Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 18-05-2026 | BOQ | BOQ | 05-06-2026 |
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: HQ CWE Jhansi Name of Work: ALTERATION AND SPL REPAIRS TO BLDG NO P-83 UNDER GE GWALIOR Contract No: CA NO CWE/JHA/GWL/TOKEN/10 OF 2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Taking down cement plaster, terrazzo dado in any thickness from brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc including removal of rubbish, vegetation etc outside complex (MOD land) complete all as specified and directed. |
| 3 | Demolition of Brickwork or stone/ boulder masonry, built incement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 4 | M&L for brick work with sub class 'B' bricks (old size) straight or curved on plan, exc. 6m mean radius built, in cement mortar 1:6 as in manholes, septic tanks, soakage pits, drain etc in any position complete all as specified and directed. |
| 5 | M&L for 10 mm thick rendering in cement mortar (1:6) on fair faces or brick work of concrete surfaces of walls, finished even and smooth (without using extra cement) complete all as specified and directed. |
| 6 | M & L for 15 mm thick rendering on wall/concrete surface with cement mortar (1 : 4) finished even and smooth (without using extra cement) with WPC complete all as specified and directed. (WPC Shall be measured seprately) |
| 7 | M&L for rendering 5 mm thick in cement (1:3) on fair faces of concrete as in ceiling, finished even and smooth without using extra cement complete all as specified and directed. |
| 8 | S&F GI wire netting/ Chicken wire mesh 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, etc. in walls, ceilings, stanchions, beams, etc. including all laps, cutting and waste complete all as specified and directed. |
| 9 | Providing and applying 1 mm thick wall care putty over plastered surface to prepare the surface even and smooth all as specified and as directed by engineer in charge. |
| 10 | M&L for new surfaces applying two coat OBD including primer on plaster preparatory to distempering all as specified and directed. |
| 11 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed. |
| 12 | M/L for three coat of white wash on New surfaces (wall) including all prereration complete all as specified & directed |
| 13 | M/L for three coat of white wash on New surfaces Ceiling including all prereration complete all as specified & directed |
| 14 | M&L for preparation of old decorated surfaces (plastered/ un-plastered) of ceiling incl cornices by brooming down with steel brush, scrapping down smoke soot, moulds, moos and efflorescent salts and trading oil and greasy spots and applying One coat of white wash on ceiling complete all as specified and directed. |
| 15 | M&L for preparation of old decorated surface of exterior/Interior wall/Ceiling of projection/chajja by complete removing existing treatment with mechanical sander (rpm 1500-2700) along with internal dust extraction system for clean environment certified by reputed paint manufacturers and cutting of trunk, branches of tree and Cutting or uprooting grass , then washing the surface with Bleaching powder solution for treatment of fungal applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed. |
| 16 | M&L for preparation of old decorated wall surfaces including cornices by broming down with steel brush, scrapping down smoke soot, moulds moss and efflorescent salts and trading oil and grease spots and applying one coat of oil bound emulsion including one coat of primer by using rollers complete all as specified and directed. |
| 17 | M&L Removal of old APP Based membrane of any description, hackeying of plaster underneath and cleaning the roof surface complete all as specified and directed. |
| 18 | M&L for applying Smartcare Damp proof, a fibre reinforced elastomeric liquid water proofing membrane formulated with reinforcing acrylic fibers having Sun Reflectivity Index (SRI) of 105 on horizontal/vertical surfaces of roof/wall/chajjas in multiple coats @2.0 litre/sqm. Primary coat is self-priming coat of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1, damp proof: water) and other coats to be applied undiluted. (ii) The undiluted 2nd & 3rd coatings needs to be reinforced with 40 GSM geotextile to be sandwiched between them. (iii) After that final 4th coating shall be applied. The application shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes complete all as specified and as directed. Notes:-(a) The work shall be executed through authorised applicator of manufacturer only.(b) Authrised Applicator shall be approved by GE before starting of work.(c) All materials shall be procured directly form manufacturer.(d) The contractor shall furnish a written guarantee for the effectiveness of the water proofing treatment for a period of Eight years in favour of GE. |
| 19 | Supply only integral liquid water proofing compound (ISI marked) complete all as specified and directed. |
