Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | M&L for non skid ceremic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of mortar 15mm thick in cement mortar 1:6 and also including dismantling of existing tiles any description and demolition of plain concrete base n. exc 40mm thick all as specified and directed. |
| 2 | M&L for non skid ceremic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed epoxy tile joint filling using approved manufacturer on floor tiles over and including screed bed or bedding layer of mortar 15mm thick in cement mortar 1:6 and also including dismantling of tiles any description and PCC flooring not exceeding 40mm thick all as specified and directed. Note: Epoxy tile joint filling shall be paid seprately. |
| 3 | M&L for epoxy tile joint filling item No 2 using approved manufacturer on floor. All complete as per the manufactures instructions |
| 4 | M&L for ceremic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering on wall surfcae in cement mortar 1:4 and also including dismantling of tiles any description all as specified and directed. |
| 5 | M&L for glazed ( plain /coloured) ceramic tiles wall 350x 250x 7 mm/ 450X 350X 7mm thick on vertical faces of walls including 10mm thick in CM 1:4 set jointed in neat cement slurry and pointed in coloured cement to match including dismantling wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises dado complete all as specified and directed. |
| 6 | M&L for 18 - 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and urinal partition and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including demolition of existing granite slab etc all as specified and as directed. |
| 7 | M&L for rounding to edges of stone slabs one edge ,such as in steps ,cooking platform and other similar situations complete all as specified and as directed |
| 8 | M&L for 15-18 mm thick machine cut kota stone slab flooring and jointed with grey cement slurry fixed with pigment to match to shade of the slab including rubbing and mirror polishing over and including 20 mm thick bedding layer of cement mortar 1:6 for laying floor finishes even and rough with and including dismantling floor, hearth or wall kota stone slab including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed. |
| 9 | M&L for machine cut Kota stone slab 18 to 20mm thick in riser of steps skirting, dado and pillar,landing in single piece with round nosing with three numbers of serration, laid over cement screed and jointed with grey cement slurry mixed with pigment to match including rubbing & mirror polishing ding and inclucding 10mm thick cement plaster on brick surfaces or concrete surface in cm (1:4) finished even and rough as screed dismantling of wall tile including cement mortar bedding complete all as specified and directed |
| 10 | Demolition of roof terracing cement / brick concrete (un-reinforced) and existing water proofing treatment of any thickness in any position and of any portion from top of roof of building, cleaning surface of roof with wire brush / mechanical brush and with water thoroughly to remove all dust / dirt and loose particles to expose base concrete roof slab and removal of rubbish / demolished material out of MD land complete all as specified. |
| 11 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove complete all as specified and directed. |
| 12 | M&L for PCC 1:2:4 Type B0 using 12.5 mm graded aggregate as in levelling course, haunching, coping and similar works of over RCC roof surface including rounded or chamferred on edges etc all as specified and directed. |
| 13 | Supply only liquid waterproofing compound complete all as specified and directed . |
| 14 | M&L for 25mm thick plain cement concrete 1:2:4, type B1 using 20mm graded stone aggregate in floor finishes even and fair to receive floor tiles complete all as specified and directed. |
| 15 | M&L for 10mm thick redering on fair faces of concrete surfaces in CM 1:4 with water proofing compound @ 200ml per 50 Kg of cement and including taking down existing plastering any description complete all as specified and directed.NOTE:- WPC shall be measured and paid separatly |
| 16 | M&L for Prepartion of RCC roof surface and applying one coat of polymeric modified bitumen 85/25 @ 1.2 Kg/Sqm over a coat of polymeric primer @ 0.30 Kg/Sqm including cleaning surface, all as per manufacture's specification complete all as specified and directed. |
| 17 | Supply and providing water proofing treatment with polymeric standard water proofing membrane, 4 mm thick, Aquaflex manufactured by M/s Bengal Bitumen, MULTIPLAS STANDARD, manufactured by STP TEXAS Ltd/Hyperplas manufactured by IWL Ltd having 10 years guarantee for water tightness all as specified and directed and described as under :- (a) Supply & providing water proofing treatment with polymeric proofing membrane of 3Kg/Sqm, 4mm thick, HYPERPLAS STANDARD/MULTIPLAS STANDARD consting of 100micron HMHDPE film centre core including coating the surface with the bitumen 85/25 @ 1.20 Kg/Sqm and torch application of membrane with 10cm overlaps and longitudinal edges 15 cm at the ends and cutting grooves in wall for inserting tar felt if required complete job as per requirement as required thereof, complete all as specified & directed. |
