|
| 1 | Dismantling of brick work or stone work and cement concrete in lime or cement mortar and including stacking of material with in a distance of 60m as per direction of Engineer-in-charge. complete for proper completion of work. |
| 2 | Dismantling of Reinforced cement concrete including stacking of material with in a distance of 60m as per direction of Engineer-in-charge. complete for proper completion of work. |
| 3 | Earth work in foundation including digging and refilling the trenches with its proper disposal within 30 meters lead & 1.5 meter lift.etc.complete for proper completion of work. |
| 4 | Laying PCC M-10 (1:3:6 ) with cement,coarse sand & Brick ballast in foundation with Dismantle Brick ballast & Coarse sand (sonbhdra) I/C all cost of material,labour and T.& P. etc. complete for proper completion of work. |
| 5 | Laying C.C. (M15 1:2:4) 40mm thick with cement,coarse sand (sonbharda) & stonegrit(12.5-20mm) including all cost of materials,T&P and labours etc.complete for proper completion of work. |
| 6 | 1st class brick work M-150 in foundation 1:6 cement mortar including all cost of materials,T&P and labours etc.complete for proper completion of work. |
| 7 | 1st class brick work M-150 in super structure 1:4 cement mortar including all cost of materials,T&P and labours etc. complete for proper completion of work. |
| 8 | Centering and shuttering for R.C.C. work including all cost of materials,T&P labours and other accessories required for proper completion of work. |
| 9 | Reinforcement work with cutting, bending and binding of steel 10 mm dia(Fe 550 HYSD Bar) and placing in proper position including cost of all materials, labour, T&P etc.complete for proper completion of work . |
| 10 | 10 mm dia |
| 11 | 12 mm dia |
| 12 | Reinforced Cement Concrete M-20 1:1.5:3 (Cement, coarse Sand and stone grit) in plinth beam, lintel beam & slab including cost of all material, labour, T&P, Mechanical Mixing, Curing etc complete for proper completion of work . |
| 13 | Earthwork by power Transport for a lead of up to 1 Km. including excavation loading, unloading, stacking, manual compaction & dressing including all lift shall be applicable for lead up to 1 Km.complete for proper completion of work . |
| 14 | 12 mm thick plaster with 1:4 Cement mortar consisting of 1 part cement and 4 part coarse sand 1.25 F.M minimum thickness not to be less then 10mm including supply of all materials labour and tools and plants etc. required for proper completion of work. |
| 15 | Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and lded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1Cement : 3 coarse sand : 6 graded tone aggregate 20 mm nominal size).required for the proper completion of the work. |
| 16 | Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frameto be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. Thehinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1mm) wall thickness and 3 each. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer- in-charge Extruded section profile size 48x40 mm,required for the proper completion of the work. |
| 17 | Providing and fixing M.S. grills of required pattern in frames of windows etc with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to steel windows by welding.etc. required for the proper completion of the work. |
| 18 | Supply and fixing 6mm thick CHINA white glazed tiles (ceramic tiles) in flooring skirting or dado with 1:3 cement and approced coarse sand working and the joints finishing with white cement slurry, jointing and polishing complete including supply of all materials and wastage labour tools and etc. required for the proper completion of the work. |
| 19 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.Size - 600 X 600 mm.etc required for proper completion of the work. |
| 20 | Laying of 25 mm thick KOTA STONE of size 45 x 45 cm and above flooring over previously prepared base with 2 cm thick 1:3 cement and sand mortar including filling of joints with cement mixed with pigment required for matching the shade of floor as per direction of E/I including cutting polishing with wax polish including supply of all materials T&P etc required for proper completion of the work. |
| 21 | Laying of 25 mm thick KOTA STONE of size 45 x 45 cm and above flooring over previously prepared base with 2 cm thick 1:3 cement and sand mortar including filling of joints with cement mixed with pigment required for matching the shade of floor as per direction of Engineer-in-charge including cutting polishing with wax polish including supply of all materials T&P etc required for proper completion of the work. Same as above but in dado with 25 mm thick stone. |
| 22 | Providing and fixing of 18 mm thick gang saw cut mirror polished(premoulded and prepolished) machine cut for kitchen plateforms,vanity counters,window sill, Facia and other similer location of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4(1Cement :4 Coarse Sand ) with joint treated with white cement,mixed with matching pigments,epoxy touch up, including rubbing,curing, moulding and polishing to edge to high gloss finish etc.complete at all level.etc.required for proper completion of the work. |
