|
| 1 | M&L for Rendering 15 mm thick on external surface of wall and shaft with Ready Mix mortar mixed with WPC as per manufacturer's instructions, surfaces finished even and smooth without using extra cement complete including taking down cement plaster on brick or stone walling built in CM including raking out joints hacking for key scrubbing down with water all as specified and directed. Note :- 1. WPC shall be measured & paid separately.2. Work to be carried upto 12 mtr height |
| 2 | Supply only Liquid water proofing compound complete all as specified |
| 3 | M & L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as directed.(Work to be carried upto 12 mtr ht) |
| 4 | Complete removing of existing treatment from wall surfaces complete all as specified and directed. |
| 5 | M & L for applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces complete all as directed.(Work to be carried upto 12 mtr ht) |
| 6 | M&L for two coats of distempering with 1st quality acrylic distemper (ready mixed) on wall surface having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification over 1mm thick damp proof wall care putty complete all as specified and directed. |
| 7 | Complete removal of existing treatment from ceilling complete all as specified and directed. |
| 8 | M&L for two coats of Distempering with 1st quality acrylic distemper (ready mixed) on ceiling surface having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification over 1mm thick damp proof wall care putty complete all as specified and directed. |
| 9 | Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as directed. |
| 10 | M&L for Machine cut kota stone slab flooring 28-30 mm thick laid over 20mm thick cement sand screed CM 1:6 as base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab and rubbing and polishing complete all as directed. |
| 11 | Demolition of existing un-reinforced cement concrete in ground floors and pavings n exc 15 cm thickness complete all as directed. |
| 12 | M&L for 75mm thick plain cement concrete 1:4:8, type D-2 ( using 40mm graded crushed stone aggregate) as in sub base etc complete all as specified and directed. |
| 13 | M&L for 25mm thick plain cement concrete 1:2:4, type B-0 ( using 12.5mm graded crussed stone aggregate) as in sub floors below tile/stone flooring etc as levelling course complete all as specified and directed. |
| 14 | M&L for providing and laying in position approved 18mm to 20mm thick high end Onyx Italian Marble such as Tiger onyx stone or equivalent approved for bar countertop work in required size and pattern as directed including 15mm thick screed bed with 1:4 white cement mortar (1 cement : 4 coarse sand), pointing, joints finished in line and level and flushed in matching colour cement, curing, rubbing, machine mirror grade polishing, washing, cleaning and sealer for anti-stain of Aqua mix brand etc complete all as specified and directed by Engr-in- charge. |
| 15 | M&L for Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in coloured tile grout to match the shade of tiles with and including laying of 15 mm thick screed bed or bedding layer in cement mortar 1:6, complete including dismantling of existing floor tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as directed. |
| 16 | M&L, for 75 mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection or similar places and finishing the surface even & smooth without using extra cement including making joints 12mm wide to the full depth of PCC at every 3 meter and every change of direction and filling the same with mixture of bitumen & sand in ratio (1:1) by weight including necessary form work etc complete all as specified and directed. |
| 17 | M&L for Glazed ceramic coloued tiles size 450mm X 300mm X 7-8mm thick, as in vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in colour tile grout including 10 mm thick rendering in ready mix cement mortar, finished the surface rough to receive tiles including dismantling of existing wall tiling including cement mortar backing(1:4) and rubbish off the premises complete all as directed. Make : Somany, Kajaria & Orient |
| 18 | Demolition of reinforced cement concrete cover slab of MH/Spetic tank (reinforcement cut as required to facilitate demolition) and removing the debris to a distance not exc 500 M as directed. |
| 19 | M&L for precast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate for cover slab for Man holes/Septic tank set in CM 1:4 complete all as specified |
| 20 | M&L 10 mm dia and over TMT bar cut to length, bend to shape required incl cranking bending & hooking ends & binding with MS wire annealed not less 0.9mm dia or securing with clips complete all as specified. |
| 21 | M&L for Factory made Precast heavy duty RCC drain cover 80mm thick with using 10mm dia reinforcement TMT bar including 1.00mm thick MS plain sheet frame on edges with two coats of anti-corrosive paint over primer all complete as specified and directed. |