| 18 | M&L for Providing and laying pressed “cool roof / heat-resistant” tiles of approved quality and size ( 20–25 mm thick & 300×300 mm or as specified) on roof surface laid over & including cement mortar screed 15mm thick in CM 1:6 mixed with water proofing compound and jointed pointed in CM 1:3 mixed with 5% crude oil by weight of cement . The work includes cleaning the existing roof surface, maintaining proper slope for drainage, joint filling with white cement mixed with suitable pigment, finishing the surface smooth, curing for the required period, complete all as specified and as directed. |
| 19 | M & L for cutting chases of hanging chajjas, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of sunshades, shelves, lintels, Chajja etc making good, cutting out exc 10cm and not exc 40cm girth in RCC chajjas in brick walls complete and including necessary scaffolding or Jhula upto 4th floor complete all as specified and directed.all as specified and as directed. |
| 20 | Taking down chowkats with shutters not exc 1.5 Sq.m each including making good disturbed portions of wall with new or old bricks, lintel,cills, etc in CM 1:4 complete all as specified and directed. |
| 21 | Taking down chowkats with shutters exc 1.5 Sq.m each and not exc. 4.00 Sq.m including making good disturbed portions of wall with new or old bricks, lintel,cills, etc in CM 1:4 complete all as specified and directed. |
| 22 | Cutting holes in brick wall built in CM for inserting holdfast and making dismantled portion in CM 1:3 or cement concrete 1:2:4 type B1 . Depth of embedded portion of hold fast or lugs measured from the face of the jamb into the wall exc half brick but n.exc one brick complete all as specified and directed |
| 23 | S&F powder coated anodised aluminium window and ventilator shutters, fixed type/ open type/sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws anodised aluminium fittings such as peg stays 150 mm long . complete all as specified. (2 No) hinges type B-21 100mm long (2 Nos) suitable handle 1 (No) complete all as specified. NOTE - The unit rate quoted by contractor excludes cost of glass, Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm |
| 24 | S&F powder coated anodised 10 mm dia hexagonal (decogrill) grill fixed to window/ventilator frame with aluminium beading complete all as specified Make : JINDAL or equivalent section from HINDALCO/ INDAN A1 COMPANY. |
| 25 | S&F powder coated anodised aluminium frame windows, ventilators with one or more rebates including joining cleat for fixing etc. complete (Sliding type/Side hung type). |
| 26 | S &F Sheet glasses, plain 4 thick glazing all with aluminium beading & rubber gaskets etc exc 0.50 Sqm in each pane fixed in aluminium window ventilator complete all as specified and directed. |
| 27 | S &F Sheet glasses, plain 4 thick glazing all with aluminium beading & rubber gaskets etc not. exc 0.50 Sqm in each pane fixed in aluminium window ventilator complete all as specified and directed. |
| 28 | S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples including any type of door/window/Ventilaotr (Wooden/PVC/Aluminium) and including new beading/rubber beading if required, including scaffolding for height upto G+3 building complete all as specified. |
| 29 | S & F solid PVC door frames of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube all as specified or as directed. |
| 30 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width strucks inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either to side and as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site as specified of drawing. |
| 31 | S&F factory made PVC Cupboard frame of the size 75mm x 40mm with a wall thickness of 5mm, made out of extruded 5mm thick plain/prelam PVC sheet of density 600 kg/cbm, having bottom width of 50mm and thickness of 10mm. All four frame lengths reinforced with 15 mm x 15mm M. S. square tubes of 19 gauge thickness throughout the frame and mitre cut at two corners adjointed with 2 nos. of 15mm long brackets 0f 10mm x10mm M S square tubes. The door frame shall be fixed to the wall using 8/100 long M S screws through the frame by using PVC fasteners. A minimum of 4 nos. of screws to be provided for each vertical member and minimum of 2nos. of screws to be provided horizontal member etc. complete as per direction of Engr-in-Charge, manufacturer's specification and drawing.( Material will be of Rajshree/ Sintex/ Cactus and will be fabricated through authorised fabricators of the approved firm). |
| 32 | S&F factory made PVC cupboard flush type shutter (to form double leaf door) of 30mm thick consisting of frame made out M S tubes of 19 gauge thickness and size 19mm x 19mm for stiles and rails. The inside panel shall consist of 20 mm thick multichamber hollow PVC section of 1mm wall thickness, bonded using solvent cement/ cynoacrylate adhesive with 5mm thick plain/prelam PVC sheet, on both side of inside panel incliding necessary items to fix the shuter to frame such as 100mm stailess steel hinges, 100 mm long handles made of anodised aluminium and magnetic ball catch for each pair of shutter.All four edges of the panel to be sealed with lipping of 10mm thick and 20mm wide PVC sheet baton (made by sticking 2nos. PVC foam sheet of 5mm thickness using PVC solvent cement adhesive). complete as per direction of Engr-in-Charge.( Material will be of Rajshree/ Sintex/ Cactus and will be fabricated through authorised fabricators of the approved firm) |
