Tender For Renovation Of Rab At 2Nd Floor Of Main Building Csir Complex Pusa New Delhi., Delhi-Delhi

TDR : 55383375

Tender Notice
BOQ

5 Days Left

Delhi , Delhi

Tender Brief : Tender For Renovation Of Rab At 2Nd Floor Of Main Building Csir Complex Pusa New Delhi.

Document Fees
₹ 1000 /-

EMD
₹ 212755.0 /-

Tender Value
₹ 1.06 Crore /-

Submission Date
19-05-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Sub-Head: 1: Civil Work
2	Carriage of material by mechanical transport including loading, unloading and stacking out side municipal limits upto lead of 20 KM . Lime, morum, building rubbish .
3	Half brick masonry with common burnt clay F.P.S ( non modular ) bricks of class designation 7.5 in superstructure above plinth level upto floor V level. Cement Mortar 1:4( 1 cement : 3 coarse sand)
4	Extra for providing and placing in position 2 nos. 6mm dia M.S. bars at every third course of half brick masonry.
5	Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished) machine cut for lift lobby cladding, kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edge to give high gloss finish etc. complete at all levels. Granite of any colour and shade.
6	area of slab up to .50 sqm
7	Area of slab over .50 sqm
8	Providing edge moulding to 18mm thick marble stone counters, vanities etc ......... EIC. Grenite work.
9	Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia & length ( hold fast lugs or dash fastener shall be paid for seperately ) : Second class teak wood
10	Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters :35 mm thick including ISI marked stainless steel but hinges with necessary screws :
11	Extra for providing lipping with 2nd class teak wood battens 25mm minimum depth on all edges of shutters (overall area of door shutter to be measured)
12	Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface with Decorative veneer facings of approved manufacture
13	Providing and fixing IS : 3564 marked aluminium extruded section body tubular type universal hydraulic door closer with double speed adjustment with necessary accessories and screws etc. complete.
14	Providing and fixing aluminium tower bolts ISI marked anodised(anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :
15	300 x 10 mm
16	100x10mm
17	Providing and fixing partition upto ceiling height consisting of G.I. frameand required board, including providing and fixing of frame work made ofspecial section power pressed/ roll form G.I. sheet with zinc coating of120 gms/sqm(both side inclusive), consisting of floor and ceiling channel50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed tothe floor and ceiling at the spacing of 610 mm centre to centre withdash fastener of 12.5 mm dia meter 50 mm length or suitable anchorfastener or metal screws with nylon plugs and the studs 48 mm widehaving one flange of 34 mm and other flange 36 mm and 0.50 mm thickfixed vertically within flanges of floor and ceiling channel and placed ata spacing of 610 mm centre to centre by 6 mm dia bolts and nuts,including fixing of studs along both ends of partition fixed flush to wall
18	with suitable anchor fastener or metal screws with nylon plugs at spacingof 450 mm centre to centre, and fixing of boards to both side of framework by 25 mm long dry wall screws on studs, floor and ceiling channelsat the spacing of 300 mm centre to centre. The boards are to be fixed tothe frame work with joints staggered to avoid through cracks, M.S.fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5mm each) to be provided at the horizontal joints of two boards, fixed tothe studs using metal to metal flat head screws, including jointing andfinishing to a flush finish with recommended jointing compound, jointingtape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisherand two coats of primer suitable for board as per manufacturer's specifications & direction of Engineer -in- Charge all complete. 75 mm over all thickness partion with 12.5 mm thick double skin fire rated board conforming to IS: 2095 Part-1
19	Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.00mm thick
20	Providing and laying polished Vitrified Dual Charged tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved brand and manufacturer, in all colours & shade, in skirting , riser of steps , laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS 15477 in average 6mm thickness including grouting of joints (payment for grouting of joints to be made seperatly). Size of tile upto 600x600mm
21	Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm
22	Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.(approved make superem/phenolux or equivalent.(Pressure 6kg sqcm)
23	Single tee with door110x110x110 mm
24	Bend 87.5°(PVC Elbow)110 mm bend
25	Providing and fixing at all height false ceiling including providing and fixing of frame work made of special sections power pressed from M.S. sheet and galvanised in accordance with zinc coating of grade 350 as per IS : 277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with dash fastener 12.5mm diax40mm long with 6mm dia bolts to the angle hangers of 25x25x0.55mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45x15x0.9mm running at the rate of 1200mm centre to centre to which the ceiling section 0.5mm thick button wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be fixed in a direction perpendicular to G.I. channel with connecting clips made out of 2.64mm diax230mm long.
26	G.I. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre to centre with 25mm long drive-all screws @ 230mm interval including jointing and fixing to a flush finish of tapered and square edges of the board with recommended filler, jointing tapes, finisher and two coats of primer suitable for board as per manufactures specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of the Engineer in Charge but excluding the cost of painting with :12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS Certification marks)
27	Providing and fixing tiled false ceiling of approved materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main \\"T\\" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross \\"T\\" of size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings,fixtures, smoke detectors etc. Main \\"T\\" runners to be suspended from ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.
28	Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending.
29	12mm cement plaster of mix: 1:4 (1 cement :4 coarse sand)
30	Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete
31	Applying one coat of cement primer of approved brand and manufacture on wall surface :Cement Primer
32	Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
33	Wall painting with acrylic emulsion paint ,having VOC (volatile organic compound ) content less than 50 grams/ litre of approved brand and manufacture including applying additional coats of whereever required, to achive even shade and colour.Two Coats
34	Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
35	Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 metres lead. With cement mortar 1:4 (1cement :4 coarse sand)
36	Providing and fixing 150mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete
37	Providing and fixing bright finished brass hard drawn hooks and eyes: 250 mm
38	Demolishing Brick work manually / by machanical means including stacking of servicable material and disposal of unserviceable material within 50 metre lead as per direction of EIC. In cement mortar
39	Taking out doors, windows and clerestory window shutters (steel or wood or aluminium) including stacking within 50 metres lead :
40	Of area 3 sq. metres and below
41	Of area beyond 3 sq. metres
42	Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metre lead for thickness of tile 10mm to 25mm
43	Dismantling cement asbestos, gypsum ceiling, wall /Aluminium stripes ceiling or other hard board ceiling or aluminium and wooden partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead.(Note: Nothing extra will be paid for shifting / loading /unloading of the dismantaled material from third floor to ground floor of the office building.)
44	Dismantling GI pipes ( external work ) including excavation and refilling trenches after taking out the pipes , mannually by machanical means including stacking of pipes within 50metres lead as per direction Engineer in charge. 15mm to 40 mm nominal bore
45	Dismantling of flushing cistern/wash basin /EWC of any size including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.
46	Providing and fixing white vitreous china flat back half stall urinal of size 590x375x390 mm with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required .
47	Providing and fixing 8mm dia C.P./ S.S. Jet with flexible tube upto 1 metre long with S.S triangular plate to european type W.C. of Quality and make as approved by Engineer-in-charge.
