|
| 1 | Civil Work |
| 2 | 15.7.1Demolishing brick work manually / by mechanical means including stacking ofserviceable material and disposal of unserviceable material within 50 metres lead asper direction of Engineer-in-Charge.In mud mortar |
| 3 | 15.13.2Taking out doors, windows and clerestory window shutters (steel or wood ) includingstacking within 50 metres lead:Of area beyond 3 sq. metres |
| 4 | 21.1.1.1Providing and fixing aluminium work for doors, windows, ventilators and partitionswith extruded built up standard tubular sections/ appropriate Z sections and othersections of approved make conforming to IS : 733 and IS: 1285, fixing with dashfasteners of required dia and size, including necessary filling up the gaps at junctions,i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc.Aluminium sections shall be smooth, rust free, straight, mitred and jointedmechanically wherever required including cleat angle, Aluminnium snap beading forglazing /paneling, C.P. brass/ stainless steel screws, all complete as per architecturaldrawings and the directions of Engineer-in-charge.(Glazing, paneling and dashfasteners to be paid for separately):For fixed portionAnodised aluminium (anodised transparent or dyed to required shadeaccording to IS : 1868, Minimum anodic coating of grade AC 15) |
| 5 | 21.1.2.1For shutters of doors, windows & ventilators including providing and fixing hinges /pivots and making provision for fixing of fittings wherever required including thecost of EPDM rubber/ neoprene gasket required (Fittings shall be paid forseparately)Anodised aluminium ( anodised transparent or dyed to required shadeaccording to IS : 1868, Minimum anodic coating of grade AC 15) |
| 6 | 21.3.1Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per thearchitectural drawings and the directions of Engineer - in -Charge. ( Cost ofaluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mmthickness (weight not less than 10kg/sqm) |
| 7 | 21.4.1Providing and fixing double action hydraulic floor spring of approved brand andmanufacture conforming to IS: 6315, having brand logo embossed on the body / platewith double spring mechanism and door weight upto 125 kg, for doors including costof cutting floors, embeding in floors as required and making good the same matchingto the existing floor finishing and cover plates with brass pivot and single piece M.S.sheet outer box with slide plate etc. complete as per the direction of Engineer -inCharge.With stainless steel cover plate minimum 1.25 mm thickness |
| 8 | 10.25.2Item Shifted to Sub head 14 as item 14.73Item Shifted to head 14 as item 14.74Steel work welded in built up sections/framed work, including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer usingstructural steel etc. as required.In gratings, frames, guard bar, ladder, railings,brackets, gates and similar works |
| 9 | 13.1.112 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) |
| 10 | 13.43.1Applying one coat of water thinnable cement primer of approved brand andmanufacture on wall surface:Water thinnable cement primer |
| 11 | 13.98.1Wall painting with plastic emulsion paint of approved brand and manufacture to givean even shade:One or more coats on old work |
| 12 | 13.61.1Painting with synthetic enamel paint of approved brand and manufacture to give aneven shade:Two or more coats on new work |
| 13 | 4.1.8Providing and laying in position cement concrete of specified grade excluding thecost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mmnominal size derived from natural sources) |
| 14 | 4.1.3Providing and laying in position cement concrete of specified grade excluding thecost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarsesand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mmnominal size derived from natural sources) |
| 15 | 17.7.1Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32mm C.P. brass waste of standard pattern, including painting of fittings and brackets,cutting and making good the walls wherever require:White Vitreous China Washbasin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps |
| 16 | 51.19.ST3Supplying and installing ready made PVC Septic tank including the cost of carriage,trenching, placing at the level below ground level as specified as per the direction ofengineer in charge (Provision for CC/RCC/Sand/06mm aggregate for the preparationof bed shall be paid separately) 3. 25 to below 35 flush capacity |
| 17 | 50.18.9.8.2Providing and fixing PVC pipes includings of pipes with one step PVC solventcement, trenching and refilling & testing of joints complete as per direction ofEngineer in Charge. 75 mm dia 4 Kgf/cm2 |
| 18 | 50.18.8.9.1Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes with one step PVC solvent cement andtesting of joints complete as per direction of Engineer-in-Charge. Concealed work,including cutting chased and making good the wall etc. 110 mm pipe 6kgf/cm2 |