| 33 | S & F in repair of 20 mm thick 2nd class hard wood boarding planed both side with butt joints and fixed with nails as in shelves; partitions, and shelves of built-in cupboards, almirahs, book cases, toilet boxes; racks, pelmets and similar work. (except flooring and skirting) complete all as specified and directed. |
| 34 | S&F Harrison rails, mild steel, chromium plated with fixing with PVC brackets stops rollers etc all as specified and as directed. |
| 35 | S&F for 100mm long stainless steel butt hinges for PVC door complete all as specified and directed. |
| 36 | S&F for 150mm long aluminum anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 37 | S&F for 150mm long aluminum handles, cast type complete all as specified and directed |
| 38 | M& L for 125 mm long Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and directed |
| 39 | S&F125x60mmx2mm thick pressed steel, frames for door with one or more rebates including necessary fixing lugs, hinges,lock strike plate, etc, complete all as specified and directed |
| 40 | S&F105x60mmx2mm thick pressed steel, frames for door with one or more rebates including necessary fixing lugs, hinges,lock strike plate, etc, complete all as specified and directed |
| 41 | S&F 30 mm thick flush shutter, solid core construction with block board core and ply wood face panels, commercial type on both side, complete all as specified & directed. |
| 42 | M & L for 35mm thick 2nd class hard wood plain framed glazed and skeleton shutter open rebated & prepared to receive glass, gauge etc, without sash bar edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass etc, of members of shutters as specified in SSR Part - I Section 8 clause 8.24 (a) supplied and fitted to chowkats all as specified and directed. |
| 43 | M&L for new painting to wood and wood based surfaces of any description exc 10cm with or girth with two coats of synthetic enamel paint over a coat of pink primer including preparation of new or previously untreated surface all as specified and directed |
| 44 | M&L for preparation of old painted steel surfaces of any description and applying one coat of synthetic enamel paint complete all as specified and directed |
| 45 | S&F 100mm size butt hinges, medium weight cold rolled mild steel complete all as specified and directed |
| 46 | S&F 300mm long mild steel sliding door bolts plate type stove enameled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed |
| 47 | S&F sheet glass 3mm thick ordinary quality and glazing with oil putty in square exc 0.5 Sqm each pane complete all as specified and directed |
| 48 | S&F sheet figured glass 3mm thick ordinary quality and glazing with oil putty in square exc 0.5 Sqm each pane complete all as specified and directed |
| 49 | S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanesed wire stapels complete all as specifed and directed. |
| 50 | S&F for 0.71mm thick Aluminium plain sheeting Alloy 31000 H4, STUCCO Embossed finish with fixed with coach screw and Aluminium washer in roof and wall etc. with end laps stitched with 25x6mm G.I. bolts at 20cm apart incl dismantled also complete all as specified and directed |
| 51 | S & F 300 mm size, MS ordinary rat tail rod pattern springs including roller and roller plate complete including fixed to wooden and steel chowkats in repairs complete all as specified and directed. |
| 52 | S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor 150 mm length complete all as specified and directed. |
| 53 | S&F in repairs stainless steel kitchen sink with drainage board of overall size 495x420mm and bowl size 410x330x160mm with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe complete all as directed. |
| 54 | S&F stainless steel grating fixed in repairs complete all as specified and directed |
| 55 | S & F stainless steel plate rack not less than 5 Kg of size in repair complete all as specified and as dirrected Make : KPR -315 of M/S Blue Star or equivalent in M/S Jain Brothers sanitation Pvt Ltd Brand -Jayna |
| 56 | S&F in repair 15 mm dia brass chromium plated pillar tap, fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut, capstan head, screwed for 15mm dia pipe complete all as specified and directed |
| 57 | S&F in repairs Vitreous China wash basin, oval shape,white, size 550x400mm, excluding, waste, chain and plug and porcelain stopper,but including long nack fancy type pilar tap, brackets complete including 32mm bore waste coupling of PTMT (half or full threaded) (Minimum weight 45gms) and waste pipe all as directed. |
| 58 | S & F in repair chromium plated shower rose with or without swivel joints, any size, including fixing to steel pipe or union size 125 mm complete all as specified or as directed. |
