|
| 1 | Dismantling old PGI/CGI sheeting of any gauge thickness, including Nainital. Sikkim or similar pattern roof/facia etc complete all as specified and directed by Engr-in- Charge. |
| 2 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engr-in- Charge. |
| 3 | Taking down cement plaster of any description on brick or stone walls incl raking out joints hacking for key, scrubing down with water etc complete all as specified and directed by Engr-in- Charge. |
| 4 | Demolition to cement concrete in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engr-in- Charge. |
| 5 | Demolition of concrete of any description and in any position not otherwise specially provided for complete all as specified and directed by Engr-in- Charge. |
| 6 | Demolition of reinforced cement concrete of any description and in any position not otherwise specially provided for complete all as specified and directed by Engr-in- Charge. |
| 7 | Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and removal of dismantled materials/rubbish from site complete all as specified and directed by Engr-in- Charge. |
| 8 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) each area n.exc 1.5 sqm complete all as specified and directed by Engr-in- Charge. |
| 9 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) each area exc 1.5 sqm nut n.exc 4Sqm complete all as specified and directed by Engr-in- Charge. |
| 10 | M&L for 75mm thick PCC type C2 1:3:6 (using 40mm graded stone agg) as in plinth protection/Path/hardstanding finished the concrete surfaces even and smooth without using extra cement etc complete all as specified and directed by Engr-in- Charge. |
| 11 | S&F for 0.50mm thick pre-painted galvalume aluminium zinc coating GI based corrugated steel sheets of any colour and any pattern as approved having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws as in roof complete all as specified and directed by the Engr-in-Charge. |
| 12 | S&F for 0.50mm thick pre-painted galvalume aluminium zinc coating GI based plain steel sheets of any colour having tensile strength of 550 Mpa as in ridges, valley, eaves, etc fixed with self tapping screws complete all as specified and directed. |
| 13 | Demolition of Brickwork/block or stone/ boulder masonry, built in cement mortar complete all as specified and directed by Engr-in- Charge. |
| 14 | M&L for pre cast cement concrete block masonry with solid blocks, exc. 10 cm in width and settting in cement mortar 1:6 type C1, (1:3:6) (using 20 mm graded stone aggregate) as per IS 383 complete all as specified and as directed. |
| 15 | M&L for 20mm thick rendering in cement plaster in CM (1: 4) in two layer and top layer 10mm thick shall be mixed with WPC @ 3% by weight of cement on fair faces of stone masonry wall incl finish the surface even and fair without using extra cement complete all as specified and directed by Engr-in- Charge. NOTE:- (WPC shall be measured and paid separatly) |
| 16 | Supply only Integral waterproofing compound . |
| 17 | M&L for 15 mm thick rendering plaster on fair faces of conc faces/ brick wall faces of smooth without extra cement in CM 1:6 complete all as specified and as directed . |
| 18 | M&L for 5 mm thick cement plaster 1:3 on fair faces of brick work or concrete surfaces in ceiling and finishing the surface even and smooth (without using extra cement) complete all as specified and directed. |
| 19 | M&L for applying two coats of white wash on old plastered ceiling surface incl complete removal of existing surfaces etc complete all as specified and directed. |
| 20 | M&L for Preparing new plastered wall surfaces and finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) etc complete all as specified and directed. |
| 21 | M&L for applying three coats of white wash on new plastered wall surface including preparation of new and previously untreated surfaces of wall complete all as specified and directed . |
| 22 | M&L for preparation of new plastered surfaces of walls and applying two coats of distemper, oil emulsion, white or tinted over new wall suface complete all as specified and directed. |
| 23 | Material and labour for applying two coats of exterior acrylic emulsion painting over a coat of alkali resistant primer including complete removal of existing surfaces including scafolding upto 15M ht and preperation of old/new surfaces all as specified and directed. |
| 24 | M&L for preparation of complete removal of existing treatement on old plastered surfaces of walls applying two coats of distemper, oil emulsion, white or tinted over old wall surface on over primer complete all as specified and directed. |