| 22 | M&L for Brick work with sub class 'B' bricks (old size) straight or curved on plan exc 6.00m mean radius built in CM (1:6) including demolition of brick work/stone masonry built in cement mortar complete all as specified and directed. |
| 23 | M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified |
| 24 | Demolition of existing un-reinforced cement concrete of any description and in any position not otherwise specifically provided for including mudpuska on roof top complete all as directed. |
| 25 | M&L for PCC 1: 3 : 6, type C-2, using 20 mm graded crussed stone aggregates in surface channels and drains including necessary use & waste of formwork complete all as specified and directed. |
| 26 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi tred/stopped ends etc complete all as specified and directed. |
| 27 | Supply and fixing in repair 150 mm Reinforced concrete pipes, class NP3, laid and jointed complete with collars laid in trenches and jointed complete all as specified |
| 28 | M&L PCC 1:3:6, type C-2, using 40 mm graded crussed stone aggregate for Concrete bed to 150mm drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in complete all as specified |
| 29 | M & L for providing and fixing stainless steel (Grade 304) drain grating channel with frame and cover made of solid bars, hollow tubes, channels, plates, plain sheet etc as per direction of Engr-in-Charge including welding, grinding, buffing, polishing and making curvature, moulding, curved shape (where ever required) and fitting the same with necessary stainless steel nuts and bolts with guidlines of Engr-in-Charge complete of required size, on the bottom and sides of drains with suitable arrangement complete all as specified |
| 30 | Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area exc 1.5 Sqm but n.exc 4.0 Sqm each complete all as specified |
| 31 | Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area n.exc 1.50 Sqm each complete all as specified |
| 32 | S&F for Factory made single extruded WPC (WoodPolymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprisingof virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant , and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 33 | S&F for Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant, bothside laminated and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 34 | S & F Pressed steel frames(105 x 60mm) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified |
| 35 | S&F Pressed steel door frame of size 125 x 60mm for doors with one or more rebates incl necessary fixing lugs hinges, lock strike plate etc complee all as specified. The rates include for one shop coat of priming. |
| 36 | S&F 35mm thick 2nd class H.W. ( Teak wood) plain framed panelled shutters (any number of panels as approved by Engr-in-Charge) with lock rail and panel of 12 mm B.W.P commercial plywood veneered on both face, size of rails and stiles as per IS 1003 (part-I) kiln seasoned and chemical pressure treated complete all as specified |
| 37 | S&F 35mm thick 2nd class H.W. ( Teak wood) glazed and skeleton shutter, open rebated and prepared to receive glass, gauge etc(with out sash bars) edges of framing plain, chamfered or rounded, fitted with cut aand mitered beads for securing glass/gauze etc, sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (a) complete all as specified |
| 38 | Providing and fixing factory made uPVC any colour fixed window made of extruded profiles with wall thickness of 2.3mm(+-0.2mm). Window profile with hollow section with multi chamber. Frame (60mm x 58mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware, EPDM gasket. 1.2 +–0.2mm thick, galvanized steel Frame (28mm x 21.5mm), T profile (27mm x 17 mrn) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners - 5mm thick glazing with 6mm thich toughened glass (Note: The unit rate quoted by contractor includes cost of glass and all other connected accessories. Net opening will be measured for payment purpose.) |
| 39 | Providing and fixing factory made uPVC any color Sliding window Two track made of extruded profiles with wall thickness of 2.3mm (+- 0.2mm). Window profile with hollow section with multi chamber, Frame (60mm x 62mm). sash (42mm x 67mm). Sliding Interlock (One vertical length in each shutters) (45.5mm x 28mm). Glazing bead (24.5mmx 16mm) will he mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc.. making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel frame (30mm x 21.5mm), Sash (30mm x 18mm), profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. Hardware : [Touch Lock of zinc alloyed (white powder coated), steel roller system including 6mm thick glazing with toughened glass, aluminum track on bottom rail for two track sliding frame, wool pine for Sliding sash and interlock and incl cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) |