| 59 | S& F in repair Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed to bore 15mm two in one type (suitable to supply water for shower) complete all as specified and directed |
| 60 | Rounding to edges of stone slabs one edge , such as in steps , cooking platform , and other similar situations complete all as specified and directed |
| 61 | Demolition of cement concrete (unrinforced), in any position and paving n.exc. 15 cm thickness( below or above ground level) complete all as specified and directed. |
| 62 | M & L for plain cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregate) as in plinth protection 75 mm thick finished even and fair or as specified or as directed. |
| 63 | M&L for anti-termite treatment, at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as per specified and as directed. |
| 64 | M&L for anti-termite treatement treating the soil under the plinth protection at the rate of 5 litre of emulsion per square metre of surface area complete all as per specified and as directed. |
| 65 | M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; al as directed. |
| 66 | M&L for providing cement concrete 1:2:4 type B1, using 20 mm graded stone aggregate as in benching, coping, bed blocks including necessary form work, weathering slightly rounded or chamfered angles and throating, complete all as specified and directed. |
| 67 | S&F for 5.5mm thick looking mirror of selected quality, beveled edge 450mmx600mm glass mounted on 6mm thick AC building board and fixed to wooden plug with chromium plated brass screw and cup washer fixed in repair including 5.5mm thick glass self of 12cm wide with guard railing of 600mm long complete all as specified and directedMake of Mirror : Atul/Golden Fish/Modiguard. |
| 68 | S&F in repairs tubular, towel rail aluminium anodised 20mm dia D type 60 cm long between flanges complete all as specified and directed |
| 69 | S/F low density polyethene pipes (LDPE) 32mm of pressure rating 6 Kg/cm2 fixed to walls complete all as specified and directed. |
| 70 | S&F Stainless steel Curtain Rod 32 mm dia of approved quality with two number decorative design as approved brackets fixed in brick/concrete wall and same finished knobs on each end of curtain rod complete all as specified and directed |
| 71 | M&L for Peg set of six Aluminium alloy body complete all as specifed and directed. |
| 72 | S&F Anodised aluminium frame for doors windows, ventilators and kitchen cupboards frame with one or more rebates including joining cleat for fixing etc. complete all as specified add for powder coating (minimum thickness of powder coating 50 micron) |
| 73 | M&L for Stainless steel floor trap Anti cock roach proof Trap complete all as specified and directed |
| 74 | S&F in repair vitreous china water closet (squatt pan) orissa pattern 580x 440 mm size pan white with front or back inlet with integral foot rests including provn of lime concrete bedding including connections to flushing cistern/pipe complete all as specified and directed. |
| 75 | S&F in repair vitreous china wash down water closet pan 580 x 440 mm (Pedestal pattern) white complete including seat cover, flush pipe including all joints, complete all as per specified and as directed. |
| 76 | S&F in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified |
| 77 | S&F in repair Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed. |
| 78 | S&F in repair 10 ltrs capacity (PVC), valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed. |
| 79 | S&F in repair stop valve/angle cock two/one way 15mm dia, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or union and fixed all as specified or as directed. . |
| 80 | S&F in repairs chromium plated fancy type concealed stop cock for 15 mm bore pipe complete all as specified and directed. |
| 81 | S&F in repairs chromium plated fancy type long body bib taps with cast copper alloy screwed down, screwed for iron pipe or for brass ferrule for 15 mm bore pipe complete all as specified and directed. |
| 82 | S&F in repairs 450mm long PVC connection 15mm bore with PTMT nuts complete all as specified and directed. |
| 83 | S&F PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed. |
| 84 | S&F in repairs fancy Bib tap 15mm dia cast copper alloy chromium plated with crutch or buter fly handle screwed down (Pressed for iron pipe) fixed in repairs complete all as specified and directed |
| 85 | S&F in repair Soap dish, chromium plated any type, fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 86 | S&F in repars Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified. |
| 87 | S&F of 500 ltrs Rotational moulded polyethylene water storage tanks including dismantling of water tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, including 20mm Bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and suitable nipple joint for both inlet and oulet. ( Minimum weight 15mm-142 gms/ 20 mm - 210 gms. / 25mm - 455 gms/ 40mm - 690 gms) fixed complete all as specified. |