| 19 | 5.22.2Steel reinforcement for R.C.C work including straightening, cutting, bending, placingin position and binding all complete upto plinth levelHard drawn steel wire |
| 20 | 4.1.2Providing and laying in position cement concrete of specified grade excluding thecost of centering and shuttering - All work up to plinth level:1:1½:3 (1 Cement: 1½coarse sand (zone-III) derived from natural sources : 3graded stone aggregate 20 mm nominal size derived from natural sources) |
| 21 | 17.2.1Providing and fixing white vitreous china pedestal type water closet (European typeW.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231,with all fittings and fixtures complete, including cutting and making good the wallsand floors wherever required:W.C. pan with ISI marked white solid plastic seat andlid |
| 22 | 17.7.4Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32mm C.P. brass waste of standard pattern, including painting of fittings and brackets,cutting and making good the walls wherever require:White Vitreous China Flat backwash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap |
| 23 | 50.17.1.4Supplying and fixing CP Health faucet good quality including cost of materials andlabour charges etc. complete as per the direction of site engineer-in-charge |
| 24 | 11.20.1Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard,jointed with neat cement slurry mixed with pigment to match the shade of tiles,including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar1:4 ( 1 cement : 4 coarse sand).Light shade pigment using white cement |
| 25 | 10.28Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes,channels, plates etc., including welding, grinding, buffing, polishing and makingcurvature (wherever required) and fitting the same with necessary stainless steel nutsand bolts complete, i/c fixing the railing with necessary accessories & stainless steeldash fasteners, stainless steel bolts etc., of required size on the top of the floor or theside of waist slab with suitable arrangement as per approval of Engineer-in-charge,(for payment purpose only weight of stainless steel members shall be consideredexcluding fixing accessories such as nuts, bolts, fasteners etc.) |
| 26 | Renovation |
| 27 | OD413307/2025-2026Providing and fixing office cup boards of size 1.20m long each 0.40m width 2.14 mheight pre-laminated with decorative lamination on both sides exterior grade-1 MDFboard frame of thickness 18mm, with 3 vertical and 5 horizontal compartmentsincluding necessary handle ,locking arrangements as per the direction of departmentalofficers at site includind all charges of materials and labour charges etc. complete and an attached cupboard for keeping CPU,UPS,keyboard drawyer etc complete |
| 28 | OD413342/2025-2026Providing and fixing office cabin having prelaminated with decorative lamination onboth side exterior Grade-1 MDF board 18mm thick, made of double layer boardverticals,table counter for fixing desktop etc.,one drawyer of 40*40*10cm size at top |
| 29 | OD414237/2025-2026Providing and fixing glazing in table top as per yhe architectural drawings and thedirections of engineer -in-charge. with float glass panes of 12mm thickness |
| 30 | OD414099/2025-2026Providing and fixing office table of size 0.60*1.00*.75 with one computer keyboarddrawer using pre-laminated medium density fibre board IS:14587:1998 Marked,withone side decorative lamination other side balancing lamination Grade -1 ( exteriorgrade) in shelves with screws and fittings wherever required , edges to be sealed withPVC Edge bending tape 2.00mm thick of approved brand (fittings to be paidseparately) |
| 31 | OD414202/2025-2026Providing and fixing office table of 'L'shaped ,size(.43*.88),(.58*1.38),.75 ht with one computer keeping facility and shelves using Prelaminated medium density fibre board IS:14587:1998 Marked ;with one sidedecorative lamination otherside balancing lamination Grade -1 (exterior grade ) inshelves with screws and fittings wherever required ;edges to be sealed with PVC edgebending tape 2.00 mm thick of approved brand ( fittings to be paid separately) |
| 32 | OD414550/2025-2026Providing and fixing 12mm thick frameless toughened glass of approved brand andmanufacture ,all complete as per direction of engineer-in-charge |
| 33 | OD414581/2025-2026Applying and fixing steel letters ( Malayalam, English) height up to 30cm and widthup to 1 inche including all charges etc complete |
| 34 | OD414588/2025-2026supplying and conveying and errecting in position CC rings of 1.20m dia dia 0.30mhandling and lowering in position including jointing CC rings with cement mortar etc |
| 35 | 13.88Removing white or colour wash by scrapping and sand papering and preparing thesurface smooth including necessary repairs to scratches etc. complete. |
| 36 | OD414638/2025-2026Labour engaged for site cleaning and tree branch cutting |
| 37 | OD414650/2025-2026labour engaged for carpentary work repair maintenance and clear all as per thedirection of engineer in charge Please Enable Macros to View BoQ information |