| 20 | Demolition of concrete of any description in any position all as directed by Engineer -in-charge. |
| 21 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and as directed by engineer in charge. |
| 22 | Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. all as specified and as directed by engineer in charge. |
| 23 | M&L 75 mm thick PCC 1:3:6 (40 mm graded aggregate) Type C2 as in plinth protection , PCC will be laid with 12 mm gap & the gap will be filled up with bituminous joint filler type A complete all as specified and as directed by engineer in charge. |
| 24 | M&L coloured non skid tile 7 to 8mm thick (square/ rectangular) area of each tiles n exc.,0.36 sqm in floor etc. set and jointed with neat cement slurry and pointed in colur cement to match including 15 mm thick screed bed in cm 1:6 complete all as specified and directed. |
| 25 | M&L glazed ceramic tiles 0.60x1.20 mm thick coloured tiles on walls such as skirting and dado and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering in cm (1:4) finished fair and rough as backing coat complete all as specified and directed. |
| 26 | M&L Vitrified cermaic tile 8 mm thick (square/ rectangular) polished area of each tiles exc. 0.42 sqm but n.exc 1.00 Sqm in floor etc. in proper line and level with 2 mm spacer between tiles, using polymer-modified tile adhesive, and joint pointing with cement-sand grout, complete including 15 mm thick screed bed in cm 1:6 complete all as specified and directed. |
| 27 | M&L Vitrified cermaic tile 8 mm thick (square/ rectangular) polished area of each tiles exc. 0.42 sqm but n.exc 1.00 Sqm in vertical surface/ suck as skirting and dado etc. set and jointed with neat cement slurry and pointed in colur cement to match including 10 mm thick rendering in cm (1:4) finished fair and rough as backing coat complete all as specified and directed. |
| 28 | M&L For Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete all as specified and as directed. |
| 29 | M&L 16 to 18 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. complete all as specified and directed. |
| 30 | M&L For Providing, cement concrete 1:2:4 type B1 (20 mm graded aggregate ) as in roof kerbs, mud stops, rounded or chamfered on edges, leveling course in floor & roof, benching, coping etc all as specified and as directed by engineer in charge. |
| 31 | Taking down eaves gutters and rain water pipes (any size 75mm to 110mm of any pattern) ,of any description and in any position, including all fittings , heads, shoes, bends, swan necks, etc., (measured overall as fixed along the centre line over fittings and accessories)complete all as specified. |
| 32 | S&F 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed. |
| 33 | ditto but fixed in wall 110 mm |
| 34 | S&F 75 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed . |
| 35 | ditto but fixed in wall 75 mm |
| 36 | S& F PVC SWR bends any radius 75mm dia with access door or without access door |
| 37 | S& F PVC SWR bends any radius 110 mm dia with access door or without access door |
| 38 | S& F PVC (SWR) junction single, (Single T) equal or unequal 75mm dia with access door or without access door |
| 39 | S&F PVC SWR vent cowl 110 mmn dia |
| 40 | S&F for 100mm bore pipes stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall etc; complete all as specified. |
| 41 | S&F for 75mm bore pipes stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall etc; complete all as specified. |
| 42 | S&F 75 mm PVC (SWR) couplers |
| 43 | S&F 110mm PVC pipe 'P' or 'S' trap, complete all as specified. |
| 44 | Taking down 15mm bore steel water tubing and connections etc, including cleaning for refixing or removal from site complete all as specified. |
| 45 | Taking down 20mm bore steel water tubing and connections etc, including cleaning for refixing or removal from site complete all as specified. |
| 46 | Supplying and laying of 20 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches and fixed/concealed complete to walls and ceiling or laid in floor etc complete all as specified. |
| 47 | Supplying and laying of 25 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches and fixed/concealed complete to walls and ceiling or laid in floor etc complete all as specified. |
| 48 | S&F in repair W.C vitreous china, squatting pan orissa patern size 580x440mm white with intergral foot rest & P - or S trap,flush pipie complete excluding cistern complete all as specified. |
| 49 | S&F for viterous china wash down water closet pan (pedestal pattern) or wall mounted white fixing bolts, excluding flushing cistern and flush pipe including Seat cover, connection to drain and to flushing pipe syphonage pipe etc and mild steel chromium plated or aluminised hinges device & CP Jet complete all as specified and directed. |