| 40 | Supply and fixing factory made uPVC any colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size incl 5mm thick glass and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. |
| 41 | M&L PCC(1:3:6) type C1 as in bed blocks for hold fast including necesssary formwork complete all as specified |
| 42 | M&L for preparation of new untreated steel surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of Synthetic enamel paint over a coat of red oxide primer complete all as specified |
| 43 | M&L for Mild steel works as in bands, straps, hold fast, wind ties, angle cleats and similar small articles etc conforming to Fe-290 Gde E-165 complete all as specified |
| 44 | S&F 100mm Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, typeB-11 complete all as directed |
| 45 | S&F 300mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing boltwith rolled or drawn brass bolts and fixed complete all as specified and directed |
| 46 | S&F 125mm long Brass handles, cast type, polished bright complete all as directed. |
| 47 | S&F 200mm long Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and directed. |
| 48 | S&F in repair Door stopper of stainless steel body and tongue, with hard drawn steel spring and rubber bush, on bottom rail of door complete all as specified |
| 49 | S&F in repair Aluminium body door closer hydraulically regulated designation no 3 universal type, (ISI Marked), suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80Kg complete all as specified |
| 50 | S&Fin repair Double action spring hinges 125mm size, mild steel with steel wire spring, stove enamelled, black complete all as specified |
| 51 | S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tacks, galvanized wire of staples complete all as specified |
| 52 | Dismantling Wall and ceiling boards (steel, fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any type, any thickness, including cover fillets complete all as specified |
| 53 | Supply & fixed stainless steel sheet 1mm thick , Gde 304, fixed with stainless steel screws with washer and welding to SS angles in wall cladding complete all as specified |
| 54 | Supply & fixed stainless steel Angle 50mm x 50mm x 4mm thick, Gde 304, fixed with stainless steel screws and necessary welding at corner of wall & pillars or similar places as a protection to wall / tiles damage from movement of food trolly complete all as specified |
| 55 | Dismantling boarding, any description fixed in any position fixed with screws complete |
| 56 | Providing and Fixing factory made 18/19 mm solid WPC (wood polymer composite) with glossy finish laminated board of required size comprising of virgin PVC resin of K Value 57-60 (Suspension Grade), Calcium carbonate and natural fibers (wood powders/rice husk/wheat husk) and non toxic additives, made from extrusion process WPC foam sheet single extruded(inner) with having minimum density not less than 650 kg/cbm, having good screw holding capacity (Screw withdrawal strength of 2000N (face) & 1100 N (edge), minimum commissive of 50 N/mm2 , Modules of elasticity 850 N/mm2 and resistance of spread of flame of Class A category with property of being Termite/Borer free. water/Moisture proof and fire retardant to be laminated with PVC foil of minimum 14 microns thick of approved design pasted on both sides of shutter and fixing stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as direction of Engr-in-charge, Material test certificate and authentication should be compulsory provide by the manufacturing company for Kitchen cabinets. |
| 57 | S&F 6 mm thick one side prelaminated decorative WPC sheet and other side plain in cupboard & like items inclusive of solvent cement & fixing at site complete all as specified and directed.. |
| 58 | S&F Modular auto concealed soft closed hinges 35mm 110 degree size complete all as specified |
| 59 | S&F 150mm long designer/modular Brass handles (fancy type), cast type, polished bright complete all as specified |
| 60 | S&F PVC tape 18mm wide with adhesive as in lipping to boarding complete all as specified |
| 61 | S&F for Telescopic drawer channel rollers for shelves of size 300mm long complete stainless steel of grade 304 complete all as specified |
| 62 | S&F for Telescopic drawer channel rollers for shelves of size 500mm long complete stainless steel of grade 304 complete all as specified |
| 63 | M&L for 18mm thick designer WPC Jalli exterior grade of design, shape and colour as approved by Engineer in charge conforming to IS 2380 incl necessary fitting fixed to wall or pole/trusses complete all as specified and directed. |
| 64 | Taking up or down steel water tubing and connections of 25mm dia complete all as specified |
| 65 | Supplying and laying of 25mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including necessary CPVC fittings and /or brass ferrule for fixing with existing cPVC/iron pipe as required on site complete all as specified |
