Tender For Day To Day Maintenance Work At Basti, Siddharthnagar And Santkabirnagar Distt. Head Quarter Building Under Oa Basti., Basti-Uttar Pradesh

TDR : 55375255

Tender Notice
BOQ

Expired

Basti , Uttar Pradesh

Tender Brief : Tender For Day To Day Maintenance Work At Basti, Siddharthnagar And Santkabirnagar Distt. Head Quarter Building Under Oa Basti.

Document Fees
₹ 590 /-

EMD
₹ 9924.0 /-

Tender Value
₹ 4.96 Lakhs /-

Submission Date
13-05-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
2	1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
3	Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:
4	Cement mortar 1:6 (1 cement : 6 coarse sand)
5	Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :
6	Cement mortar 1:6 (1 cement : 6 coarse sand)
7	Deduct for not providing hinges in doors, windows or clerestory window shutters with :
8	ISI marked Stainless steel butt hinges with stainless steel screws :
9	For 2nd class teak wood and other class of wood shutters
10	Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:
11	35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
12	25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws
13	Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).
14	Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws :
15	35 mm thick shutters.
16	With ISI marked stainless steel butt hinges of required size - Second class teak wood
17	Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets :
18	20 mm dia (heavy type)
19	Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete (Copper oxidised as per IS 1378)
20	300x16 mm
21	250x16 mm
22	Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete (Copper oxidised as per IS 1378)
23	250x10 mm
24	200x10 mm
25	Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete (Copper oxidised as per IS 1378)
26	125 mm
27	Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessaryaccessories and screws etc. complete.
28	Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :
29	300x16 mm
30	250x16 mm
31	Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :
32	300x10 mm
33	250x10 mm
34	200x10 mm
35	Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :
36	125 mm
37	Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.
38	Twin rubber stopper
39	Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.
40	Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).
41	Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-harge.
42	With cement mortar 1:4 (1 cement : 4 fine sand).
43	Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:
44	Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm).
45	Float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/sqm).
46	Raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering including disposal of rubbish to the dumping ground, all complete as per directions of Engineer-In-Charge.
47	Flush pointing with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement for flat tile bricks on top of mud phaska :
48	With F.P.S. brick tiles
49	Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required :
50	W.C. pan with ISI marked white solid plastic seat and lid
51	Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :
52	One urinal basin with 5 litre white P.V.C. automatic flushing cistern
53	Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :
54	Kitchen sink without drain board
55	610x460 mm bowl depth 200 mm.
56	Providing and fixing white vitreous china water closet squatting pan (Indian type) :
57	Orissa pattern W.C. pan of size 580x440 mm
58	Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan.
59	Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.
60	10 litre capacity - White
61	Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete :
62	White solid plastic seat with lid
63	Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings :
64	Flat back wash basin of size 550x400 mm.
65	Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
66	Semi rigid pipe
67	32 mm dia
68	Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
69	Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :
70	Rectangular shape 453x357 mm
71	Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.
72	600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.
73	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall
74	15 mm nominal outer dia. Pipes.
75	20 mm nominal outer dia. Pipes.
76	25 mm nominal outer dia .Pipes.
77	Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. : Internal work – Exposed on wall.
78	15 mm dia. nominal bore
79	20 mm dia. nominal bore
80	25 mm dia. nominal bore
81	Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. : External work
82	32 mm dia. nominal bore
83	40 mm dia. nominal bore
84	Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :
85	25 to 40 mm nominal bore
86	Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
87	25 mm nominal bore
88	20 mm nominal bore
89	Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :
90	20 mm nominal bore
91	25 mm nominal bore
92	Providing and fixing uplasticised PVC connection pipe with brass unions :
93	45 cm length
94	15 mm nominal bore
95	Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :
96	100 mm diameter
97	Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work)
98	32 mm nominal
99	40 mm nominal bore
100	50mm nominal bore
101	Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required :
102	15 mm nominal bore.
103	20 mm nominal bore.
104	25 mm nominal bore.
105	Providing and fixing covers for PVC water storage tanks with necessary MS / PVC clamps
106	For 500 litres capacity tanks
107	Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931:
108	15 mm nominal bore.
109	Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 :
110	15mm nominal bore
111	Providing and fixing PTMT bib cock of approved quality and colour.
112	15mm nominal bore, 86 mm long. Weighing not less than 88 gms.
113	Providing and fixing PTMT stop cock of approved quality and colour.
114	15 mm nominal bore, 86 mm long. Weighing not less than 88 gms.
115	Providing and fixing PTMT pillar cock of approved quality and colour .
116	15mm nominal bore, 107 mm long. Weighing not less than 110 gms.
117	Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour.
118	15 mm nominal bore with 45 cm length.
119	Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour.
120	25mm nominal bore. Weighing not less than 62 gms.
121	Repairing of leakage in main and branch water pipe lines of dia 25 to 40mm (external) as and when required i/c the cost of joining material such as cement, jute etc.
122	Repairing of leaking in SCI pipes immediately i/c the cost of sealing material such as jute & cement etc.
123	Repairing of Aluminium door/ window frame and shutter with required cleat screws after taking out the shutter i/c cost of labour etc. all complete as per direction of E-in-C.
124	Providing and fixing of pivot in aluminium door shutter etc. all complete as per direction of E-in-C.
125	Repairing of wooden doors with required cleat screws after taking out the shutter i/c cost of labour etc. all complete as per direction of E-in-C.
126	Providing manual assistance for plumbing sewer, masonry & carpentry work which are not covered above and are not possible to measure.
127	P/F 26 gauge aluminium sheet i/c necessary nails etc. complete as per direction of Engineer-in-charge.
128	P/F C.P. brass waste Jali for sink or wash basin.
129	32 mm dia
130	P/F PVC cover to over head PVC water storage tank i/c necessary nuts & bolts.
131	P/F stainless steel jail (grating) with or without hole for waste pipe for floor/Nahani trap.
132	100 mm dia weight not less than 100 gms.
133	Cleaning of over-head/under-ground tank by dewatering, removing the sludge, rubbing & cleaning with bleaching powder i/c writing date of cleaning on the tank, etc. all complete as per directions of the Engr.-in-charge (once in Six Months)
134	PVC Tank from 500 to 1000 litre capacity.
135	Cleaning of Manhole with connecting sewer line and disposal of malva out side compound etc all complete as per direction of E-in-C.
136	Providing unskilled labour for day to day maintenance purpose.
137	P/F PVC Syphon to PVC low level cistern all complete as per direction of Engineer-in-charge.
138	P/F MS bracket 40x40x5mm of size 40 cm. for fixing of wash basin and making good the same.
139	P/F SCI P trap to WC pan i/c labour charges & other fixing materials etc. all complete as per direction of Engineer_in_charge.
140	Replacing damaged G.I. Jali in Jali doors/windows i/c cost of material & labour all complete as per direction of Engineer-in-charge.
141	Removal of chockage of floor/nahani trap, Ptrap, rain water pipe G.I. Supply lines & sanitary / drainage pipe lines etc. complete as per direction of E.-in-C.
142	Cartage of welding machine from shop to site and sending back from site to shop including hire charges all complete as per directions of the Engr. In charge.
143	Welding of brocken M S items such grills, door & window frames and pivots etc complete as per direction of Engineer in charge
144	Uprooting and cutting plants grown on the walls of buildings i/c dismentling brick work wherever required and making the same good complete as per directios of the Engineer in Charge.
145	Disposal of malba out of compound upto municipal dump by mechanical means i/c loading and unloading complete as per directios of the Engineer in Charge. Please Enable Macros to View BoQ information

