|
| 1 | Earthwork in bulk excavation (exceeding 30cm in depth, 1.5m in width as well as 10 Sqm. on plan) including disposal of excavated soil lead upto 50m, disposed soil to be levelled and neatly dressed etc., complete complying with AISS and as directed by the departmental officers. |
| 2 | Providing and laying Plain Cement Concrete 1:4:8 (One part of cement, 4 parts of M. Sand (Crushed Stone Sand) & 8 Parts of 40 mm nominal size metal ) for foundation using 40 mm nominal size graded metal including mixing, laying, levelling, consolidation, finishing and curing etc., complete complying with AISS and as directed by the departmental officers. |
| 3 | Providing Form work including centring, shuttering, (shuttering Planks shall not less than 38 mm thick) so as to give a rough finish shuttering and propping etc., in all floors upto full height of the building and removal of the same for in situ RCC work such as beam, slabs, lintels, sunshade etc., complete complying with AISS and as directed by the departmental officers. |
| 4 | Providing and laying Reinforced Cement Concrete 1:1.5:3 (One part of cement, One and a half parts of M. Sand (Crushed Stone Sand) & Three Parts of graded stone aggregate (i.e.) 2 parts of 20mm nominal size graded metal & 1 part of 10mm nominal size graded metal) using 20 mm nominal size graded metal including mixing, laying, levelling, consolidation, finishing and curing etc., and excluding the cost of form work and reinforcement grills for all RCC works in all floors upto full height of the building etc., complete complying with AISS and as directed by the departmental officers. |
| 5 | Fabricating and placing in position of M.S / Tor steel grills for R.C.C works in all floors including cost of Steel, cutting, bending, binding with 16 Gauge GI Binding wire and placing in position etc., complete complying with AISS and as directed by the departmental officers. |
| 6 | Filling basement with available excavated earth in trenches, plinth, sides of foundation etc., in layers not exceeding 20cm in depth, consolidating and watering etc., complete complying with AISS and as directed by the departmental officers. |
| 7 | Brick work in Cement Mortar 1:5 (M. Sand (Crushed Stone Sand)) ( One cement, five M. Sand (Crushed Stone Sand)) using chamber burnt bricks for walls in Ground Floor of the building including cost of all materials, labour, curing etc., complete complying with AISS and as directed by the departmental officers. |
| 8 | Providing Half Brick Masonry wall using chamber burnt bricks in Cement Mortar 1:3 (M. Sand (Crushed Stone Sand)) (One cement, three M. Sand (Crushed Stone Sand)) for partition walls etc., in Ground level including cost of all materials, labour, scaffolding, etc., complete complying with AISS and as directed by the departmental officers. |
| 9 | Plastering the Brick work 15 mm thick in Cement Mortar 1:5 (Plastering Sand (P-Sand)) (One cement, five Plastering Sand (P-Sand)) for all faces of walls (even and uneven) in all floors upto full height of the building including necessary scaffolding, racking of masonry joints, cleaning, curing etc., complete complying with AISS and as directed by the departmental officers. |
| 10 | Repairs to plaster in patches of 10 to 15 mm thick including cutting the patch in proper shape and disposal of rubbish in Cement Mortar 1:5 including all labour, tools, equipments etc., complete complying with AISS and as directed by the departmental officers. |
| 11 | Supplying and fixing UPVC ( Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm X 58mm and shutter profile size of 60 X 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work. The rate including cost of all materials, labour, tools & plants, conveyance, fixing in position etc., complete and as directed by the departmental officers. |
| 12 | Supplying and fixing UPVC WINDOWS( Un-Plasticized Polyvinyl Chloride) windows of casement type (open) from the profile the size of outer frame 60mm X 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles aremulti chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with overall the edges of frame and shutter. The shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work. The rate including cost of all materials, labour, tools & plants, conveyance, fixing in position etc., complete and as directed by the departmental officers. |
| 13 | Supplying and fixing in position wooden window of various size in all floor with kongu wooden panelled shutters including cost of hold fasts and applying one coat of wood primer of approved quality and including cost and fixing of first quality ISI standard furniture fittings with screws / bolt & nut, the rate shall include cost of wood, labour for wrought and putup, furniture fittings, primer etc., complete complying with AISS and as directed by the departmental officers. |
