|
| 1 | Earth work excavation in foundation hard soil including moorum, stoney earth mixed with boulders with all leads and lifts including dressing and levelling the bed and depositing the excavated earth away from the work site with all leads and lifts including cost of all labour and T&P and cess required for the work and etc. complete in all respect and as per the direction by the Engineer-in-charge. |
| 2 | Ground floor |
| 3 | Supplying, filling in foundation and plinth with sand in layers well watered and rammed including cost, conveyance, royalty of all the materials required for the work labour with T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 4 | Ground floor |
| 5 | Providing cement concrete (1:3:6) in foundation and plinth using 4cm size clean hard black granite crusher broken metal of approved quality from approved quarry including hoisting, lowering and laying in layers not exceeding 15cm thick to the required level, ramming watering and curing etc.complete including cost, conveyance, royalty taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge |
| 6 | Ground floor |
| 7 | Flyash brick masonry in cement mortar (1:6) in foundation & plinth using Flyash bricks of 23x11x8cm size having a crushing strength of not less than 75 kg./sq.cm including splays cutting, circular moulding, chamfering and cur belling, watering and curing etc. complete including cost, conveyance, royalty, taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 8 | Ground floor |
| 9 | Cement concrete of proportion (1:2:4) using 12mm size hard granite chips of approved quality from approved quarry including hoisting, lowering and laying concrete and compacting in layers not exceeding 15cm thick with proper packing and ramming each layer of concrete by means of vibrator including watering and curing etc.complete including cost, conveyance, royalty taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 10 | Ground floor |
| 11 | Providing R.C.C work of M-25 grade with 20mm and down graded clean hard crusher broken granite chips of approved quality from approved quarry including hoisting, lowering and laying concrete with necessary slope and smoothness to receive tar felting or terracing, watering and curing for four weeks,including centring, shuttering and finishing the exposed surface and ceiling smooth to receive white washing or painting providing grooves or beads and fan hooks as per requirement in ceiling where necessary, cost of water, including cost, conveyance, royalty taxes of all the materials and labour, T&P and cess etc. complete in all respect but excluding cost of M.S rods or Tor steel and binding wire 18 to 20 gauge and labour charges for straightening, cutting, bending and binding and tying the grills and placing in proper position as per specification and direction of the Engineer-in-charge. |
| 12 | Column base |
| 13 | Ground floor |
| 14 | Plinth beams |
| 15 | Ground floor |
| 16 | Columns & Beams |
| 17 | Ground floor |
| 18 | First Floor |
| 19 | Lintels |
| 20 | Ground floor |
| 21 | First Floor |
| 22 | Chajja |
| 23 | Ground floor |
| 24 | First Floor |
| 25 | Roof Slab |
| 26 | Ground floor |
| 27 | First Floor |
| 28 | Precast Slabs / Lofts / Shelves |
| 29 | Ground floor |
| 30 | Providing rigid, smooth centring and shuttering including false works and dismantling them after casting including cost, conveyance, royalty taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 31 | Ground floor |
| 32 | Cutting, bending, binding and tying the grills and placing in proper position as per drawing and design including cost, conveyance and taxes of M.S rods and binding wire with all labour T&P and cess required for the work etc. complete in all respect in all floors(weight of binding wires will not be considered as measurement of M.S rods) as per specification and direction of the Engineer-in-charge. |
| 33 | Ground floor |
| 34 | First Floor |
| 35 | Flyash brick masonry in cement mortar (1:6) in super structure using Flyash bricks of 23x11x8cm size having a crushing strength of not less than 75 kg./sq.cm including splays cutting, circular moulding, chamfering and cur belling, watering and curing etc. complete including cost, conveyance, royalty, taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 36 | Ground floor |
| 37 | First Floor |
| 38 | 20mm th Cement plaster in C.M (1:4) including punning over walls, finished smooth including watering curing and scaffolding with cost, conveyance, royalty, taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 39 | First Floor |
| 40 | 20mm th Cement plaster in C.M (1:6) finished smooth including watering curing and scaffolding with cost, conveyance, royalty, taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 41 | Ground floor |
