|
| 1 | ESTIMATE FOR PROPOSED CONSTRUCTION OF SUITE ROOM IN INTERNATIONAL GUEST HOUSE(1ST FLOOR), K.U. |
| 2 | Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil butexcluding laterite or sandstone) including removing,spreading or stacking the spoils within a lead of 75 m.as directed. The item includes necessary trimming thesides of trenches, levelling, dressing and ramming thebottom, bailing out water as required complete.(a) Depth of excavation not exceeding 1,500 mm. |
| 3 | Dismantling carefully terraced floor only (including floor finish if any) or lime terracing in ground floor roof and removing rubbish asdirected within a lead of 75 m. |
| 4 | Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75m. |
| 5 | Dismantling R.C. floor, roof, beams etc. including cutting rods and removing rubbish as directedwithin a lead of 75 m. including stacking of steelbars. |
| 6 | Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within alead of 75m as directed. |
| 7 | Removing loose scales, blisters etc. from old painted surface and thoroughly smoothening the surface to make the same suitable for receiving fresh coat of paint. |
| 8 | Applying epoxy based reactive joining agent for joining the old concrete withfresh concrete to be applied within manufacturer's specified time as permanufacturers specification. (0.4 Kg / m² of concrete surface). |
| 9 | Applying 2 coats of bonding agent with synthetic multi functional rubberemulsion having adhesive and water proofing properties by mixing with waterin proportion (1 bonding agent : 4 water : 6 cement) as per Manufacturer's specification [Cement to be supplied by the Department] |
| 10 | Cement consumption 1kg/m2 applying 2 coats of bonding agent supplied by the contractor. |
| 11 | Cement concrete with graded jhama khoa (30 mm size) excluding shuttering In ground floor and foundation. (a) 1:3:6 proportion |
| 12 | Supplying and laying Polythene Sheet (150gm / sq.m.) overdamp proof course or below flooring or roof terracing or infoundation or in foundation trenches. |
| 13 | Controlled Cement concrete with well graded stone chips (20 mm nominal size) excluding shuttering and reinforcement with complete design of concreteas per IS : 456 and relevant special publications, submission of job mixformula after preliminary mix design after testing of concrete cubes as perdirection of Engineer-in charge. Consumption of cement will not be less than300 Kg of cement with Super plasticiser per cubic meter of controlledconcrete but actual consumption will be determined on the basis ofpreliminary test and job mix foumula. In ground floor and foundation.[usingconcrete mixture]M 25 Grade 1st Floor (i) Pakur Variety |
| 14 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.II. Other than JSW/JSPL/SHYAM/SRMB.../SSL |
| 15 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood , beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor)(c) Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work Page-42 Item-(C).36( C) |
| 16 | Labour for Chipping of concrete surface before taking upPlastering work. |
| 17 | Brick work with 1st class bricks in cement mortar (1:6)(a) In superstructure |
| 18 | 125 mm. thick brick work with 1st class bricks in cement mortar (1:4). |
| 19 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface]With 1 : 6 cement mortar wall(b) 20 mm thick plaste |
| 20 | (c) 15 mm thick plaster |
| 21 | (iii) With 1:3 cement mortar(c) 10 mm thick plaster |
| 22 | Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor) (a) One Coat i) Water based interior grade Acrylic Primer % |
| 23 | Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative manufacturer's specification and as per direction of the EIC. (i) One Coat |
| 24 | Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : (Two coats)ii) Luxury Quality |
| 25 | Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick) |
| 26 | Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. In Ground floor (Two Coat) c) Super Protective 100% Acrylic Emulsion. |
| 27 | Providing and fixing partition upto ceiling height consisting of G.I. frame andrequired board, consisting of floor and ceiling channel 50/51 mm wide havingequal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at thespacing of 610mm centre to centre with dash fastener of 12.5 mm dia meter 50mm length or suitable anchor fastener or metal screws with nylon plugs and thestuds 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50mm thick fixed vertically within m each) to be provided at the horizontal joints of two boards, fixed to thestuds using metal to metal flat head screws, including jointing and finishing to aflush finish with recommended jointing compound, jointing tape, angle beads atcorners (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitablefor board as per manufactureii) 70 to 71 mm overall thickness partition using 10 mm thick High pressure steamcured non-Asbestos multipurpose Cement Board reinforced with cellulose fibre(Density>1250kg/m3) manufactured through autoclaving process as per IS:14862 with suitable fibre cement screws. |
| 28 | Providing and fixing of false ceiling with powder coated exposed G.I. gridsuspension system (E-Grid U-1520 or equivalent load carrying capacity with midspan deflection not exceeding 1/360 span with hanger spacing of 1200mm c/c )consisting of Main Runner 3600 mm long, Cross Tee 1200 mm / 600 mm long an Wall Angle. The Wall Angle shall be fixed on PVC Dash Fasteners on theperimeter of the wall by steel screws with distance 300mm c/c. The Main RunnersAcoustic Ceiling Tiles) of approved patern and size 595mm X 595mm with NRCvalue > 0.65 should be placed in the Grid module to form a False Ceiling. Allcomplete as per the drawinga) Acoustic False Ceiling (with 15mm thick OW Acoustic Board and E-Grid U-1520). |
| 29 | Supplying and laying true to line and level Double ChargeVitrified Tiles of approved brandconforming to IS 15622: 2006(Group B I a) and tested as per IS 13630:2006 (relevant parts)[Non-modular sizes for tiles with Water Absorption (av.) ≤0.08 %] in floor, skirting etc. set in 20 mm thick sand cementmortar (1:4) bed prepared after application of slurry using1.75Kg of cement per Sqm over the base and 2mm thickcement slurry using cement @2.91Kg./sqm at the back side ofthe tiles and laEngineer-in-Charge. (Note: This work should not beexecuted without specific permission of SuperintendingEngineer)Supplying, fitting and fixing Marble Slab/tile of 15 to 18 mm thickness in floor(a) :(size not Iess than 600mmX 600 mm X 9.5mm thick) |
| 30 | Supplying, fitting & fixing 1st quality Ceramic tiles in wallsand floors to match with the existing work & 4 nos. of keystones (10mm) fixed with araldite at the back of each tile &finishing the joints with white cement mixed with colouringoxide if required to match the colour of tiles includingroughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.(B) Wall(b) Area of each tile above 0.09 Sq.m(i) Coloured decorative |
| 31 | (a) M.S.or W.I. Ornamental grill of approved design jointscontinuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor.ii) Grill weighing above 16 Kg./sq.mtr and above |
| 32 | Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized(with required film thickness and specified colour / natural) matt finishedconforming to IS: 1868-1983 for fabrication of composit door, sliding casement windows, partitions, formed of basic sections of any ISIembossed / certified make and brand as per direction of Engineer - In-Charge. (Payment will be made on finished length.B) 15 Micron colour annodizing.b) 3- track sliding windowi) Bottom frame |
| 33 | ii) Top and side frame. |
| 34 | d) Shutter for all track sliding window(i) Bottom & Top member |
| 35 | (ii) Style side member |
| 36 | (iii) Inter lock member |
| 37 | iv) Glazing clip. |
| 38 | h) Louvered window. |
| 39 | ii) Louvered Section. |
| 40 | iii) Cleat angle ( Non-annodized). |
| 41 | c) 4- track sliding windowi) Bottom frame |
| 42 | ii) Top and side frame. |
| 43 | d) Shutter for all track sliding window.(i) Bottom & Top member |
| 44 | (ii) Style side member |
| 45 | (iii) Inter lock member |
| 46 | a)'T' shaped EPDM gasket for frames. |
| 47 | b)'U' shaped EPDM gasket for frames. |
| 48 | Supplying PVC rollers for sliding windows as per direction of Engineer in charge. |
| 49 | Supplying maruti lock(100mm) |
| 50 | Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987.(ii)4 mm thick coloured/tinted/smoke glass. |
| 51 | iv) 5mm thick coloured / tinted / smoke glas |
| 52 | k) Movable door shutter.i) Door frame. (Top & sides). |
| 53 | ii) Shutter :Top rail |
| 54 | Bottom rail. |
| 55 | Lock rail |
| 56 | Door vertical. |
| 57 | (b) Supplying 'Godrej' mortice lock chromium plated with keys 6 levers including fitting & fixing complete. |
| 58 | ii) Godrej Hydraulic door closer fitted and fixed complete.(a) Heavy type |
| 59 | (i) Door stopper.(Brass) |
| 60 | Supplying, fitting & fixing Stainless Steel 'D' or 'H' type of size 300 mm x 19 mmtubular Handle with Grade 304, CE certified, marked & conforming to EN -1154, of approved quality of reputed brand as per direction of Eingineer-in-Charge fitted and fixed complete including all incidental charges. |
| 61 | Anodised aluminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete.a) With continuous plate base hexagonal/round rod.150 mm grip x 10 mm dia. Rod |
| 62 | Supplying stainless steel functional hinge for casement window as per approved brand as directed by Engineer- in -charge. (Natural White)(b) 300 mm long |
| 63 | Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark.viii) 100mm. X 75mm. X 3.50mm. |
| 64 | Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987;(A) clear, toughened glass conforming to IS: 2553-1992 (part-II)(B) coloured, toughened glass conforming to IS: 2553-1992 (part-II)(i) 6mm thick |
| 65 | i) Fixed partitions.(Unsupported length of vertical member upto 1.5 mtr. Height of both endsof vertical member restrained but panels within 0.9 sq.m.)i) Top , bottom & side member. |
| 66 | ii) Intermediate member. |
| 67 | Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987;(A) clear, toughened glass conforming to IS: 2553-1992 (part-II)(B) coloured, toughened glass conforming to IS: 2553-1992 (part-II)(i) 6mm thick |
| 68 | Labour charge for fabrication and installation of composite door,window, partitions made from annodized extruded alloy aluminium sections for the following units:-(A) Glazed aluminium sliding windows made of extruded and annodizedalloy aluminium sectios, fabrications, including cutting to proper shapeand size, drilling and aligning of window shutter frame fitted with in builtlocking arrangements, sliding rollers and other necessary fittings, fixture,where necessary including cutting to requisite size and fixing glass asper drawing, specification and direction of EIC.The rate includes the hire charge of all tools and plants, including allincidental charges, adhesive, joineries such as screw, cleat angle etc. butexcluding the cost of extruded aluminium sections, glass, neoprene /EPDM gasket, locking arrangement and rollers.ii ) 3 /4 track sliding window. |
| 69 | iv ) Fixed glazing. |
| 70 | v ) Louvered window. |
| 71 | iii ) Openable / Casement window. |
| 72 | Supplying, fitting and fixing fibre reinforced polymer (FRP) Composite doorframe as per approved section with glass fibre reinforced plastic moulded skinsand a special sandwich core, so as to impart monolitaheic composite structure asper approved technology of Department of Science and Technology (DST) tosafisfy IS: 4020 door testing performance criteria..(i) 66mm x 90mm |
| 73 | Supplying, fitting & fixing fibre reinforced polymer (FRP) Composite doorshutters as per approved design with glass fibre reinforced plastic moulded skinsand a special sandwich core, so as to impart monolitaheic composite structure asper approved technology of Department of Science and Technology (DST) to satisfy IS:4020 door testing performance criteria.In ground floor.(i) 32 mm thick |
| 74 | Supplying, fitting and fixing M.S. clamps for door and window frame made of flatbent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately) (a) 40mm X 6mm, 250mm Length |
| 75 | Anodised aluminium Aldrop / Sliding bolts of approved quality manufacturedfrom extruded section conforming to I.S. specification (I.S. 2681/66) fitted and fixed complete.(iv) 300mm x 19mm dia. bolt. |
| 76 | Anodised aluminium barrel / tower / socket bolt (full covered) of approvedmanufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws:(viii) 225mm long x 12mm dia. bolt. Page-144 Item-(G).26(viii) |
| 77 | Anodised aliminium D-type handle of approved qualitymanufactured fromextruded section conforming to I.S. specification (I.S. 230/72) fitted and fixedcomplete:(vii) 150 mm grip x 12 mm dia rod. |
| 78 | Supplying, fitting and fixing Stainless Steel railing consist of 38mm dia and 900mm height vertical balustrade at every two alternative steps, 50mm dia top rail, 3 (three) nos 19mm dia horizontal Strainless steel pipe and base/cover plate with Strainless Steel GRADE 304 containing 7.5% nickle (Interior Grade) Brushed/Mat finish, complete as per direction of the Engineer-in-charge.Weight of Strainless Steel railing per metre 6.5 Kg (approx) |
| 79 | Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming toIS:13592-1992 with all necessary clamps nails, including making holes inwalls, floor etc. cutting trenches in any soil through masonry concretestructures etc if necessary and mending good damages including joining withjointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete.A) UPVC Pipes:(ii) 110 mm. Dia. |
| 80 | B) UPVC Fittings:a) Plain Tee(ii) 110 mm. Dia. |
| 81 | d) Shoe |
| 82 | Supplying, fitting & fixing granite slabs 15mm to 18 mm. thick with uniform texture & without decorative veins in columns,wall, facia,rise etc. with 15 mm thick [avg] cement mortar (1:2) including making suitable arrangements to hold the stones properly by brass / copper hooks including pointing in cement mortar (1:2) (1 white cement : 2 marble dust) with admixture of pigment matching the stone shades all complete as per direction of the Engineer-in-charge including cost of all materials, labours, scaffolding, staging, curing and roughening of concrete surface complete.[Using cement slurry at back side of granite @ 4.4 kg/sq.m & white cement slurry for joint filling @ 1.8 kg/sq.m]In ground floorb) Area of each Granite slab above 1.00 Square meter. |
| 83 | Supplying, fitting and fixing Black Stone slab used in Kitchen slab, alcove, wardrobe etc. laid and jointed with necessary adhesive Cement mortar (1:2) including grinding or polishing as per direction of Engineer-in -Charge in Ground Floor.(b) Slab Thickness above 25 mm and upto 37.5 mm |
| 84 | (a) Priming one coat on steel or other metal surface with synthetic oilbound primer of approved quality including smoothening surfaces by sand papering etc. |
| 85 | (A) Painting with best quality synthetic enamel paint of approved makeand brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :(b) On steel or other metal surface :With other than hi-gloss of approved quality-(iv) Two coats (with any shade except white) |
| 86 | Roof treatment by application of non toxic polyurethane modified acrylic based singlecomponent (P U Roof Coat) solvent free, cold applied polyurethane modifiedelastomeric waterproofing membrane with excellant UV resistant capasity as perASTM D6083fa water based 100% acrylic elastomeric emulsion polymer latex coating.,.. used as protective coating for roofs} after preparing the surfaceby cleaning andti repairing the roof cracks by cement & sand mortar (1:4), preferably with:i!: antishrinkage mortar (to be paid separately) if any, apply two coats along with a5 gineer -in-charge. (Note: If Geotextile Fleece not uesd ,the rate would be reducedby Rs. 5/-per Sqm |
| 87 | S&P Items |
| 88 | Supplying, fitting and fixing G.I. pipes of TATA make with all necessaryaccessories, specials viz. socket, bend, tee, union, cross, elbo, nipple,longscrew, reducing socket, reducing tee, short piece etc. fitted withholder bats clamps, including cutting pipes, making threads, fitting, fixingetc. complete in all respect including cost of all necessary fittings asrequired,jointing materials and two coats of painting with approved paintin any position above ground. (Payment will be made on the centre linemeasurements of total pipe line including all specials. No separatepayment will be made for accesories, specials. Payment for painting willbe made seperately)(ii) 15 mm dia. medium quality |
| 89 | (ii) 25 mm dia. medium quality |
| 90 | (ii) 40 mm dia. medium quality |
| 91 | Supplying, fitting and fixing Peet's valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.).(v) 40 mm dia |
| 92 | (vii) 25 mm dia |
| 93 | (ix) 15 mm dia |
| 94 | Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992(A) (i) Single Socketed 3 Meter Length(b) 110 mm |
| 95 | Labour for fitting and fixing U.P.V.C. pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessaryspecials, cutting pipes, cutting holes in walls or R.C. floor where necessaryand mending good all damages excluding the cost of masonry or concretework, if necessary, but including the cost and fitting and fixing holder batclamps (any floor) or for underground work including cutting trenches upto1.5 metre and refilling the same complete as per direction of the Engineer-in-charge. (Payment will be made on centre line measurement of the totalpipeline including specials.(ii) 110 mm dia. |
| 96 | Supplying,fitting and fixing approved brand P.V.C. CONNECTOR whiteflexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia. |
| 97 | Supplying, fitting and fixing bib cock or stop cock.d) (i) Chromium plated angular Stop Cock with wall flange (Equivalent to Code No. 5053 & Model - Florentine of Jaquar or similar brand). |
| 98 | Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992(ii) Plain Tee(b) 110 mm |
| 99 | Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992(iii) Door Tee(b) 110 mm |
| 100 | Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992(ix) Bend 87.5º(b) 110 mm |
| 101 | Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992xv) Vent Cowl(b) 110 mm |
| 102 | Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992xxii) 125/110 S Trap with W.C. Ring(b) 110 mm |
| 103 | Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer(f) 2000 litre capacity |
| 104 | Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm (depth) with 250 mm thick 1st. class brick work in cement mortar (1:4) on all sides, bottom of the pit consisting of 100 mm thick cement concrete (1:3:6) with stone necessary earthwork in excavation in all sorts of soil, filling sides of the pit with earth and removing spoils after work complete in all respect with all costs of labour and materialsi) With Pakur variety. (SAIL/TATA/RINL) |
| 105 | 18% GST |
| 106 | 1% CESS Please Enable Macros to View BoQ information |