48	providing and fixing CP brass toilet paper holder
49	Providing and fixing PTMT Bottle Trap for Wash basin and sink. Bottle trap 31mm single piece moulded with height of 270mm, effective length of tail pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm minimum water seal, weighing not less than 260gms.
50	Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour. weighing not less than 105 gms.
51	Providing & Fixing PTMT towel rail complete with brackets fixed to wooden cleats with C.P. brass screws with concealed fittings arrangements of approved quality colour. 600mm long towel ril with total lenghth of 645mm, width 78mm and effective height of 88mm, weighing not less than 190 gms. dash fastener drilling etc. complete with All respect as per direction of Engineer in Charge
52	Providing and fixing infrared sensor for urinal having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side,including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-incharge.
53	Providing and fixing Chlorinated polyvinyl Chloride (CPVC) pipes , having thermal stability for hot and cold water supply , including all CPVC plain & threaded fittings , i/c fixing the pipe with clamps at 1m spacing . This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in charge. Concealed work , including cutting chasis and making good the walls etc .
54	20mm nominal bore outer dia pipe
55	32mm nominal bore outer dia pipe
56	Providing and fixing C.P. brass long body bib cock of approved quality (jaquar make or equivalent) conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore
57	Providing & Fixing C.P. brass angle valve for basin mixer and geyser points of approved quality (jaquar make or equivalent) conforming to IS 8931 - 15 mm nominal bore
58	Providing and fixing C.P brass extention nipple ( size 15mmx50mm) of approved make and quality as per direction of EIC.
59	Providing & Fixing PTMT grating of approved quality and colour, Circular type 100 mm Dia. Nominal bore
60	Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and paneling to be paid for separately) :
61	For fixed portionPowdwer coated aluminium (minimum thickness of powder coating 50 micron)
62	For shutters of doors, windows' & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost pvc neoprene gasket required (Fittings shall be paid for separately).Powdwer coated aluminium (minimum thickness of powder coating 50 micron)
63	Providing and fixing glazing in aluminium door, window, ventilator shuttersand partitions etc. with EPDM rubber / neoprene gasket etc. complete as perthe architectural drawings and the directions of engineer-in-charge . (Cost ofaluminium snap beading shall be paid in basic item):With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)
64	Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand & manufacture including providing & fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete. as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).
65	Providing and fixing Ist quality digitally printed, DGVT/ PGVT ) wall tiles of size up to 1200x600mmconforming to IS : 15622 (thickness to be specified by the manufacture ) of approved make in all colours, shades except burgundy , bottle green, black of size 600x300mm (digital printed) as approved by Engineer-in-Charge in walls, skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
66	Providing and laying Ceramic glazed floor tiles upto size 450x450 mm(digital printed) (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigment etc., complete.
67	Providing and fixing white vitreous china wall hung type water closet with seat and lid, 10 litre low level white vitreous china flushing cistern & CP flush bend with fittings & CI brackets , including painting of fittings and brackets,cutting and making good the walls and floors where ever required. all compete as per the direction of Engineer in Charge
68	Providing and fixing under counter white wash basin of size 560mm x 470 mm of make CERA, parry ware or eqivalent with C.I./M.S. brackets, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required
69	Providing and fixing CP brass sensotronic sensor faucet for washbasin with 175mm extension body. All complete as per direction of EIC.
70	Providing & Fixing hand Spray (Health Faucet) of Jaquar make or equivalent with 8mm dia 1m long PVC tube of approved brand as per direction of Engineer-in-charge.
71	Providing and fixing specially designed superior quality and fancy looking mirror with backing ply and frame fixed to rawl plugs with CP brass screws complete in all respect.
72	Providing and fixing 12 mm thick frameless toughened glass partition of approved brand and manufacture, including providing & fixing top & bottom fixings arrangement fittings all complete as per direction of Engineer -in -Charge. ( Nothing extra will be paid rgarding fittings etc. )
73	P& F designer frosted film of 3M and Garware or its equivalent on toughened glass partition and doors as per required pattern complete as per direction of Engineer-in-Charge
74	Providing &Fixing 18/19 mm thick commercial wooden board ( termite proof) over the partition ,walls fixed with nails/screws and for making of cupboards, Overhead storage and for support of toughened glass from roof etc.complete with all respect and as per the direction of the Engineer in Charge.
75	Providing & Fixing Vertical blinds 100mm with soft textured acrylic of any shade of Vista/Mac or equivalent make of approved quality,colour on the existing windows including cost of all materials such as brackets,plugs, screws etc. complete in all respect as per the the direction of Engineer in Charge.
76	Providing and fixing double action hydraulic floor spring of Ozone make catalogue no. FS 9400 or equivalent & IS : 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. With stainless steel cover plate.
77	P/F Set of of SS handles of 450 mm to 600 mm long of Ozone or equivalent make for doors match with existing door.
78	Providing fixing SS glass door lock with strike box (without cut out) for frame less toughened glass doors match with existing door fittings with SS screws etc. complete as per direction of Engineer-in-charge
79	Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight Mineral Fiber false ceiling tiles of approved texture of size 600 x 600 mm in true horizontal level, suspended on concealed inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size panel to from Concealed grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel sheet with the help of rawl plugs and laying 20 mm thick densified edges Mineral Fiber ceiling tiles of approved texture in the grid, including, cutting/ making opening“for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size as per manufacture's specifications fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips. For all heights, as per specifications, drawings and as directed byEngineer-in-Charge. Note :- Only Mineral Fiber false ceiling area will be measuredfrom wall to wall. No deduction shall be made for opening (cut outs) having area less than 0.30 sqm.The Mineral Fiber ceiling tile shall have NRC value of 0.50 (Minimum), light reflection > 85%, non- combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity <0.043w/mK.
80	Providing & Fixing reflective type Sun control film of Garware or its equivalent make of approved quality colour as per the direction of Engineer in Charge including fixing into the existig windows/ door glass complete with all respect as per the the direction of Engineer in Charge.
81	Providing and fixing bright finished SS floor door stopper of Ozone or equivalent make for toughened glass doors with necessary screws etc complete.
82	Providing and applying mirror finish melamine polishing on wood work (two or more coats so as to achieve mirror finish) complete in all respect :
83	Providing and fixing Stainless steel connection pipe with brass unions : 45 cm length , 15 mm nominal bore
84	Providing and fixing on wall face un plasticised Rigid PVC soil waste/drain/waste water pipes conforming to ISI marked approved make supreme/phenolux or equivalent including jointing with seal ring conforming to relevent IS including 10 mm gap for thermal expansion.(Pressure 6kg/sqcm)110 mm diameter
85	Providing and fixing SS tower bolts ISI marked to required colour or shade with necessary screws etc. complete : upto size 300x10mm
86	Providing and fixing SS door handles, ISI marked, transparent or dyed to required colour or shade, with necessary screws etc. Complete up to size :250 mm
87	Providing and fixing aluminium window handles, ISI marked, transparent or dyed to required colour or shade, with necessary screws etc. completeup to size :125 mm
88	Providing and fixing SS Sliding door bolt for doors All complete as per direction of EIC.
89	Providing and fixing Stain less steel / Acrylic letters with SS body in thickness all complete as direction of EIC.
90	Providing and fixing korean stone of desired colour on reception table and washbasin counters of toilets all complete as per direction of EIC.
