|
| 1 | Demolition of un-reinforced cement concrete in (below or above ground level) and pavings not exceeding 15 cm thickness complete all as specified and directed. |
| 2 | M&L PCC type B0 (1:2:4) using 12.5 mm graded stone aggregate for levelling course average 25 mm thick complete all as specified and directed. |
| 3 | M&L for 10mm thick rendering in CM (1:3) on concrete surfaces using water proofing compound and finishing the surface even and fair complete all as specified and directed. Note: WPC shall be measured and paid seperately. |
| 4 | Supply only Integral water proofing compound |
| 5 | M & L for Priming the surface with oil based bituminous primer @ 0.50 KG per Sq.m and laying of 3mm thick Attatic Poly Proplene Polymeric water proofing membrane of weight not less than 3.00 Kg per Sq.m reinforced with polyester non-woven fabric of weight not less than 150 Grams per Sq.m, by torch application with side over lap of 100 mm & end over lap of 150 mm & tucked into the chases on vertical surfaces by thermo fusion complete all as specified and as directed. |
| 6 | M&L for chequered cement concrete tiles of size 300x300 mm, 20 to 25 mm thick hydraulically pressed as in floors, set jointed and pointed in neat cement slurry to match including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:4 complete all as specified and directed. |
| 7 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 8 | M & L for Vitrified Tiles, Double Charged, Coloured, Premium Quality of size not exceeding 0.36 Sq.m, 8 to 10 mm thick as in Floors, set and jointed in cement slurry and pointed flush using polymer based cementitious tiling joint filler to match the shade of the tile including screed bed or bedding layer of mortar 15 mm thick in Cement Mortar 1:4 complete all as specified and as directed. Note: The colour / shade /design of tiles shall be as approved by GE. |
| 9 | M & L for Vitrified Tiles, Double Charged, Coloured, Premium Quality of size not exceeding 0.36 Sq.m, 8 to 10 mm thick as in Skirting and Dado, set and jointed in cement slurry and pointed flush using polymer based cementitious tiling joint filler to match the shade of the tile over backing coat of 10mm thick in Cement Mortar 1:3 complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by GE. |
| 10 | M & L for Non Skid Ceramic tiles, Joint Free, Coloured, Premium Quality of size exceeding 0.18 Sq.m and not exceeding 0.38 Sq.m, 7 to 8 mm thick [Square or Rectangular] as in Floors etc, set and jointed in neat cement slurry and pointed flush using polymer based cementitious tiling joint filler to match the shade of the tile including screed bed or bedding layer of mortar 15 mm thick in Cement Mortar 1:4 complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by GE. |
| 11 | M & L for Joint Free Glazed Ceramic Tiles, Edge Cut, Concept Type, Coloured, Premium Quality, of size 450 mm X 300 mm or 350 mm x 250 mm, 7 to 8 mm thick as in Vertical Surfaces such as Skirting, Dado etc set and jointed in neat cement slurry and pointed flush using polymer based cementitious tiling joint filler to match the shade of the tile over backing coat of 10mm thick in Cement Mortar 1:3 complete all as specified and as directed.Note: The colour / shade / design of tiles shall be as approved by GE. |
| 12 | Dismantling of mangalore tiles in flooring, apron etc., of any description or thickness laid dry and pointed in any mortar complete all as specified and directed. |
| 13 | M&L for providing roof cooling ceramic tiles of size 300 x 300 mm, 7 to 8 mm thick, conforming to IS 15622, set and jointed in cement slurry and pointed flush with high performance polymer modified cementitious non slip tile adhesive to match the shade of the tile including screed bed or bedding layer of mortar 15 mm thick in Cement Mortar 1:3 complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by GE. |
| 14 | M&L Coloured Non Skid ceramic tiles 7 to 8 mm thick (Square/ Rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc., set over 15mm thick screed in CM 1:6 and jointed in neat cement slurry and pointed in white or Coloured cement to match upto 4th storey complate all as specified and directed |
| 15 | M&L for 2nd class hardwood Plain fillets.square, rectangular or triangular in section, clean sawn, secured with nails or brads not exc 3 sq.cm complete all as specified and directed. |
| 16 | Demolition of brickwork / stone/ boulder masonry, built in cement mortar including all quoins arches, pillars etc., and removing rubbish to a distance not exceeding 5.0 KM complete all as specified and directed |
| 17 | M&L for brick work with Fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed. |
| 18 | M & L for Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed. |
| 19 | Taking down chowkats or frames not exceeding 1.50 sqm. each with shutters (without taking off shutters from the frame) complete all as specified and directed. |
| 20 | Taking down chowkhats or frames exc 1.5 sq. m but n exc 4 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed. |