| 42 | 16mm th Cement plaster in C.M (1:6) to brick work finished smooth including watering curing and scaffolding with cost, conveyance, royalty, taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 43 | Ground floor |
| 44 | First Floor |
| 45 | 12mm th Cement plaster in C.M (1:6) to brick work finished smooth including watering curing and scaffolding with cost, conveyance, royalty, taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 46 | Ground floor |
| 47 | First Floor |
| 48 | Providing fitting and fixing of false ceiling with aluminium anodised T section no. 3215 with 2' - 0\\" center to center, L section no. 1705 upto 15 micron on 4 walls to be fixed by means of steel screw and PVC plug and the aluminium grid 2'- 0\\" x 2' - 0\\" suspended from ceiling using 12.5 mm th Gypsum board size 6' x 4' including cost, coveyance of all materials, taxes, labour, T&P, cess, and hire charges of drilling machine, labour charges etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 49 | Ground floor |
| 50 | First Floor |
| 51 | Providing and fixing Vitrified tiles in floors, treads of steps and landing on 20mm th bed of cement mortar (1:4) (1 cement:4 sand) joined with neat cement slurry mixed with pigment to match the shade of tiles including rubbing, polishing including cost of tiles, conveyance, taxes & labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge |
| 52 | Ground floor |
| 53 | First Floor |
| 54 | Providing and fixing Glazed tiles in floors, treads of steps and landing on 25mm th bed of cement mortar (1:1) (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shade of tiles including rubbing, polishing including cost of tiles, conveyance, taxes & labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge |
| 55 | Ground floor |
| 56 | First Floor |
| 57 | Providing and fixing Glazed tiles in dados, skirting and rises of steps on 12mm th cement plaster (1:3) (1cement:3sand) joined with neat cement slurry mixed with pigment to match the shade of tiles, rubbing, polishing including cost of tiles, conveyance, taxes & labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge |
| 58 | Ground floor |
| 59 | First Floor |
| 60 | Providing and fixing Chequred tiles in floors, treads of steps and landing on 25mm th bed of cement mortar (1:1) (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shade of tiles including rubbing, polishing including cost of tiles, conveyance, taxes & labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge |
| 61 | Ground floor |
| 62 | First Floor |
| 63 | Providing and fixing Chequred tiles in dados, skirting and rises of steps on 12mm th cement plaster (1:3) (1cement:3sand) joined with neat cement slurry mixed with pigment to match the shade of tiles, rubbing, polishing including cost of tiles, conveyance, taxes & labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge |
| 64 | Ground floor |
| 65 | Finishing surface of walls with cement based wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding, staging charges with cost of all materials taxes, labour T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 66 | Ground floor |
| 67 | First Floor |
| 68 | Wall painting two coats with plastic emulsion paint of approved shade over a coat of priming on new work to give an even shade with approved shade with cost, conveyance, taxes of all the materials required for the work and labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 69 | Ground floor |
| 70 | First Floor |
| 71 | Distempering two coats with approved shade, over a coat of priming with cost, conveyance, taxes of all the materials required for the work and labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 72 | Ground floor |
| 73 | First Floor |
| 74 | Finishing walls with water proofing cement paint (Weather coat) of approved shade on new work two coats, over a coat of priming, to give an even shade with cost, conveyance, taxes of all the materials required for the work and labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 75 | Ground floor |
| 76 | First Floor |
| 77 | Dressed seasoned Sal wood work framed and fixed (wrought and put up) in trusses, purlins, frames of doors and windows and beams etc with cost, conveyance, taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 78 | Ground floor |
| 79 | First Floor |
| 80 | Providing 32mm piasal wood or local teak wood panelled shutters moulded panels with all labour, iron fittings, and wooden hinged cleats etc fitted and fixed complete in all respect, but excluding the cost of iron fittings with cost, conveyance, taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge |
| 81 | Ground floor |
| 82 | First Floor |