| 14 | Supplying and fixing in position of Wooden panelled door single shutter including cost of hold fasts and applying one coat of wood primer of approved quality, fixing of first quality ISI standard furniture fittings with screws / bolt & nuts, the rate shall include cost of wood, labour for wrought and put up, etc., complete complying with AISS and as directed by the departmental officers. |
| 15 | Supplying the structural steel, MS Flats, Square Rods, Angles, Channels etc., for vertical members / bracing /stiffeners / Base plates or for any other usage as a structural member, fabricating, welding and erecting the frame work in position at the locations shown in the drawing including all labour, materials, conveyance, tools & plants, etc., complete and as directed by the departmental officers (Note : 1. While fabricating, necessary holes and bolt & nut shall be provided at no extra cost in the structural members. 2. In case, the specified MS section is not available in the market, the nearest alternative section may be used after approval of the Engineer). |
| 16 | Providing and fixing concertina coil fencing with punched tape concertina coil 600mm dia 10 metre openable length (total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron U shaped placed 2.4m or 3.00m apart and with 9 horizontal R.B.T reinforced barbed wire, stud tied with G.I. staples and G.I clibs to retain horizontal, including necessary bolts or G.I barbed wire tied to angle iron, all complete as per direction of Engineer-in- charge, with reinforced barbed tape (R.B.T) / Spring core (2.5mm thick) wire of high tensile strength of 165 Kg / Sq.mm with tape (0.52 mm thick) and weight 43.478 gm / metre (cost of M.S angle, C.C blocks shall be paid separately etc.,) complete and as directed by the departmental officers. |
| 17 | Providing and laying terrace lime concrete weathering course with grade brick aggregate 25 mm nominal size and 50% mortar comprising of 1 lime putty and 2 surkhi and curing including all materials, labour, etc., complete complying with AISS and as directed by the departmental officers. |
| 18 | Finishing the top of weathering course with one course of machine pressed tiles of size 23 cm X 23 cm X 2cm in Cement Mortar 1:3 (M. Sand (Crushed Stone Sand)) including all materials, labour, etc., complete complying with AISS and as directed by the departmental officers. |
| 19 | Supplying and fixing Solid Panel PVC door with frame - Supplying and fixing Solid PVC Door Shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC Sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter etc., complete and as directed by the departmental officers. |
| 20 | Providing and fixing Precoated metal sheet 0.45mm for Roofing with hot dipped galvanised prepainted steel sheet for roof of make TATA or equivalent including cost of metal sheet, conveyance, fixing the sheet with necessary clamps / screws and labour charges for fixing sheet etc., complete complying with AISS and as directed by the departmental officers. |
| 21 | Providing, Supplying and Laying factory made Chamfered edge Cement Concrete 60mm thick Paver block of M-35 grade with approved colour, design & pattern of required strength, thickness & size / shape, made by table vibratory method using PU mould, laid in required colour & patten over 50mm thick compacted bed of sand, compacting and proper embedding / laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver block to the required size and pattern, finishing and sweeping extra sand etc., including all materials, labour, tools & plants, conveyance etc., complete and as directed by the departmental officers. |
| 22 | Providing and fixing of glazed Aluminium Partition with Aluminium frame section (manufactured to relevant IS Specification) for vertical and bottom of size 65 X 38 X 2 mm, horizontal section of size 100 X 45 X 2 mm including providing 5.5 mm thick glasssuperior quality at middle portion and Novapan of 8 mm thick at top and bottom with necessary accessories like snap on beading (clips), cleat angles, fully threaded 75mm long metal screws, wooden plugs & metal screws etc., including drilling holes in theconcrete / brick masonry etc., wherever required, all as directed at site of work including all materials, labour, tools, equipments, scaffolding, transport, fuel, etc., complete. Note: Aluminium sections shall be smooth, rust free, straight, mitered andjointed mechanically wherever required including using glazing clip, rubber beading for glazing and necessary screws, plugs etc., complete and as directed by the departmental officers. |
| 23 | Providing and fixing of Anodized Aluminium Window / Ventilator of various size (manufactured to relevant IS Specification) of 37.5 x 37.5mm Vertical and Window bottom rails using 67.5 x 37.5mm including providing 5.5 mm thick glass superior quality for panel with necessary accessories like snap on beading (clips), cleat angles, fully threaded 75mm long metal screws, wooden plugs & metal screws etc., wherever required, all as directed at site of work including all materials, labour, tools, equipments, scaffolding, transport, fuel, etc., complete. Note: Aluminium sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including using glazing clip, rubber beading for glazing and necessary screws, plugs etc., complete and as directed by the departmental officers. |