| 66 | Supplying and laying of CPVC pipes 20mm dia bore, SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including necessary cPVC fittings and /or brass ferrule for fixing with existing cPVC/iron pipe as reqd on site also including taking up or down existing tubing pipe of any description, complete all as specified |
| 67 | Supplying and laying of CPVC pipes 32mm dia bore, SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including necessary cPVC fittings and /or brass ferrule for fixing with existing cPVC/iron pipe as reqd on site also including taking up or down existing tubing pipe of any description,complete all as specified |
| 68 | S&F in repair vitreous china wash down water closet pan (padestal pattern), white including plastic water closet seat cover, white, closed pattern flat bottom and mild steel chromium plated or aluminised hinging device complete all as specified. |
| 69 | S&F in repair PVC low level flushing cistern 10 Ltr capacity symphonic action type white including ball valve, float valve and handle including bracket and PVC flush pipe, complete all as specified |
| 70 | S&F in repairs vitreous china wash basin white, flat back, size 550x400mm including waste coupling brass CP 32mm bore, and 02 Nos CI brackets complete all as specified |
| 71 | S&F in repair wash hand basin Counter Top , white, flat back, (size 550 x 450 x 200mm) , including cutting and or all as specified and directed. (Including 15mm bore CP pillar tap, waste coupling and 32mm dia PVC waste pipe) complete all as specified |
| 72 | S&F in repairs 2-in-1 Wall Mixer with provision for overhead shower with 115mm long bend pipe on upper side, connecting legs & wall flanges complete all as specified |
| 73 | S&F in repairs brass chromium plated shower rose of size 125 mm with 24'' Long arms including fixing to steel pipe. |
| 74 | S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified |
| 75 | S&F stainless steel soap dispenser including fittings fixed to wall complete all as specified |
| 76 | S&F in repair fancy type angle valves, chromium plated alloy screwed down high presure, screwed both ends for iron pipe or for unions of 15 mm dia long sunk complete all as specified |
| 77 | S&F in repair towel rails of 20mm dia tubular brass chromium plated 60cm long 'D' type fixed to all complete all as specified |
| 78 | Supply & fixed, in repair, PVC connections 15mm size with brass/ PVC nut both side of length 450mm complete all as specified |
| 79 | Supply & fixed, in repair, PVC connections 15mm size with brass/ PVC nut both side of length 600mm complete all as specified |
| 80 | S&F 6mm thick bevel-edged, fixed with stud- type looking mirror of size 2600x650mm , made from selected glass quality, with an minimalist frame with an antique finish, securly mounted to the wall ,complete all as specified |
| 81 | S&F 6mm thick bevel-edged, fixed with stud- type looking mirror of size 900x450mm, made from selected glass quality, with an minimalist frame with an antique finish, securly mounted to the wall, complete all as specified and as directed.. |
| 82 | S&F, 100/ 125mm dia chromium plated grating with/ without central hole fixed in repair complete all as directed. |
| 83 | S&F CP Bottle Trap with Fully Casted Body 32 mm with 190 mm and 125 mm Long Connecting Pipes & Wall Flange fixed in repair complete all as specified |
| 84 | S&F in repair 15mm bore fancy type bib tap chromium plated (Long body) with wall flange and aerator complete all as specified |
| 85 | S & F in repairs brass CP sink mixer with regular swinging spout (wall mounted model) with connecting legs and wall flanges water screwed down for iron pipe 15 mm bore and fixed complete all as specified . |
| 86 | S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls with PVC brackets complete all as specified |
| 87 | S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including taking down existing pipes complete all as specified |
| 88 | S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in floor or trenches including taking down existing pipes complete all as specified |
| 89 | S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in floor or trenches including taking down existing pipes complete all as specified |
| 90 | S&F PVC (SWR) bend 110mm bore dia including jointing with solvent cement complete all as specified |
| 91 | S&F PVC (SWR) junction single, (Single T) equal or unequal 110mm bore dia including jointing with solvent cement complete all as specified |
| 92 | S&F PVC (SWR) 'P’ trap 110mm bore dia including jointing with solvent cement complete all as specified |
| 93 | S&F 100mm PVC (SWR) floor trap/ nahni, plain with grating including jointing with solvent cement complete all as specified |
| 94 | S & F for 100 cast iron sanitary conncetion for WC complete all as specified. |
| 95 | Dismantling water tanks and removing to store Exc 250 but not Exc 500 Litres capacity, complete all as directed. |
