|
| 1 | Taking down cement plaster of any description, on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified.. |
| 2 | M&L for 15mm thick rendering on fair faces of brick/ concrete surfaces in CM (1:4) finished even and smooth without using extra cement complete all as specified. |
| 3 | M&L for Rendering 10 mm thick in cement mortar 1:6, on brick or concrete surfaces, trowelled to even and fair finish without using extra cement complete all as specified. |
| 4 | M&L for Rendering 5 mm thick in cement mortar 1:3 as on concrete surfaces in ceiling finished even and smooth without using extra cement all as specified. |
| 5 | M & L for preparation of old decorated plastered surface including all cornices of walls and applying one coat of white wash complete all as specified. |
| 6 | All as per item No. 5 above but two coats of white wash on new surfaces complete all as specified and directed. |
| 7 | All as per item No. 5 above but one coat of white wash on ceiling complete all as specified and directed. |
| 8 | M & L applying one coat of cement base paint on old decorated plastered surfaces of walls including preparation of surfaces complete all as specified and directed. |
| 9 | M&L for preparation of old decorated plastered surfaces of walls and applying one coat of oil bound distemper (light shade) including filling of cracks/holes by crack filler or putty, removing unnecessary nails complete all as specified and directed. |
| 10 | All as per item No.9 above but two coats of oil emulsion distemper. |
| 11 | M&L for Complete removal of existing treatment, washing, scrubbing down, preparing surfaces and applying 1.5mm thick putty on walls surface all as specified. |
| 12 | M&L for one coat of synthetic enamel paint on wooden surfaces of any description , not otherwise described over 10 cm width of girth including preparation of old painted surfaces complete all as specified |
| 13 | All as per item No.12 above but two coats of synthetic enamel paint |
| 14 | M&L for one coat of synthetic enamel paint on steel surfaces of any description , not otherwise described over 10 cm width of girth including preparation of old painted surfaces complete all as specified. |
| 15 | M&L for complete removal of old decorated plastered or unplaster surfaces of walls and applying two coats of exterior emulsion paint (light shade) by using roller/brush to external walls/RCC surfaces/soffits of chajjas/roof projections/ cantilevers /balcony etc surfaces as recommended by manufacturer of exterior emulsion by using brands of emulsion including filling of cracks/holes by crack filler complete all as specified and directed. |
| 16 | M&L for preparation of old decorated plastered surfaces of walls and applying one coat of exterior emulsion paint (light shade) by using roller to prepared external walls/RCC surfaces /soffits of chajjas/roof projections/cantilevers /balcony etc surfaces as recommended by manufacturer of exterior emulsion by using following of emulsion including filling of cracks/holes by crack filler complete all as specified and directed. |
| 17 | M&L for preparing old decorative plastered surface of walls by complete removal of existing treatment on walls washing down and applying two coats of luster paint on walls/Ceiling over a coat of primer including preparation of old surfaces filling of cracks , if any with suitable putty or filler all as specified and directed by Engr-in-charge. |
| 18 | M & L applying two coat of cement base paint on old decorated plastered surfaces of walls including complete removal of existing treatment preparation of surfaces complete all as specified and directed by |
| 19 | M&L for preparation of new plstered surfaces and applying two coat of cement base paint on walls, white or tinted all as specified and directed. |
| 20 | M&L preparation of new plastered surface of walls and applying two coats of oil bound distemper over 1.5mm thick wall care putty complete. |
| 21 | M&L for Preparation of newly plastered surfaces of ceiling & applying three coats of white wash all as specified and directed by Engineer in charge.. |
| 22 | S & F in repais Vitreous china squatting pan, Orissa pattern size 580 x 440 mm white, with integral foot rests ( excluding flushing cistern and flush pipe )Complete all as specified. |