| 83 | Providing 25mm thick piasal wood or local teak wood fully glazed shutter 25mm style complete with iron fittings and wooden hinged cleats, etc. fitted and fixed in position for doors and windows including all labour charges, but excluding the cost of glass panes and iron fittings with cost, conveyance, taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge |
| 84 | First Floor |
| 85 | Supplying, fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality with frame, shutters and all fittings and fixtures etc complete including cost, conveyance, taxes, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 86 | Ground floor |
| 87 | Supplying, fitting and fixing of FRP Door Frame (GRP) of 75mm x 100mm size of approved design in proper position making good to the damges of walls of R.C.C or other structural etc. including mending or cutting sizes or grooves in chaukhats with cost, conveyance, taxes of all materials required for the work, labour and T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 88 | Ground floor |
| 89 | First Floor |
| 90 | Supplying, fitting and fixing of FRP Door Shutter (GRP) of 32mm thick of approved design in proper position making good to the damges of walls of R.C.C or other structural etc. including mending or cutting sizes or grooves in chaukhats with cost, conveyance, taxes of all materials required for the work, labour and T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 91 | Ground floor |
| 92 | First Floor |
| 93 | Providing, fabricating, transporting and supplying at site of M.S Doors, Windows, Grills and shutters of approved design with cost, conveyance, taxes of all materials required for the work, labour and T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 94 | Ground floor |
| 95 | First Floor |
| 96 | Labour for fixing of M.S doors and windows shutters of approved design in proper position making good to the damges of walls of R.C.C or other structural etc. including mending or cutting sizes or grooves in chaukhats with cost, conveyance, taxes, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 97 | Ground floor |
| 98 | First Floor |
| 99 | Painting two coats over a coat of primer with any approved paint with brush to wood/iron work including cost, conveyance, taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 100 | Ground floor |
| 101 | First Floor |
| 102 | Supplying fitting and fixing of Stain less steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with balustrade of size 32mm x 32mm x 2mm @ 0.90mtr c/c and stain less square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. including cost of all materials, taxes, labour, T&P, cess, and hire charges of drilling machine, labour charges etc. complete in all respect as per specification and direction of the Engineer-in-charge |
| 103 | Ground floor |
| 104 | Providing, fabricating, transporting, hoisting of G.I. Pipes and placing in position etc. complete including all cost, conveyance, taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge |
| 105 | Ground floor |
| 106 | Providing, fabricating, transporting, hoisting of G.I. Pipes and placing in position etc. complete including all cost, conveyance, taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge |
| 107 | Ground floor |
| 108 | Providing, fitting and fixing of Tata Dura shine colour sheets (0.47mm thick) in roof including drilling holes in wind ties & fixing of ridges, vallies,wind ties etc. including cost, conveyance, taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge |
| 109 | Ground floor |
| 110 | First Floor |
| 111 | Providing & laying filter media with granular crushed aggregates as per specification to a thickness of not less than 600mm with 40mm metal providing over the entire surface behind abutment, wing wall, return wall etc. with all labour, materials, T&P, royalty, taxes and CESS etc. complete as per specification and direction of the Engineer-in-Charge |
| 112 | Ground floor |
| 113 | Supplying and fixing of 80mm thick cement concrete interlocking paver block of M-40 grade of approved make, design, colour and size made by block making machine with proper compaction laid in required patten etc complete in all respect confirming to IRC SP-63-2018 including cost, conveyance, taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 114 | Ground floor |
| 115 | Supplying and fixing of Pre cast Kerb stone of size 600mm x 300mm x 150mm of M-30 grade of approved make, design, colour and size made by block making machine with proper compaction fixed in required patten etc complete in all respect confirming to IS5758:1984 including cost, conveyance, taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 116 | Ground floor |
| 117 | Dismentalling Brick or Stone Masonary Under 3.00mtr. Height etc complete. |
| 118 | Ground floor |
| 119 | Dismentalling & Removing old Damage R.C.C Column, Beam,Slab,Staircase,Landing, Lintel etc complete. |
