|
| 1 | M & for preparation of existing distempered surfaces of walls and applying one coat of Oil bound distemepr on walls after filling putty or white cement to holes,cracks and uneven surfaces where required etc complete all as specified and as directed by the Engineer-in-Charge. |
| 2 | Material and labour for preparation of old decorated plastered or unplastered surfaces of walls by brooming down or by steel wire brushing, scraping down smoke spots, moulds, moss and efforescent salts, trading oil, greasy spots etc, and applying one coat of white wash on walls by filling putty or white cement to holes,cracks and uneven surfaces etc complete all as specified and as directed by the Engineer-in-Charge. |
| 3 | All as per item No 01 above but applying one coat of white wash on ceiling by filling putty or white cement to holes,cracks and uneven surfaces etc complete all as specified and as directed by the Engineer-in-Charge. |
| 4 | Material and labour for preparation of old painted wooden surfaces of any description not other wise described over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and as directed by the Engineer-in-Charge. |
| 5 | Material and labour for preparation of old painted steel or steel based surfaces by any discription not other wise described, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by the Engineer-in-Charge. |
| 6 | Complete removal of existing treatment on old plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed by the Engineer-in-Charge. |
| 7 | Applying 3mm thick wall care putty (to be applied in two coats) on any type of surfaces of wall complete all as specified and as directed by the Engineer-in-Charge. |
| 8 | Applying 3mm thick wall care putty (to be applied in two coats) on any type of surfaces of ceiling complete all as specified and as directed by the Engineer-in-Charge. |
| 9 | Material and labour for preparation of old plastered surfaces and applying two coat of acrylic exterior emulsion paint over a coat of primer on walls, facia/chajjas etc. at any height (including scaffolding if required) complete all as specified and as directed by the Engineer-in-Charge. |
| 10 | M & L Preparing old Surfaces of Walls and applying one coats of Cement base paint as per the existing pattern complete all as specified and as directed. |
| 11 | Taking down cement plaster of any description on brick, concrete or stone walls or ceiling including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off complete all as specified and as directed by the Engineer-in-Charge.\ |
| 12 | M&L for rendering 15mm thick CM 1:6 on fair faces of brickwork or concrete surfaces finished even & smooth w/o using extra cement complete all as specified and as directed by the Engineer-in-Charge. |
| 13 | M & L for Rendering 15mm thick in cement mortar 1:4 on other than fair faces of Brick walls or on concrete surfaces plastered surfaces finished even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge. |
| 14 | M&L Rendering 5mm thick on fair faces of brick work or concrete surfaces in CM (1:3) in ceiling complete all as specified and as directed by the Engineer-in-Charge. |
| 15 | M&L for two coats of white wash on new plaster of ceiling surfaces including preparation of surfaces complete all as specified and as directed by the Engineer-in-Charge. |
| 16 | M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of 3 mm wall care putty complete all as specified and directed by Engr-in-Charge |
| 17 | M & L Preparing New Surfaces of Walls and applying two coats of Cement base paint as per the existing pattern complete all as specified and as directed. |
| 18 | Supply only Liquid water proofing compound conforming to latest IS specifications. |
| 19 | Material and labour for marking /numbering in white paint over black paint surface incl preparation of surfaces to write letters, figures ( Block, Roman, Italic or Indian ) stops, comma, short lines etc n. exc 30 cm height at a level n. exc 10m from average ground level complete all as specified and as directed by the Engineer-in-Charge. |
| 20 | M & L for applying one coats of tera kota on any type of surface complete all as specified and as directed by the Engineer-in-Charge. |
| 21 | M&L for removing plants/sherbs root with chemical treatment grown on wall/junctions and roof and making good of the existing brick/concrete surfaces of area n.exc 0.50 Sqm complete all as specified and as directed by the Engineer-in-Charge. |
| 22 | Cleaning of water tank of capacity exc 250 ltrs and n. exc 500 ltrs & removing all scale & dirt, etc., from tanks & from mouths of circulating pipes, etc. including repair or replacement of float valve disconnecting and refixing complete all as specified and as directed by the Engineer-in-Charge. |
| 23 | Cleaning of water tank of capacity exc 500 ltrs and n. exc 1000 ltrs & removing all scale & dirt, etc., from tanks & from mouths of circulating pipes, etc. including repair or replacement of float valve, disconnecting and refixing complete all as specified and as directed by the Engineer-in-Charge. |
| 24 | Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or driling out old glazing pins/spring clips and providing and fixing new ones complete all as specifed and directed. |
| 25 | S&F Securing glass of any description in existing metal frames glazed with putty/ beads including removing loose or decayed putty/ beads, painting/oiling one coat on rebates, grooves, reputtying and painting/oiling puttied surface to match existing work (New length of frame reputtied shall be measured) |
| 26 | S&F 4mm thick Sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane |
| 27 | S&F Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane |
| 28 | Dismantling loose concrete cover of RCC columns, beams, slabs chajjas and the like as directed, roughening and cleaning concrete surface with steel wire brushes, washed with water and allowed to dry, incl derusting of steel reinforcement, providing fabric mild steel wire mesh 75 mm x 75 mm x 2 mm dia as reinforcement to concrete. After placing the additional reinforcement all concrete surfaces shall thoroughly scrubbed with brushes, washed with water and alloy to dry . To this surfaces apply chemical polycrete admixture at the rate not less than 2% by weight of cement and providing minimum 30 mm thick (average thickness ) gunniting mix (using 1 part of ordinary Portland cement 53 Grade and 2 parts of ghaggar sand mixed with adhesive / admixture at the rate as directed) with a pressure of 2 to 2.5 Kg per Sq cm by gunniting machine and surfaces finished even and fair, incl necessary padding, shuttering / form work . Including 5 mm thick cement plaster in CM (1: 4 ) complete all as specified and directed by Engineer - in -charge. Note:- (a) The rate is inclusive for scaffolding or reqd necessary arrangement for multi-storey bldg external gunniting. |
| 29 | Note :-(a) The site will be handed over as & when received from users.(b) Height of work may go upto 15M from ground level. Please Enable Macros to View BoQ information |
