|
| 1 | Sub-Head : Concrete Work |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 3 | 1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 4 | Centering and shuttering including strutting, propping etc. and removal of form work for : |
| 5 | Foundations, footings, bases for columns. |
| 6 | Sub-Head : Reinforced Cement Concrete |
| 7 | Smooth finishing of the exposed surface of R.C.C. work with 6 mm thick cement mortar 1:3 (1 Cement : 3 fine sand). |
| 8 | Sub-Head : Masonry Work |
| 9 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : |
| 10 | Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 11 | Sub-Head : Steel Work |
| 12 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 13 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. |
| 14 | Hot finished welded type tubes. |
| 15 | Sub-Head : Flooring |
| 16 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. |
| 17 | 40 mm thick with 20 mm nominal size stone aggregate |
| 18 | Sub-Head : Roofing |
| 19 | Providing and fixing flat pressed 3 layer medium density particle board or graded particle board (Grade I) IS: 3087 marked, in ceiling with necessary nails etc. complete (frame work to be paid separately): |
| 20 | 12 mm thick |
| 21 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /seIf tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 22 | Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with Zinc coating 120 gram per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : |
| 23 | Ridges plain (500 - 600mm) |
| 24 | Extra for providing 0.60 mm PPGI profile sheet instead of 0.50 mm thick as per direction of Engineer-in-charge. |
| 25 | Extra for providing PPGI profile sheet in AZ 150 quality instead of AZ 80 quality in desired shape and colour as per direction of Engineer-in-charge. |
| 26 | Sub-Head : Finishing |
| 27 | 20 mm cement plaster of mix : |
| 28 | 1:4 (1 cement: 4 fine sand) |
| 29 | 12 mm cement plaster of mix : |
| 30 | 1:6 (1 cement: 6 coarse sand) |
| 31 | 15 mm cement plaster on rough side of single or half brick wall of mix : |
| 32 | 1:6 (1 cement: 6 coarse sand) |
| 33 | Applying priming coat : |
| 34 | With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works |
| 35 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : |
| 36 | Two or more coats on new work. |
| 37 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and of required shade and colour complete to give and even shade. |
| 38 | Old work (one or more coats) |
| 39 | White washing with lime to give an even shade : |
| 40 | Old work (two or more coats) . |
| 41 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 42 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 43 | One or more coats on old work. |
| 44 | Finishing walls with Acrylic Smooth exterior paint of required shade : |
| 45 | Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface). |
| 46 | Sub-Head : Repairs to Buildings |
| 47 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-harge. |
| 48 | With cement mortar 1:4 (1 cement : 4 fine sand). |
| 49 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: |
| 50 | Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm). |
| 51 | Taking out wind ties from roof including cutting out rusted bolts, nuts etc. and removing materials to any distance within compound and stacking. |
| 52 | Providing services of fabricator oriented work with his helper for repairing of steel windows for smooth functioning including replacement of its fittings if any, ( fittings shall be paid seperately) or repairing of smilar fabrication work including welding machine, grinder/cutter and electrode rods as per direction of Engineer-in-Charge. |
| 53 | Providing labour/ beldar for cleaning of roof malba, cutting of tree branches, removal of pipal/ bargad or other small trees, grass, bushes etc from the terrace of the building or as per direction of Engineer-in-Charge. |
| 54 | Credit of unserviceable fittings and other materials recieved from replacement / dismantling: |
| 55 | PVC fittings such as waste pipe, PVC connection pipe, PVC cistern fittings., PVC cistern handle, plastic seat of european w.c ., PVC Tank Covers, PVC Water tanks, PVC /UPVC/CPVC pipes & fittings etc & similar items |
| 56 | G.I. or Iron Pipe & fittings of all sizes all lenghts. old MS angles, flat, GI sheet and similar items |
| 57 | Repairing of dilapidated RCC roof ceiling, Chajjas and similar after removing scaled and damaged cement concrete/mortar by chipping with chisel and wire brush and finishing with cement mortar 20 mm to 40 mm thickness of mix 1:3 ( 1 cement :3 coarse sand) in layers not exceeding in 20 mm as directed by Engineer-in-Charge. |
| 58 | Removing heavy garrage door of size 3.08x2.46 m from position and sending it to fabricator shop and correction bent shape into plane and in proper alignment and refixing it in position as per direction of Engineer-in-Charge. |
| 59 | Sub-Head : Dismantling and Demolishing |
| 60 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.. |
| 61 | In cement mortar |
| 62 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: |
| 63 | G.S. Sheet |
| 64 | Dismantling of flushing cistern of all types (C.I./PVC/Vitreous China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. |
| 65 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 66 | Sub-Head : Sanitary Installations |
| 67 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. |
| 68 | 10 litre capacity - White |
| 69 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 70 | Semi rigid pipe |
| 71 | 32 mm dia |
| 72 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : |
| 73 | Rectangular shape 453x357 mm |
| 74 | Sub-Head : Water Supply |
| 75 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall |
| 76 | 20 mm nominal outer dia. Pipes. |
| 77 | 25 mm nominal outer dia .Pipes. |
| 78 | Providing and fixing uplasticised PVC connection pipe with brass unions : |
| 79 | 45 cm length |
| 80 | 15 mm nominal bore |
| 81 | Providing and fixing CPVC unions for CPVC pipe line including cutting and fixing. |
| 82 | 20 mm dia |
| 83 | for 25mm dia pipe line |
| 84 | Providing and fixing PTMT bib cock of approved quality and colour. |
| 85 | 15mm nominal bore, 86 mm long. Weighing not less than 88 gms. |
| 86 | Providing and fixing PTMT stop cock of approved quality and colour. |
| 87 | 15 mm nominal bore, 86 mm long. Weighing not less than 88 gms. |
| 88 | Providing and fixing PTMT pillar cock of approved quality and colour . |
| 89 | 15mm nominal bore, 107 mm long. Weighing not less than 110 gms. |
| 90 | Providing and fixing CPVC quarter turn gate valve of approved quality : |
| 91 | 25 mm nominal bore Please Enable Macros to View BoQ information |