| 96 | S&F Rotational moulded polyethylene water storage tanks of 2000 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc complete all as specified |
| 97 | S&F in repairs Ball valve 25mm dia high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball min weight 210 gms fixed complete all as specified |
| 98 | S&F in repairs Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe 25 mm bore complete all as specified |
| 99 | S&F CPVC Tank Nipple/connector of size 32mm suitable for HDPE water tank complete all as specified |
| 100 | M&L for Mosaic tiles of any size/colour/pattern as approved by Engr-in-Charge, Glass mosiac tile to be fixed over 5mm thick 325 MYK Laticrete adhesive laid with 2 mm spacers and filling joints with MYK Laticrete Grout pressed with rubber trowel to remove excess grout with damp spongs and subsequently with dry rag complete, including dismantling of existing floor / Wall tiling including cement mortar bedding and rubbish off the premises complete all as specified |
| 101 | S&F Pre- painted galvalume aluminum zinc coating GI based crimped curved corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified all as spd and as directed by Engr-in-Charge |
| 102 | M & L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified |
| 103 | M&L 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and as directed. |
| 104 | M & L for Solid PVC Wall Lining/Panelling /louvers consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and as directed. |
| 105 | Providing and fixing of Navair make or equivalent Metal door of size of 2.0 to 2.52 Sqm for kitchen from ISO 9001:2015 certified Manufacturer. The door must have been manufactured with galvanised - GI sheet of GPSP Grade as per IS 277. All Fire doors must satisfy the requirement for 120 minutes Fire Rating with its Stability & Integrity for 120 minutes. The Prototype sample of the door must carry a prior test evidence as per IS 3614 part-2 / BS 476 Part 20 & 22 . The door must carry a Batch sticker with details of the door after scanning . All doors should be finished with Powder coating in desired regular RAL Shades. Door frame shall be double rebate Navair make of section 100x57 mm made out of 1.20mm thick galvanised steel sheet. Frames should be butt jointed and field assembled with bolting system for proper strength. Frames should be provided with back plate for anchor fasteners for installation on a finished plastered wall opening. Any filling in frames is not suggested. In case cement / concrete filling is required the same will be done by concerned civil contractor. Door leaf should be 46mm thick Navair make fully flush double skin door. Door leaf must be manufactured from 0.80mm thick galvanised steel sheet. The door should be provided with reinforcement pads & necessary provision for receiving appropriate Hardwares of approved make. The Shutter shall be filled with proprietary infill material insulation . For Double leaf doors will have astragal at their meeting stile for both active and inactive leaf, including all hardwares , Fasteners and FR Glass and necessary fittings. The door and the frames shall be finished with powder coating. |
| 106 | M&L for 25mm thick plain cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) in floors complete all as specified |
| 107 | M&L for Digital coloured Industrial parking tiles of size 300x300x10mm thick in floors laid over 15mm thick screed bed in CM 1:6 etc set and jointed with epoxy grout Ardex Endura as per manufacturer instruction complete all as specified. ((Make: Jhonson, Orient, Kajarai) |
| 108 | Demolition of brick tiles or terracing tiles, single layer on roofs including cement screed in roof complete all as specified |
| 109 | Demolition of mud phuska in roofs any thickness including plastering and leeping (whether full thicknessremoved or only a part thereof) all as specified and directed. |
| 110 | Removing soil excavated material exc. 1.5Km but n exc 5km and depositing where directed at above the starting point all as specified and directed. |
| 111 | M&L for cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry (1:3) complete all as specified and directed. |
| 112 | M&L for rendering 10mm thick plastering on fair faces of concrete surface in CM 1:6 with water proofing compound @ 0.2% by weight of cement finished even and smooth without using extra cement complete all as specified and directed.Note:- Liquid water proofing compound shall be measured and paid separately. |
| 113 | M&L for for water proofing treatment to RCC roof slab including parapet as under :(a) Applying bituminious primer conforming IS 3384 1965 @ 0.50 Kg/Sqm over cleaned and dry roof surface incl parapet. (b) APP based polymeric water proofing membrane minimum weighing 3Kg/ Sqm minimum 3 m thick reinforced with polyster non-woven fabric (weight not less than 150 gms/Sqm) laid over primed roof surfaces by forced application and vertical surfaces up to grooves and width of overlap 75mm at the sides and 100mm in ends and applying a coat of hot blown bitumen 85/25 at the rate of 1.20 Kg per Sqm over APP membrane complete all as specified and as directed. |