| 120 | Ground floor |
| 121 | Supplying all materials,labour,T&P and fitting & fixing of 4.0 kgf/cm2 U-PVC soil waste ventilating pipes and fitting of the following O.D conforming to ISI No.13592/1992 to walls with nails bobbins and wooden plugs or earth work in excavation in all kinds of soil for laying in trenche including jointing with supply of approved rubber lubricant by non-heat application method/as per manufactures specification including tasting and refilling and trenches as per direction of E.I.C.(a)110mm dia.U-PVC SWR pipes |
| 122 | (b)110mm dia.U-PVC P-trap |
| 123 | (c)110mm dia.U-PVC SWR Single junction door |
| 124 | d.)110mm dia PVC SWR Nahani trap without Jally |
| 125 | (f)110mm dia.U-PVC SWR Offset |
| 126 | (g)110mm dia.U-PVC SWR plain bend |
| 127 | (i)110mm dia.U-PVC SWR vent cowl |
| 128 | (j)125mm dia CP greatings |
| 129 | (k)75mm dia.U-PVC SWR pipes |
| 130 | (l)75mm dia.PVC SWR plain bend |
| 131 | (m)75mm dia.PVC SWR door bend |
| 132 | Supplying all materials,labour,T&P cutting holes through brick/stone masonry works including making good the damages in cm(1:4)for taking HCI/PVC pipe & fitting etc. all complete as per PH specification and direction of E.I.C.(b)250mm thick wall |
| 133 | Supplying all materials,labour,T&P and fixing water closet,squatting pan (Indian type W.C pan/Orissa pattern squatting pan)duly embedded in cc(1:5:10)using 4cm size hard granite metal including fixing a pair of vitreous china 250mmx130mmx30mm footrest etc all complete as per specification and direction of the E.I.C.(a)580mm size Orissa pan(Nycer/Cera/Hindware/Parryware) |
| 134 | Supplying all materials,labour,T&P and fixing wash down water closet(E.W.C)with integral 'S' or 'P' trap to the floor with wooden plug and CP screw including jointing the trap with soil waste pipe in cm(1:1)etc all complete as per specification and direction of the E.I.C.(a)EWC with ‘P’ & ‘S’ trap plain (Nycer/Cera/Hindware/Parryware) |
| 135 | Supplying all materials,labour,T&P and fixing of plastic seat cover for EWC with chromium plated brass hinges and rubber buffer etc all complete as per specification and direction of the E.I.C. |
| 136 | Supplying all materials,labour,T&P and fixing wash basin with hole for pillar taps with cast iron or M.S. brackets painted white including cutting holes in walls and good the damages etc. all complete as per specification and direction E.I.C.(a)550mmx400mm size WHB(Neycer/Parrywear/Cerra/Hindware) |
| 137 | (b)Pedestrial for WHB(Neycer/Parrywear/Cerra/Hindware) |
| 138 | Supplying all materials,labour,T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specifications and direction of E.I.C.(a)CP Soap holder |
| 139 | Supplying all materials,labour,T&P and fixing mirror of superior glass mounted on 6mm thick A.C.sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of the E.I.C. (a)600mmx450mm Mirror |
| 140 | Supplying all materials,labour T&P and fixing standard size glass shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per PH specification and direction of E.I.C.(a)(125x600)mm size glass-shelf |
| 141 | Supplying all materials,labour,T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of E.I.C.(a)CP towel rail |
| 142 | (a)CP Towel Ring |
| 143 | Supplying all materials,labour T&P and fitting and fixing 10 Ltrs capacity PVC LL flushing cistern with a pair of CI/MS brackets complete with fittings such as syphonic arrangement,15mm nominal size brass/PVC ball valve with polythene float,CP/Brass handle,unions and couplings for connection with inlet,outlet,over flow pipes,32mm dia PVC flushbend,15mm dia PVC connection pipes including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting inlet pipe with supply main with etc all complete as per specification and direction of the E.I.C.(a)10 lit PVC L/L Cistern(Parry ware) |
| 144 | Factory made GIRID FRP or called GRP sandwich composite door shutter of 32mm thick laminated with two GRP skin with good grain finish fabricated using UV stabilised isoppthalic gel coat and one layer of 450 gsm E-glass chopped strand mat (CSM) impregnated with ortopathilic resin The thickness of the skins shall not be less than 1.50mm . Expanded polysryne ( EPS) structural foam panel of 29 mm tickness and a density of 20kg/cu.mts shall be used as core material wooden reinforcements made of sesasoned sal wood block of cross section not less than 28mm x 32mm and also necessary sal wood reinforcements for fitting the metal fittings such as lower bolts ,aldrops, handles etc. shall be provided . A structural adhesive compatible with (EPS)foam shall be used for bending the core material. the sal wood reinforcements and the skin The material and process for manufactuing te door shutter shall conform to RV -TIFAC components design centre's standards and specification and the door shutters tested in conformation to IS 4020-1998. The Finish of door shutter will be plain colour as per specification and direction of the Engineer in Charge. etc. complete |