| 23 | Supply and fixing of 32 MM thick flush doors commercial quality conforming to I.S. 2202 Part 1 (1983) including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges bolts locks handles springs fitting with necessary screws to be supplied departmentally.etc.required for proper completion of the work. |
| 24 | 24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and railsmitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws.The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H'section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter) |
| 25 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 10 mm dia 150 mm long etc.required for proper completion of the work. |
| 26 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : (250x16mm) etc.required for proper completion of the work. |
| 27 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws, 100x10 mm dia etc.required for proper completion of the work. |
| 28 | Providing and applying white cement based putty of average thickness 1 mm of approved brand & manufacturer, over the plastered wall surface to prepare the surface even and smooth.etc.required for proper completion of the work. |
| 29 | Distempering two coat with oil bound distemper of approved brand and manufacture and of required shade on undercoated wall surface to give an even shade over an including a priming coat cement primer of approved brand and manufacture such as Berger, J&N, Shalimar,Asian Paints after thoroughly brushing the surface free from mortar dropping and other foreign matters and also including preparing the surface even with plaster of paris or approved synthetic material and sand papered smooth including cost of all materials.etc.required for proper completion of the work. |
| 30 | Applying priming coat over new wood work and other metal surface after and including repairing the surface throughly cleanin oil grese dirt and other foreign matter and scoured wire bruses mfine steel /wood scrappers sand pepering and knotting including cost of all materials labours and T&P etc.required for proper completion of the work. |
| 31 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture etc. required for proper completion of work. |
| 32 | Supply and fixing galvanized mosquito heavy quality iron wire gauge of expanded metal heavy quality our windows and including C.P.teak wood battens 3cmx10cm with servers and including supply of all in materials, labour and tools and plants etc. required for proper completion of work. |
| 33 | Providing and laying \\"Brick Coba\\" 12mm thick laid with M-150 class brick bat coba 7.50 cm thick with gap of 15mm to each other , over 20mm thick base of cemet mortor 1:4 cemet and coarse sand mixed with water proofing compound spreading cement slurry mixed with aerelic cement concrete water proofing compound filled gaps of coba & top of coba mortor mixed with water proofing compoud in 1:4 cement and coarse sand mortor finished smooth and top mashed false square 30cm x 30cm and side wall parapet shall be mono tythic plaster wall upto 30cm height and junction and corner shall be rounded by bbrick ballast cement and coarse sand masonary coba with top finished plaster mixed with acetic water proofing compound @ 2% by weight & includig S/o all material , labour T & P etc. copmlete for proper completion of work. |
| 34 | SANITARY & WATER SUPPLY WORKS |
| 35 | Providing and fixingof 15mm dia CPVC pipe SDR-11 conclaled in wall and floor (Approved make by E/I) With CPVC fitting (band, socket, elbow, tee, long screw, nipple etc. ISI marked and clamps including making good the damage in wall ceiling and floor including supply of all material, labour & T&P etc complete as per direction of E/I. |
| 36 | 15 mm CPVC PIPE |
| 37 | Same as above item but for 20mm CPVC pipe. |
| 38 | Same as above item but for 25mm CPVC pipe. |
| 39 | Supply and fixing of PVC SWR ring fit (as per IS 13592 with lalest amedments) type-B) phenolex prince suprime or approved make soil waste and vent pipe dia 110 mm (OD) cpmplete with all necessary fitting such as band, collor, socket, elbow, tee etc) complete for proper completion of the work as per direction of the E/I. |
| 40 | Supply and fixing of SWR phenolex prince suprime make nahani trap 100mm x 90 mm ombeded in cement concrete 1:2:4 (1 cement ; 2 coarse sand : 4 stone grit 20mm size) including supply of all material, labour T&P etc. complete as per direction of E/I. |
| 41 | Supply and fixing of ISI marked parryware/Jonson/Cerra make orrisa pattern WC pan size 580mm of approved quality including 10lit capacity low level PVC sistern with all accssories. The rate is inclusive of supply and fixing of WC pan-1 no, low level cistern PVC 10 lit capacity -1 No, SWR P-trape- 1No, Flush pipe 30mm dia PVC ( of approved make 1No) PVC connection of heavy duty (appropritate length) and fixing is to done in cement conctete 1:2:4 ( 1cement, 2 coarse sand : 4 stone grit 20mm size) along with all other consumables necessary for fixing etc. complete required for proper completion of the work as per direction of E/I. |
| 42 | Supplying and fixing of 20mm dia Heavy Duty CPVC ball Valve ISI Marked as per direction of E/I. |
| 43 | Supplying and fixing of 25mm dia Heavy Duty CPVC ball Valve ISI Marked as per direction of E/I. |