| 23 | S & F in repairs Vitreous China wash basin, white, flat back, size 580 x 450 mm excluding taps, waste, chain and plug and porcelain stopper but including brackets with 32 mm dia Waste fittings, brass, chromium plated with waste pipe complete all as specified. |
| 24 | S & F in rep vitreous china wash down water closet pan (pedestal pattern), white including connection to drain (or outgoing pipe) and to flushing pipe with and including S & F plastic water closet seat, white closed pattern with flat bottom, cover and mild steel hinges device complete all as specified. |
| 25 | S & F in repair 15 mm bore, fancy type, bib taps, chromium plated screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by Engr-in-Charge. Make : Cat Part No QQT-7037 of Jaquar or equivalent in kohlar, grohe and Roca |
| 26 | S & F 15mm bore pillar taps, cast copper alloy with capstan heads, chromium plated,fancy type screwed down high pressure with or without lettered “HOT” or “COLD” with long screwed shanks and fly nuts complete as fixed in repairs complete all as specified. Make- Jaquar or equivalent in kohlar, grohe and Roca |
| 27 | S & F in repair 32mm bore waste fittings, brass chromium plated with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified. |
| 28 | S & F15mm bore, 450mm long, PVC connections with brass unions internally threaded both ends complete fixed to iron pipe at both ends as fixed in repairs complete all as specified. |
| 29 | S & F in repair 15 mm bore, fancy type, angular valve, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed by Engr-in-Charge. Make : Cat Part No QQT-7053 of Jaquar or equivalent in kohlar, grohe and Roca |
| 30 | S & F flush pipe of polyethylene of low or high density or PVC, 32mm dia for low level flushing cistern/basins complete as fixed in repairs complete all as specified. |
| 31 | S & F LDPE pipe 32mm bore fixed to wall/ceiling with bends/elbow complete fixed in repairs complete all as specified. |
| 32 | S & F gratings 150 mm dia of PTMT with or without centre hole for waste pipe ( Minimum wt 25 gms ) complete all as specified. |
| 33 | S & F in repairs ball valve high pressure of PTMT wiyh epoxy coated , aluminium rod & high density plastic ball complete screwed for iron pipe or brass ferrule 25 mm bore complete.( 455 gms weight ) complete all as specified. |
| 34 | S & F in repairs ball valve high pressure of PTMT with epoxy coated , aluminium rod & high density plastic ball complete screwed for iron pipe or brass ferrule 20 mm bore complete.( 210 gms weight ) complete all as specified. |
| 35 | S & F in repairs ball valve high pressure of PTMT wiyh epoxy coated , aluminium rod & high density plastic ball complete screwed for iron pipe or brass ferrule 15 mm bore complete.( 142 gms weight ) complete all as specified. |
| 36 | Cleaning & removing all scale and dirt etc from tank and from mouth of circulating pipe etc of 500 Ltrs capacity complete all as specified. |
| 37 | Cleaning & removing all scale and dirt etc from tank and from mouth of circulating pipe etc of 1000 Ltrs capacity complete all as specified. |
| 38 | M&L writing letters or figures (Block, Roman, Italic or Indian) n exc 30 cm height. |
| 39 | S & F floor door stopper of aluminium alloy and tongue, anodised with hard drawn steel overall length of cover plate 140mm.as in repairs complete all as specified. |
| 40 | S & F MS wire cloth 0.40 mm nominal dia of wire and average width of aperture 1.18mm fixed with finned tacks or galvanized wire staples all as specified including dismantling wire mesh any type & in any position fixed in repairs complete all as specified. |
| 41 | M & L for sheet glass 3mm thick ordinary quality and glazing with oil putty, each pane n, exc 0.5Sq.M in area.including hacking out old broken glass any thickness as in repairs complete all as specified. |
| 42 | M & L for frosted glass 3mm thick ordinary quality and glazing with oil putty, each pane n, exc 0.5Sq.M in area.including hacking out old broken glass any thickness as in repairs complete all as specified. |
| 43 | S & F 75mm long but hinges medium weight cold rolled mild steel complete all as specified. |
| 44 | S & F in repair mild steel ordinary rat tail rod pattern spring 300mm size including roller & roller plate complete all as specified. |
| 45 | S & F in repair MS sliding door bolt 300mm long plate type, stove enameled black with bright bolt not less than 12mm dia with and including a minimum of bolts & nuts 4 on bolt plate & 2 on staple plate fixed in repairs complete all as specified. |
