|
| 1 | Electrical Works |
| 2 | Supply and Laying of 3.5C, 50 sq mm, 1.1kV XLPE Insulated Armoured Aluminum Cable A2XFY including all accessories, labour cost, T & P etc. complete work as per direction of EIC. |
| 3 | Supply and Laying of 4.0 C, 16 sq mm, 1.1kV XLPE Insulated Armoured Aluminum Cable A2XFY including all accessories, labour cost, T & P etc. complete work as per direction of EIC. |
| 4 | Supply and Fixing of Aluminum Lugs of size 50 sq mm including all accessories, labour cost, T & P etc. complete work as per direction of EIC. |
| 5 | Supply and Fixing of Aluminum Lugs of size 25 sq mm including all accessories, labour cost, T & P etc. complete work as per direction of EIC. |
| 6 | Supply and Fixing of Aluminum Lugs of size 16 sq mm including all accessories, labour cost, T & P etc. complete work as per direction of EIC. |
| 7 | Supply and Laying of 63 mm dia PN8 Medium Gauge HDPE Pipe including all accessories, labour cost, T & P etc. complete work as per direction of EIC. |
| 8 | Laying of one number 63 mm dia HDPE Pipe direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering including all accessories, labour cost, T & P etc. complete work as per direction of EIC. |
| 9 | Laying of one number XLPE power cable of 1.1 KV grade of 16 Sq mm size in the existing HDPE pipe as required including all accessories, labour cost, T & P etc. complete work as per direction of EIC. |
| 10 | Laying of one number XLPE power cable of 1.1 KV grade of 25 Sq mm size in the existing HDPE pipe as required including all accessories, labour cost, T & P etc. complete work as per direction of EIC. |
| 11 | Supply and Fixing of Brass compression gland for (35 mm) 3½ X 50 sq. mm 1.1 kV grade cable including all accessories, labour cost, T & P etc. complete work as per direction of EIC. |
| 12 | Supply and Fixing of BBrass compression gland for (28 mm) 4 X 16 sq. mm 1.1 kV grade cable including all accessories, labour cost, T & P etc. complete work as per direction of EIC. |
| 13 | Supply, installation, testing & commissioning of floor mounting front operated front access extensible type cubicle outdoor Partially Type Tested (PTT) panel totally enclosed, dust and vermin proof with IP-65 protection with hinged and lockable doors. CRCA sheets (16 SWG) including Busbars, interconnections, tinned copper crimping lugs, bonding to earth and painting suitable for use at 415 V, 3phase 4 wire 50 Hz system, and to withstand a fault level of 25 kAmp symmetrical for 1 sec at 415 V complete as per below specifications, as required as per direction of Engineer in Charge.: MAIN PANELINCOMING with 125A 4P (36kA) Thermal magnetic Release Type MCCB with Extended ROM with Roraty Handle, Spreader Terminal- 1 Set.50kN, Type-1+2, 3P+N SPD with 100 Amp 3 Pole HRC Fuse set-1 No.OUTGOING with 63 A 4P (36kA) Thermal Magnetic Release Type MCCB - 3 Sets.Multifunction Meter (I,V,KW,KVA, KWH, KVAH)- 1 No., and 150 A Aluminum Bus Bars. All switchboards shall have provision for entry of cables from the bottom as required. All live accessible parts shall be shrouded and all equipment shall be finger touch proof. The bus bars shall be insulated with heat shrinkable sleeves.SMC/DMC shrouds and busbar supports shall be used. |
| 14 | Supply, installation, testing & commissioning of floor mounting front operated front access extensible type cubicle outdoor Partially Type Tested (PTT) panel totally enclosed, dust and vermin proof with IP-65 protection with hinged and lockable doors. CRCA sheets (16 SWG) including Busbars, interconnections, tinned copper crimping lugs, bonding to earth and painting suitable for use at 415 V, 3phase 4 wire 50 Hz system, and to withstand a fault level of 25 kAmp symmetrical for 1 sec at 415 V complete as per below specifications, as required as per direction of Engineer in Charge.: SUB PANELINCOMING with 63A C-Curve TPN MCB- 1 Set.OUTGOING with 32A C-Curve TPN MCB- 4 Set16A C-Curve DP MCB-1 SetAll switchboards shall have provision for entry of cables from the bottom as required. All live accessible parts shall be shrouded and all equipment shall be finger touch proof. The bus bars shall be insulated with heat shrinkable sleeves.SMC/DMC shrouds and busbar supports shall be used. |
| 15 | Supply and Fixing of Earthing with GI Plate 600 mm x 600 mm x 3 mm thick including accessories, providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc with charcoal / coke and salt as required including all accessories, labour cost, T & P etc. complete work as per direction of EIC. |
| 16 | Supply, Installation & comissioning of GI insulated flat of size 25X4 mm including all accessories, labour cost, T&P etc complete work as per Direction of EIC. Please Enable Macros to View BoQ information |