| 145 | Factory made FRP( Altematly called GRP) door frame of size 75mm x 100mm fabricated using E - glass chopped strand mat (CSM) U.V stabilised inopathalic Gel coat and impregnated with inopathalic resin The thickness of the GRP skins shall not be less then 2.0 mm . The door frame consists of four segments which are provided with plug in socket arrrangement in-situ-in mould. The segments are plugged in and are joined together by means of srew. The GRP frame shall be provided with wooden reinforcement on six locations for high srew holding capacity for fixing metalic hold fast and shall be consolidated by filling with medium density foam / plaster of paris with fibre reinforcement , six number of 260mm x 25mm x 5mm size 'S' shaped M.S flat hold fast shall be provided with the frame. The material and process for manufacturing the finish of door frame shall conform to RV-TIFAC composites Design centre's standards and specifications . The finish of door frame will be plain colour white /Ivory/Beige/Light grey / Golden brown / Mahogany/ Teak wood /sand stone Champagne/Pastel blue or any other colour using high quality pigment complete in all respect as per specification and direction of the Engineer in Charge. etc. complete |
| 146 | Supplying all materials,labour,T&P and fixing porcelain glazed tiles in floors, on 25mm thick bed of cm(1:1) joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. all complete as per specification and direction of the E.I.C.(a)In Ground Floor |
| 147 | (b)In 1st Floor |
| 148 | Supplying all materials,labour,T&P and fixing porcelain glazed tiles in dados/skirtings on 12mm thick CP(1:3)joined with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing etc. all complete as per direction of the E.I.C.(a)In Ground Floor |
| 149 | (b)In 1st Floor |
| 150 | Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the E.I.C.a. Initial lift up to 1.50m |
| 151 | From 1.5m to 3.00m depth |
| 152 | Supplying all materials labour T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to work sitepayment of royalty taxes etc all complete as per direction of E.I.C. |
| 153 | Supplying all materials,labour,T&P and providing cc(1:3:6) with 4cm size hard granite metal including watering,curing,conveyance of all materials to worksite,payment of royalty,taxes etc all complete as per specification and direction of the E.I.C |
| 154 | Supplying all materials,labour,T&P and providing cc(1:1.5:3)with 12mm size HG chips including watering,curing and conveyance of all materials to work site,payment of royalty,taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 155 | Supplying all materials labour T&P and providing brickwork with KB bricks having crushing strength not less than 75kg/cm2 with dimensional tolerance +/-8% including watering,curing conveyance all materials to worksite payment of royality taxes etc. all complete as per specification direction of E.I.C. |
| 156 | Supplying all materials,labour,T&P and providing cement plaster on brick/stone work including watering, curring and conveyance of all materials to work site,payment of royalty,taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 157 | Supplying all materials labour T&P and providing cement punning for skirting including watering,curing, conveyance of all materials to worksite,payment of royality,taxes etc. all complete as per specification and direction of E.I.C. |
| 158 | Supplying all materials labour T&P and providing rigid and smooth centering & shuttering for RCC works including falsework and dismantling them after casting including conveyance of all materials to worksite, payment of royality,taxes etc. all complete as per specification and direction of E.I.C. |
| 159 | Supplying all materials labour T&P and providing MS reinforcement for RCC works including cutting, bending,binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge,conveyance of all materials to worksite,payment of royality,taxes etc. all complete as per specification and direction of E.I.C. |
| 160 | Supplying all materials labour T&P and providing RCC(1:1.5:3)using 12mm hg chips for RCC works including hoisting,laying,watering,curing,conveyance of all materials to work site,payment of royality, taxes etc. all complete as per specification and direction of E.I.C. |
| 161 | Supplying all materials labour T&P and fixing of RCC baffle wall precast with cc(1:1.5:3)using 12mm bhg chips and fitted to septic tank as per P.H. specification and direction E.I.C. |