| 25 | S&F in repairs powder coated aluminium sliding window (three track) with aluminium frame of section 62.30 x 44.50 x 1.5 mm with shutter stiles rail of aluminium section of size 47.62 x 44.45 x 1.5mm thick including jointing cleat for fixing binder hardware glazing clips rubber packing for air lock purpose anodized aluminium strip bearing screw etc for fixing glass pans in frame shutter covered with fully selected quality glass 4mm thick tinted/plain glass with rubber packing and locking arragement and fly proof shutter of same size with aluminium wire mesh . complete all as specified and as directed. |
| 26 | All as per item No 25 above but openable/fix type window/ventilator complete all as specified and directed. |
| 27 | M&L for second class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded on chamfered put together with glue pinned and joints complete all as specified and directed. |
| 28 | S&F Plain framed, panelled shutter (two panel) 35mm thick with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 29 | S&F 35mm thick 2nd class Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed. |
| 30 | S&F of 100 mm size butt hinges, medium weight, cold rolled mild steel and fixed, all as specified and directed. |
| 31 | S&F 150mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed by Engr-in- Charge. |
| 32 | S&F of 150 mm size aluminium handles, cast type, anodised, all as specified and directed. |
| 33 | S&F 250 mm long aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium complete all as specified and as directed. |
| 34 | M&L in repairs 18 to 19mm thick Prelaminated particle board, interior grade, one side with decorative choice lamination & other side balancing white, fixed with screws/nails to timber frame work complete all as specified and directed by Engr-in- Charge. |
| 35 | S&F in repairs 30mm continous (piano) hinges brass, bright finish or electrogalvanised complete all as specified and directd. |
| 36 | M & L 6mm thick lipping for external teak wood on veneered particle board or block board fixed with nail complete all as directd. |
| 37 | S&F Magnetic door catcher for cupboards etc all complete all as directed. |
| 38 | S&F in repair Mild Steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified & as directed incl taking down old scrap iron grill, complete all as specified and directed. |
| 39 | M&L for preparation of new or previously untreated steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats synthetic enamal paint over one coat of red oxide primer complete all as specified and directed. |
| 40 | M&L for preparation of old steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat synthetic enamal paint complete all as specified and directed. |
| 41 | S&F stain less steel wire mesh 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples complete all as specified |
| 42 | M&L for PCC 1:3:6 type C2 using 40mm graded stone aggregate as in surface channels/drain including forming fair finished to drain channel complete all as specified and directed by Engr-in- Charge. |
| 43 | M&L for non-skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tiles including screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar (1:6), complete all as specified and directed. |
| 44 | M&L for glazed ceramic colouered tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick as in vertical surface such as risers of steps, skirting, dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over and including 10 mm thick rendering in cement mortar (1:4) finished even and rough, complete all as specified and directed. |
| 45 | M & L for Granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and including 15mm thick screed in CM 1:6 etc complete all as spfd and directed. |
| 46 | M&L for Drilling holes in granite or trap stone for bolts, pipes, etc. n. exc 25mm dia complete all as spfd and directed. |
| 47 | M&L for machine cut kota stone slab flooring 20-25mm thick (in single piece) over 15mm thick screed bed in CM (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade including rubbing and polishing ccomplete all as specified. |
| 48 | M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed by Engr-in- Charge. |
| 49 | M&L for RCC type B1 1:2:4 (using 20 mm graded stone aggregate) (Nominal mix)as in Slabs supported on walls, beams and columns in floors, roofs, landings, cover slab, balconies, canopies, deck slabs and in shelves and the like complete all as specified & as directed.NOTE : Re-inforcement shall be measured and paid separately. |
| 50 | M&L for RCC type B1 1:2:4 (using 20 mm graded stone aggregate) (Nominal mix)as in chajjas complete all as specified & as directed.NOTE : Re-inforcement shall be measured and paid separately. |
| 51 | M&L for MS bars 5 mm dia and over upto and including 10 mm dia in stirrups cut to length, bent to shape required incl cranking bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire(annealed) not less than 0.9mm dia quality conforming to TMT bars complete all as specified and directed. |