| 50 | S&F in repair PVC valveless, syphonic action type flushing cistern low level white with inlet ball valve, float and handle incl brackets and connections to pipes of capacity 10 lts complete all as spepciified and directed. |
| 51 | S&F in repair stop cock/angle valve 15 mm nominal bore brass chromium plated fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directeed |
| 52 | S&F in repair Brass chromium plated shower rose 125mm dial size with15 mm shower arm complete all as specified and directed |
| 53 | M&L 75 mm dia PVC (SWR) floor trap with grating including jointing with solvent cement joint complete all as specified and directed. |
| 54 | S&F PVC connections 15mm size with PTMT nuts of length 450 mm complete all as specified and directed. |
| 55 | S&F in repair CP fancy type bib tap cast copper alloy with crutch or butter fly handle (Long Body), screwed down screwed for iron pipe 15 mm bore of tubing complete all as specified and directed |
| 56 | S&F for 32mm PVC waste pipe for flushing cistern complete all as specified and directed. |
| 57 | S&F 25 mm bore Ball brass valves, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed with all necessary fitting and fixer reducer elbow etc complete all as specified and directed |
| 58 | S&F in repair 15 mm bore cast copper alloy stop valve , fancy type chromimum plated with long shank and cup (concealed type ) screwed down , high pressure, with crutch or butter fly screwed both ends for iron pipr or union and fixed complete all as specified and directed. |
| 59 | S&F in repair 15 mm Fancy type pillar tap cast copper alloy with capstan head chromumum plated screwed down high pressure with or without lettered hot or cold with long screwed shank and fly nut screwed for iron pipe fixed complete all as specified and directed |
| 60 | S&F in repair Vitreous China wash basin white flat back size 580 x 450mm excluding taps waste, chain and plug, but incl brackets fixed waste pipe complete all as specified and directed. |
| 61 | S&F in repair vitreous china counter wash hand basin oval type white size 550 x 450mm or 600x460 mm excluding taps waste chain and plug and porcelain stopper b complete all as specified and directed. |
| 62 | S&F in repair Vitreous China Urinal, Half stall type,white (excluding flushing cistern, flush pipe and waste pipe) white fixing plugs bedding urinal against wall in cement mortar 1:2 securing to plug with and including 60 mm long brass screws urinal spreader of CP any color fixing with 15 mm dia pipe PVC pointing aroung urinal back in cement complete all as specified and directed |
| 63 | S&F in repair Towel Ring of CP fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) all as specified and as directed. |
| 64 | S&F in repair Tubular towel rail, 20mm dia, D type, 60cm long between flanges including brackets all as specified and as directed by engineer in charge. |
| 65 | S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long all as specified and as directed. |
| 66 | S&F in repair 500 ltr capacity rotational moulded polyethylene water storage tanks two layer ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified. |
| 67 | Taking down old U/S wooden /steel chowkhat with shutter nexc 1.50 sqm each and removing from site. |
| 68 | All as per item No. above but exc 1.5 and nexc 4 sqm |
| 69 | Taking down shutter from the frame of any discription n exe 2 sqm each and refixing in same opening in same openinig and necessary repair complete all as specified and directed. |
| 70 | S&F, Box type steel ventilator with top hung shutters (double shutters for glass and guaze) jointed together with an including grills using 10mm square bars @10 cm C/C as per TD No CEBZ/TD/14/2011 including box type hinges with steel handle and steel peg stay complete with glazing bars devetailed and welded complete all as specified and as directed. Note : Glass/guage shall be measured and paid separately under respective item. |
| 71 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 100 x 65 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. |
| 72 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid decorative type/ laminated flush door shutter (single or double leaf) of 35mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S Sscrews shall be paid separately) |
| 73 | M&L for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification of drawing complete all as specified and directed. |
| 74 | M&L for Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification of drawing complete all as specified and directed |
| 75 | S&F 1.25 mm thick lathsSteel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: gear operated type with bevel gear box and crank handle complete complete all as specified and directed. |
| 76 | S&F 100 mm long (size) butt hinges, stainless steel AISI 304 grade with brass/bronze hinge pin, complete all as specified and directed. |
| 77 | S&F 75 mm long (size) butt hinges, stainless steel AISI 304 grade with brass/bronze hinge pin, complete all as specified and directed. |