| 88 | S&F of 1000 ltrs Rotational moulded polyethylene water storage tanks including dismantling of water tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, including 25mm Bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and suitable nipple joint for both inlet and oulet. ( Minimum weight 15mm-142 gms/ 20 mm - 210 gms. / 25mm - 455 gms/ 40mm - 690 gms) fixed complete all as specified. |
| 89 | M&L for disconnection existing tanks,Exc 500 & n exc1000 setting aside (or lowering if required) for repairs, cleaning,etc and hoisting if required reconnection and re-fixing in position. (cleaning repairing, etc measured separately) |
| 90 | S&F in repair 20 mm dia ball valve, PTMT high pressure of epoxy coated Aluminium rod and high density plastic ball (200 gms), screwed for iron pipes or brasas ferrule, complete all as per specified and as directed |
| 91 | Taking down cement plaster from wall / ceiling of any description including terrazzo skirting/dado on brick or stone walls etc including raking out joints, hacking for key and scrubbing down with water etc.all as specified and directed. |
| 92 | M&L for 15mm thick cement plaster on brick surfaces or concrete surfaces in cm (1:4) including finishing the surface even and smooth without using extra cement and including necessary scaffolding complete all as specified and directed. |
| 93 | M&L for 15mm thick cement plaster on brick surfaces or concrete surfaces in cm (1:6) including finishing the surface even and smooth without using extra cement and necessary scaffolding complete all as specified and directed |
| 94 | M & L for rendering 10 mm thick on ceiling or concrete surfaces in cement mortar (1:3) finished the surface even and smooth without using extra cemen tand necessary scaffolding complete all as specified and directed |
| 95 | M&L for white washing three coats to wall surfaces including preparation of newly plastered untreated surfaces and necessary scaffolding complete all as specified and directed |
| 96 | M&L for white washing three coats to ceiling surfaces including preparation of newly plastered untreated surfaces and necessary scaffolding complete all as specified and directed |
| 97 | M&L for Complete removal of existing treatment from wall/ ceiling surfaces and rubbing down with sand paper to have even and smooth surfaces complete all as specified and directed |
| 98 | M&L for applying 3 mm thick layer of wall care putty on wall/ceiling surfaces incl rubbing down the surfaces with sand paper after getting dried all as directed to obtain a smooth & even surface complete all as specified and directed |
| 99 | M&L for Preparation of old decorated surfaces and applying one coat of white wash on ceilings complete all as specified and directed |
| 100 | M & L for applying one coat of distemper oil emulsion white or tinted on old decorated or undecorated wall surface including preparation of surfaces by washing rubbing down and stoping of distempered and painted surfaces complete all as specified. |
| 101 | M & L for applying two coat of distemper oil emulsion white or tinted on new decorated or undecorated wall surface including preparation of surfaces all as specified. |
| 102 | M & L for applying one coat of cement based paint on old decorated or undecorated wall, roof surface including preparation of surfaces and including necessary scaffolding or Jhula upto 4th floor complete all as specified and directed. |
| 103 | M&L for two coats of cement base paint on new plastered wall surfaces over a coat of primer of any description including preparation of surfaces, and including necessary scaffolding or Jhula upto 4th floor complete all as specified and directed. |
| 104 | Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required fixed on wall,110/75/50mmdia, including all fittings complete all as specified and directed. |
| 105 | S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints,50mm dia, fixed to walls complete all as specified and directed. |
| 106 | S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints,75mm dia, fixed to walls complete all as specified and directed. |
| 107 | S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors of 75mm dia complete all as specified and directed |
| 108 | S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints,110 mm dia, fixed to walls complete all as specified and directed. |
| 109 | S&F PVC (SWR) Bends 75mm bore complete all as specified and directed. |
| 110 | S&F PVC (SWR) Bends 110 mm bore complete all as specified and directed. |
| 111 | Same as item No. 110 but with access door complete all as specified and directed. |
| 112 | S&F PVC (SWR) branch piece,single (single Y) equal or unequal , 110mm complete all as specified and directed. |
| 113 | Same as item No. 112 all as above but with access door complete all as specified and directed. |
| 114 | S&F PVC (SWR) branch piece,double (double Y) equal or unequal, 110mm complete all as specified and directed. |
| 115 | Same as item No. 114 all as above but with access door complete all as specified and directed. |
| 116 | S&F PVC (SWR) junction,single (single T) equal or unequal, 110mm complete all as specified and directed. |
| 117 | S&F PVC (SWR) junction,single (single T) equal or unequal, 75mm complete all as specified and directed. |
