|
| 1 | Excavation of foundation in Hard soil within 50m initial lead and 1.5m initial lift. |
| 2 | Filling Foundation and plinth with well graded sand including watering and ramming. |
| 3 | Cement Concrete (1:4:8) with 40 mm size Hard Granite Metal. |
| 4 | Brick work with FLY ASH bricks inC.M(1:6) in foundation and plinth. |
| 5 | 2.50cm thick A.S.flooring with cement concrete (1:2:4) with 12mm size H.G.chips including cement punning. |
| 6 | R. R. H.G. stone masonry in C.M. (1: 6) in foundation and plinth works. |
| 7 | Brick Work with Fly Ash Bricks having crushing strength 75kg/sq.cm in cement mortar (1:6) in Super Structure. |
| 8 | RCC Work M-20 grade with 20 mm and down grade HG chips (CB) including hoisting,lowering & laying concrete and compacting. |
| 9 | Plinth Band and Column Base |
| 10 | Column and Beam |
| 11 | Lintel |
| 12 | Chajja |
| 13 | Straightening,Bending,Binding of M.S.Rod including cost of rod,Binding wire and transportation. |
| 14 | 20mm thick cement plaster in C.M(1:6)over Stone work. |
| 15 | 16mm thick cement plaster in C.M(1:6)over brick work. |
| 16 | 12 mm thick cement plastering C.M. (1: 6). |
| 17 | 6mm thick cement plaster in C.M(1:4) R CC surfaces. |
| 18 | Priming 1 coat with any approved Primer. Data for 9.3 Sqm. |
| 19 | Finishing walls with Emulsion paint of approved shade on new work to give even shade 2 coats. (inside) |
| 20 | Finishing walls with weather coat paint of approved shade two coat to give an even shade including cost of paint. |
| 21 | 20mm thick cement plaster in C.M(1:4) as grading Plaster. |
| 22 | Filling Foundation and plinth with Excavated Earth. |
| 23 | Supplying of MS Doors of windows. |
| 24 | Priming one coat with any approved red oxide over steel work. |
| 25 | Painting 2 coats with any approved iron paint on new iron work. |
| 26 | Recessed wiring to light point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5Amp, 250 V piano type switch ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. (Make of wire Finolex/ L&T / Anchor / Havels / V Guard). |
| 27 | a) Short point |
| 28 | b) Medium Point |
| 29 | Recessed wiring to fan point / exhaust fan point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5Amp, 250 V piano type switch ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection Medium Point. |
| 30 | Recessed wiring to 3pin 5 Amp plug point in single core multi strand copper wire on Existing board. |
| 31 | Supplying and fixing in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3pin 15 / 16 amps socket outlet and 15 / 16 amps piano type switch, connection, painting etc as required.(For light plugs to be used in non residential buildings |
| 32 | Supplying and fixing of 6 pin 15/16 amp one way modular socket outlet piano type on existing box/cover including connections etc as required. |
| 33 | Recessed wiring to submain in different sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with FR PVC insulated single core multistrand copper conductor as earth wire as required. |
| 34 | b) 2 x 2.5 mm² |
| 35 | Supplying and fixing batten holder / BK angle holder ISI marked including connection etc. as required. |
| 36 | Earthing with G.I earth pipe 3 meter long 40 mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangment and watering pipe etc with charcoal and salt as required. |
| 37 | Supply and fitting of 40W Single street light fittings complete with all accessories. |
| 38 | Supply and fitting of electronic fan regulator. |
| 39 | Ceiling fan 48/56\\"of any approved make with ISI including fitting and fixing. |
| 40 | Supply and fitting of 32A ICDP main switch on M.S box. |
| 41 | Supply and fitting of 6 mm2 PVC twin core Aluminium wire with G.I wire for service connection. |
| 42 | Supplying all materils,labour,T&P and fixing Rotational moulded polithylene cylindrical vertical water storage tanks (SYNTEX) conforming to IS 12701-1996 Including cutting holes through the tank and fixing mild steel tubes and fittings and providinng extra socket and jam nuts,fixing ball valve etc, including hoisting up to a height of extra 5 Meters above ground level and placing the tank to the required position etc, all as per speci fication and directionof the Engineer incharge. |