| 52 | M&L for Formwork (flat rough finished surfaces of concrete) to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as spfd and directed. |
| 53 | M&L for Formwork (flat rough finished surfaces of concrete) to chullah hoods, chajjas, troughs and similar items including edges etc complete all as spfd and directed. |
| 54 | Taking down 20mm dia steel tubing and connections, including cleaning and refixing or removal to store complete all as directed. |
| 55 | Taking down 25mm dia steel tubing and connections, including cleaning and refixing or removal to store complete all as directed. |
| 56 | Supplying and laying of 20mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified etc complete all as directed by the Engr-in-Charge. |
| 57 | S&F of 25 mm bore steel water tubes, medium grade, galvanised with and including all GI fitting (such as bends, elbows, Tees, connectors, short pieces, back nuts, unions, caps and plug etc ) and fixed complete to wall and ceiling or laid in/on floor, complete all as specified and directed. |
| 58 | S&F of PVC low level flushing cistern 10 litre capacity, valveless syphonic action type complete with inlet, ball valve, float valve, bends brackets, rawl plug, brass screws handle etc complete having BIS description mark with IS:2731 with and including suitable size of MS brackets, plug, screw all as required incl taking down existing high level/low level flushing cistern any type disconnecting pipes and jointing with new one etc, and making good the floors/walls as per existing floor finish/wall finish including 32 mm bore PVC flush pipe and jointing with water closet of any type, complete all as specified and directed |
| 59 | S&F in repairs bevelled edge looking mirror of size 450mm x600mm x 5mm thick with selected quality glass, decorative type with aluminium channel frame, mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers including glass self assembly complete all as directed. |
| 60 | S&F in repairs vitreous china, white colour, flat back, wash hand basin of size 55 x 40CM fixed with brackets , including providing 32 mm dia PVC waste pipe , 32 mm bore CP waste coupling and making all necessary connections complete as directed. |
| 61 | S&F in repairs cromium plated central hole basin mixer/sink mixer Extended casted spout with 450mm long braided hoses complete all as specified and as directed. |
| 62 | S&F in repair 15mm bore dia stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, all as specified and directed. |
| 63 | S&F in repairs stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm complete all as specified and as directed. |
| 64 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store etc complete all as specified and directed by Engr-in- Charge. |
| 65 | S&F in Repair 75 mm dia PVC floor trap of outlet, with gratings, including jointing to waste pipe fixed in PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) complete all as specified and as directed. |
| 66 | S&F in repairs Mild steel sheet eaves gutters 1mm thick 150 mm dia, galvanised class 3, half round with rounded edges complete all as directed. |
| 67 | S&F in repairs PVC (SWR) pipes 150mm dia single socketed in any length with rubber ring joints fixed to walls complete all as directed. |
| 68 | S&F in repairs PVC (SWR) bends 150mm dia for PVC (SWR) pipes, fixed to walls complete all as directed. |
| 69 | S&F in repairs Harrison rails, mild steel, chromium plated 25mm dia with fixing brackets, stops, rollers etc complete all as specified and as directed. |
| 70 | Taking down carefully copper/aluminium point wiring (light, fan,socket or power) complete (including fittings such as switches, ceiling roses, pendants, regulatos, sockets ,light fittings etc ), removing material to store for keeping in safe custody or for taking credit (credit for above items should be made as per condition seperetel) and making good disturbed surfaces of walls, floors etc to match with existing surfaces complete all as specified and directed by Engr-in- Charge. |
| 71 | Taking down unserviceable submain wiring of any size two single core including earth wire and pvc conduit /casing capping and removing materials on site and making good the surface of walls etc complete all as specified. |
| 72 | Taking down unserviceable distribution board or indoor panel of any capacity including wooden board and making good the disturbed surfaces of wall, etc including two coats of white /colour washing /distempering etc to match the existing complete all as specified. Please Enable Macros to View BoQ information |
| 73 | Taking down unserviceable distribution board or indoor panel of any capacity including wooden board and making good the disturbed surfaces of wall, etc including two coats of white /colour washing /distempering etc to match the existing complete all as specified. Please Enable Macros to View BoQ information |