| 118 | Same as item No. 117 all as above but with access door complete all as specified and directed. |
| 119 | S&F PVC(SWR) floor trap,plain with grating, including jointing with solvent cement, 75mm complete all as specified and directed. |
| 120 | S&F PVC(SWR) gully trap 125/110mm, setting and jointing with solvent cement complete all as specified and directed. |
| 121 | Refixing old steel tubing / UPVC pipe and connections in new or old position (Walls, ceiling, floors/trenches etc.) of 25mm bore. Note : (a) The rates include for cleaning or rerunning the old screw threads as required (b) The rates include for Fittings such as Sockets, bends, elbows, tees, short pieces, caps, plugs, and union etc. if required to be replaced. |
| 122 | Refixing old steel tubing / UPVC pipe and connections in new or old position (Walls, ceiling, floors/trenches etc.) of 20mm bore. Note : (a) The rates include for cleaning or rerunning the old screw threads as required (b) The rates include for Fittings such as Sockets, bends, elbows, tees, short pieces, caps, plugs, and union etc. if required to be replaced. |
| 123 | Refixing old steel tubing / UPVC pipe and connections in new or old position (Walls, ceiling, floors/trenches etc.) of 15mm bore. Note : (a) The rates include for cleaning or rerunning the old screw threads as required (b) The rates include for Fittings such as Sockets, bends, elbows, tees, short pieces, caps, plugs, and union etc. if required to be replaced. |
| 124 | Taking up or down steel tubing and connections, including cleaning for refixing or removal to store of 15mm bore sizes complete all as specified and directed. |
| 125 | Taking up or down steel tubing and connections, including cleaning for refixing or removal to store of 20mm bore sizes complete all as specified and directed. |
| 126 | Taking up or down steel tubing and connections, including cleaning for refixing or removal to store of 25mm bore sizes. |
| 127 | M&L for UPVC pipe of pressure 10 kgf/cm 2 suitable for water supply distribution incl all fittings of outer dia of the pipe 15mm complete all as specified and directed. |
| 128 | M&L for UPVC pipe of pressure 10 kgf/cm 2 suitable for water supply distribution incl all fittings of outer dia of the pipe 20mm complete all as specified and directed. |
| 129 | M&L for UPVC pipe of pressure 10 kgf/sqcm 2 suitable for water supply distribution incl all fittings of outer dia of the pipe 25mm complete all as specified and directed. |
| 130 | S&F of 20mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down steel tubing and connection and stacking for issuing under credit complete all as specified and directed |
| 131 | S& F in repair bore dia of pipe 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed |
| 132 | Demolition of reinforced cement concrete, (other than ground floors), shelves, chajjas, slabs and stair case similar work carefully and matching to adjoining disturbed surfaces complete all as specified and directed |
| 133 | M&L for RCC 1:2:4 type B1 using 20 mm graded stone aggregate as in slab, shelves and stair case etc.all as specified and directed. |
| 134 | M&L for RCC type B 1, 1:2:4 using 20mm graded stone aggregate as in beams, cantilevers, lintels, over 1.5 m span complete all as specified and directed. |
| 135 | M&L for RCC 1:2:4 type B1 using 20 mm graded stone aggregate as as in chajjas and like all as specified and directed. |
| 136 | M&L for formwork to chullah hoods, chajjas, trough and similar items including edges finished rough surfaces of concrete complete all as specified. |
| 137 | M&L for formwork to sides and soffits of lintels,lintel bend, beams etc finished rough surfaces of concrete complete all as specified. |
| 138 | Form work to soffits of suspended slabs flat surface of concrete finished rough surfaces of concrete not exceeding 200mm thick, complete all as specified and directed. |
| 139 | S&F TMT bars 10mm dia and over, cut to length, bent to shape required,including binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 140 | S&F TMT bars 5mm and over upto and including 10mm dia in stirrups, spacers and binders bent to shape required,including binding with mild steel wire (annealed) not less than .9mm dia complete all as specified and directed. |
| 141 | Dismantling mild steel framed/unframed work of any description not other wise provided complete all as specified and directed |
| 142 | M&L for Framed work as in doors or gates of any section (solid/hollow) with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other rivering, running rails and uides) and hanging; also fastening and fixing complete using Fe-290(Gde E-165). |
| 143 | S&F in repair, Mild steel, plain, black sheet 0.63mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required |
| 144 | Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles including removal of debris outside MoD land |
| 145 | M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6. |