| 43 | 1000 liter capacity Syntex/FC Tank |
| 44 | Laying of 110mm nominal diameter UPVC SWR line including cost of materials. |
| 45 | Providing and fixing to wall or ceiling and floor pvc pipes class conforming to ASTM-D-1785/89 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification complete. |
| 46 | 25mm dia PVC pipe in ground floor |
| 47 | 20mm dia PVC pipe in ground floor |
| 48 | 15mm dia PVC pipe in ground floor |
| 49 | Cutting the G.I./Black iron pipes and inserting a fitting. (15mm to 25mm) |
| 50 | Cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages as per specification complete. (in ground floor) |
| 51 | Cutting holes through the brick or laterite masonary wall for taking G.I/PVC pipe and making good the damage in ground floor |
| 52 | Fixing of CP concealed Stop Cock conforming to IS:781-1995 of 15mm as per specification complete. |
| 53 | Supply, fitting and fixing of chromium plated brass towel rail 20mm dia x 600mm long complete including cost of all materials in ground floor |
| 54 | Supply, fitting and fixing of brass or G.M. fullway valve of following nominal diameter etc. complete including cost of all materials. (15mm dia ) |
| 55 | Supply, fitting and fixing of CP Brass short Body Bib cock of 15mm diameter in ground floor |
| 56 | Supplying all materials,labour, T&P fitting,fixing of Virtious China flat Wash basin over sizes 450 mm x 400 mm with hole for pillar taps conforming to IS 2556 : Part 4-2004 with cast iron or M.S Brackets painted white cement including cutting holes in walls and making good the damages etc. All complete as per specification and direction of the Engineer-in-charge. |
| 57 | Supplying all materials, labour, T&P fitting, fixing of PVC waste pipe for wash basin or sink i.e Flexible (Coil shaped) PVC Waste pipe 32mm dia with length not less than 700 mm with PVC waste fittings etc. All complete as per specification and direction of the Engineer-in-charge. |
| 58 | Supplying all materials,labour,T&P and fitting, fixing of Wash down water Closest (Europian type W.C pan) with Integral\\"S\\" or \\"P\\" trap conforming to IS 2556:Part 8-2004, to the floor with Wooden Plug And Chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc,,all complite as per specification and direction of the Engineer inchargr. (Without Seat &Cover). |
| 59 | Porcelain E.W.C. with P-trap |
| 60 | Supplying all materials,labour T &P Fitting of 10 liters capacity PVC LL flushing Cistern with manually controlled device (handle lever) conforming to IS :7231,etc all complete as per specification and direction of the Engineer incharge. |
| 61 | 10 litr pvc low level cistern with fittings |
| 62 | Supplying all materials,labour T &P Fitting of Plastic Seat and cover for wash down water closet with cromium plated brass hinges and rubber buffer etc all complete as per specification and direction of the Engineer in charge. |
| 63 | EWC PVC standard seat cover |
| 64 | Fixing pillar taps capstan head screw down high pressure lettered ‘Hot’ and ‘Cold’ with long screws, shanks and back nuts of the following nominal bore as per specification. |
| 65 | Supplying all materials, labour,T&P and fixing 600mmx125mm plate glass shelf with brackets and guard rail complete fixed to wooden plugs with CP screw as per specification and direction of Engineer in charge. |
| 66 | Supplying all materials,labour, T&P fitting,fixing 600mm x 450mm bevelled edge mirror of superior glass mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with chromium plated brass screws and washers complete as per specification and direction of the Engineer-in-charge. |
| 67 | Supplying all materials,labour,T&P , fitting and fixing of CP soap holder of appproved quality all complete as per the specification and direction of Engineer in charge. Please Enable Macros to View BoQ information |