| 78 | S&F aluminium barrel tower bolt 200 mm long, extruded section complete all as specified and directed. |
| 79 | S&F aluminium barrel tower bolt 75 mm long, extruded section complete all as specified and directed. |
| 80 | S&F 300mm long, Aluminum, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts complete all as specified and directed. |
| 81 | S&F aluminum handles extruded type, anodized of 150 mm size complete all as specified and directed. |
| 82 | S&F aluminum handles extruded type, anodized of 100 mm size complete all as specified and directed. |
| 83 | S&F mild steel stove enamalled black 300 mm,size ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed |
| 84 | M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty or fixed with beads in square n.exc. 0.5 sqm in each pane complete all as specified and directed. |
| 85 | Hacking out old broken galss (any thickness, size, quality or description) from wooden/metal frames or stone concrete or brick surfaces, glazed with putty or fixed with beads complete all as specified and directed. |
| 86 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staplesor MS beads size 2mm to 3mm complete all as specified and directed. |
| 87 | S&F Powder coated (Minimum Thickness 50 Micron) Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 88 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. |
| 89 | S&F Powder coating Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge. |
| 90 | S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed. |
| 91 | S&F Aluminium Die Cast Body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed. |
| 92 | M&L for 4.8mm thick sheet glass quality and glazing with oil putty or fixed with beads in square n.exc. 1.00 sqm in each pane complete all as specified and directed. |
| 93 | M&L Preparing New steel surface of any description over 10 cm width girth not otherwise describe and applying two coat of synthethic enamel paint over a coat of red oxide complete all as specified and directed. |
| 94 | M&L for applying two coat of synthetic enamel paint In new surface over a coat of pink primer on wooden surface exceeding 10 cm in width or girth including preparation of surfaces and including necessary sacffolding complete all as specified and directed. |
| 95 | Cutting holes in brick walls (exc half brick but n. exc one brick) in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required all as specified and as directed. |
| 96 | Dismantling corrugated and semi corrugated & plain steel sheet in roof complete all as specified and directed |
| 97 | M&L for pre-painted galvalume aluminium zinc coating GI based Trapezoidal Profiled Sheet steel sheet 0.50mm AZ-150 of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed |
| 98 | M&L for pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm AZ-150 of an colour having tensile strength of 550Mpa as in ridge, roof covering/cladding to wall, fixed with self tapping screws all as specified and directed |
| 99 | Dismentling of wall and ceiling board or insulation board (fibre, pulp, insulation etc) or insulation bpard/slabs/blankets any thickness including cover fillet complete all as s[ecified and directed. |
| 100 | M&L for solid PVC wall lining cosisting of 5 mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification and directed Note PVC fillets and PVC strip shall be measured separately |
| 101 | M&L for 5 mm thick PVC sheet fillet of width 35 mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification and directed |
| 102 | M&L Providing & fixing false ceiling at all heights with 12 mm thic fully perforated micro tegular edged GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of Sleek texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main- T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners/ wire, 6mm dia fully threaded hanger rod upto 1 OOOmm length and Lshape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. Main ‘T’ runner to be suspended from ceiling using GI soffit cleats/by using dash fastners to RCC lintel or slabs/ by welding MS cleats of suitable size on truss/purlin/rafters” GI adjustable rods of 3mm dia with galvanized butterfly level clips, spaced at 1200mm c/c along at all heights as per directions complete all as specified and directed. |