| 146 | Providing water proofing treatment to RCC sunken slab as specified and directed as under:- (a) Cleaning the existing RCC sunken slab and vertical wall/RCC beam and hacking the surface. (b) 15mm thick plastering over the floor & vertical surface in CM 1:4, mixed with liquid water proofing compound @ 200ml per 50 kg of cement trowelled to even and smooth finish without using extra cement. (Water proofing compound shall be measured and paid separately). (c ) filling the sunken portion with water for 72 hrs and carring out the ponding test.(Any leakage /seapage noticed shall be repaired). (d) Applying two coats of elastomaric acrylic water proof coating Make: Dr. Fixit of pidilite or equivalent per sqm in each coat with roller application.(Note: Each coat of elastomaric acrylic compound requires 6-8hrs to dry up itself second coat shall be applied on getting the first coat completely dried up.) |
| 147 | Taking down Un-Serviceable point wiring of Aluminium on batten/surface conduit/concealed conduit wiring (light/Fan/socket/call bell/ Power ) complete including fixture and fittings such as switches, ceiling roses, shades, sockets, holders, light fittings and call bells etc ) removing materials to store for taking credit after completion of work (Credit for above items should be made as per conditions separately) and making good the disturbed surfaces of walls/floors/ ceilings etc. complete all as specified and directed. |
| 148 | M&L for point wiring with multi - stranded FRLS copper conductor 1.5 Sqmm size nominal area PVC insulated unsheathed cable 1100 volts grade conforming to IS:694 drawn in and including FRLS PVC rigid conduit with new sunk in pressed steel terminal boxes of 1.6 mm thick size or plastic gang box as per site requirement and providing new 3mm thick plastic laminated sheet cover of required colour fixed with brass screws and cup washers including single core stranded copper conductor 1.5 Sqmm PVC insulated unsheathed FRLS cable as earth wire to common earth and connected to earth dolly and earth terminal box drawn in same concealed conduit all as specified and directed for one light/fan/exhaust fan/call bell point controlled by one switch. Note : Red/Blue/Yellow for phase, black for Neutral and Green for Earth. Make of Cable : Finolex/ Havell's /Polycab Make of Conduit : precision/Polycab/Anchor |
| 149 | All as per item No. 148 here in before but one three pin socket outlet 5 Amps, on independent Board complete all as specified and directed. |
| 150 | All as per item No. 148 here in before but one three pin socket outlet 5 Amps on the same Board complete all as specified and directed. |
| 151 | All as per item No. 148 here in before but one 3 pin socket outlet 15 amps independent with cable 2.5 Sqmm complete all as specified and directed. |
| 152 | All as per item No. 148 but one light point controlled by two 2 way switches complete all as specified and directed. |
| 153 | M&L for sub main wiring with 3 run of 6 sq mm for phases, neutral and earth using single core multistranded copper conductor as per IS 694 PVC (FRLS) insulated, unsheathed ,multistrandard copper conductor drawn in and including FRLS PVC Casing caping with all accessories etc and earth conductor connected to common earth dolly including taking out old unsv aluminium / copper wiring complete all as specified and directed. Make of Cable : Finolex/Havell's/Ploycab Make of Conduit : Precision/Polycab/Anchor |
| 154 | All as per Item No.153 but 4 sqmm complete all as specified and directed. |
| 155 | Supply & Fixing Regulator, Electronic step type, suitable for Ceiling fan and connection complete all as specified and directed. Make : Anchor/Leader/CONA |
| 156 | Supply and Fixing Switch flush type, 5 Amps, single pole, one way and connection complete all as specified and directed. Make : Anchor/Leader/CONA |
| 157 | Supply and Fixing Switch flush type, 5 Amps, single pole, two way and connection complete all as specified and directed. Make : Anchor/Leader/CONA |
| 158 | Supply and Fixing Switch Socket combination, 2 in 1, 3 pin 5 & 15 Amps (6 pin) flush type and connection complete all as specified and directed. Make : Anchor/Leader/CONA |
| 159 | Supply and Fixing Switch Socket combination, 3/2 pin 5 Amps flush type and connection complete all as specified and directed. Make : Anchor/Leader/CONA |
| 160 | Supply and Fixing Socket outlet 3 pin, 5A, flush type and connection complete all as specified and directed. Make : Anchor/Leader/CONA |
| 161 | Supply and Fixing Ceiling Rose Surface Poly carbonate type 65 x 50 mm three terminals and connection complete all as specified and directed. Make : Anchor/Leader/CONA |
| 162 | Supply and fixing Bell push, flush type, 5 Amps, single pole.and connection complete all as specified and directed. Make : Anchor/Leader/CONA |
| 163 | Supply and fixing Bell, AC, Ding Dong type 230 Volt. Make : Anchor/Leader/CONA |
| 164 | S&F Sheet metal enclosure for DB's double glazed door IP-43 Single pole & neutral 240 V, 8 way with cable end box conforming to IS-8623-1 & 3, IEC 61439-1 &3 made in CRCA sheet steel, RAL 9003 powder coated ready to use DB's provided with 100 A insulated phase bus bar, neutral bar with shrouds, earth bar, sticking saddles, cement spill protector, colour coded interconnection wire set, cable ties, blanking plates and circuit identification label with provision for DP MCB as incomer and SP MCBs as outgoing including taking down old unserviceable MCB DB complete all as specified and directed. Make/Model : L&T /Schneider/Seimens. |