| 162 | Supplying all materials labour T&P and Providing cement flush pointing(1:3) to brick masonary including watering,curing,conveyance of all materials to work site etc. all complete as per specification and direction of E.I.C. |
| 163 | Supplying all materials,labour,T&P and filling Foundation and Plinth with excavated earth including watering, ramming etc all complete as per direction of the E.I.C. |
| 164 | Supplying all materials,labour,T&P and constructing inspection chamber of the following sizes with cc(1:3:6)using 40mm size hg metal on bed,1st class KB Brickwork in cm(1:6)moulding and shaping the channel inside and benching with cc(1:1.5:3)using 12mm size hg chips,12mm thick CP(1:3)with punning to inside,cement flushpointing(1:3)to outside,RCC cover slab in cc(1:1.5:3)using 12mm size h.g. chips with RCC man hole cover,e.w. in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,conveyance of all materials to site,payment of royality,taxes etc. all complete as per approved specification and direction of E.I.C.(a)Inside size500mm x500mm x 460mm |
| 165 | (b)Construction of Gully Trap Chamber (0.25 x 0.25 inside Size) |
| 166 | (c)Construction of Manhole Chamber (910mmx910mmx910mm) |
| 167 | Supplying all materials, labour, T&P and laying in trenches PVC SWR soil waste ventilating pipes for sewer line of following dia in trenches (to slope or level)and jointing with supply of approved solvent cement by non-heat application method C.C (1:3:6) using 40mm size hard granite metal on bed of the trenches and all round concrete encashing with C:C (1:4:8) using 40 mm size H.G. metal, earthwork in excavation in trenches in all kinds of soil, refilling the same in a layer of 0.30mtr with watering, ramming and removing of surplus earth, testing the S.W. pipeline etc. all complete as per approved drawing, specification and direction of the E.I.C.110 mm dia PVC pipe line (Allround) |
| 168 | Supplying all materials, labour, T&P and constructing soakway pit of the following size with precast R.C.C rings joined loose gravel backing in the rear of well steining, RCC cover slab in CC (1:1.5:3) using 12mm HG chips, fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per approved specification and direction of the E.I.C.(a)Soak way Pit 1.20m dia x 2.00m Deep (Inside Size) |
| 169 | .Supplying all materials, labour, T&P and construction of masonry staging with providing 1st class K.B. Brick work in C.M.(1:6) of 0.46mtr height in staging, 12 mm cement plaster in C.M (1:6), R.C.C. Beam of 0.25mx0.30mx2.60m in C.C (1:1.5:3) using 12mm size H.G.Chips including centering, shuttering, bending and binding of rod etc watering, curring, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 170 | Supplying all material,labour,T&P and Fitting and Fixing of Rotational moulded polythene cylindrical vertical water storage tank conforming to IS:15701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jamnuts,including hoisting upto a height of 5mtr above GL & placing the tank in required position including conveyance of all materials to worksite,payment of royalty,taxes etc all complete as per PH specification and direction of the E.I.C.(a)2000 lits capacity on the roof of 1st floor |
| 171 | Supplying all materials,labour,T&P and providing&fixing to wall or ceiling and floor pvc pipes confirming to ASTM-D-1785/89(sch-80)and pipe fittings of the nominal bore with clamps including making good the wall,ceiling and floor all complete as per specification and direction of E.I.C.a. 25mm dia PVC(ASTM) pipe(Internal) |
| 172 | Supplying all materials,labour,T&P and cutting holes for taking G.I/PVC pipes and making good the damages as per the direction of E.I.C.(a)In Ground Floor |
| 173 | (a)In 1st Floor |
| 174 | Supplying all materials,labour,T&P and cutting holes in RCC,floors,roof,etc.upto 19cm thick for passing GI/PVC pipes and fitting etc. and repairing the holes after insertion of pipes etc. with cc(1:2:4)including finishing complete so as to make it leak proof as per direction of E.I.C.(a)In Ground Floor |
| 175 | Supplying all materials,labour,T&P and cutting grooves in pucca floor and walls for taking G.I/PVC pipes and making good the damages as per the direction of E.I.C.(a)In Ground Floor |
| 176 | (a)In 1st Floor |
| 177 | Supplying all materials,labour,T&P and fixing brass/CP fittings of thefollowing nominal bore with supply of all jointing materials complete as per specification and direction of E.I.C.(hindware/ parryware/Jaquar equivalent )(a)15mm dia CP SB Bib cock |
| 178 | (b)15mm dia CP(LB) Bib cock |
| 179 | (c)15mm dia CP Two way Bib cock |
| 180 | (e)15mm dia CP Angle stop cock |
| 181 | (e)15mm dia CP Pillar stop cock |
| 182 | (f)15mm dia CP Concealed stop cock |
| 183 | (g)15mm dia CP Revolving Shower with shower Arm |