| 24 | Attending the repairs works in the existing door, window and ventilator with frame and shutters of various size at Residential Quarters using the available wooden planks / scantlings which will be issued by the department and same may be re-fixed at the original position. The cost inclusive of removing and re-fixing the existing door/window/ventilator with required fixtures, labour, tools & plants etc., complete and as directed by the departmental officers. |
| 25 | Providing and laying approved colour and quality of Stain Free Nano Polish Vitrified Tiles 600 x 600 x 8mm in Cement Mortar 1:4 (M. Sand (Crushed Stone Sand)), 20 mm thick. The rate inclusive of cost of tiles, all materials, labour, white cement, conveyance etc., complete complying with AISS and as directed by the departmental officers. |
| 26 | Providing and laying approved colour and quality of Ceramic floor tiles 30 x 30 cm in Cement Mortar 1:4 (M. Sand (Crushed Stone Sand)), 12 mm thick. The rate inclusive of cost of tiles, all materials, labour, white cement, conveyance etc., complete complying with AISS and as directed by the departmental officers. |
| 27 | Providing and fixing in Cement Mortar 1:3 (M. Sand (Crushed Stone Sand)), 6 mm thick of 30 x 30 cm wall tiles over the existing wall up to 2.50 m height by chipping the wall surfaces wherever required and fixing with approved colour and quality of tilesincluding all materials, labour, equipments etc., complete complying with AISS and as directed by the departmental officers. |
| 28 | Supplying and laying in trenches 25 mm dia. PVC inflow pipe line 10 Kg./CM2 with necessary pipe specials such as elbow, tee, union joint etc., and the joints being tightened including threading cost of pipe, specials etc., complete complying with AISS and as directed by the departmental officers. |
| 29 | Supplying and fixing in position of best Indian make heavy duty Gun Metal Gate Valve at 25mm dia. of approved quality including all materials, labour etc., complete complying with AISS and as directed by the departmental officers. |
| 30 | Supplying and laying in trenches 50 mm dia. PVC inflow pipe line 10 Kg./CM2 with necessary pipe specials such as elbow, tee, union joint etc., and the joints being tightened including threading cost of pipe, specials etc., complete complying with AISS and as directed by the departmental officers. |
| 31 | Supplying and fixing in position of best Indian make heavy duty Gun Metal Gate Valve at 50mm dia. of approved quality including all materials, labour etc., complete complying with AISS and as directed by the departmental officers. |
| 32 | Supplying and fixing in position 15mm dia. SS Long lever water tap of approved quality including all materials, labour, fixing charges, etc., complete and as directed by the departmental officers. |
| 33 | Supplying and fixing of 1000 litres capacity Sintex double layer water tank with approved brand including cost of PVC water tank, making connection with input and output water pipe line and valves. Cost inclusive of all materials, labour charges, & conveyance etc., complete and as directed by the departmental officers. |
| 34 | Supplying and laying in trenches 110 mm dia. PVC inflow pipe line 6 Kg./CM2 with necessary pipe specials such as elbow, tee, union joint etc., and the joints being tightened including threading cost of pipe, specials etc., complete complying with AISS and as directed by the departmental officers. |
| 35 | Supplying and fixing in position of best Indian make chinnaware water closet of European type (White) of double trap syphonic with fibre cover including all fittings and necessary lead pipe jointing the trap with C.I. pipe, the pipe connection being embedded below floor level in brick jelly concrete in lime mortar 1:2 including cost of fittings of low level flushing cistern with syphonic fitting tank of 12.5 litre capacity with inlet and over flow at bottom and connecting it with water supply pipe line and painting the pipe line with two coats of paint approved quality including all materials, labour etc., complete complying with AISS and as directed by the departmental officers. |
| 36 | Supplying and fixing in position of best Indian make chinaware water closet of indian style (white color) of approved quality (make parryware/Hindware) and size 580mmx440mm with foot rests (Oriya type) with necessary 'P' or 'S' trap in brick jelly concrete in lime mortar 1:2 (one lime two sand) and plastering with CM 1:3 (one cement, three sand) finshing roughly to receive floor finish including all materials, labour etc., complete complying with AISS and as directed by departmental officers. |