| 114 | M&L for providing, cement concrete type B-1 (1:2:4) using 20mm graded stone aggregate as in roof kerbs, padding or mud stops, rounded or chamfered on edges all as specified and directed |
| 115 | Supply and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance> 0.75 on waterproof and sloped surface of terrace, laid on 15 mm thick cement sand mortar in the ratio of 1:6 (1 cement : 6 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts if reqd as per manufacturer's instructions, including providing skirting upto 150 mm height along the parapet walls in the same manner complete all as specified and directed. Make:- Nitco, Hindustan tiles, Ultra tiles, Duracrete. |
| 116 | Providing and fixing 12.5mm thick plain Gypsum board conforming to IS: 2095 (Part-I) :2011 in false ceiling to flat or curved surfaces as per manufacturer's instructions and as per design approved by Engr-in-Charge over GI frame work grid of section 80 x26x30x0.5mm, perimeter channel 20x28x30x0.5mm, intermediate channel 15x45x15x0.9mm, ceiling angle 25x10x0.5mm, connecting clip, soffit cleat necessary rawl plug screws, including filling the gaps with POP & painting the same with two coat Acryllic Emulsion paint over one coat of primer of approved colour and texture as per instruction of Engr-in-Charge. |
| 117 | M&L for Designer Glazed coloured ceramic tiles of size 300 x 600mm as per direction of Engr-in-Charge laid in required pattern vertical surface set and jointed in neat 10 mm thick CM (1:4) on wall. Tiles shall be free of any variation in colour or texture, and laying plastic sheet cover on wall/flooring and removing when directed including dismantling of existing wall tiling. Make : Somany, Kajaria & Orient. |
| 118 | S&F in repair Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified |
| 119 | M & L for Providing and injecting chemical chlorpyriphos emulsifiable concentrate for Post Constructional Anti termite Treatment Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified |
| 120 | M & L for Anti termite Treatment of soil under existing floors using chemical chlorpyriphos emulsifiable concentrate @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 to match the existing floors complete all as specified |
| 121 | Providing and laying 10mm thick Mirror finish super-premium range, digital and high gloss Vitrified Tiles of approved reputed makes of size n.exc. 1.0 Sqm laid in required pattern on 20mm thk screed bed of CM (1:6) including neat white cement float, filling joints with neat cement slurry, of appropriate colour, curing and cleaning complete. Tiles shall be free of any variation in colour or texture, including dismantling of existing floor tiles complete all as specified and directed. |
| 122 | Providing, supplying and fixing Single Bowl Industrial Sink made of 18 gauge (1.2 mm thick) stainless steel (SS304 grade) with one deep pressed bowl of size 400 mm (length) × 400mm (width) × 1250 mm (depth), Sink to be provided with 150 mm high backsplash, integrated drain outlet with stainless steel strainer, and necessary supports/bracing for rigidity. All welds shall be ground smooth and polished to a satin/matt finish. The unit shall be installed complete with all plumbing connections, waste fittings, union couplings, and accessories as directed by the Engineer-in-Charge. |
| 123 | S&F TMT bars 10mm dia and over cut to length, bent to shape required, incl cranking, beinding spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified |
| 124 | M & L for providing RCC (type B1 1:2:4) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like chajjas complete all as specified |
| 125 | Formwork to soffits of suspended slabs rough finished such as roof slabs, flor slabs, landings and similar work not exceeding 200 mm thick complete all as specified |
| 126 | SPECIAL REPAIRS TO ROOF TREATMENT (NOTE : Works to be carried out in roof top of 8th floor)Taking down cement plaster incl raking out joints, hacking for key, scrubbing down with water incl rubbish off the demolished material out of Mod land complete all as specified and directed |
| 127 | M&L for providing cement concrete type B-0 (1:2:4) using 12.5mm graded stone aggregate as in roof, kerbs, padding or mud stops, rounded or chamfered on edges all as specified |
| 128 | M&L for cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting and filling with sika cracksil or Dr fixing 201 crack x paste or smart case crack seal as per manufacherer instruction complete all as specified and directed. |
