all as specified and directed by Engineer-in-Charge. |
| 120 | Supply and fixing LED luminaire 600 mm x 600 mm, 36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete with all accessories as specified below :- Rated Wattage: 36 Watts SizeSize: 600mm x 600mmInput Voltage: 220–240 Volts AC, 50 HzType: Edge-lit / Back-lit LED panel, slim designLuminous Efficacy: Minimum 100 lumens per wattColour Temperature (CCT): Cool White (6500K) / Neutral White (4000K) as specifiedPower Factor: ≥ 0.95THD: ≤ 10%Driver: Inbuilt constant current LED driver, BIS approved |
| 121 | Body: Powder coated CRCA sheet / Aluminium housingDiffuser: High transmission opal acrylic / polycarbonate diffuserProtection: IP20 or betterLife Span: Minimum 50,000 burning hoursWarranty: Minimum 2 yearsMake: Philips / Wipro / Havells / CromptonNote:- Quoated rate includes cutting of false ceiling if required, making good damages, connection with existing wiring, earthing, testing and commissioning complete in all respects. |
| 122 | Supply, installation, testing and commissioning of 10 Watt LED bulkhead light fitting, suitable for wall/ceiling mounting complete with all accessories complete all as specified and directed by Engineer-in-Charge below :Rated Wattage: 10 WattsType: LED bulkhead, round/oval shapeInput Voltage: 220–240 Volts AC, 50 HzLuminous Efficacy: Minimum 100 lumens per wattColour Temperature (CCT): Cool White (6500K) / Neutral White (4000K) as specifiedPower Factor: ≥ 0.95THD: ≤ 10%Driver: Inbuilt constant current electronic LED driver, BIS approvedBody: High grade polycarbonate / die-cast aluminium housingDiffuser: Opal / frosted polycarbonate diffuserProtection: IP54 or better (suitable for damp areas)Mounting: Surface wall/ceiling mountingLife Span: Minimum 30,000–50,000 burning hoursWarranty: Minimum 2 yearsMake: Philips / Wipro / Havells / Crompton / Bajaj |
| 123 | S& F in replacement LED tube light fittings of 20 wattage including rawl/plug ,making connection with and including 23/0.0076 flexible copper wire three core from connector to ceiling rose not more than 1.2 mtr fixed to wall firmly , complete all as specified and directed by Engineer-in-Charge.Rated Wattage: 20 WattsType: Integrated LED Tube Light fitting (4 feet)Input Voltage: 220–240 Volts AC, 50 HzLuminous Efficacy: Minimum 100 lumens per wattColour Temperature (CCT): Cool White (6500K) / Neutral White (4000K) as specifiedPower Factor: ≥ 0.95THD: ≤ 10%Driver: Inbuilt constant current electronic driver, BIS approvedHousing: Aluminium extruded body with opal diffuserMounting: Surface / Batten typeProtection: IP20 or betterLife Span: Minimum 50,000 burning hoursWarranty: Minimum 2 yearsMake: Philips / Wipro / Havells / Crompton / Bajaj Note:- Quoated rate includes cutting of false ceiling if required, making good damages, connection with existing wiring, earthing, testing and commissioning complete in all respects. |
| 124 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-in-Charge.Make- Havells/ Philips/C&S. |
| 125 | Supply, installation, testing and commissioning of 200mm sweep exhaust fan, BLDC motor operated, suitable for wall mounting in toilet, complete with all accessories as specified below:Sweep Size:200 mm ,Motor Type: BLDC motor, Power Consumption: Approx 6–8 WattsSpeed: Approx 2000 RPM Input Supply: 220–240 Volts AC, 50 HzNoise Level: Low noise type Body: High grade ABS / Polycarbonate body, glossy finishBlades: Aerodynamically designed plastic bladesMounting: Suitable for wall mounting with round cut-out approx. 200-220mmSafety: Inbuilt thermal overload protectionProtection: IPX4 Warranty: Minimum 2 years Make: Atomberg / Havells / Crompton / Bajaj / Orient or equivalent approved makeIncluding cutting of wall, making good damages, fixing with screws, connection with existing wiring, providing PVC flexible pipe if required, testing and commissioning complete all as specified and directed by Engineer-in-Charge.Make:Atomberg/Havells/Bajaj |
| 126 | Supply, installation, testing and commissioning of ceiling mounted PIR dual tech 360 digree sensor occupancy sensor, suitable for corridor ,hallway ,stairecases for controlling LED light fittings, complete as specified below...Type: Ceiling recessed / surface mounted PIR sensorOperating Voltage: 220–240V AC, 50 HzLoad Capacity: Min 1000 Watts (LED compatible)Detection Range:8-12 metresDetection Angle: 360° Time Delay: Adjustable (30 sec to 5 min or more)Lux Control: Adjustable daylight sensitivityMounting: Recess / surface type as specifiedProtection: IP41 or betterWarranty: Minimum 2 yearsMake: Legrand Cat part -No-048806/ Havells / SchneiderNotes:-Quoted rates shall be Including connection, setting, testing and commissioning complete all as specified and directed by Engineer-in-Charge. |
| 127 | M&L for Sub main wiring complete with 2x2.5 sqmm, single core, multi stranded copper conductor FR PVC insulated and sheathed cable 1100 Volts grade, drawn in PVC Casing Capping in surface /PVC conduit on surface/concealed (as required) along walls roofs etc including 2.5 sqmm size pvc insulated unsheathed copper earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed by Engineer-in-Charge at site. Note for Item No. 125 to 128:-(i) All three wire/cable(phase, neutral and earth) should be run through for each individual circuit from the DBs. (ii) Two run / four runs of cable and one run / two runs of earth conductor and PVC Conduit be measured as one length. |
| 128 | Description all as per Ser item No. 125.00 here-in-before, but size of 2X4 Sqmm and 1X 2.5 Sqmm for Earth wire |
| 129 | Description all as per Ser item No. 125.00 here-in-before, but size of 2X 6 Sqmm and 1X 4 Sqmm for Earth wire |
| 130 | Description all as per Ser item No. 125.00 here-in-before, but size of 4X16 Sqmm and 2X 10 Sqmm for Earth wire |
| 131 | Supplying, installing, testing and commissioning of 1200 mm sweep, 230V, 50Hz, IoT enabled BLDC ceiling fan complete , power consumption not exceeding 35W at full speed, minimum , 5-star rated as per Bureau of Energy Efficiency, including down rod, canopy, shackle, mounting accessories, connection with existing wiring, testing and commissioning complete as required Power factor >0.95 downrod type suitable for ceiling installation ,Speed min 300 RPM complete all as specified and directed by Engineer-in-Charge. Make- Havells/Bajaj/Orient Note- (i) Warranty 3 years overall on fan & 5 years on BLDC Motors (ii) Rates shall includes all leads & mounting hardware testing,commisioning integration with existing Wifi |
| 132 | Supply, installation, testing and commissioning of water Storage Type Electric Water Heater (Geyser) 10 Litre capacity, suitable for bathroom use, complete with all accessories as specified below:Capacity: 10 LitresType: Instantaneous / Mini storage typePower Rating: 2 kW (approx.) Input Supply: 230 Volts AC, 50 Hz, Single PhaseHeating Element: Heavy duty copper / glass coated heating elementTank: Pressure type inner tank with anti-corrosion coatingBody: ABS / Rust proof outer body Working Pressure: min 6–8 barSafety Features:Inbuilt thermostat,Thermal cut-out,Multi-function safety valve,Pressure relief valve,IP Protection: IPX4 or better,Mounting: Wall mounted type,Warranty: Minimum 2 years on product and on tankMake: Havells Model Orazio+ or equvalant make in Bajaj / Crompton Note:- Quoted rate Includes providing and fixing necessary inlet and outlet connections PVC Pipes , CP brass nipples, connection to existing water supply line, connection to electrical point, testing and commissioning complete all as specified and directed by Engineer-in-Charge. |
| 133 | Supply and fixing GI tubing light grade 40 mm dia along the wall/ in trenches/ in duct / in culvert /road crossing and including provisioning of suitable mild steel flat iron clamps and bolts, nuts and double washers etc for holding of GI pipe alongwith poles complete all as specified and directed by Engineer-in-Charge |
| 134 | M&L for Earthing complete with galvanized steel earth plate electrodes 600 mmx600 mm x6.3 mm thick buried directly in ground earth plate not less than 2.25 m deep below normal ground level with top edge of the plate not less than 1.5 m below normal ground level connected to and including galvanized steel earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and steel including PCC pit in PCC 1:2:4 type B-1using 20 mm graded crushed stone aggregate, RCC frame with 40mm thick RCC cover reinforced with 8mm dia deformed bars handle. including excavation and earth work in any type of soil medium grade GI watering pipe 20mm bore with funnel and wire mesh and light grade GI protection pipe 15mm bore main board complete all as shown in electrical plate No 5 connected to main control board all as specified and testing on completion. Note: Excavation earthwork charcoal PCC pit is covered under this item including taking out existing earth plate etc.Note: if earth resistance of earthing is not found (2 to 5 Ω) satisfactory if will be redone by the contractor on his risk and cost. |
| 135 | Earthing complete with GI earth electrode of size 60cmx60cmx6mm buried directly in ground vertically at a depth not less than 2.25 meter below normal ground level with top edge of earth plate at a depth not less than 1.5 meter below normal ground surrounded from all sides by 15 CM thick and packed layer of charcoal dust and common salt filling in alternate layers cleaned connected to and including GI earth strip 32X6 mm size up to 7.5 mtr by means of bolts, nuts, check nuts and washers made of galvanised iron and protected light grade 20 mm bore for watering and including funnel wire mesh, RCC pit cover 50 mm thick and PCC chamber pit with PCC 1:3:6 type C-2 (including excavation and earth work disposal of surplus soil to a distance not exceeding 50 meter) and testing after completion all as specified and shown on plate No 3 of SSR Part-I 2009 all as specified and directed.Note itenm no-133 &134:- Contractor Shall provide earth pit chamber board of 3.15mm thick mild steel sheet of size 45cmX30cm fixed with12mm thick MS rod two nos up to 90 cm height by nuts/bolts including spray painting with two coats of synthetic enamel black paint complete MS sheet both side including writing letters 6cm height i.e Eart pit No, Location, Earthing test Value and date complete all as specified and directed by Engineer-in-Charge. |
| 136 | Supply, install, 2 way LED wall surface mounted light fitting 15W warm white colour complete all as specified and directed by Engineer-in-Charge. |
| 137 | Supply and fix LED Flaxi strip Neon AC LED warm white RGB smart light colour changeable mode fix with base aluminum channel alongwith acrylic capping on strip light for proper light diffusion on surface as directed by Engr-in-Charge Light with PVC outer cover ,IP 65 input voltage 220-240 VAC input frequency 50 Hzs power factor ss protection -IP -65 working temp range -20 degree celcius to + 45 degree celcius working humidity range 10-90 RH and complete all as specified and directed by Engineer-in-Charge. |
| 138 | Material and lobour for taking down and rewinding of ceiling fan of any make and model of 1200/1400 mm sweep complete with super enamelled copper wire of required size duly varnished with high quality varnish and testing complete all as specified and directed by Engineer-in-Charge. |
| 139 | Material and lobour for taking down and rewinding of exhaust fan of any type and make with super enamelled copper wire of required size covered with high quality varnish complete of 300 mm sweep (12\\") including greasing /oiling and testing complete all as specified and directed by Engineer-in-Charge. |
| 140 | Description all as per Ser item No 137.00 here-in-before, but size for upto 450 mm sweep(18\\"). |
| 141 | Supply and fix in replacement of bearing of ceiling fans 1200/1400 mm of any size for proper running and testing complete all as specified and directed by Engineer-in-Charge. |
| 142 | Supply and fix in replacement of Gun metal bushes for ceiling fans of size 1200/1400 mm including oiling and testing for proper running complete all as specified and directed by Engineer-in-Charge. |
| 143 | Supply and fix in replacement of rotor shaft of ceiling fans of size 1200/1400 mm sweep complete all as specified and directed by Engineer-in-Charge. |
| 144 | Supply in fix in replacement of ceiling fan stator of size 1200/1400 mm sweep size match to existing fan rotor of any make as per site requirment complete all as specified and directed by Engineer-in-Charge. |
| 145 | M&L Painting of ceiling fans 1200/1400mm sweep with two coats of synthetic enamel paint by means of suitable spary gun after cleaning and prepairing the surfaces and marking the circular ring line 3 mm thick line with golden colour on bottom centre complete all as specified and directed by Engineer-in-Charge. |
| 146 | Description all as per Ser item No. 143.00 here-in-before, but exhaust fan 300/450/600mm sweep. |
| 147 | S&F Bracket assembly of various sizes as required for hanging ceiling fan with rubber shackle nuts, bolts and split pin complete all as specified and directed by Engineer-in-Charge. |
| 148 | S&F condenser 2.5 mfd including fixing of clamps with screws, sleeves etc complete all as specified and directed by Engineer-in-Charge. |
| 149 | Description all as per Ser item No-146.00 here-in-before, but 3.15 mfd |
| 150 | Supply and fix ceiling fan blades as per existing pattern (set of three) of size 1200/1400 sweep complete all as specified and directed by Engineer-in-Charge. |
| 151 | Supply and fix down rod of ceiling fan made upto 1 mtr long MS pipe medium grade including two coats of synthetic enamel paint over a coat of red oxide primer with bolts/check nuts, washers etc as per existing size and shape of fans incl New U hook with rubber reel with nut bolt and washer including drilling, threading complete all as specified and directed by Engineer-in-Charge. |
| 152 | Supply and fix of canopy (set of two) for ceiling fans 1200 mm/1400 mm sweep complete all as specified and directed by Engineer-in-Charge. |
| 153 | Supply and fix ceiling fan bottom cover suitable for 1200/1400 mm sweep with existing make and model complete all as specified and directed by Engineer-in-Charge. |
| 154 | Supply and fix ceiling fan Top cover suitable for 1200/1400 mm sweep with existing make and model complete all as specified and directed by Engineer-in-Charge. |
| 155 | Supply and fix exhaust fan blade as per existing make and model of size 300 mm sweep complete all as specified and directed by Engineer-in-Charge. |
| 156 | Description all as per ser item No.153.00 here-in-before, but 450 mm sweep |
| 157 | Material and labour for Design, Composition, Supply & Installation of 4 inch thick ACP Box of size 12 feet X4 feet with MS pipe structure fix inside with 3mm Acrylic sheet with digitally printed 3M backlit vinyl on HP Latex Printer, Display both side, LED Modules complete upto 100 letters as specified size directed by Engr-in-Charge with Northern Command and MES logo fixed with four nos of MS pipe Heavy duty(C) 50mm bore up to 6Mtr height height by nuts/bolts and welding as required at site, spray painting with two coat synthetic enamel paint complete MS pipe including necessary excavation and PCC work for foundation of MS poles as directed at site, complete all as specified and directed by Engineer-in-Charge. |
| 158 | Material and labour for Design, Composition, Supply & Installation of 4 inch thick ACP Box of size 5 feet X3 feet with MS pipe structure fix inside with 3mm Acrylic sheet with digitally printed 3M backlit vinyl on HP Latex Printer, Display both side, LED Modules complete upto 50 letters as specified size directed by Engr-in-Charge with Northern Command and MES logo fixed with four nos of MS pipe Heavy duty(C) 50mm bore up to 6Mtr height height by nuts/bolts and welding as required at site, spray painting with two coat synthetic enamel paint complete MS pipe including necessary excavation and PCC work for foundation of MS poles as directed at site, complete all as specified and directed by Engineer-in-Charge. |
| 159 | Supply and fix in replacement of LED building security light, 30 watt, 230 V, with toughened glass visor, AC outdoor type with thermal management in multiple optics, powder coated, pressure die cast aluminium body with toughened glass visor, and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp, CT 5700K, lumen efficacy not less than 110 lumen/watts (in repair) complete all as specified and directed by Engineer-in-Charge.Havells Cat No-ENDURASUNBEMMSL30WLED757SASYBOPCESENSONote :- Contractor provide suitable MS reducer with clamp for fixing of street light fitting with existing street light bracket. The cost of the same is deemed to be included in relevant street light items. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