| 37 | Supplying and fixing of Lipped Mouth Porcelin Flat Urinal (White) of approved quality with all accessories such as 32mm dia bell mouth PVC connection, 15mm dia G.M wheel valve, 15mm ida 'B' class GI waste water pipe, 15mm dia nylon coneection, 15mm dia brass nipple, including all materials, labour etc., complete complying with AISS and as directed by the departmental officers. |
| 38 | Supplying and fixing in position of chinnaware Wash Basin (White color) 550 mm x 400mm size with pedestal of approved quality with necessary fittings such as cast iron bracket, 1 no 15mm C.P heavy duty piller tap with pentagonal head, 32mm dia PVC wastewater pipe and 15mm dia nylon connection, 1 No 15 mm dia G.M. wheel valve and fixing it with the wall with necessary plugs, clamps and screws, and giving water supply connection and painting the exposed pipe connection with two coats of paint of approved colour, including all labour, materials etc., complete complying with AISS and as directed by the departmental officers. |
| 39 | Supplying and fixing in position of kitchen sink (white color) 600 mm x 450x 200mm size (parryware/Hindware) of approved quality with necessary fittings 1 no 32 mm dia GI waste water pipe, 32 mm dia C.P.waste coupling and fixing it with the wall with necessary plugs, clamps and screws, and giving water supply connection and painting the exposed pipe connection with two coats of paint of approved colour including all materials, labour etc., complete complying with AISS and as directed by the departmentalofficers. |
| 40 | Supplying, fabricating, erecting and fixing plain Hilux or equivalent board False Ceiling of 10 mm thickness up to a ceiling height of 4.5m from floor level including cost of Hilux Board Plain Sheets 10mm thick, labour charges, accessories, conveyance and erection etc., complete and as directed by the departmental officers. |
| 41 | Removing the colour wash or white wash by steel wire brushing and scrapping including necessary scaffolding, labour, equipments etc., complete complying with AISS and as directed by the departmental officers. |
| 42 | Painting the steel surfaces with Two coats of Synthetic enamal paint of approved quality (excluding priming coat) on new steel and other metal surfaces with enamel paint, brushing, interior to give an even shade including cleaning the surface of all dirt, dust and other foreign matter including all materials, labour, brushes, etc., complete complying with AISS and as directed by the departmental officers. |
| 43 | Applying Two coats of Synthetic Enamel paint (excluding priming coat) on New wood and wood based surfaces interior to give an even shade including cleaning of all dirt, dust and other foreign matter, sand papering and including cost of Synthetic EnamelPaint and labour charges etc., complete complying with AISS and as directed by the departmental officers. |
| 44 | Applying One coat of Alkali Resistant Primer and Two coats of ACE - Exterior Emulsion Paint of approved colour and quality over the New wall surface in all floors to give an even shade after thoroughly brushing the surface free from mortar droppings andother foreign matter and also including preparing the surface even and sand paperes smooth including all materials, labour, brushes, scaffolding, etc., complete complying with AISS and as directed by the departmental officers. |
| 45 | Applying One coat of Alkali Resistant Primer and Two coats of APEX - Exterior Emulsion Paint of approved colour and quality over the New wall surface in all floors to give an even shade after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand paperes smooth including all materials, labour, brushes, scaffolding, etc., complete complying with AISS and as directed by the departmental officers. |
| 46 | Collection and Supply of good quality Red earth from Vagaikulam and conveying by road with an average lead of 26 KM & stacking at site for pre-measurement including cost of materials, conveyance of red earth, labour, tools & plants etc., complete and asdirected by the departmental officers. |
| 47 | Collection and Supply of good quality Cow dung manure (well dried manure) from Tuticorin town and conveying by road with an average lead of 13 km & stacking at site for pre-measurement including cost of cow dung manure, conveyance, labour, tools & plants, etc., complete and as directed by the departmental officers. |
| 48 | Mixing of Red earth and Cow dung manure for spreading and leveling the plantation area for required thickness including labour, tools & plants, etc., complete and as directed by the departmental officers. |
| 49 | Supply and planting of Golden Duranta Border plant saplings wherever required for gardening including cost of sapling, labour, tools & plants, etc., complete and as directed by the departmental officers. |
| 50 | Supply and planting of ornamental plants for gardening (i.e.) Alamanta, Ficus, Mosantha, Xeroa, Blue Marica, Jet ropa, Cactus, Crotons, Yellow palms, X Mas tree to a minimum height of 2.5 feet including cost of saplings, labour, tools & plants, etc., complete and as directed by the departmental officers. |