| 103 | M&L Providing and fixing in position wall paneling at all heights with 10 mm thick fully perforated Square/Square butt edge GRG (Glass Fibre Reinforced Gypsum) panels/ tiles of size 595 x 595mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99% , NRC 0.70 to 0.85 as per IS 8225:1987, Non Combustible as per BS 476 ( Part 4)-1970 and light Reflectance of 75% to 85% ( Minimum ), comprising of a frame made from especially fabricated galvanized mild steel sheet 0.50 mm thick pressed section(galvanizing @120 grams per sqm including both sides) i.e. vertical studs of size 48 x 34 x 36 mm are placed at 600mm center to center in a floor and ceiling channel section of size 50 x 32m fixed to the floor and soffit at 600mm centers using 12mm dia,50mm long wedge type expanded zinc alloy dash fastener with 10mm bolt. This same channel is then to be fixed in horizontal direction at 600mm center to center so as to form a grid of 600mm x 600mm. Glass wool of 50mm thickness is then to be inserted in the slots and finally GRG (Glass Reinforced Gypsum) non combustible panels/tiles are to be screw fixed with self Tapping pan head nickel coated mild steel screws of size 13 x 3.2mm on to this grid leaving an even groove of 1 mm between the panels. The joints between the panels are to be duly jointed and finished using recommended jointing compound and fiber joint tape roll 50mm wide (90 meter )roll and two coats of primer suitable for paneling as per manufacturer’s specification as Per direction of Engineer-in-Charge all complete. |
| 104 | Rehabilitation Load Bearing Wall 0f 20 meterM&L Providing and erecting steel props (up to full height, braced at centre, resting on wedge and block to support the structure provisionally during repair work and maintaining them in position till required and as directed by the Engineer-in-charge. |
| 105 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundations etc. or for shafts, well cess pits, manholes, pier holes, etc. but not exceeding 10 Sqm on plan and getting out in soft/ loose soil complete all as specified and directed. |
| 106 | M&L Plain cement concrete (1:4:8) type D2 (using 40 mm graded stone aggregate) as in foundations / mass concrete complete all as specified.and directed. |
| 107 | M&L for reinforced cement concrete Design mix M-25 ( using 20 mm graded stone aggregate ) as in foundations, including rafts, footings, foundation beams , plinth beams , base for coloumns and mass concrete etc. complete all as specified and directed. |
| 108 | M&L for anchor bolt for Pedestal of size (450mm x 450mm x 1350 mm) (RCC forPedestal Measured Seprately under respective item.) dia of bolt 11 to 15 mm all as specified and as directed. |
| 109 | M&L Plate girder or single stanchions or column of I Section, built up of one beam or channel section with flange plates, caps, bases. splices, angle brackets, cleats and other connections |
| 110 | Removing excavated material n exc. 50m and depositing where directed at alevel n exc 1.5m above the starting point complete all as specified and directed. |
| 111 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in loose/soft soil complete all as specified and directed. |
| 112 | Rehabilitation-Repairtion of RCC Elements slabsM&L for repairing of spalled concrete from ceiling in the following stages:-1. Prepration of existing surfaces like chipping of unsound weak / loose concrete with electric hammer or manually including tapering all edges, making square shoulders of cavities etc. upto 50 mm thickness removal of debries, complete all specified and directed by the Engineer-in-charge.2. Applying rust remover cum passivator Sika or equivalent rustoff 100 @ 0.20kg/Sqm/per coat or as per manufacturer's specifications to remove rust from existing reinforcement (Make : Sika or equivalent)3. Applying a epoxy based zinc rich rebar corrosion protection system of product : Friazinc R @ 0.15Kg/Sqm/coat or as per manufacturer's specifications (Make ; Sika or equivalent) |
| 113 | Replacement of rebarS & F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as specified and directed. |
| 114 | M & L for providing rebar of required length & dia with Sika or equivalent Anchor Fix ® -3/Mungo/Fischer FISV 390/Hilti RE-500 epoxy resin whereever required in RCC members including power drilling for holes (of size 16mmx160mm ), cleaning of holes, filled with epoxy to ensure the bond as per manufacturers instructions, complete all as specified and directed by the Engr-in-Charge. |
| 115 | M&L for repairing of cracked columns, beams and slabs in the following stages:-Prepration of existing surfaces like chipping of unsound weak / loose concrete/cover of reinforcement and removal of debries, including erecting steel props (upto full height) braced at centre, resting on wedge and block to support the structure proisionally during repair work and maintaining them in positioin till required, complete all specified and directed by the Engineer-in-charge. |
| 116 | Making \\"V\\" groove of 5mm wide and 5mm deep over crack line by electrically operated angle grinder with diamond concrete saw blade and cleaning it by air blower and sealing it with Sika felx 127 or equivalent (PU Sealant) as directed by the Engineer-in-charge.(Make : Sika or equivalent) |
| 117 | Drilling and fixing NRV injection packers in RC members including, (a) Drilling Holes: Drilling holes in structural members at the intervals as per recommendation of engineer in charge.(b) Cleaning of holes: Clean the holes by air blower prior to fixing nozzles.(c) Fixing of Packers: Insert 12 mm dia., 50~75 mm long injection packers in cleaned holes with solvent free, moisture insensitive epoxy resin based putty or equivalent.(d) Cutting of Packers: Cut the packers by cut of wheel after completion of grouting without damaging structural elements. |