91	Providing & Fixing 8 mm thick of Euro/Vista make laminated wooden flooring. including preparation of surface, making the surface properly levelled with approved chemica,PVC sheet and backing material complete with all respect as per manufacturers specifications and as per the direction of Engineer -in -Charge.
92	Providing & Fixing Laminated wooden skirting of Vista, Euro make or its equivalent complete with all respect as per the direction of Enginer in Charge.
93	Supplying of Labour for shifting of office and lab furniture to basement, Nothing extra will be paid for shifting of material upto 4 floors.
94	Finishing walls with textured exterior paint of required shade: New Work( Two or more Coats applied @3.28 Ltr/ 10 sqm) over and including priming coat of exterior primer applied @2.20 KG/10 sqm.
95	Prviding and fixing of designer Acrylic sheet of any colour and design, thickness upto 3mm on wall coloums wooden partion etc all complete as per direction of EIC. ( Note : Refer Drawing No.
96	Providing & Fixing of 3D washable Wall paper of approved design complete as per direction of Engineer in charge.
97	Providing and fixing bright ChromiumPlated brass 100mm cylindrical lock with 6 lever with necessary screws etc. complete in all respect ( Best make of approved quality) & as per direction of Engineer- in- Charge. [ Basic Price of the material is Rs. 1000/- each]
98	Providing &Fixing 8 mm thick commercial wooden board ( termite proof) over the partition ,walls fixed with nails/screws and for making of cupboards, Overhead storage etc.complete with all respect and as per the direction of the Engineer in Charge.
99	Providing & Fixing 12mm thick MDF pannel board with laser cut 2D & 3D designs of size up to size (8 ft. x 4 ft), finished with PU paint and fixed with nails/screws on walls , partitions and wooden partitions,ceilings etc. - Complete. As per direction of engineer in charge
100	Providing and fixing 6 mm thick Plainiaque evolution lacquered coloured glass on wall panel of requried size, Fixed on 18/19 mm plain commercial board with wooden/G.I/stell frame work,all complete as per the drawing & directions of engineer-in-charge.( Frame work & backing board shall be paid for separately).
101	Wall Paneling Specification :-Providing and fixing Charcoal Stone look Sheet (High Gloss sheet) and WPC (Wood Plastic Composite Board) FLUTED Wall Paneling with Grooved , 25 mm TO 50MM with lineal perforations.The panels shall be (decorative lamination on one side and other sides balancing lamination ) grade -1 with for seamless mounting. The back of the panelsfixed on stud of Knurling G I section of prime quality cold rolled steel as per IS 513 hot dipped galvanized 120 gsm as per BS 2989 and zinc coating as per IS 277 of Knurling GI-48 mm are to be fixed with nylon plastic sleeves and wooden screws to from the proper framework . as per manufacturer's specification as per direction of Engineer-in-Charge.
102	Providing & Fixing 18/19mm thick MDF board of size up to size (8 ft. x 4 ft), finished with glossy PU paint and fixed with nails/screws on walls ,for partitions, for cabinets, for ceilings, for wall pdesigns and wall panelling etc. - Complete. As per direction of engineer in charge
103	Providing and fixing powder coated telescopic drawer channel 300 mm to 450mm long with necessary screws etc. compete as direction of engineer in charge.
104	Sub Head -2 : Buyback Items
105	Buy back the dismantalled existing Aluminium windows & angle frames of windows of ashorted size wooden doors etc and taking out CSIR complex pusa campus premises including loading unloading and transportation etc complete. The weight of the material will be ascertained on the basis of the difference of loaded vehicle and the tare weight of the vehicle after weighing the same at weigh Bridge (Dharm kaanta). The charges of weighing will be borne by the contractor. (Note: Nothing extra will be paid for shifting / loading /unloading of the dismantaled material from fifth floor to ground floor of the office building.)
106	Sub Head -3 : Furniture Items
107	Providing and placing of Executive Table of Size 2100mm x 900mm with ERU 1200mm Made of 25mm Thick Pre-laminated twin board . Edge banded with matching 2 mm thick PVC lipping.Soft closing access flap with in-build power box are provided on work surface for wire management.Modesty Panel-Made of 25mm Thick Pre-laminated twin board , Edge banded with matching 2 mm thick PVC lipping.Under-structure-Made of 25mm Thick Pre-laminated twin board , Edge banded with matching 2 mm thick PVC lipping.Hinge DoorStorage-Made of 25mm Thick Pre-laminated twin board , Edge banded with matching 2 mm thick PVC lipping.Handle is provided for ease of opening.Storage is provided with cam lock for security. Integrated Pedestal -Made of 25mm Thick Pre-laminated twin board , Edge banded with matching 2 mm thick PVC lipping.Drawer fronts made of 25mm thickMDF one side pre-laminate board confirming toIS-14587:1998 with 0.4mm PVC membrane pressed on to top Pedstal shall be with two drawers & one filing cabinet of suitable size to be placed below with KBPT plus CPU trolley which Uses powder coated 400 MM long metalPanel Drawer Slides. Drawer extension is 325 MM.Drawers have a soft closing & anti slam mechanism. All the prelam Boards shall of E1-P2 grade and approved shade confirming to IS-12823:1990. The drawers of pedestal shall be provided with locks, handles and necessary Hardwares etc .Over all The item should be as per the ManufacturersStandard specifications ( from attached List of Make ).
108	(Back Unit (SIZE 1800Wx500Dx1800H))Providing and placing of Back unit of Size 1800mm W x 500mm D x 1800mm H Made of 25mm Thick Pre-laminated twin board , Edge banded with matching 2 mm thick PVC lipping.Slide Door Unit-Made of 25mm Thick Pre-laminated twin board , Edge banded with matching 2 mm thick PVC lipping for body panels like side, bottom,back and shelves.Shutters are made of 25mm thick MDF one side pre-laminate board with 0.4mm PVC membrane pressed on to top.Shutters have a soft closing & anti slam mechanism.Display/StorageUnit-Made of 25mm Thick Pre-laminated twin board , Edge banded with matching 2 mm thick PVC lipping for bodypanels like side,back and shelves. Doors are made of 25mm thick MDF one side pre-laminate board with 0.4mm PVC membrane pressed on to top.Top panel of display unit Made of 25mm thick MDF one side pre-laminate board with 0.4mm PVC membrane pressed on to top. All the prelam Boards shall of E1-P2 grade and approved shade conforming to IS;12823:1990.the back unit shall be provided with locks, handles and necessary Hardwares etc. Over all The item should be as per the Manufacturers Standard specifications ( from attached List of Make ).