| 46 | Supply and fix hasp and staple aluminium anodished safety type with mild steel hinges pin incl bolt to hinge plate and fixed with screw 125mm size. |
| 47 | Taking down pelmet box of any description with curtain rod. |
| 48 | S&F Stainless steel 25mm bore as in curtain rod complete incl fixing fancy type brackets, stops etc all as specified & directed as in repair (For the purpose of measurement and payment running length of curtain rod only shall be considered). |
| 49 | S&F 150 mm long powder coated black tower bolts of extruded section complete fixed in repairs complete all as specified. |
| 50 | All as per Item no 49 above but length of bolt 100 mm -ditto- |
| 51 | S&F 150 mm size Stainless steel handle fixed in repairs |
| 52 | All as per Item No 51 above but 100 mm size |
| 53 | M&L 300 mm long Aluminium alloy anodized sliding door bolts with Hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete fixed in repairs complete all as specified. |
| 54 | S&F in repairs Prelaminated particle board of 18/19mm thick, interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination with teak wood leaping fixed with screws as in Cupboard shutters of bed room, kitchen and internal shelves including taking down shutter/shelves complete all as specified. |
| 55 | S&F in repairs continuous (piano) hinges mild steel, bright finish or electro galvanised 30mm wide complete all as specified. |
| 56 | Dismantling PVC Pipes with fittings upto 75mm to 110mm dia complete all as specified and directed by Engr-in charge.. |
| 57 | S & F PVC pipe 75 mm dia single socked in any linth with rubber ring joints fix to wall complete all as specified. |
| 58 | S & F PVC pipe 110 mm dia single socked in any linth with rubber ring joints fix to wall complete all as specified. |
| 59 | S & F PVC pipe 75 mm dia bends any redius complete all as specified. |
| 60 | S & F PVC pipe 110 mm dia bends any redius complete all as specified. |
| 61 | S & F PVC vent cowl 110 mm complete all as specified. |
| 62 | S & F in repairs 10 Litrs PVC valveless,low level flushing cistern, low level, white with inlet, ball valve, float and handle including brackets with 32 mm dia flush pipe of polyethylene of low or high density or PVC, for low level cistern complete all as specified. |
| 63 | S&F Brass chromium plated Tubulars towel rail 20mm dia 'D\\" type 60cm long complete all as specified. |
| 64 | S&F plastic watercloset seat, black closed pattern with flat bottom and cover and mild steel chromium plated or aluminum hinges fixed in repairs complete all as specified. |
| 65 | S&F Ball catches with 8mm dia steel ball and brass body and striking plate including letting in and fixing complete all as specified. |
| 66 | S&Fin repair brass chromium plated Basin mixer for mixing hot & cold water screwed down for iron pipe of 15mm bore all as specified and as directed. Make: Jaquar Cat Part No ORP-10011BPM as per equivalent /Hindware/Kohlar |
| 67 | S&F in repair wall mixture mixing valves incl. three joints to steel pipes or unions 15 mm bore, best quality as per sample approved by GE. Make - Jaquar as per equivalent /Hindware/Kohlar |
| 68 | S&F in repair healthfaucet with 1mtr long easy flex tube in chrome Finish and wall hook of 15 mm bore with CP pipe complete set of make -Jaquar cat part No ALD - 565 as equivalent, parryware/Prayag |
| 69 | S&F 8mm thick corner glass shelf fixed with brackets and including chromium plated brass screws and wooden/plastic cleats all as specified and directed by Engr-in-charge. |
| 70 | S&F in repair 15 mm any type of spandle for stop cock, bib tap, pillar tap, wash basin mixer and wall mixer etc all as specified and directed by Engr-in- charge. |
| 71 | S&F in repairs chromium plated shower roses with swivel joints 125 mm dia size incl fixing to GI pipe/union fixed in repairs. |
| 72 | S&F chromium plated Toilet paper holder all as specified.MAKE -Jaquar or Equivalent in Kohlar,grohe and Roca |
| 73 | Dismantling of old water tank water tanks exc 250 Ltr & not exc 500 ltrs capacity complete all as specified and directed. |
| 74 | Supply and and fixing, hoisting PVC tank of 500 ltr capacity including Supplied and fixed 20 mm dia PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed.(Minimum weight 15mm-142 gms/20mm-210gms/25mm-455 gms/40mm-690 gms float valve assembly complete all as specified and directed. |