| 184 | (h)15mm dia Health Faucet & 1.0m long Flexible pipe |
| 185 | (i)25mm dia PVC F.W.V. |
| 186 | (j)15mm dia CP Flange |
| 187 | Supplying all materials,labour,T&P and fitting and fixing of ISI mark 1.0HP single phase vertical water cool submersible pump set with discharge 1800/2200Lit/Hour & a head-55/70mtr.of reputed make(CRI/ KSB/Texmoor Equivelent) Including cost conveyance and taxes etc. all completes as per P.H. Specification and direction of E.I.C. |
| 188 | Supplying all materials,labour,T&P and fitting&fixing of 1.0HP single phase vertical submersible pump set with commissioning and testing etc. all completes as per P.H. Specification and direction of E.I.C. |
| 189 | Supplying all materials,labour,T&P and fitting & fixing of ISI mark DOL starter of reputed make like BCH or equivalent for 1.0HP single phase vertical submersible pump set including all cost conveyance & taxes etc. all completes as per P.H. Specification and direction of E.I.C. |
| 190 | Supplying all materials,labour,T&P and fitting & fixing of (2.5mm)2 3core copper flat suitable cable having ISI mark of reputed company like BCH/Finolex or equivalent & connecting the pump starter including cost conveyance & taxes etc. all completes as per P.H. Specification and direction of E.I.C. |
| 191 | Supplying fitting and fixing of plastic rope MS well cover,MS clamp,stainless steel short piece,bend & socket including all cost,taxes etc all complete as perdirection of the E.I.C. |
| 192 | Supplying fitting and fixing of HDPE Pipes & pipe fittings with making connection to pump set including all cost conveyance and taxes etc all complete as per direction of the E.I.C. |
| 193 | Earthwork in all kinds of soil in excavation of foundation trenches within 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth etc all complete as per direction of the E.I.C. |
| 194 | Supplying all materials, labour ,T&P and laying in trenches HDPE of the following nominal bore and pipe fittings including testing etc all complete as per direction of the E.I.C. |
| 195 | Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation(G.I/P.V.C/M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore onlyDrilling of 200mm dia bore 0 to 50.00mtr |
| 196 | Drilling of 150mm dia bore 50.00 to 150.00 mtr and above |
| 197 | Labour for lowering the following size of PVC casing pipes with or without slotted pipes as per necessity from ground level upto 300 mtrs depth and fitted and set up in perfectly vertical position including cutting and threading of blank pipes and slotted pipes and supplyinging and fixing of all jointing materials ,extra sockets and T&P etc. all complete and keeping the top of casing pipe threaded including plugging the tubewell to prevent entry of foreign materials.a.Lowering of 200mm dia PVC casing pipes 0 mtr to 50 mtrs |
| 198 | Cost of 200mm dia PVC schedule - 80 pipe |
| 199 | Cleaning&developing the tube well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per the direction of E.I.C. |
| 200 | Supplying all materials, labour, T&P and fixing bowl pattern urinal including connecting the urinal with waste pipe by means of white lead mixed with chopped hemp etc all complete as per specification and direction of the Engineer in charge.porcelain Halfstall Magnum Urinal(Parryware/Hindware/Neycer) |
| 201 | 15mm dia Urinal spreder |
| 202 | 32mm dia cp wate |
| 203 | Recessed wiring to light point with 1.5 sq.mm FR PVC insulatedsingle core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5Amp, 250 V piano type modular switch ISI marked and ceiling rose ISI marked mounted on MS box having front Modular base & cover of suitable size , MS box with 1 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex/ L&T / Anchor / Havels /HPL/ V Guard ) |
| 204 | -do- Group A |
| 205 | -do- Group B |
| 206 | -do- Group C |
| 207 | Recessed wiring to Fan Point in... |
| 208 | -do- Group B |
| 209 | -do- Group C |
| 210 | Recessed wiring to Call Bell Point in... |
| 211 | -do- Group C |
| 212 | Recessed wiring to Exhaust Fan Point in….. |
| 213 | -do- Group C |
| 214 | S/F of Angle holder replacing Ceilling Rose |
| 215 | S/F of 5A. Modular Switch & 5A. Modular Socket outlet of ISI marked on existing board |
| 216 | S/F of extension board of 6 modular Metal box with modular base & cover in recess including providing and fixing of 2 nos of 3pin 5/6amp modular socket out let & 2 nos of 5/6 amp piano type modular switch, connection, painting etc as required. |
| 217 | S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of 6 pin 15/16 amp. piano type Modular switch & Socket, connection, painting etc as required |
| 218 | S/F of Power point with 4 modular & 2 modular metal box with modular base & cover in recess including providing and fixing of 5 pin 15/16 amp. piano type Modular switch & Socket & Mini DP MCB, connection, painting etc as required for AC |