| 21 | S&F factory made double rebated Wood Polymer Composite [WPC] solid door/ window/ Ceosetory windows Frames/ Chowkhats of size 65mm x 150mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms), fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class 'A' category with properties of termite / borer proof, water/ moisture proof and fire retardant, fixed in position complete all as specied and as directed. Note:The hold fasts/ lugs/ fasteners shall be measured and paid separately under relevant items of this Schedule/ BOQ. |
| 22 | S&F factory made single rebated Wood Polymer Composite [WPC] solid door/ window/ Ceosetory windows Frames/ Chowkhats of size 65mm x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms), fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N(Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with properties of termite / borer proof, water/ moisture proof and fire retardant, fixed in position complete all as specied and as directed. Note:The hold fasts/ lugs/ fasteners shall be measured and paid separately under relevant items of this Schedule/ BOQ. |
| 23 | S&F factory made single rebated Wood Polymer Composite [WPC] solid door/ 1 window/Ceosetory windows Frames/ Chowkhats of size 50mm x 100mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms), fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N(Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with properties of termite / borer proof, water/ moisture proof and fire retardant, fixed in position complete all as specied and as directed. Note:The hold fasts/ lugs/ fasteners shall be measured and paid separately under relevant items of this Schedule/ BOQ. |
| 24 | S&F 35 mm Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed |
| 25 | S&F 0.9 mm thick Decorative Laminate, Type 1 of Surface Finish, Colour and Pattern as approved, fixed with approved adhesive as per manufacturer's instructions, including necessary preparation of surfaces complete all as specified and directed. |
| 26 | S & F 35mm thick Factory made, Second Class Hard Wood, Glazed and Skeleton Shutters, open rebated and prepared to receive glass, gauze, etc., divided into squares, with plain, chamfered or rounded, mitred and rebated Sash Bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part - I, Section 8, Clause 8.24 [a] and fitted to Chowkats complete all as specified and as directed. |
| 27 | S&F Stainless steel wire cloth / mesh with average aperture not exceeding 1.18 mm and dia of wire 0.28 mm and fixed with tinned tacks or Aluminium wire staples with new wooden beading including necessary painting to beading to match with existing surfaces complete all as specified and as directed. |
| 28 | S&F wood plastic composite (wpc) factory made door shutter of 30 mm thickness made out of single pieces extruded wpc (wood plastic composite) profile with homogenous fine cellular structure made with plastic and wood powder having solid structure which is eco friedndly with density not less than 650 kg/cum,anduv digitally printed to the desired design with uvlacquar coated to give surface added strength and protectionand high grade uv resistance and with heat, fire retardant will be hung and screws withdrawl strength 1800 n(face) & 900 n (edge), minium compressive strength of 50n/mm2, E-900 n/mm2 and resistance to spread of flame of class a category with property of being termite / borer proof water/ moisture proof and fire retardant and fixing with stainless stel butt hinges of required size with necessasry full body threaded star headed counter sunk s.s screw of size 10mm dia and 100 mm long. complete all as specified and as directed. |
| 29 | S&F wood plastic composite (wpc) factory made door shutter of 35 mm thickness made out of single pieces extruded wpc (wood plastic composite) profile with homogenous fine cellular structure made with plastic and wood powder having solid structure which is eco friedndly with density not less than 650 kg/cum,anduv digitally printed to the desired design with uvlacquar coated to give surface added strength and protectionand high grade uv resistance and with heat, fire retardant will be hung and screws withdrawl strength 1800 n(face) & 900 n (edge), minium compressive strength of 50n/mm2, E-900 n/mm2 and resistance to spread of flame of class a category with property of being termite / borer proof water/ moisture proof and fire retardant and fixing with stainless stel butt hinges of required size with necessasry full body threaded star headed counter sunk s.s screw of size 10mm dia and 100 mm long. complete all as specified and as directed. |
| 30 | S&F Stainless steel Handle, of extruded section Fabricated Type of size 150mm long complete all as specified and as directed. |
| 31 | S&F 100 mm size, Butt hinges, Stainless Steel, with SS hinge pin including fixtures 25 complete all as specified and as directed. |
| 32 | S&F 200mm long stainless steel, barrel tower bolts of extruded section complete all as specified and as directed. |