109	High Back Chair with head rest (Head Chair): Supplying and placing in position revolving chair having Overall size of Chair Width of Chair 76.0+-cm, Depth of Chair 76.0+- cm as measured from pedestal below. Height from ground 117.0 to 132.0 cm. Seat height 45.0 to 54.0 and back shall be (W)48.5cm, (H)62.0cm & size of seat shall be (W)51.0cm x (D)52.5cm. The cushioned seat assembly shall consists of insert moulded polyurethane foam upholstered with foam laminated mesh fabric. the insert moulded foam is assembeled over a load bearing plastic seat cover. The back shall made up of two piece injection moulded frame.
110	The inner frame shall be upholstered with mesh fabric and mounted on the main assembly. Aarmrest shall be injection moulded with height adjustable in 3 steps and width adjustable up to 20mm. The mechanism of chair shall have following features:360 degree revolving type, Front pivot Synchro mechanism, Tilt tension adjustment, 3 position tilt limiter with Anti-Shock feature. Spine bracket shall made of Aluminium diecast piece connecting back with mechanism. Neck rest assembly shall made up of polyurethane foam upholstered with foam laminated mesh fabric. The neck rest assembly is mounted on the top of back. it can be adjusted up-down and has regular adjustment of 30 degree. The chair shall be provided with pneumatic height adjustment which shall have stroke of 9.0 +/- 0.3 cm. The pedestal shall be made of die-cast polished aluminium. it shall be fitted with 5 nos twin wheel castor and should be injection moulded in black nylon. The item should be as per the Manufacturers Standard specifications ( from attached List of Make ) .
111	Mid Back Chair without head rest (Conference Chair for Head Room) : Supplying and placing in position revolving chair Overall size Width of Chair 76.0+-cm, Depth of Chair 76.0+- cm as measured from pedestal below, Height from ground 100.0 to 109.0 cm. Seat height 45.0cm to 54.0cm and Size of back shall be (W) 48.5cm, (H)62.0cm & size of seat shall be (W)51.0cm x (D)52.5cm. The cushioned seat assembly shall consists of insert moulded polyurethane foam upholstered with foam laminated mesh fabric. the insert moulded foam is assembeled over a load bearing plastic seat cover. The back shallmade up of two piece injection moulded frame. The inner frame shall be upholstered with mesh fabric and mounted on the main assembly.
112	.armrest shall be injection moulded with height adjustable up to 3 steps and width adjustable up to 20mm. The mechanism of chair shall have following features:360 degree revolving type, Front pivot Synchro mechanism, Tilt tension adjustment, 3 position tilt limiter with Anti-Shock feature. Spine bracket shall made of Aluminium diecast piece connecting back with mechanism. Neck rest assembly shall made up of polyurethane foam upholstered with foam laminated mesh fabric. The neck rest assembly is mounted on the top of back. it can be adjusted up-down and has regular adjustment of 30 degree +/-2 . The chair shall be provided with pneumatic height adjustment which shall have adequate stroke. The pedestal shall be made of die-cast polished aluminium. it shall be fitted with 5 nos twin wheel castor. The size of the pedestal shall be 66.0 +/- 0.5 cm pitch-centre-dia (76.0 +/- 1.0 cm with castors). The twin wheel castors shall be injection moulded in black nylon. The item should be as per the Manufacturers Standard specifications ( from attached List of Make ) .
113	Sofa 3 Seater :Supplying and Placing 3 seater sofa of size 2050mm ( ± ) x 900mm ( ± ) x 850mm ( ± ). The seat is made of PU foam with Density 28± 2 kg/cu.mtr having an additional top layer of super soft PU foam in Density 32 ± 2 kg/cu. upholstered with fabric or leatherette. The back is made of PU foam with Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric or leatherette.
114	Understructure is made up of 1.2±0.1 cm. thick hot pressed plywood (moisture resistance & termite proof) & pinewood of cross section devoid of major knots & surface defects 6 nos. per seat & 3.8 mm Dia zigzag spring assembly is mounted over understructure for cushioning purpose 6 nos. per seat & 3.8 mm Dia zigzag spring assembly is mounted over understructure for cushioning purpose. It is a welded assembly made in Stainless steel (grade SS 202) tube & plate with plastic endcap. Over all The item should be as per the Manufacturers Standard specifications ( from attached List of Make ).
115	Sofa 2 Seater :Supplying and Placing 2 seater sofa of size 1460mm ( ± )W x 905 ( ± ) D x 855 ( ± ) H. The seat is made of PU foam with Density 28± 2 kg/cu.mtr having an additional top layer of super soft PU foam in Density 32 ± 2 kg/cu. upholstered with fabric or leatherette. The back is made of PU foam with Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric or leatherette.
116	Understructure is made up of 1.2±0.1 cm. thick hot pressed plywood (moisture resistance & termite proof) & pinewood of cross section devoid of major knots & surface defects 6 nos. per seat & 3.8 mm Dia zigzag spring assembly is mounted over understructure for cushioning purpose 6 nos. per seat & 3.8 mm Dia zigzag spring assembly is mounted over understructure for cushioning purpose. It is a welded assembly made in Stainless steel (grade SS 202) tube & plate with plastic endcap. The Over all item should be as per the ManufacturersStandard specifications ( from attached List of Make ) .abcd
117	Sofa 1Seater :Supplying and Placing in place of 1 seater sofa of Size 860 ( ± )W x 900 ( ± )D x 855 ( ± )H. The seat should be made of PU foam with Density 28 ± 2 kg/cu.mtr having an additional top layer of supersoft PU foam with Density 32 ± 2 kg/cu. Seat should be upholstered with fabric or leatherette. 2) BACK FOAM: The back should be made of PU foam with Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric or leatherette. Understructure should be made up of 1.2±0.1 cm. thick hot pressed plywood (which also shall be resistance and termite proof as per IS:303.) and pinewood of cross section deviod of major knots and surface defects 6 nos. per seat and 3.8mm dia. zigzag spring assembly is mounted over understrucrure for cushioning effect. It should be a welded assembly made in Stainless steel (grade SS 202) tube & plate with plastic endcap. The Over all item should be as per the Manufacturers Standard specifications ( from attached List of Make ).abcd
118	Centre Table (Size 1120x600x351mm): Supplying and placing in position center table having size Width of table= 112.0 cm, Depth=60.0 cm, height=35.1 cm made of Glass shall be 12+/-0.3mm thick black tinted toughened glass UV glued with bushes made in SS 202 grade for fixing with understructure. It shall be a welded assembly made in SS-202 grade having dia. 12+/-0.04 as per IS:1762 and glass edges machin polished. The Over all item should be as per the Manufacturers Standard specifications ( from attached List of Make ).
119	Corner Table (Size 600x600x351mm): Supplying and placing in position side table having size of table Width = 60.0 cm, Depth=60.0 cm, height=35.1 cm. Glass shall be 12+/-0.3mm thick black tinted toughened glass UV glued with bushes made in SS- 202 grade for fixing with understructure with polished edges. It shall be a welded assembly made in SS202 grade having dia. 12+/-0.04 as per IS:1762.The Over all item should be as per the Manufacturers Standard specifications ( from attached List of Make ).
