|
| 1 | White washing (two coat) |
| 2 | White colour washing (two coat) |
| 3 | Wall painting with royal emulsion paint of approved brand and manufacturer to give an even shade with velvat rollar (three coats) |
| 4 | Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two or more coats) |
| 5 | Painting two or more coats with synthetic enamel paints in all shades on old wood work or metallic or plastered or concrete surface to give an even shade including rubbing down old paint. |
| 6 | Finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm |
| 7 | Providing surface treatment to external / internal wall with water resistant grade, anti fungal, anti rusting, antifoaming, high percentage acrylic binder washable surface with two coats to be provided with spatula over one coat cement primer including preparation of surface with water resistant grade match colour complete as per specifications and to the entire satisfaction of engineer- in- charge. |
| 8 | Scraping white wash and colour wash |
| 9 | Scraping :of emulsion/ oil bound paint |
| 10 | Removing old paint with caustic soda solution and preparing surface |
| 11 | Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish |
| 12 | Spirit polishing two coats including a coat of wood filler on wood work |
| 13 | Renewing glass panes with putty and nails wherever necessary (b) Glass panes weighing 10.75 Kg/sqm |
| 14 | Renewing glass panes with putty and nails wherever necessary (c) Frosted glass panes weighing 8.44 Kg/sqm |
| 15 | Wire gauge Hollock wood door shutter without springs housed in chowkhat (A) 35 mm thick |
| 16 | Semi Corrugated asbestes Sheet roofing 7 mm thick sheets fixed with G.I. hooks and bolts, limpet and bitumen washers complete fixed in position excluding the cost of perlins, rafters and trusses |
| 17 | 12.5 mm thick cement plaster 1:4 |
| 18 | Hollock wood doors shutter windows shutter including hinges, screws, chocks, cheats, stops cords etc. complete fixed in position. (a) panelled, glazed or glazed and panelled. (ii) 35 mm thick |
| 19 | Teak wood doors shutter and windows panelled glazed or panelled including Iron hinger, screws etc. complete fixed in position (excluding cost of tower bolts and handles but including labour for fittings the same) (Single Leaf) (a) 35mm thick |
| 20 | Teak wood chowkats including iron hold fasts, corner straps, iron hinges, cleats, stops, wooden knobs or handles fixed in position. (B) Double Rebate (60mm x 150mm) |
| 21 | Chowkats of commercial hard wood such as Hollock confirming to ISI specification no 1003 m kiln seasoned of doors and windows including iron hold fasts, corner straps cleats, stops, bolts for hold fasts etc, complete fixed in position (Section 60mm x 150mm) (A) Double Rebate (60mm x 150mm) (60mm x 150mm) |
| 22 | Hollock wood cup board shutter with plywood panels or faced on both side fixed in position (excluding the cost of handles, bolts hasp with staple but including the labour for fixing them) (b) 25 mm thick |
| 23 | Regrading terracing of mud plaster covered with tiles or bricks in cement by dismantling tiles or bricks, removing mud plaster, preparing the surface of mud plaster to proper, slope, relaying mud plaster Gobri leaping and tiles or bricks grouted in cement mortar 1:3 (1 cement and 3 fine sand) including replacing unserviceable tiles, or bricks with new over and disposal of unserviceable material to the dumping ground within 50m lead (The cost of new tiles or bricks excluded). |
| 24 | Providing and fixing hydraulic door closer ISI mark with necessary screw etc. complete (a) ISI designation no I (Size of door up to 700mm) |
| 25 | Providing and fixing of ¾\\" teak wood ply wood box in cupboard complete in all respect |
| 26 | Providing and laying Laminate wooden flooring (Grade AC4 or AC4+ laminates) 6 mm to 12 mm thick, having a good backing layer made up of plastic laminate or melamine, core made up of medium-density fiberboard (MDF),which is less resistant to impact damage and less resistant to being dented by heavy furniture, having a décor layer to give each floor its appearance and consisting of one or more sheets of paper impregnated with melamine resin and top wear layer having clear aluminum oxide finish that protects the decorative layer & imparts the desired level of sheen, from full gloss to low gloss, duly fixed to the base floor using adhesive as approved by the manufacturer |
| 27 | Providing and Fixing ceiling consisting of 12.5mm thick Gypsum Board of any size G.I. Cradling hanged from the ceiling by means of G.I. hanger complete as per drawings,specifications and to the entire satisfaction of engineer-in- charge. |
| 28 | Providing and fixing of fibre sheet i/c nut bolt, varsal etc complete in all respect |
| 29 | Providing and laying vitrified floor tiles in different sizes in light colour shades made using Full Body Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make na ideal choice for high traffic zones.) (a) Size 600x600 mm |
| 30 | Providing and laying 60 mm thick factory made cement concrete interlocking Paving blocks of M- 35 grade manufactured by block making machine equipped with steel mould clamped to a strong vibratory table with hydraulic pressure for compaction of concrete as per IRC SP 63 -2014 and of approved size and design / shape laid in Ordinary Grey Colour and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in- Charge. Please Enable Macros to View BoQ information |