| 51 | Supplying and laying of Mexican Carpet grass (Ready made sheet) at site for transplanting in the lawn area. The rate shall include transportation, loading, unloading of grass carpet along with underlying rooting medium without damaging the roots etc., complete and as directed by the including cost of Mexican Carpet grass (Ready made sheet), labour, tools & plants, etc., complete and as directed by the departmental officers. |
| 52 | Deploying earth moving machinery JCB wherever required for the following works viz., Earthwork excavation, filling, levelling the undulated area, cleaning the vegetation along with roots, removal of unwanted debris / juliflora trees, loading into lorry and for any other works required etc., including cost of diesel, oil, operator charges etc., complete and as directed by the departmental officers. |
| 53 | Providing and laying Plain Cement Concrete 1:1.5:3 (One part of cement, One and a half parts of M. Sand (Crushed Stone Sand) & Three Parts of graded stone aggregate (i.e.) 2 parts of 20mm nominal size graded metal & 1 part of 10mm nominal size graded metal) for RCC works using 20 mm nominal size graded metal including mixing, laying, levelling, consolidation, finishing and curing etc., complete complying with AISS and as directed by the departmental officers. |
| 54 | Providing and fixing of Decorative Wall paneling with 19mm thick BWP- Marine Grade Plywood of good quality (confirming to IS 710 category) finished with designed laminations for making the interior walls (plain walls without any paneled base) in a decorative manner including display set boxes, Open boxes, Low / Height Storages, shelves, beadings, etc as per the design and drawing to be approved etc. The rate inclusive cost of all the materials / items required to the work, labours, painting, polishing wherever required, finishing etc., complete complying with BIS and as directed by the departmental officers. |
| 55 | Supplying and fixing Rolling shutters with ISI make of approved size and section using 18 GI sheet with Gear Operated Type (from 8 sqm. to 12 sqm. Area), M.S.laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength and M.S top cover to required thickness for rolling shtters. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc., including cost of all materials, labour charges and minor tools, all handling and transportation charges to work site etc., complete and as directed by the departmental officers. |
| 56 | Supplying and fixing in position of Brass Chromium Plated Towel Rail 60cm long and 20mm dia. with Brackets first quality approved by the department including plugs, screws, all materials, labour etc., complete complying with AISS and as directed by the departmental officers. |
| 57 | Supplying and fixing in position of 600 x 450 mm size Mirror of best make, first quality approved by the department including plywood back, plugs, screws etc., complete complying with AISS and as directed by the departmental officers. |
| 58 | Providing and fixing granite slabs (jet black) of 20mm thick (super fine polished with nosing edges) on the steps area of building, in between urinals and wherever required in Cement Mortar 1:4 (M. Sand (Crushed Stone Sand)). The rate inclusive of cost of granite slab, chemical component, white cement, labour charges & conveyance etc., complete and as directed by the departmental officers. |
| 59 | Dismantling Barbed wire or Flexible wire rope in fencing including making rolls and stacking them within a lead of 100m including all labour, tools, equipments, transport, fuel, etc., complete complying with AISS and as directed by the departmental officers. |
| 60 | Dismantling and removal of Brick Masonry work (BW) in Cement Mortar above G.L. upto floor two level including stacking of serviceable materials and disposal of unserviceable materials within a lead of 100 m including all labour, tools, equipments, transport, fuel, etc., complete complying with AISS and as directed by the departmental officers. |
| 61 | Dismantling and removal of Reinforced Cement Concrete (RCC) above G.L. upto floor two level including stacking of serviceable materials and disposal of unserviceable materials within a lead of 100 m including all labour, tools, equipments, transport, fuel, etc., complete complying with AISS and as directed by the departmental officers. |
| 62 | Cleaning the Community Centre building inside area after each function with watering, brooming, surfing or any other cleaning materials to be used for Hall area, Kitchen, Verandah, Dining hall, cleaning the surrounding area outside & inside toilets, bathrooms and removing the used waste materials like Banana Leaves, Use & Throw materials etc., complete including all materials, tools, labour etc., complete and as directed by the departmental officers. Please Enable Macros to View BoQ information |