| 118 | M & L for shrinkage free low viscous epoxy resin based injection grout. Product: Sikadur®-52 or equivalent as per manufacturers instructions and as directed by the Engr-in-Charge. |
| 119 | Applying rust remover cum passivator Sika rustoff 100 @ 0.20kg/Sqm/per coat or as per manufacturer's specifications to remove rust from existing reinforcement (Make : Sika or equivalent) |
| 120 | Applying a epoxy based zinc rich rebar corrosion protection system of product : Friazinc R @ 0.15Kg/Sqm/coat or as per manufacturer's specifications (Make ; Sika or equivalent) |
| 121 | M & l for mixing & applying two component Epoxy resin concrete Bonding coat of Sikadur-32 LP A & B @ 0.40 Kg/Sqm(Mixing proportion as per manufacturer's instructions) on prepared RCC surfaces as per manufacture specification including prepartaion of surface by chipping and throughly cleaning of surface complete whereever required over new reinforcement (if required) and as directed by the Engineer-in-charge.(Make : Sika) (Reinforcement will be measured and paid separatley). |
| 122 | FOR JACKETING OF COLUMN & BEAM WITH MICRO CONCRETEM&L for repairing of spalled concrete from ceiling in the following stages:-1. Prepration of existing surfaces like chipping of unsound weak / loose concrete with electric hammer or manually including tapering all edges, making square shoulders of cavities etc. upto 50 mm thickness removal of debries, complete all specified and directed by the Engineer-in-charge.2. Applying rust remover cum passivator Sika rustoff 100 @ 0.20kg/Sqm/per coat or as per manufacturer's specifications to remove rust from existing reinforcement (Make : Sika or equivalent)3. Applying a epoxy based zinc rich rebar corrosion protection system of product : Friazinc R @ 0.15Kg/Sqm/coat or as per manufacturer's specifications (Make ; Sika or equivalent) |
| 123 | S & F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as specified and directed. |
| 124 | S & F TMT bars 5 to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as specified and directed. |
| 125 | M & L for water tight centering and shuttering including bolting, strutting, propping etc. including removal of form work from column, beam etc. complete all as specified and directed by the Engineer-in-charge. |
| 126 | M & L for ready to use non shrink, cementitious free flow micro-concrete (> 50 mm).Product: SikaRep® Microcrete-4 + adequate coarse aggregate, Yield: approx. 17 ltr/bag (30kg) (depending on the size and quantity of coarse aggregate added)Product requirements: compressive strength > 60 N/mm2 (28 days) according to ASTM C 1107-99, complete all as specified and directed by the Engr-in-Charge. |
| 127 | M & L for applying one part plasto-elastic exterior coating based on UV-curing acrylic dispersion with excellent crack-bridging properties, protective coating system to achieve DFT (Dry Film Thickness) of 150 microns in two coats after application of one coat of Silane Siloxane modified Primer on concrete surface including Surface preparation by high pressure water jet or manually as per direction of Engineer-In-Charge in recommended RAL Shades.Primer: Sikagard®-551 S @ 0.2 kg/m2.Coating: Sikagard®-550 W Elastic @ 0.2 kg/m2/coat in 2 coats. |
| 128 | Waterproofing of Sunken Toiletsa) Dismantling of floor of WC and Bath not exceeding 500mm deep, removing cinder/concrete from sunken portion, cleaning of RCC surface to remove dust, loose particles etc. by compressed air or any other suitable method as per site condition, including grinding of sharp edges complete all as specified and directed.(b) Cleaning of RCC surface to remove dust, loose particles etc. by compressed air or any other suitable technique as per site condition complete all as specified and directed.(c) M&L for providing a glass fibre reinforced acrylic modified cementitious coating system comprising base coat @ 1.50 Kg/Sqm, glass fibre reinforcement and top coat with Sika Top® Seal-107 @ 1.50 Kg/Sqm or equivalent of Fosroc / MC Bauchemie India Pvt Ltd, applied to floor area and vertical surfaces thereof complete all as specified and directed.(d) M&L for 15mm thick protection plaster in cement mortar (1:3) mixed with integral waterproofing compound (IWPC) in accordance with manufacturer’s instructions complete all as specified and directed.(e) M&L for providing 40mm dia GI pipe spout projecting at least 150mm beyond outer face of wall. (Paid separately under respective item).(f) M&L for filling sunken portion with PCC (1:5:10) type F2 using 40mm graded aggregate and finishing with 25mm thick PCC (1:2:4) type B0 complete all as specified and directed.Notes:(i) The work shall be executed only through authorised manufacturer’s applicator.(ii) Para (c) is applicable for both floor area and vertical surfaces of the same area.(iii) For payment, net floor area shall be measured.(iv) The cost of all operations specified above shall be deemed to be included in the quoted rates of the respective items and nothing extra shall be admissible on this account. |