120	MainTable +ERU, side unit (Executive Table 1800mmX900mm with ERU 1200mm):Providing and placing of Executive Table of Size 1800mm x 900mm with ERU 1200mm Made of 25mm Thick Pre-laminated twin board . Edge banded with matching 2 mm thick PVC lipping. and the other work Surface is Made of 25mm thick MDF one side pre-laminate board with 0.4mm PVC membrane pressed on to top. Softclosing access flap with in-build power box are provided on work surface for wire management. Modesty Panel:Made of 25mm thick MDF one side laminate board with 0.4mm PVC membrane pressed on to top Under- structure:Made of 25mm Thick Pre-laminated twin board , Edge banded with matching 2 mm thick PVC lipping. Integrated Pedestal:Made of 25mm Thick Pre-laminated twin board , Edge banded with matching 2 mm thick PVC lipping. Drawer fronts made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top pedstal shall be with two drawers & one filing cabinet of suitable size to be placed below with KBPT plus CPU trolley which Uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti slam mechanism. All the prelam Boards shall of E1-P2 grade and approved shade conforming to IS;12823:1990.the drawers of pedestal shall be provided with locks, handles and necessary Hardwares etc .Over all The item should be as per the Manufacturers Standard specifications ( from attached List of Make ).
121	High Back Chair With Head rest (Executive Chair):Supplying and placing in position revolving chair having overall size Width of Chair 76+-cm, Depth of Chair 76+- cm as measured from pedestal below. Height of back from ground 95.5 to 105.5cm. Seat height 43.5 to 54.0cm and the dimensions of seat should be 49.5cm(W) x 51.8 cm(D) and that of back should be 45.0cm(W) x 57.5cm(D) with Adjustable height.The seat shall be made up of 1 .4 +/- 0.1 cm thick hot pressed plywood uphostered with fabric and moulded polyurethane foam. The back is made up of injection moulded glass filled nylon & upholstered using fabric mesh with high tenacity yarn. The back assembly should have an height adjustable lumbar support pad having adjustment of 5.0+/-0.5cm. Armrest shall be made up of polypropylene and shall have swivel as well as to & fro motion, it shall have moulded PU top and height can be adjusted upto 6.0 +/- 0.1 cm. The mechanism of the chair shall have following features : 360⁰ revolving type, Centre Tilt Syncro, 4 position locking. The chair shall be provided chrome plated pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3 cm. The pedestal shall be made of injection moulded nylon. it shall be fitted with 5 nos twin wheel castor. The size of the pedestal shall be 66.0 +/- 0.5 cm pitch-centre-dia (76.0 +/- 1.0 cm with castors). The twin wheel castors shall be injection moulded in black plymer. Over all The item should be as per the Manufacturers Standard specifications ( from attached List of Make ).
122	Mid Back Chair w/o head rest ( For Conference room, Visitors and staffs):Supplying and placing in position Overall size of chair Width of Chair 76+- cm, Depth of Chair 76+- cm as measured from pedestal below. Height of back from ground 95.5 to 105.5cm. Seat height 43.5 to 54.0cm and the dimensions of seat should be 49.5cm(W) x 51.8 cm(D) and that of back should be 45.0cm(W) x 57.5cm(D). The seat shall be made up of 1 .4 +/- 0.1 cm thick hot pressed plywood uphostered with fabric and moulded polyurethane foam. The back is made up of injection moulded glass filled nylon & upholstered using fabric mesh with high tenacity yarn. The back assembly should have an height adjustable lumbar support pad having adjustment of 5.0+/-0.5cm. . Height Adjustable Armrest shall be made up of polypropylene and shall have swivel as well as to & fro motion, it shall have moulded PU top and height can be adjusted upto 6.0 +/- 0.1 cm. The mechanism of the chair shall have following features : 360⁰ revolving type, Centre Tilt Syncro, 4 position locking. The chair shall be provided chrme plated pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3 cm. The pedestal shall be made of injection moulded nylon. it shall be fitted with 5 nos twin wheel castor. The size of the pedestal shall be 66.0 +/- 0.5 cm pitch-centre-dia (76.0 +/- 1.0 cm with castors). The twin wheel castors shall be injection moulded in black plymer. . Dimensions tolerance / variations shall be within +/- 1 cm. The Over all item should be as per the Manufacturers Standard specifications ( from attached List of Make ).
123	(Low height Storage Unit): ECHO HDU -Size 1219X900X450mm, Construction is a knockdown construction of 25mm thk and 18mm thk Pre-Laminated boards with metal cladding of 0.8mm thk C.R.C.A (as per IS:513) from outside. Side metal cladding is coated with Epoxy polyster powder of 50±10 microns thickness.In case of 2.5feet Height Storage units, wooden top is provided which is made of 25mm thick Pre-laminated board whereas 4.0feet and 4.5feet height Storage units are provided with 11mm thick bent metal tops made of 0.8mm thk C.R.C.A (as per IS:513). The metal tops are coated with Epoxy polyester powder of 50± 10 microns thickness.The doors are made of 18mm thk Pre-laminated boards with decorative laminate on one side and backing laminate on the other side and complete in all respect. Over all The item should be as per the ManufacturersStandard specifications ( from attached List of Make ) ..
124	Straight Type Modular workstation Recta:Providing and placing of panel & tile based modular workstations of size 1200 mm(W) x 600mm(D) x 1200mm(H) which are GRIHA compliant and as per BIFMA standards, with partition thickness of 50 mm thick including powder coated aluminium trims and supported on Legs for better air circulation and helps in keeping floor clean. The product should be complete and as per apprroved sample and as per the direction of Engineer-In-charge. Panels Construction - Each panel consists of Vertical extrusions 2Nos and Horizontal extrusions made of 1.2mm thick aluminium with duly powder coated at every division of tile/block. Each panel have Bottom frame fabricated for 50 mm panel comprises of L-channels made of 2mm thick CRCA steel (IS: 513), formed plates of 3mm thick HR steel (IS: 2062) & ERW steel tube of size 35x15x1.6mm thick in oval cross section (IS: 7138) welded together.Each Panel consists of 2Nos Intermediate blocks. In a 50 mm Thick panel intermediate block shall comprise of 38mm thick paper honeycomb with 3mm MDF on each sides and 0.6mm decorative laminate on both sides.