| 75 | S & F in repairs Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm.with 32 mm dia Waste fittings, brass chromium plated complete all as specified. |
| 76 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations all as specified. |
| 77 | S&F soap dish chromium plated and type fixed to plugs with CP brass screw fixed in repairs.MAKE -Jaquar or Equivalent in Kohlar,grohe and Roca. |
| 78 | M&L for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exc 10 cm girth all as specified. |
| 79 | M&L special treatment to floor/wall of bathroom with 10mm thick plaster in CM 1:4 with WPC liquid Complast 421 and applying one coat each of Nittoproof 100 and Nittoproof 120 on plastered surfaces.rendering again 10mm thick in CM 1:4 mixed with Complast - 421 complete all as specified and as directed. Product Make: Dr fixit, Sikka,Fosroc |
| 80 | M&L Plywood 4 mm thick, grade BWR, type BB fixed with nails to timber frame work complete all as specified. |
| 81 | S&F Fancy type Size 600x 900 mm looking mirror of selected quality glass 6mm thick edge moulding fixed with stainless steel knob complete all as specified |
| 82 | Checking and attending work in repairs to steel windows,handles,door springs,iron frame of doors rolling shutter garrages and other iron misc works,repair by welding (run or spot welding as per site requirment) alongwith welding machine gloves welding glass,welding rod etc(The cost of welding rod shall be included in this unit rate) incl all T & P as required at site complete all as specified. |
| 83 | S&F in repairs door closer hydraulically regulated of aluminium (die cast ) body designation No-2,universal type,suitable for door shutters of 701 to 850 mm in width and of wight between 36 to 60 kg and fixed all as specified and as directed. |
| 84 | S&F double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloly sheet foundation box main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty. |
| 85 | S&F in repair mortice lock made of mild steel having four lever fixed in position complete all as specified |
| 86 | Supply only mild steel latch for cupboard all as specified |
| 87 | M & L for Artificer Granite (of any type) 12-15mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types over 10mm thick screed bed in CM 1:4 and jointed in neat cement slurry and pointed in white or coloured cement to match complete. incl taking down of existing plaster/tiles/granite |
| 88 | S&F vitreous china premium/1st quality wash down water closet single piece EWC S/P trap white/ivory/off white including connection to drain (or out going pipe), antisyphonagee pipe,etc.,and incl. plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, incl 100mm dia cast iron sanitary connections—short connections pipe of length upto 600 mm complete and taking down existing of any description/size complete in all respect all as specified.Make : Cera or equivalent from Parryware/Hindware as approved |
| 89 | Taking up or down existing steel tubing and connections, 15mm bore complete all as specified. |
| 90 | S&F for CPVC pipe fixed on wall/ceiling or laying in floor of 16 mm bore with all fittings complete all as specified. |
| 91 | Taking up or down existing steel tubing and connections, 20mm bore complete all as specified. |
| 92 | S&F for CPVC pipe fixed on wall/ceiling or laying in floor of 20mm bore with all fittings complete all as specified. |
| 93 | S&F 18 mm thick plywood BWR type BB, fixed with screws to timber frame work complete all as specified and directed. |
| 94 | S&F 30 mm thick factory made flush shutter, solid core construction ,with block board core and plywood face panels , commercial type on both faces including teak wood beading 6mm thick all around, complete all as specified. |
| 95 | M&L for 1 to 2 mm thick decorative laminate teak wood plywood type 1, of surface finish, colour and pattern as approved fixed with approved adhesive as per manufacturer instructions etc., complete all as specified. |
| 96 | M&L for PU Polish uses a polyurethane based coating to provide a durable,glossy and elegant finish to wooden surfaces all as specified and directed. |
| 97 | Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified. Please Enable Macros to View BoQ information |