| 219 | S/F of 1 no of 5 pin 15/16 amp. Socket , 1 no of switch & 1 no of 15/16A top with modular mini MCB, in 6 modular box with cover with connection, painting etc as required for Inverter connection |
| 220 | S/F of 18 SWG Modular metal box of following sizes (Nominal size) in recess with suitable size of Modular base & cover in front including cutting the wall and making good the same in case of recessed conduit as required. |
| 221 | 2 Modular box with base & cover |
| 222 | 4 Modular box with base & cover |
| 223 | 12 Modular box with base & cover |
| 224 | Wiring for circuit / sub-main wiring along with earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20mm dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required (Make of wire - Finolex/L&T/Anchor/Havels/V-guard) |
| 225 | 2x1.5+1x1.5 (1.8.1) |
| 226 | 2x2.5+1x1.5 (1.8.2) |
| 227 | 2x4+1x1.5 (1.8.3) |
| 228 | 2x6+1x2.5 (1.8.4) |
| 229 | Inverter wiring (1x1.5smm) Copper wire (1.19.1) |
| 230 | S/F of 'B/C/D' series SP MCB of 5 - 32A amp rating (As per direction of engineer in charge) 240Volt for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required single pole (SP) (2.6.1) |
| 231 | S/F of 'B/C/D' series DP MCB of 5 - 32A amp rating (As per direction of engineer in charge) 240Volt for lighting and other loads in the 2 Way double door MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required (2.6.2a)+(2.3.1b) |
| 232 | Supply, Installation testing & commissioning of Main Switches (IS13940 part 3/1993) of following coopacity on existing surface/wall mounting & complete with H.R.C fuse links, inter connections earthing etc as required as per direction of Engineer Incharge (Make-Seimens/HPL/Anchor/L&T /Havels/C&S/R. K.) |
| 233 | S/F of MCB 12 way Single door (1.3.3) |
| 234 | S/F of 4 way (4+12) TPN MCB DB Single door (2.5.1) |
| 235 | Earthing with G.I. Earth pipe 3 mtr Long 40mm dia ISI marked including accessories & providing masonary enclosure with cover plate having locking arrangement & watering pipe with charcoal & salt as required (3.2) |
| 236 | Supply & laying 6 SWG G.I. wire in recess for loop earthing as required (3.17) |
| 237 | Supply, Installation, Testing & Commissioning of exhaust fan upto 300 mm sweep in the exising opening, including making the hole to suit the size of the above fan making good the damaged complete, connection, etc as required. (1.43) |
| 238 | S/F of Call bell/Buzzer(Ding dong type) ISI marked suitable for DC/AC single phase 230 volts complete as required. (1.30) |
| 239 | S/F of computer board consisting of 3 nos of 5amp modular plug and modular switch & 1 no of Mini MCB complete with wiring on 12 modular M.S. box with modular cover. |
| 240 | S/F of 18-25Watt L.E.D Tube light fitting with all accessories and connections (Make:HPL-Neptune Havells-Elite LED Pride Plus/PAC/Crompton-RetroPLL |
| 241 | Supply of 1200mm A.C. Ceiling fan with all accessories and connections with out fan regulator (Make:Usha-Striker Millenium/Crompton-Jura /Anchor-XL/Havels-Velocity/Spark/Orient-Summer pride ) |
| 242 | S/F step type fan regulator |
| 243 | S/F of 15mm dia down rod with all accessories (1.35+1.40) |
| 244 | Supply & fixing of superior type C.I bulk head fitting with 9W Led Bulb for general domestic use ISI marked square / oval type with premetallic glass cover provided with galvanized steel wire guard including necessary connections. ( M-5 ) |
| 245 | S/F of 30-35 wt. LED St. Light fitting with LED Electronic driver with all accessories & connection( Make- Crompton/Phillips/HPL/Polycab/Havells Orient/Panasonic) ) |
| 246 | S/F of fan hook 'S' type made of 16 mm MS rod for fixing in the Existing RCC Roof. |
| 247 | Provision of Armoured cable size 3 1/2 x50sqmm (26) |
| 248 | S/F of 12w Watt LED Bulb |
| 249 | S/F of 1.5T ,5Star,Inverter model, Split A.C Machine including out door stand (Make- Hitachi(V518PCBISH1)/Blue star(V518PCBISH1C)/Carrier(CAI19CE5R35F0)/Daikin/LG/Mitsubishi/O-General) |
| 250 | S/F of 2000VA/24V Invertor machine,Make-Heavy duty V-Turbo UPS-23509 (microtek)/PRIME 2250(V-GUARD)/EVO S 2300(LUMINOUS) and 180Ah tall tubular BatteryMake-Luminous /microtek/v-guard and 16A Delux plug Top with Luminous single Trolley for Inveryor Battery,2nos |
| 251 | Supply & fixing of 160 A TPN Panel board 1. 160A MCCB (Make- Legrand/Seimens/L&T/C&S/) & 100A kitkat & bus bar2. 63 A TPN MCB (Make- Legrand/Seimens/L&T/C&S/)- 2nos 3. 32A DP MCB (Make- Legrand/Seimens/L&T/C&S/)-4 nos 4. 100 A 4P Manual changeover (Make- Legrand/Seimens/L&T/C&S/)- 1nos5. Digital Volt meter & Ameter three phase 6. All accesories & Connection (Rating & Danger borad) Please Enable Macros to View BoQ information |