125	Aluminium Trims : The top trims and end trims for 50 mm shall be made from aluminum extrusion. All kinds of extrusions for 50 mm shall have average wall thickness of 1.2 mm & having finish of powder coating. Wire Management - Wires runs through the system from Bottom tile and extended to the top at various locations by the help of 2 nos. vertical Cable Ducts in each panels. Cable duct shall be made from 0.8 mm thick M.S. CRCA Grade D as per IS: 513 - 1994. It is constructed with two parts, one is body & another is cover. Worksurface :Worktop of Size : 1200mm(L) X 600mm(D). Worktop shall be made out of 25mm thick prelam particle board. All the open edges of work surface shall be provided with machine pressed 2 mm thick PVC lipping glued with hot melt EVA glue.Mobile Pedestal : Mobile Drawer Unit having 3 Drawers Unit having flat metal front and top with Central locking. The Drawer Unit consistes of 2Box and 1File Drawers. The Overall size of the Drawer Units is 450mm(W) X 435mm(D) X 646mm(H). Construction & Material of Drawer Unit : Welded Assembled of 0.8 thick CRCA for Body Shell, Drawer Front & tray, Front Side Stiffener, Rear Side Stiffener & Bottom, 1.2 thk CRCA Top Stiffener & Bottom stiffener. Drawer Fronts & Metal Front Straight Edge. with Key Board Pullout Tray and CPU Trolley.
126	Talk Conference Table :Supplying and placing in position Conference table of the following specifications. 6 Seater Boat Convex size shall be 2100 Width mm x 1200 Depth mm x 750 Height mm . Top shall be 32 mm thick base material shall be 18 plus 12 mm MDF board 0.4 mm PVC membrane foil using wrap around technology . The foil is pre- coated with PU layer for better scratch and wear resistant plus 0.6 mm balancing laminate on bottom surface . The veil and cross member shall be 18 mm thick base material shall be 16 mm plain particle board post laminated with 0.6 mm top laminate on either side plus 2 mm thick and 0.8 mm thick PVC edge banding . The legs shall be made from 1.6 mm matt silver anodized aluminium extrusion .Legs assembeled together with a plastic glide holder at bottom and 5 mm thick MS powder coated sheet at top . Also there shall be accessflap and switch mounting tray made from matt anodized aluminium extrusion . The company should ISO 9001, ISO 18001, ISO 14001, BIFMA, Greenguard-UL and AIOTA Certified.
127	L-Type Modular workstation Penta:Providing and placing of panel & tile based modular workstations of size 1500 mm W1 x 1500W2 x 600mm(D) x 1200mm(H) which are GRIHA compliant and as per BIFMA standards, with partition thickness of 50 mm thick including powder coated aluminium trims and supported on Legs for better air circulation and helps in keeping floor clean. The product should be complete and as per apprroved sample and as per the direction of Engineer-In-charge. Panels Construction - Each panel consists of Vertical extrusions 2Nos and Horizontal extrusions made of 1.2mm thick aluminium with duly powder coated at every division of tile/block. Each panel have Bottom frame fabricated for 50 mm panel comprises of L-channels made of 2mm thick CRCA steel (IS: 513), formed plates of 3mm thick HR steel (IS: 2062) & ERW steel tube of size 35x15x1.6mm thick in oval cross section (IS: 7138) welded together.Each Panel consists of 2Nos Intermediate blocks. In a 50 mm Thick panel intermediate block shall comprise of 38mm thick paper honeycomb with 3mm MDF on each sides and 0.6mm decorative laminate on both sides. Aluminium Trims : The top trims and end trims for 50 mm shall be made from aluminum extrusion.
128	All kinds of extrusions for 50 mm shall have average wall thickness of 1.2 mm & having finish of powder coating. Wire Management - Wires runs through the system from Bottom tile and extended to the top at various locations by the help of 2 nos. vertical Cable Ducts in each panels. Cable duct shall be made from 0.8 mm thick M.S. CRCA Grade D as per IS: 513 - 1994. It is constructed with two parts, one is body & another is cover. Worksurface :Worktop of Size : 1200mm(L) X 600mm(D). Worktop shall be made out of 25mm thick prelam particle board. All the open edges of work surface shall be provided with machine pressed 2 mm thick PVC lipping glued with hot melt EVA glue.Mobile Pedestal : Mobile Drawer Unit having 3 Drawers Unit having flat metal front and top with Central locking. The Drawer Unit consistes of 2Box and 1File Drawers. The Overall size of the Drawer Units is 450mm(W) X 435mm(D) X 646mm(H). Construction & Material of Drawer Unit : Welded Assembled of 0.8 thick CRCA for Body Shell, Drawer Front & tray, Front Side Stiffener, Rear Side Stiffener & Bottom, 1.2 thk CRCA Top Stiffener & Bottom stiffener. Drawer Fronts & Metal Front Straight Edge. with Key Board Pullout Tray and CPU Trolley.
129	Sub - Head IV :- ELECTRICAL WORK
130	Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable Gl box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (Group C)
131	Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required.
132	Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.
133	Supplying and fixing following size/ modules, Gl box alongwith modular base & cover plate for modular switches in recess etc. as required.
134	1 or 2 Module ( 75 mm x 75 mm )
135	8 Module ( 125 mm x 125 mm )
136	Supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
137	5 / 6 amps switch
138	3 pin 5/6 amp socket outlet
139	TV antenna socket outlet
140	Internet I/O socket outlet RJ-45
141	Supplying and fixing call bell / buzzer suitable for single phase, 230 V, complete as required.
142	Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A 240 volts “C” curve DP MCB complete with connections, testing and commissioning etc. as required.
143	Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
144	2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
145	2 X 6 sq. mm + 1 X 6 sq. mm earth wire
146	4 X 2.5 sq. mm + 2 X 2.5 sq. mm earth wire
147	4 X 6 sq. mm + 2 X 6 sq. mm earth wire
148	4X 16 sq. mm + 2 X 16 sq. mm earth wire
149	Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. 1 run of cable
150	Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface / recessed steel / PVC conduit as required.
151	Supplying and fixing of 25 mm of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
152	Supplying, installation, testing and commissioning of Passive Infrared (PIR) technology based occupancy sensor having high performance, non regulating programmable type, suitable for connected load upto 10 amp, for mounting height upto 2.8 mtr and for 5 m diametre coverage area along with necessary fixing arrangements i/c programming at site etc. complete as required.
153	Supply of 2'x2' Recessed Mounted LED flat panel 34 W or Above 220 V, 50 Hz LED 6500K, Cool day Light Fitting complete with all required drivers other related accessories on false ceiling etc. complete in all respect.
154	Installation, testing and commissioning of pre-wired, fluorescent fitting /compact fluorescent/LED Panel fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
155	Supply of Recessed Round LED 12W or above , 6500K, Cool day Light with all required drivers other related accessories on false ceiling etc. complete in all respect.
156	Supply of LED Spotlight COB light 3 watt or above Warm white Down light (Round) 240 V, 50 Hz with all required drivers other related accessories on false ceiling etc. complete in all respect.
157	Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required.
158	Supplying, Installation, testing and commissioning of of 18 Watt or above LED Batten ( Cool Day Light ) 6500 K 240 V, 50 Hz, Fitting etc. complete in all respect.
159	Supply, Installation, Testing & Commissioning of Profile light/Cove LED Strip Light warm white with driver complete etc. as required.
160	Supplying, Installation, Testing and commissioning of Picture Light 7 W or above with all required drivers other related accessories on wall etc. complete in all respect.