| 33 | S&F floor door stopper of Stainless steel, anodized, with hard drawn steel spring, fixed in floor, overall length of cover plate 150mm.complete all as specified and as directed. |
| 34 | S&F 300 mm long Stainless Steel, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed |
| 35 | M&L for reparation of new or previously untreated wood and wood based surface of any description , not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint (ordinay tint) over a cot of primer with putty complete all as specified and directed. |
| 36 | M&L for PCC 1:3:6 type C1, (using 20mm graded stone aggregate) in bed blocks and bed plates including weathering, slightly rounded or chamfered angles and throating,necessary form work etc complete all as specified and as directed |
| 37 | S&F Mild Steel work conforming to Fe Supports or Stays for Rainwater, Ventilating Pipes, including Bolts, if required, Hooks [Stay], heavy, for Large Gates, Hook and Pintle Hinges, large Hasps and Staples, Chains, hand made Sliding Bolts, Clamps, Hold Fasts, Wall Ties, Hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles complete all as specified and as directed. |
| 38 | S&F 4mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and as directed. |
| 39 | Dismantling of cast iron drain pipes, jointed in cement mortar of 100mm internal dia of pipe complete all as specified and as directed |
| 40 | Dismantling of cast iron drain pipes, jointed in cement mortar of 75mm internal dia of pipe complete all as specified and as directed. |
| 41 | S&F PVC (SWR) pipes 110 mm of Type 'A' Grade single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. |
| 42 | S&F PVC (SWR) pipes 75 mm of Type 'A' Grade single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. |
| 43 | S&F PVC (SWR) bends 110 mm any radius complete all as specified and as directed. |
| 44 | S&F PVC (SWR) 110 mm branch piece, single (single Y) equal or unequal complete all as specified and as directed. |
| 45 | S&F PVC (SWR) bends 75 mm any radius complete all as specified and as directed. |
| 46 | S&F PVC (SWR) 75 mm branch piece, single (single Y) equal or unequal complete all as specified and as directed. |
| 47 | M&L 75 mm dia PVC floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed. |
| 48 | M&L 75 mm dia PVC Nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B-1, (1:2:4) complete all as specified and as directed. |
| 49 | S&F in repairs 15mm bore, 60 cm long PTMT PVC connecting pipe fitted with brass unions to connect iron pipe to PVC pipe on both ends complete all as specified and as directed. |
| 50 | S&F 10 litres capacity PVC valveless,syphonic action type, flushing cistern low level white with inlet ball valve float and handle including brackets complete all as specified and directed. |
| 51 | S&F in repairs 15mm dia long body bib taps, cast copper alloy, fancy type,chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed. |
| 52 | S&F in repairs vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete. |
| 53 | S&F15mm dia Swan neck pillar taps, cast copper alloy, fancy type, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed. |
| 54 | S&F in repairs 15mm dia stop valves/ angle cocks, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. |
| 55 | S&F in repairs 15mm dia cast copper alloy,fancy type, chromium plated two way angle cocks screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. |
| 56 | S&F in repairs stainless steel Health Faucet,ABS body, including 1.25 m long flexible tube,ABS wall hook, non return valve complete all as specified and directed |
| 57 | S&F in repairs 15mm dia bore CP brass wall mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and as directed. |
| 58 | S&F in repairs 32mm dia PVC waste pipes 900mm long complete all as specified and as directed. |
| 59 | S&F in repairs Fancy type brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed. |
| 60 | S&F in repairs under counter Vitreous China wash basin oval shape of size minimum 550 x 400 mm excluding taps, waste, chain and plug and porcelain stopper but including brackets and 32mm brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed. |
| 61 | Taking down cement plaster of any description on brick or stone walls or concrete surfaces,ceiling surfaces , etc., including raking out joints, hacking for key scrubbing down with water, etc. and removing rubbish to a distance not exceeding 5.0 KM complete all as specified and directed |
| 62 | M & L for rendering 5mm thick in cement mortar 1:4 including mixing water proofing compound as per manufacturers instructions over a backing coat of 10mm thick in CM 1:6 on concrete or brick masonry surfaces and finishing the top surface even and smooth without using extra cement complete all as specified and as directed. Note: Water proofing compound will be measured and paid separately. |
| 63 | M & L for rendering 5 mm thick in Cement Mortar 1:3 on fair faces of concrete surface of ceiling surfaces finished even and smooth without using extra cement complete all as specified and as directed. |