| 129 | Taking down carefully existing aluminum / copper point wiring (light, fan, socket or power point) complete of any description including fitting such as switches, ceiling roses, pendants, tube light fitting, ceiling fan with regulators, sockets, wooden boards, laminated sheets from sunken boxes, boards, shades light fitting etc and making good the disturbed surfaces of walls, floors, ceiling etc to match with existing surfaces complete all as specified and directed. |
| 130 | Taking down ceiling/exhaust fan of any sweep,removing blades, cleaning the fan completely of dust and dirt and Re-hanging the same back to its original positions including connecting with three core flexible copper wire to ceiling rose etc after the completion of the point wiring including replacement of old unserviceable fan hook rubber pad, nut bolts and washers etc, complete all as specified and as directed by Engr-in-charge. |
| 131 | Taking down submain wiring of any size any type and in any position metalic/non metallic PVC conduit of wooden batten complete all as specified and directed. |
| 132 | Taking down unserviceable Sheet metal box & MCB DB SPN with MCB's of any make/capacity, complete, all as specified and directed by Engr-In-Charge. |
| 133 | Taking down unserviceable TPN/VTPN DB with MCB's of any make/capacity, complete, all as specified and directed by Engr-In-Charge. |
| 134 | Taking out and refixing both indoor ,outdoor unit and voltage stabilizer of split type conditioning electrically driven 230V ,AC 50 Hz capacity 1.5/2 Ton in wall with rowl plugs including making holes for inlet /outlet in the wall with condensing unit as per suitable size and making good existing surface including insulation of tubing with expanded polythene foam insulation tubing and making necessary connection including M&L for unplastiised PVC pipe medium duly 20 mm dia for draining out condensed water including minor leakage of gas with refilling of AC gas if leakage in AC all as required and directed including necessary connection through voltage stabilizer complete all as specified and directed. |
| 135 | M&L, concealed point wiring with PVC insulated and unsheathed electric cable 1100 volts grade single core FRLSH confirming to IS 694:2010 having multi stranded copper conductor of 1.5 Sqmm nominal cross sectional area (ISI marked with valid CML No) drawn in and including concealed non metallic rigid PVC conduit medium grade( ISI marked with valid CML No) not less than 20 mm dia with all fitting and fixing accessories and 1.5 Sqmm FRLSH confirming to IS 14930 (Part-I) 2001, PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to common earth dolly by providing suitable lugs with & including pressed steel sunken terminal boxes factory made for mounting switch, regulators etc with and including 2.8 mm thick plastic laminated sheet cover (white) ISI marked, fixed with brass screws and cup washers duly painted with two coats of anti corrosive paint/black bituminous paint outside and two coats of aluminium paint inside for mounting switches. sockets etc complete |
| 136 | One light point controlled by one switch. |
| 137 | One Ceiling fan point controlled by one switch. |
| 138 | One Exhaust/wall fan point controlled by one switch. |
| 139 | One 5 pin multipurpose socket out let 5/6 Amps on the same board with other switch. |
| 140 | One 3 pin/5 pin switch socket outlet, 5 Amps on independent board. |
| 141 | Description all as per item No 7 here in before but point wiring with 2.5 sqmm FRLSH H confirming to IS 694:2010, multistrand copper conductor cable for one six pin socket outlet 15 Amps controlled by one switch on independent board and 2.5 sqmm FRLSH PVC insulated multi strand copper conductor cable as continous earth wire. |
| 142 | M&L in renewal Modular switch 1 way 6 A,1 module complete all as specified and directed. |
| 143 | M&L in renewal Modular Socket, 6A - 2/3 pin combined 2 module,complete all as specified and directed. |
| 144 | M&L in renewal Modular switch 1 way 16 A,1 module complete all as specified and directed. |
| 145 | M&L in renewal Modular Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed. |
| 146 | M&L in renewal ceiling rose surface bakelite 63.5 mm dia three terminal complete all as specified and directed. |
| 147 | M&L in renewal Modular Fan step regulator, 120W - 2 module 240 volts, AC 50Hz complete all as specified and directed. |
| 148 | M&L in renewal Modular Lamp holder with metal ring, PVC/Polycarbonate type with back plate suitable for batten fittings ISI Marked complete. |