161	Wiring for group controlled (looped) light point/fan point/call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/recessed PVC conduit, and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. ( Group C)
162	Supplying and fixing 3 Pin, 5 A Ceiling rose on the existing junction box / wooden block including connections etc as required.
163	Supplying, installation, testing & commissioning of High Flo Wall Mounting Fan (white) with regulator of 400 mm sweep, 230V, 50 Hz AC with Pull cord control for speed and oscilation on wall / wood with the help of rawl plug and screws including connections etc complete in all respect.
164	Supply of exhaust fan of 300 mm sweep with louvers, 900/1400 rpm, single phase complete with all accessories including their connections & testing etc complete in all respect.
165	Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Upto 450 mm sweep
166	SITC of ABS PLASTIC Automatic Hand Dryer (White) 1 Phase, 1800 W, 200 - 240 V , 50 Hz, Dry Hand Time : 15-20 Seconds etc complete as required.
167	Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
168	Single pole
169	Single pole and neutral
170	Supplying and fixing 8 way (4 + 24), Double door way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
171	Supplying and fixing 6 way, Double door, single pole and neutral, sheet steel, MCB distribution board, 240 V on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required.
172	Supplying and fixing TPN sheet steel enclosure on surface/ recess along with 63 A 415 volts “C” curve TPN MCB complete with connections, testing and commissioning etc. as required.
173	Supplying and fixing of 63 A rating, 415 V, TPN MCB suitable for inductive load in the existing MCB DB complete with connections, testing and commissioning etc. as required.
174	Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, after removing existing MCCB,etc. as required.
175	100 A,16KA,TPMCCB
176	100 A,30KA,FPMCCB
177	200 A,36KA,FPMCCB
178	Supply and connecting of 3 x 16 Sq.mm of FRLS PVC insulated copper conductor, single core cable in the existing DB Panel with lugs etc complete as required (Bus Bar to R.Y.B MCB)
179	Supply of 4 core x 35 sq mm Aluminium armoured XLPE/ PVC insulated and PVC Sheathed cable of 1.1 KV grade.
180	Laying and fixing of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of Upto 35 sq.mm ( clamped with 1mm thick saddle) on wall surface as required.
181	Supplying and making end termination with brass compression gland and aluminium lugs for 4 X 35 sq. mm (32mm) of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required
182	Earthing with G.l. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2. 7 metre long etc. with charcoal/ coke and salt as required.
183	Providing and fixing 25 mm X 5 mm G.l. strip in 40 mm dia G.l. pipe from earth electrode including connection with G.l. nut, bolt, spring,washer excavation and re-filling etc. as required.
184	Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required
185	Providing and fixing 6 SWG dia G. I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.
186	Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.
187	Supply, Installation, testing and commissioning of 80 L water cooler, 40/80, Single Phase, 230 V, 50 Hz, Food Grade Stainless Steel, Soft Aesthetic Design, Longer Cooling Retention, Upto 40% Energy Efficient Compressor, Eco-friendly Refrigerant,Tropicalized Machines, Anti-corrosive Pre-coated Body etc. Including connections, complete as required.
188	Supply, Installation, testing and commissioning of following size Android LED Smart TV of resolution (3840 x 2160) or above with 2 USB Port or above, 2 HDMI Port or above, Wifi , Ethernet including Heavy Duty Wall Mount Bracket / Stand, connections etc complete as required.
189	43 Inches Android LED Smart TV
190	55 Inches Android LED Smart TV
191	Supplying, installation, testing & commissioning of smoke detector Each with builtin LED and mounting base complete with all connections etc. as required.
192	Supplying, installation, testing & commissioning response indicator Each on surface/recess MS box having two LEDs metallic cover completewith all connections etc. as required.
193	Supplying, installation, testing & commissioning of manual call box Each of ABS type in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required
194	Supplying, installation, testing & commissioning fire alarm sounder Each with facility to make announcement, mounted in M.S. box (16 SWG) with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required.
195	Supply & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.
196	Disconnecting, Dismantling & Reinstallation of existing , smoke/ heat detector, manual call box, Response indicator, Talk Back Unit and hooter, including wiring etc.on ceiling/wall complete as required.
197	Disconnecting & dismantling of existing fluorescent fitting, PL fittings, Modular type boards, Piano type socket boards, DP MCB box, LAN, Telephone socket,Industrial box, DB's, Ceiling fans, Wall fans, Exhaust fans,Window AC Package Type Air Conditioners etc. including wiring etc. complete as required.
198	SUB-HEAD: III : EXPANSION OF EPABX SYSTEM
199	Expansion of existing NEC SV-9100 EPABX system for extra for 16 Analogue Extension Lines and 08 Trunk Lines, including SITC of following items in existing EPABX system.16 x 1 Analogue Extension Lines Cards.08 x 1 Analogue Trunk Card.License for all new Lines.
200	Supply, Installation, Testing and Commissioning of feature phone Singtel SL-910 Phones with CLI and flexible Keys.
201	Supply, Installation, Testing and Commissioning of ALCATEL Make T-76, feature Phone
202	Supply and laying of Delton make 0.5mm,20 Pair PJIF Cable.
203	Supply,Installation,Testing and Commissioning 100 Pair MDF Box with 05 Nos. KRONE Modules
204	Supply, Installation, Testing and Commissioning of of Wall mount 9U Rack with 400mm depth, front glass door & lock arrangement with suitable size of Fan and ACD Power socket. Complete as required.
205	SUB-HEAD: IV : AIR CONDITIONING SYSTEM
206	Supply, Installation, Testing and Commissioning of Air Cooled Cassette type Air conditioners complete with Indoor unit (IDU) (100% Copper Coil), Out door unit (ODU)(100% Copper Coil), R-32/R410A/R-407 Green Refrigerant, wireless Remote, inbuilt drain pump,suitable for 230V, 50 Hz ,1 phase AC supply, including surface /concealed copper Refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 5.5 Mtr (IDU to ODU), copper power and control cable upto 5.5 Mtr (IDU to ODU) including drain pipe and MS angle Frame/ Stand for ODU, the system shall be capable of performing cooling, dehumidification, Air circulation, filtration & ventilation of following capacity with Scroll/rotary compressor with min 5 year OEM warranty both compressor and PCB as specified. The system shall be able to deliver 100% of the rated capacity as per relevant IS Code. The lab testing reports as per IS: 1391 shall be submitted from NABL accredited as per IEC 17025 standards / Central Power Research Institute (CPRI)/Electrical Research and Development Association (ERDA)with Original Equipment Manufacturer (OEM) etc. complete as per CPWD specification and as per IS: 1391 as required.
207	Inverter Type - Cooling only 1.5 TR with 5 Star BEE Rating
208	Inverter Type - Cooling only 2.0 TR with 5 Star BEE Rating
209	Supply and fixing of 25 mm dia PVC hard drain pipe for above said cassette type air-conditioner units etc. complete as required.
210	Supplying and fixing of suitable size additional copper refrigerant pipe up to 2.0 TR cassette type air-conditioner unit with proper insulation including control wiring, power cable for interconnection of outdoor unit and indoor unit and drain pipe with insulation, accessories etc complete as required.