Need a Bussiness Loan? Apply Now!
Buy Digital Signature
Bidding Support

Also Visit

Tenders

Uttar Pradesh Tenders

Services Tenders

Hospitality Related Services Tenders

Housekeeping Services Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Day To Day Maintenance Work At Basti, Siddharthnagar And Santkabirnagar Distt. Head Quarter Building Under Oa Basti., Basti-Uttar Pradesh

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Sl. No.	Item Description
1	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
2	1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
3	Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:
4	Cement mortar 1:6 (1 cement : 6 coarse sand)
5	Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :
6	Cement mortar 1:6 (1 cement : 6 coarse sand)
7	Deduct for not providing hinges in doors, windows or clerestory window shutters with :
8	ISI marked Stainless steel butt hinges with stainless steel screws :
9	For 2nd class teak wood and other class of wood shutters
10	Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:
11	35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
12	25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws
13	Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).
14	Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws :
15	35 mm thick shutters.
16	With ISI marked stainless steel butt hinges of required size - Second class teak wood
17	Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets :
18	20 mm dia (heavy type)
19	Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete (Copper oxidised as per IS 1378)
20	300x16 mm
21	250x16 mm
22	Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete (Copper oxidised as per IS 1378)
23	250x10 mm
24	200x10 mm
25	Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete (Copper oxidised as per IS 1378)
26	125 mm
27	Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessaryaccessories and screws etc. complete.
28	Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :
29	300x16 mm
30	250x16 mm
31	Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :
32	300x10 mm
33	250x10 mm
34	200x10 mm
35	Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :
36	125 mm
37	Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.
38	Twin rubber stopper
39	Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.
40	Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).
41	Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-harge.
42	With cement mortar 1:4 (1 cement : 4 fine sand).
43	Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:
44	Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm).
45	Float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/sqm).
46	Raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering including disposal of rubbish to the dumping ground, all complete as per directions of Engineer-In-Charge.
47	Flush pointing with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement for flat tile bricks on top of mud phaska :
48	With F.P.S. brick tiles
49	Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required :
50	W.C. pan with ISI marked white solid plastic seat and lid
51	Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :
52	One urinal basin with 5 litre white P.V.C. automatic flushing cistern
53	Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :
54	Kitchen sink without drain board
55	610x460 mm bowl depth 200 mm.
56	Providing and fixing white vitreous china water closet squatting pan (Indian type) :
57	Orissa pattern W.C. pan of size 580x440 mm
58	Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan.
59	Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.
60	10 litre capacity - White
61	Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete :
62	White solid plastic seat with lid
63	Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings :
64	Flat back wash basin of size 550x400 mm.
65	Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
66	Semi rigid pipe
67	32 mm dia
68	Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
69	Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :
70	Rectangular shape 453x357 mm
71	Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.
72	600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.
73	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall
74	15 mm nominal outer dia. Pipes.
75	20 mm nominal outer dia. Pipes.
76	25 mm nominal outer dia .Pipes.
77	Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. : Internal work – Exposed on wall.
78	15 mm dia. nominal bore
79	20 mm dia. nominal bore
80	25 mm dia. nominal bore
81	Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. : External work
82	32 mm dia. nominal bore
83	40 mm dia. nominal bore
84	Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :
85	25 to 40 mm nominal bore