| 44 | S/F 550x400 mm. Ist. Quality ISI marked parryware/Jonson/Cera make white glazed earthenware hand wash basin with pillar cock, the rate is inclusive S/F of wash basin-1No, C.I. bracket-1 pair, PVC waste pipe-1 No. (of appropriate length, 30 mm. dia C.P. coupling waste half threaded) with grass coupling and PVC connection of heavy duty and all other consumable such as laid, jute etc. in cement concrete 1:2:4 etc. including all material, labour, T & P etc. required for proper completion of work as per direction of E/I. |
| 45 | Supply and fixing of C.P. bib cock 15mm dia Long body of approved make as per direction of E/I. |
| 46 | Supply and fixing of C.P. bib cock 15mm dia Short body of approved make as per direction of E/I. |
| 47 | Supply and fixing of CP angle valve 15mm dia of approved make as per direction of E/I. |
| 48 | Providing and placing on terrace (at all floor levels polyethylene water storage tank of capacity 500 Litre, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank as per direction of E/I |
| 49 | S/F steel sink Prince/ Blue star/Paryware size 600x450x250 mm. including 40 mm. dia PVC waste pipe of appropriate length C.I. bracket 1 pair C.P. waste Jali full threaded and all other consumable such as laid, jute etc. in cement concrete 1:2:4 etc. including all material, labour, T&P etc.required for proper completion of work as per direction of E/I. |
| 50 | Supply and fixing of CP Brass shower (100 mm dia) of approved make as per direction of E/I. |
| 51 | Providing and fixing to filter and lowering to proper levels 40 mm G.I. pipe for tube well including cleaning and priming the tube well. for 40m depth & Fixing S.C.I. hand pump of approved quality for 40mm dia .etc. including all material, labour, T&Petc.required for proper completion of work as per direction of E/I. |
| 52 | Providing and fixing to Precost concrete round septic tank (10 user) with instalation complete including all material, labour, T&P etc.required for proper completion of work as per direction of E/I. |
| 53 | Providing and fitting 1 H.P. motar pump including all material, labour, T&P etc.required for proper completion of work as per direction of E/I. |
| 54 | Electrification work |
| 55 | Wiring for light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVCconduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.Group A |
| 56 | S/F wiring for circuit/ submain wiring alongwith earth wire with thefollowing sizes of FRLS PVC insulated copper conductor, singlecore cable in surface/ recessed steel conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire (DB to SB) as per direction of E/I |
| 57 | Supplying and fixing following way, single pole and neutral,sheet, MCB distribution board, 240 V, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earthbar, din bar, inter connections, powder painted including earthing etc. as required.(But without MCB / RCCB / Isolator) 6way double door as per direction of E/I. |
| 58 | Supplying and fixing 5 A to 32 A rating ,240/415 V ,10kA, \\"c\\" curve miniature circuit breaker suitable for inductive load for following poles in the existing MCB Db complete with connections , testing, and commissioning etc. as required. Double Pole as per direction of E/I. |
| 59 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding moduler plate etc. as required as per direction of E/I. |
| 60 | Supply and burring of 600x600x6 mm G.I. plate vertically for earthing with its top at least 3m. Below gound level complete with 20 mm dia G.I. pipe and funnel for watering and one earthing leads of 2 nos.6 SWG G.I. wire in 15 mm GI pipe up to switch board (From apron to switch board GI wire will be extra) 30cm. square C I frame with hinged cover masonary housing alternate layers of charcoal/coke and salt as least 150mm thick alround etc. as per direction of E/I complete in all respects. |
| 61 | S/F of 2 no 6SWG GI wire in 15mm dia, GI pipe for earthing, laid in ground or in wall duty concealed including the cost of cement, sand, labour, T&P and other material required for proper completion of the work as per direction of E/I. |
| 62 | Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required . 5/6 A Switch outlets as per direction of E/I. |
| 63 | Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required . 3 pin 5/6 A Socket outlets as per direction of E/I. |
| 64 | Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required .15/16 A Switch outlets as per direction of E/I. |
| 65 | Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required . 6 pin 15/16 A Socket outlets as per direction of E/I. |
| 66 | Supply and fixing hexagonal/Round G.P.fan box of approved make made up of 1.0 mm thick ISI Marked G.P.sheet spot welded Four to Eight holes of 25.4 mm for pipe entry of the box. Holes should be semi-shuttered type with 0.5 mm G.P. Sheet made upper & lower cover duly screwed fitted with 300 mm round zink coted M.S Bar X 12 mm & brand name should be embossed. Fixing with wiring conduit laid in the R.C.C. roof before concreting alongwith supply of all material, labour, T&P etc. required for proper completion of the work as per direction of E/I. Please Enable Macros to View BoQ information |