211	Supplying and drawing of followinng sizes FRLS PVC insulated copper conductor, Single core cable in the existing surface/ recessed steel/ PVC conduit as required.
212	3 x 1.5 sq. mm
213	3 x 2.5 sq. mm
214	3 x 4 sq. mm
215	Supply, Installation, Testing and Commissioning of Window type Air conditioners (100% copper coil) complete with copper power cable upto 3 Mtr, wireless Remote, suitable for working between 180- 260V with low & high voltage cut-oﬀ and 50 hz ,1 phase AC supply capable of performing, cooling, dehumidiﬁcation, air circulation, R-32/R-410A /R-407B Green Refrigerant with Scroll / rotary compressor with min 5 year Original Equipment Manufacturer (OEM) warranty both compressor and Printed Circuit Board (PCB), antifreeze thermostat on the coil as a safety feature, complete with ﬁxing including T&P & labour etc as required complete in all respect as speciﬁed of following capacity. Sound level of up to 50dB inside the room is acceptable. The unit shall be in conﬁrmation with IS 1391 Part-I 2023 and CPWD Speciﬁcation. The system shall be able to deliver 100% of the rated capacity upto 42 Degree Celsius. The system shall be able to operate up to 50 °C (out door ambient temperature).
216	Inverter Type 1.5 TR with Inverter 5 Star BEE rating
217	Supplying, installation, testing and commissioning of 2 TR, Inverter Type, Star Rating : 3 or above, Cord less remote control Window Type Air-Conditioning unit, cooling capacity comprising an unit consisting of sealed rotary compressor, eco-friendly refrigerant gas charging, air cooled condenser (100% copper coil), condenser fan, expansion device etc. and unit consisting of centrifugal fan, blower, fan motor, out door casing, filter, control, etc. as per manufacturer's technical specifications and suitable for single phase, 230 Volts, 50 Hz power supply including repair & alternation of windows, making good etc complete as required.
218	Supply , Installation, Testing and Commissioning of Air Cooled Hi Wall split type Air conditioners complete with Indoor unit(IDU) ( 100% Copper Coil), Out door unit (ODU)( 100% Copper Coil), surface / concealed copper Refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 3 Mtr (IDU to ODU), copper power cable upto 3.5 Mtr (IDU to ODU) i/c drain pipe and MS angle Frame/ Stand for ODU R-32/R-410/ R-407 Green Refrigerant, wireless Remote control, suitable for working between 180-260V with low & high voltage cutoﬀ and 50 hz ,1 phase AC supply capable of performing cooling, dehumidiﬁcation, air circulation of following capacity with Scroll /rotarycompressor. The system shall be able to deliver 100% of the rated capacity upto 42 Degree Celsius. Min 5 year Original Equipment Manufacturer (OEM) warranty both compressor and Printed Circuit Board (PCB). Must comply : Electrical cable IS 694 or IS 9968 temperature sensing control IS /International Electro technical Commission (IEC) 60730, hermetic compressor IS 10617, heat exchanger IS 11329, capacitor IS 2993 and motor IS 12615. Complete as per CPWD speciﬁcation and IS : 1391 Part II 2023. The system shall be able to operate up to 50 °C (out door ambient temperature).
219	Inverter Type - Cooling only 1.0 TR with 5 Star BEE Rating
220	Supplying and fixing of suitable size copper refrigerant pipe 1 TR split type air-conditioning unit with proper insulation, shaddling, supports etc. complete as required.
221	SUB-HEAD: V : Buy Back items
222	Salvage value of Dismantled Packaged Air conditioner 1.5 TR , \\"As is where is basis\\".
223	Salvage value of Dismantled Window AC 1.5 TR \\"As is where is basis\\".
224	Salvage value of Dismantled DP PVC/Steel enclosure box 32 A \\"As is where is basis\\".
225	Salvage value of Dismantled Industrial type SP MCB Box \\"As is where is basis\\".
226	Salvage value of Dismantled Exhaust Fan 300mm Sweep \\"As is where is basis\\".
227	Salvage value of Dismantled Ceiling Fan \\"As is where is basis\\".
228	Salvage value of Dismantled Wall Mount fan 400mm Sweep \\"As is where is basis\\"
229	Salvage value of Dismantled Piano Switch Board 2 Pin Socket \\"As is where is basis\\".
230	Salvage value of Dismantled Piano Switch Board ( 2no. Socket + 1no. Switch) 20A \\"As is where is basis\\".
231	Salvage value of Dismantled Piano Switch Board ( 1no. Socket + 1no. Switch) 20A \\"As is where is basis\\".
232	Salvage value of Dismantled Piano Switch Board ( 3 no. Switch 5/6A + 1 Fan Regulator) \\"As is where is basis\\".
233	Salvage value of Dismantled Piano Switch Board ( 1 no. Switch+ 1no. Socket) 5/6 A \\"As is where is basis\\".
234	Salvage value of Dismantled Piano Switch Board (19 no. Switch) 5/6A \\"As is where is basis\\".
235	Salvage value of Dismantled Piano Switch Board ( 4 no. Socket + 4 no. Switch ) 20 A & 5/6A \\"As is where is basis\\".
236	Salvage value of Dismantled Piano Type Switch Board ( 8no. Switch 5/6A) \\"As is where is basis\\".
237	Salvage value of Dismantled \\"As is where is basis\\". Piano Type Switch Board ( 6no. Switch 5/6A)
238	Salvage value of Dismantled Piano Switch Board (5 no. Switch) 5/6A \\"As is where is basis\\".
239	Salvage value of Dismantled Piano Switch Board ( 4no. Switch) 5/6A \\"As is where is basis\\".
240	Salvage value of Dismantled Piano Switch Board ( 2no. Switch) 5/6A \\"As is where is basis\\".
241	Salvage value of Dismantled 1200mm Tubelight on Celing/ Hanging \\"As is where is basis\\".
242	Salvage value of Dismantled Rj 45 Point + Gang Box \\"As is where is basis\\".
243	Salvage value of Dismantled 3 Modular Board (1No. SP 32 A+ 1 no. Socket 16 A) \\"As is where is basis\\".
244	Salvage value of Dismantled 2'x2' Fluroscent Plug-in Panel Light \\"As is where is basis\\".
245	Salvage value of Dismantled 12 Way MCB DB (1 no. SPN 32 A + 10no. SP ) \\"As is where is basis\\".
246	Salvage value of Dismantled Single Pole 5/32 A \\"As is where is basis\\".
247	Salvage value of Dismantled Single Pole with Neutral 5/32 A MCB \\"As is where is basis\\". Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents
5	Click here to download tender document	Tender Documents

Also Visit

Tenders

Delhi Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Renovation Of Rab At 2Nd Floor Of Main Building Csir Complex Pusa New Delhi., Delhi-Delhi

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Renovation Of Rab At 2Nd Floor Of Main Building Csir Complex Pusa New Delhi., Delhi-Delhi

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us