86	Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
87	25 mm nominal bore
88	20 mm nominal bore
89	Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :
90	20 mm nominal bore
91	25 mm nominal bore
92	Providing and fixing uplasticised PVC connection pipe with brass unions :
93	45 cm length
94	15 mm nominal bore
95	Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :
96	100 mm diameter
97	Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work)
98	32 mm nominal
99	40 mm nominal bore
100	50mm nominal bore
101	Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required :
102	15 mm nominal bore.
103	20 mm nominal bore.
104	25 mm nominal bore.
105	Providing and fixing covers for PVC water storage tanks with necessary MS / PVC clamps
106	For 500 litres capacity tanks
107	Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931:
108	15 mm nominal bore.
109	Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 :
110	15mm nominal bore
111	Providing and fixing PTMT bib cock of approved quality and colour.
112	15mm nominal bore, 86 mm long. Weighing not less than 88 gms.
113	Providing and fixing PTMT stop cock of approved quality and colour.
114	15 mm nominal bore, 86 mm long. Weighing not less than 88 gms.
115	Providing and fixing PTMT pillar cock of approved quality and colour .
116	15mm nominal bore, 107 mm long. Weighing not less than 110 gms.
117	Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour.
118	15 mm nominal bore with 45 cm length.
119	Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour.
120	25mm nominal bore. Weighing not less than 62 gms.
121	Repairing of leakage in main and branch water pipe lines of dia 25 to 40mm (external) as and when required i/c the cost of joining material such as cement, jute etc.
122	Repairing of leaking in SCI pipes immediately i/c the cost of sealing material such as jute & cement etc.
123	Repairing of Aluminium door/ window frame and shutter with required cleat screws after taking out the shutter i/c cost of labour etc. all complete as per direction of E-in-C.
124	Providing and fixing of pivot in aluminium door shutter etc. all complete as per direction of E-in-C.
125	Repairing of wooden doors with required cleat screws after taking out the shutter i/c cost of labour etc. all complete as per direction of E-in-C.
126	Providing manual assistance for plumbing sewer, masonry & carpentry work which are not covered above and are not possible to measure.
127	P/F 26 gauge aluminium sheet i/c necessary nails etc. complete as per direction of Engineer-in-charge.
128	P/F C.P. brass waste Jali for sink or wash basin.
129	32 mm dia
130	P/F PVC cover to over head PVC water storage tank i/c necessary nuts & bolts.
131	P/F stainless steel jail (grating) with or without hole for waste pipe for floor/Nahani trap.
132	100 mm dia weight not less than 100 gms.
133	Cleaning of over-head/under-ground tank by dewatering, removing the sludge, rubbing & cleaning with bleaching powder i/c writing date of cleaning on the tank, etc. all complete as per directions of the Engr.-in-charge (once in Six Months)
134	PVC Tank from 500 to 1000 litre capacity.
135	Cleaning of Manhole with connecting sewer line and disposal of malva out side compound etc all complete as per direction of E-in-C.
136	Providing unskilled labour for day to day maintenance purpose.
137	P/F PVC Syphon to PVC low level cistern all complete as per direction of Engineer-in-charge.
138	P/F MS bracket 40x40x5mm of size 40 cm. for fixing of wash basin and making good the same.
139	P/F SCI P trap to WC pan i/c labour charges & other fixing materials etc. all complete as per direction of Engineer_in_charge.
140	Replacing damaged G.I. Jali in Jali doors/windows i/c cost of material & labour all complete as per direction of Engineer-in-charge.
141	Removal of chockage of floor/nahani trap, Ptrap, rain water pipe G.I. Supply lines & sanitary / drainage pipe lines etc. complete as per direction of E.-in-C.
142	Cartage of welding machine from shop to site and sending back from site to shop including hire charges all complete as per directions of the Engr. In charge.
143	Welding of brocken M S items such grills, door & window frames and pivots etc complete as per direction of Engineer in charge
144	Uprooting and cutting plants grown on the walls of buildings i/c dismentling brick work wherever required and making the same good complete as per directios of the Engineer in Charge.
145	Disposal of malba out of compound upto municipal dump by mechanical means i/c loading and unloading complete as per directios of the Engineer in Charge. Please Enable Macros to View BoQ information

Tender For Day To Day Maintenance Work At Basti, Siddharthnagar And Santkabirnagar Distt. Head Quarter Building Under Oa Basti., Basti-Uttar Pradesh

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us