| 64 | M & L for rendering to brick / concrete surfaces, 10 mm thick in Cement Mortar 1:6, surfaces finished even and smooth without using extra cement complete all as specified and as directed. |
| 65 | M & L for preparing new Ceiling surfaces by brooming down or by steel wire brushing and applying three coats of white wash complete all as specified and as directed. |
| 66 | M & L for Complete removal of existing treatment of any description on wall surfaces by using vaccume based sanding machine, removal of nails and applying two coats of Acrylic Washable Distemper by using auto roller/ airless sprayer over one coat of alkali resistant primer on wall surfaces over two or more coats of Cement based Wall Care Putty on walls by using multipurpose mixture for proper mixing of putty and putty sprayer for application of putty including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces complete all as specified and as directed.Note:- The contractor shall carryout Distempering & allied works under subject work through the Authorised Applicator of the manufacturer only. The lowest bidder shall submit MoU from manufacturer to provide technical support and trained persons for carrying out Distempering & allied works through their authorised applicators before commencement of the work to GE for approval. |
| 67 | M & L for Two coats of Weather Proof Exterior Emulsion Paint [100% Acrylic] by using auto roller/ airless sprayer over a Coat of Exterior Primer over two or more coats of Cement based Wall Care Putty [primer and putty shall be of same manufacturer as that of exterior emulsion paint] by using multipurpose mixture for proper mixing of putty and putty sprayer for application of putty on newly plastered walls/ ceiling, pillasters, bands, borders, soffits of chajjas and projections including rubbing with sand paper to obtain a smooth surface complete all as specified and as directed.Note:- The contractor shall carryout Exterior Emulsion Painting and allied works under subject work through the Authorised Applicator of the manufacturer only. The lowest bidder shall submit MoU from manufacturer to provide technical support and trained persons for carrying out Distempering through their authorised applicators before commencement of the work to GE for approval. |
| 68 | M & L for Complete removal of existing treatment of any description on walls/ ceiling, pillasters, bands, borders, soffits of chajjas and projections by using vaccume based sanding machine, removal of nails including rubbing with sand paper to obtain a smooth surfaces and applying Two coats of Weather Proof Exterior Emulsion Paint [100% Acrylic] by using auto roller/ airless sprayer over a Coat of Exterior Primer over two or more coats of Cement based Wall Care Putty [primer and putty shall be of same manufacturer as that of exterior emulsion paint] by using multipurpose mixture for proper mixing of putty and putty sprayer for application of putty complete all as specified and as directed.Note:- The contractor shall carryout Weather proof Exterior Emulsion Painting under subject work through the Authorised Applicator of the manufacturer only. The lowest bidder shall submit MoU from manufacturer to provide technical support and trained persons for carrying out Weather proof Exterior Emulsion Painting through their authorised applicators before commencement of the work to GE for approval. |
| 69 | M & L for preparing newly plastered wall surfaces by using vaccume based sanding 20 machine and applying two coats of Acrylic washable Distemper by using auto roller/airless sprayer, over a coat of alkali resistant primer on ceiling over two or more coats of Cement based Wall Care Putty on walls by using multipurpose mixture for proper mixing of putty and putty sprayer for application of putty including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces complete all as specified and as directed.Note:- The contractor shall carryout Distempering & allied works under subject work through the Authorised Applicator of the manufacturer only. The lowest bidder shall submit MoU from manufacturer to provide technical support and trained persons for carrying out Distempering & allied works through their authorised applicators before commencement of the work to GE for approval. |
| 70 | M&L for two coats of white wash on old decorated surfaces of walls etc including necessary preparation by brooming down or steel wire brushing complete all as specified and as directed |
| 71 | M&L for two coats of white wash on old decorated surfaces of ceiling etc including necessary preparation by brooming down or steel wire brushing complete all as specified and as directed |
| 72 | Dismantling structural steel work including doors, gates but excluding framed truss etc. |
| 73 | S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings conforming to Fe 410-0 or Fe 310-0. |
| 74 | M&L for two coat of synthetic enamal paint over a coat of red oxide zinc chrome primer on new steel surfacee over 10 cm width or girth complete all as specified and as directed. |