| 129 | M&L for rendering 10mm thick on fair faces of concrete surface in CM 1:4 with water proofing compound @ 2% by weight of cement even and smooth (without using extra lime or cement) complete all as specified and directed.Note:- water proofing compound shall be measured and paid separately. |
| 130 | M&L for water proofing treatment to RCC roof slab incl parapet as under (a) Applying bituminious primer conforming IS 3384 1965 @ 0.50 Kg/Sqm over cleaned and dry roof surface incl parapet. (b) APP based polymeric water proofing membrane minimum weighing 3Kg/ Sqm minimum 3 mm thick reinforced with polyster non-woven fabric (weight not less than 150 gms/Sqm) laid over primed roof surfaces by forced application and vertical surfaces up to grooves and width of overlap 75mm at the sides and 100mm in ends and tucked into chases on vertical surfaces applying coat of hot blown bitumen 85/25 at the rate of 1.60 Kg per Sqm over APP membrane complete all as specified and as directed. |
| 131 | M & L for two coats of solar reflective bituminous aluminium paint @0.1kg/sqm complete all as specified |
| 132 | Supply and fixing heat resistant terrace tiles (300 mm x 300 mm x 20 mm) and skirting with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance> 0.75 on waterproof and sloped surface of terrace, laid on 25 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, any clour or colured all as specified and directed. |
| 133 | Disconnecting existing tanks for repair, Cleaning and removing all scale and dirt, etc from tanks and from mouths of circulating pipes, 5000Ltr capacity including washing with bleaching powder and reconnecting cleaned tank complete all as specified |
| 134 | Disconnecting existing tanks exc 500 ltrs and not exc 1000 ltrs, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position after cleaning and removing all scale and dirt from tanks and from mouths of circulating pipes etc |
| 135 | S&F in repair ball brass valves, high pressure, with polythene float and fly nut, screwed for iron pipe or brass ferrule 20 mm bore complete all as specified |
| 136 | Taking up or down 80 mm dia GI Tubing and connections including cleaning for refixing or removal to store complete all as specified. |
| 137 | S&F 80mm bore GI tubing med grade galvanised with all fittings and fixed to walls & floors etc complete all as specified |
| 138 | M&L for rendering 5mm thick cement plaster in CM 1:3 on ceiling or RCC tank surfaces including finished even and smooth without using extra cement complete all as specified |
| 139 | S&F in repair 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed on walls/floor (including Elbow, Tee, Socket, Reducer, Bushing, Step over bends, End cap, End Plugs etc),Note:- Work has to be carried out upto 8th storey. Rate quoted is deemed to be inclusive of the same and nothing extra shall be paid on this account. |
| 140 | M&L for PCC 1:2:4 type B-0, (using 12.5 mm graded aggregate) as in coping including all necessary form work complete all as specified |
| 141 | Dismantling structural steel work including doors, gates, stair etc |
| 142 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes,channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories &stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement. |
| 143 | M&L for preparation of newly plaster surface of wall / Ceiling surface applying two coats of weather proofing exterior acrylic emulsion paint by spray gun/ spray machine incl one coat of primer all as directed by Engr- in-charge.Note :- 1. Stage for prepration of surfaces shall be got approved from GE before applying the finishes.2. Material shall be procured from manufacturer and work shall be got executed through authorised applicator. |
| 144 | S&F for Rotational moulded polythylene 500 liters capacity water storage tank (Cylindrical vertical with closed top), 3 layer hoisted and fixed in position including 25 mm ball valve high pressure of PTMT with epoxy coated alu rod & high density plastic ball complete all as specified |
| 145 | Dismantling water storage tanks of any description/ exc 500 liters capacity and n exc 1000 ltr capacity removing from site complete all as specified. |
| 146 | E & M PORTION: Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. |
| 147 | Taking down carefully submain wiring with aluminum conductor cable of any size in PVC conduit/casing caping complete removing the materials and taken as credit and making good the disturbed surface of wall / floor etc. |
| 148 | Taking down carefully by unscrewing from boards/ outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators, etc. and taken as credit and making good the disturbed surface of wall / floor etc. |
| 149 | Taking down DBs any type, any way, TPN,SPN including MCBs SP/SPN/ MCCB complete all as specified and directed. Please Enable Macros to View BoQ information |
| 150 | Taking down DBs any type, any way, TPN,SPN including MCBs SP/SPN/ MCCB complete all as specified and directed. Please Enable Macros to View BoQ information |