| 165 | All as per Item No.164 but 4 way SPN complete all as specified and directed. |
| 166 | S&F Sheet metal enclosure for DB's double glazed door IP-43 Vertical Triple pole & neutral 415 V, 4 way with cable end box conforming to IS-8623-1 & 3, IEC 61439-1 &3 made in CRCA sheet steel, RAL 9003 powder coated ready to use DB's provided with insulated vertical phase bus bar, neutral bar with shrouds, earth bar, sticking saddles, cement spill protector, colour coded interconnection wire set, cable ties, blanking plates and circuit identification label with provision for 3/4 pole MCCB as incomer and SP/TP MCB as outgoings including taking down old unserviceable MCB DB complete all as specified and directed. Make/Model : L&T /Schneider/Seimens. |
| 167 | S&F Single pole and neutral sheet metal enclosure with two pin and earth plug and socket complete with one single pole MCB 16/20 Amps all as specified and directed. Make/Model : L&T /Schneider/Seimens. |
| 168 | S&F single pole MCB 6 to 16 Amps 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘C’ curve, 15 KA breaking capacity conforms to IS/IEC 60947-2 and terminal box suitable upto 35 sqmm cable complete all as specifed and directed. Make/Model : L&T /Schneider/Seimens. |
| 169 | S&F DP MCB 32 Amps 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘C’ curve, 15 KA breaking capacity conforms to IS/IEC 60947-2 and terminal box suitable upto 35 sqmm cable complete all as specifed and directed. Make/Model : L&T /Schneider/Seimens. |
| 170 | Supply and Fixing Miniature circuit Breakers, C curve Triple pole & neutral, 415 Volts of capacity (40 to 63 Amps) as ordered breaking capacity 10 KA complete all as specified and directed. Make : L&T/Seimens/Schneider |
| 171 | Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed. Make : Wipro/Philips/GE |
| 172 | Supply and fixing LED tube light fitting 1X 20W decorative ultra slim linear LED with extruded aluminium environmental friendly energy efficient 230V,complete with all accessories internally prewired and including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. Make : Wipro/Philips/GE |
| 173 | Supply and fixing LED tube light fitting 1X10W decorative ultra slim linear LED with extruded aluminium environmental friendly energy efficient 230V,complete with all accessories internally prewired and including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified ans as directed. Make : Wipro/Philips/GE |
| 174 | Taking down fan, sealing cable end, dismantling blades and removing fan and blades to store complete all as specified and directed |
| 175 | Hanging only ceiling/exhaust fan and connecting up including provision of cable from ceiling rose or connector to complete all as specified and directed |
| 176 | S&F LED bulb 7 watt complete all as specified and directed. Make Wipro/Philips/GE |
| 177 | S&F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed. |
| 178 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and directed. |
| 179 | Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion complete all as specified and directed |
| 180 | Supply, laying and testing service connection through cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3½ core all as specified and directed. |
| 181 | Excavation in trenches not exceeding 1.50m deep and not exceeding 1.5m width in soft/loose soil for taking out / laying of UG Cable and laying of pipe line complete all as specified and as directed. |
| 182 | Returning filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm in soil complete all as specified and directed. |
| 183 | Removal of excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed. |
| 184 | M&L for cushioning for protection of cable using dry river sand, free from particles all as specified and directed. |
| 185 | M&L for Protection to cable with one layer of new bricks laid flat butting to each other in such a way that the length of the bricks is at right angle to the central axis of the cable using old size sub-class ‘B’ bricks/fly ash bricks all as specified and directed. |
| 186 | Supply and fix 50 mm bore light grade GI pipe for cable protection including fixing with suitable size of clamp on wall / laying in ground etc complete all as specified and directed. |
| 187 | Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/ walls complete including connections of bore size of pipe 25mm dia all as specified and directed. |
| 188 | Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/ walls complete including connections of bore size of pipe 50mm dia all as specified and directed. |
| 189 | Supply and fix Gun metal globe valves with iron wheel head screwed both end for iron pipe of sizes 25mm bore complete all as specified and as directed. |
| 190 | Supply and Fix Gun metal globe valves with iron wheel head screwed both end for iron pipe of sizes 50mm bore complete all as specified and as directed. Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail