|
| 1 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc complete. |
| 2 | Demolishing cement concrete manually/ by mechanical means including disposal of matenal within 50 metres lead as per direction of Engineer in charge. Nominal concrete 1:3.6 or richer mix (i/c equivalent design mix) |
| 3 | Distempering with 1st quality acrylic washable distemper (ready made) of approved manufacturer and of required shade and colour complete as per manufactur's specification One or more coats on old work |
| 4 | Dismantling tile work in floors and roofs laid in cement mortar including sticking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm |
| 5 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steer nuts and bolts complete, ile fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc, of required size, on the top of the floor or the side of waist slati with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding foxing accessories such as nuts, bolts, fasteners etc). |
| 6 | Providing and foxing acrylic / PVC sheet panes with putty and nails whenever necessary |
| 7 | Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc and disposal of same, all as per the direction of Engineer-in-charge |
| 8 | Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in-charge |
| 9 | Demolishing mud phaska in terracing and disposal of matenal within 50 metres lead |
| 10 | Kota stone skab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 4 (1 cement: 4 coarse sand) 25 mm thick |
| 11 | Demolishing brick work manually by mechanical means including stackingof serviceable material and disposal of unserviceable material within 50metres lead as per direction of Engineer-in-charge. In cement mortar |
| 12 | Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete |
| 13 | Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1) cement: 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement 2 stone dust) with an admixture of pigment matching the stone shade (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) Red sand stone exposed face fine dressed with rough backing 30 mm thick |
| 14 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor ll level in all shapes and sizes in Cement mortar 1.6 (1 cement: 6 coarse sand) |
| 15 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 landings, balconies, shelves, chajjas, lintels, bands, plain window sills. staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1.1.5:3 (1 cement 1.5 coarse sand (zone-III) 3 graded stone aggregate 20 mm nominal size) |
| 16 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 landings, balconies, shelves, chajjas, lintels, bands, plain window sills. staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1.1.5:3 (1 cement 1.5 coarse sand (zone-III) 3 graded stone aggregate 20 mm nominal size) |
| 17 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto all level. Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 18 | Centering and shuttering including strutting, propping etc and removal of form for all heights Columns, Pillars, Piers, Abutments. Posts and Struts |
| 19 | Centering and shuttering including strutting, propping etc. and removal of form for all heights Suspended floors, roofs, landings, balconies and access platform. |
| 20 | Centering and shuttering including strutting, propping etc and removal of form for all heights Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 21 | Providing & fixing White vitreous china water closet squatting pan (Indian type) along with \\"5\\" or \\"P\\" trap including dismantling of old WC seat and \\"S\\" or \\"P\\" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. Orissa pattern W.C Pan of size 580x440 mm |
| 22 | Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/recessed steel/PVC conduit including dismantling as required. Group C |
| 23 | Supplying, installation, testing and commissioning of 1200 mm sweep AC electric ceiling fan capacitor type with double ball bearing complete with down rod, canopies, shackles, blades but without regulator suitable for operation on 230/240 volts, 50Hz single phase AC supply including wiring the down rod of standard length up to 1mtr with 2x1.5 sq. mm PVC insulated copper conductor with fan sheet etc, as required. (Make Bajaj/ Havells/ Usha/CG) |
| 24 | Supplying and fixing of LED 18WATT Fiting on Surface and wall mounted LED button, for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver as required of Bajaj Philips havells, as approved make |
| 25 | Providing and fixing of 120 watt LED flood light (IP66) with aluminium housing and heavy heat sink, including toughned glass (Havelis, Bajaj, Crompton) |
| 26 | Supplying and fixing following piano type switch/ socket on the existing switch box/cover including connections etc. as required 5/6 A switch |
| 27 | Supplying and foxing following piano type switch/socket on the existing switch box/cover including connections etc. as required 15/16 A switch |
| 28 | Supplying and fixing following piano type switch/ socket on the existing switch box/cover including connections etc. as required 3 pin 5/6 A socket outlet |
| 29 | Supplying and fixing following way, single pole and neutral, sheet steel, MC distribution board, 240 V, on surface/ recess, complete with tinned copper bus but, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc as required. (But without MCB/RCCB/Isolator) 16 way, Double door |
| 30 | Supplying and fucing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole |
| 31 | Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc as required. 63 A |
| 32 | Supplying and fixing of 32 mm dia X 2.00 meter long G1 pipe (medium class) bracket for mounting of fluorescent / HPMV / HPSV street light fitting on pole including bending the pipe to the required shape, 2 Nos. 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc as required. |
| 33 | Earthing with G.I earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc with charcoal/coke and salt as required. |
| 34 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate 2 sections and other sections of approved make conforming to IS: 733 and IS 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, te at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing paneling. CP brass stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge (Glazing, paneling and dash fasteners to be paid for separately): For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS 1868, Minimum anodic coating of grade AC 15) |
| 35 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fxing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i e, at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P. brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately). For fixed portion For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 36 | Renewing acrylic sheet panes 3 mm thick, with silicon, putty and nails wherever necessary. |
| 37 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement. 2 coarse sand: 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 13 (1 cement: 3 fine sand) as per standard design In 75x75 mm deep chase |
| 38 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS 13592 Type A, including jointing with seal ring conforming to IS 5382, leaving 10 mm gap for thermal expansion, (1) Single socketed pipes. 110 mm diameter |
| 39 | Providing and fixing stone tab with table rubbed, edges rounded and polished, of size 25x50 cm deep and 18 cm thick, fixed in urinal paisitions by cutting a chase of appropriate width win chase culter and embedding the stone in the chase with epoxy grout or with cement concrete 12.4 (1 cament 2 coarse sarvt gradev stone aggregate 6 mm nominal size) as per cirection of Engineer in-charge and finished smooth Granite Stone of approved shade |
| 40 | Providing and foxing wash basin with CI brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattem, including painting of fittings and brackets cutting and making good the walls wherever required White Vitreous China Flat beck wash basin size 550x400 mm with single 15 mm PTMT pillar cock |
| 41 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with CP. brass screws and washers complete |
| 42 | Providing and fixing toilet paper holder. CP brass |
| 43 | Providing and foxing water closet squatting pan (Indian type WC pan) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.VC flushing cistern, including flush pipe, with manually controlled device (handie lever) conforming to IS 7231. with all fittings and foxtures complete, including cutting and making good the walls and floors wherever required White Vitreous china Orissa pattern WC pan of size 580x440 mm with integral type foot rests |
| 44 | Providing and fixing MS stays and clamps for sand cast iron/ centrifugally cast (spun) iron pipes of diameter 75 mm |
| 45 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, vc fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge Concealed work, including cutting chases and making good the walls etc. 25 mm nominal outer dia Pipes |
| 46 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 20 mm nominal bore |
| 47 | Providing and fixing gun metal non-return valve of approved quality (screwed end): 25 mm nominal bore Vertical |
| 48 | Providing and foxing CP brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 |
| 49 | Providing and fixing Panel light 200x200mm in ceiling |
| 50 | Providing and fixing carbon steel gaivanised (minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2). counter sunk head, comprising of 10 m dia polyamide PA 6 grade sleeve, including drilling of hole in frame, concrete/ masonry, etc. as per direction of Engineer-in-charge 10 x 120 mm |
| 51 | Providing and fixing cramps of required size & shape in RCC/CC/Brick masonry backing with cement mortar 1:2 (1 cement 2 coarse sand), including drilling necessary hole in stones and embedding the cramp in the hole (fastener to be paid separately) Please Enable Macros to View BoQ information |