| 75 | M&L for two coat of synthetic enamal paint over a coat of red oxide zinc chrome primer on old painted steel surfacee over 10 cm width or girth complete all as specified and as directed. |
| 76 | Dismantling water tanks exc 250 ltrs and n exc 500 ltrs removing to store. |
| 77 | S&F Rotational Moulded Polythene [HDPE] Water Tanks, Triple Layered, ISI Marked, Cylindrical & Vertical Type 500 Litres Capacity hoisted and fixed in position including provision of 40mm/25mm dia spouts for connecting inlet, outlet, over flow and washout pipes including dismantling and taking out existing unserviceable PVC tanks of any description and capacity complete all as specified and as directed. |
| 78 | Dismantling water tanks exc 500 ltrs and n exc 1000 ltrs removing to store. |
| 79 | S&F Rotational Moulded Polythene [HDPE] Water Tanks, Triple Layered, ISI Marked, Cylindrical & Vertical Type 1000 Litres Capacity hoisted and fixed in position including provision of 40mm/25mm dia spouts for connecting inlet, outlet, over flow and washout pipes including dismantling and taking out existing unserviceable PVC tanks of any description and capacity complete all as specified and as directed. |
| 80 | S&F in repairs 25 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Min weight - 25mm-455gms). |
| 81 | M&L for providing and laying 2 coats of acrylic elastomeric waterproofing coating. The coating to be applied on wall shall be liquid applied highly durable waterproof coating system for wall, based on high quality acrylic emulsion, functional filler, sunlight stable pigment and quality fungicides. It shall have properties that provide features like crack bridging ability, breathability, flexibility & exterior durability and resists micro-organism growth.It shall cover hairline cracks up to 0.5 mm effectively. It shall have excellent crack bridging ability and shall bridge cracks up to 2 mm width. The elongation at break is approx. 220 %. The tensile strength is 0.7 Mpa. It has a hardness shore ‘A’ scale of 80, with an adhesion strength of 3.4 Mpa. The coating is UV resistant, algae and fungus resistant, and has a water vapor permeability of 40 gm/m²/day and a crack bridging ability of 1-2 mm. The coating must be applied with temperature above 5°C and below 45°C. The coating shall be applied in two coats of by roller or brush application at the interval of 4-6 hours.Allow applied coating to dry or cure for 7 days. complete all as specified and directed by Engr-in-charge. Make : Thermax Ltd, Tiki tar Danosa(Pvt)Ltd,M/s Torchtar menbranes & bitumen products Pvt. Ltd. |
| 82 | M & L for filling polymer modified non shrinking slurry for sunken floors of toilets by drilling holes to a depth of 60mm by 20mm dia at 1 mtr interval and applying 2mm thick Acrylic polymer modified elastomeric waterproofing membrane coating over the concrete syrfaces by mixing Acrylic emulsion cement modifier and water based concrete bonding agent and water including testing the same for 48 hours as per the manufacturer's technical specification complete all as specified and as directed Make: (a) Polymer modified non shrinking slurry = CEBEX 100 of M/S Fosroc or equivalent product of M/s. Sika India Pvt. Ltd. or M/s. STP Ltd. or M/s. Choksey Chemicals Pvt. Ltd. or M/s Bostik India Pvt. Ltd. (b) Acrylic polymer modified elastomeric waterproofing membrane = Brushbond of M/S Fosroc or equivalent product of M/s. Sika India Pvt. Ltd. or M/s. STP Ltd. or M/s. Choksey Chemicals Pvt. Ltd. or M/s Bostik India Pvt. Ltd. (C) Acrylic emulsion cement modifier and water based concrete bonding agent = NITO BOND BB with Brush bond powder of M/S Fosroc or equivalent product of M/s. Sika India Pvt. Ltd. or M/s. STP Ltd. or M/s. Choksey Chemicals Pvt. Ltd. or M/s Bostik India Pvt. Ltd. Please Enable Macros to View BoQ information |
| 83 | M & L for filling polymer modified non shrinking slurry for sunken floors of toilets by drilling holes to a depth of 60mm by 20mm dia at 1 mtr interval and applying 2mm thick Acrylic polymer modified elastomeric waterproofing membrane coating over the concrete syrfaces by mixing Acrylic emulsion cement modifier and water based concrete bonding agent and water including testing the same for 48 hours as per the manufacturer's technical specification complete all as specified and as directed Make: (a) Polymer modified non shrinking slurry = CEBEX 100 of M/S Fosroc or equivalent product of M/s. Sika India Pvt. Ltd. or M/s. STP Ltd. or M/s. Choksey Chemicals Pvt. Ltd. or M/s Bostik India Pvt. Ltd. (b) Acrylic polymer modified elastomeric waterproofing membrane = Brushbond of M/S Fosroc or equivalent product of M/s. Sika India Pvt. Ltd. or M/s. STP Ltd. or M/s. Choksey Chemicals Pvt. Ltd. or M/s Bostik India Pvt. Ltd. (C) Acrylic emulsion cement modifier and water based concrete bonding agent = NITO BOND BB with Brush bond powder of M/S Fosroc or equivalent product of M/s. Sika India Pvt. Ltd. or M/s. STP Ltd. or M/s. Choksey Chemicals Pvt. Ltd. or M/s Bostik India Pvt. Ltd. Please Enable Macros to View BoQ information |