| 149 | M&L in renewal LED Lamp 9/10 Watt, complete with 5 star rating. |
| 150 | M&L in renewal Decorative ultra slim LED Tubelight 20W LED Batte LED Tubelight ,colour 6500k TO 4000k as per requirement, fitting of LED with extruded polycarbonate, enviormental friendly energy efficient ready to use, 20 watt, fitting reqd length of not less than 1.0 Sqmm PVC multistranded BIS marked 03/02 core copper conductor for electrical connection from ceiling rose to connector of LED fitting including testing on completion all as specified and directed. |
| 151 | M&L in renewal LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC,colour 6500k TO 4000k as per requirement ,recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete as per specified and directed |
| 152 | M&L in renewal decorative surface mounted hexagonal bulk head Back-lit LED luminair comprising of high brightness LEDs IP 66 protection LED of 10 watt including reqd length of 1.5 Sqmm PVC multistranded 03/02 core copper conductor for connection from ceiling rose to light fittings incl testing on completion all as specified and directed.Make-Wipro/Philips/havells |
| 153 | M&L in renewal 9 Watt Recessed Concealed Ceiling LED Light in Round shape , Color - White all specified and directed |
| 154 | M&L in renewal LED Outdoor/Indoor UP Down Wall Light Warm White, IP-65 Rainproof & Shockproof Alluminium Body (4 Way Splitter)(Metal) all as specified and directed. |
| 155 | M&L in renewal Solar LED Bollard/Pathway/Garden Lamp BIS Approved IP65 Water proof Bollard Landscape Lamp with 800mAh Ni-MH Battery & Panel Decoration LED Spotlight for Walkway 2.5 ft Height including all accesseries Lighting Color -Warm White all specified and directed |
| 156 | M&L in renewal sub main wiring with two single core PVC insulated unsheathed FRLSH confirming to IS 694:2010, multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 4 sqmm size drawn in and including non metallic rigid PVC concealed conduit medium grade (ISI marked with valid CML No) not less than 20 mm dia with all fitting & fixing accessories including one run single core PVC insulated unsheathed 4 Sqmm FRLSH confirming to IS 14930 (Part-I) 2001, copper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected upto DB complete all as specified and directed. (NOTE: (i) Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit and the quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface with putty to match with the existing surface. |
| 157 | M&L in renewal sub main wiring with two single core PVC insulated unsheathed FRLSH confirming to IS 694:2010, multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 6 sqmm size drawn in and including non metallic rigid PVC concealed conduit medium grade (ISI marked with valid CML No) not less than 25 mm dia with all fitting & fixing accessories including one run single core PVC insulated unsheathed 6 Sqmm FRLSH confirming to IS 14930 (Part-I) 2001, copper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected upto DB complete all as specified and directed. (NOTE: (i) Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit and the quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface with putty to match with the existing surface. |
| 158 | M&L in renewal sheet metal enclosure double door for distribution board factory made for MCB DB load link VTPN 8 way suitable for MCCB as incomer, 160 Amp,4 pole & Including MCCB 160 amps 4 pole 16 KA completewith suitable size of busbar complete,fixed flush in wall including chases wall for fixing DB and making good the distributed wall surfaces to match with existing specification including taking down all as directed by Engr-in-Charge at site. |
| 159 | M&L in renewal sheet metal enclosure double door for distribution board factory made for MCB DB load link VTPN 4 way suitable for MCCB as incomer, 100 Amp,4 pole & Including MCCB 100 amps 4 pole 10 KA complete with suitable size of busbar complete,fixed flush in wall including chases wall for fixing DB and making good the distributed wall surfaces to match with existing specification including taking down all as directed by Engr-in-Charge at site. |
| 160 | M&L in renewal MCB DB, sheet metal enclosures double door SPN 12 way with bus bar 240 volts 2 in 1 shutter type (METAL DOOR) type with blanking plates where required and IP 43 degree protection complete all as specified and directed. |
| 161 | M&L in renewal MCB SPN 40 to 63 Amps, 240 volts 'C' series 16 KA ,including connection with suitable size copper lugs complete all as specified and directed. |
| 162 | M&L in renewal, MCB SP 6 to 32 amp 240 volts, 40 Amps, 'C' series 10 KA including connection with suitable size copper lugs. complete all as specified and directed. |
| 163 | M&L in renewal Modular Single pole and neutral enclosure with a two pin and earth plug and socket complete with red and green bottom switch complete all as specified and directed. |
| 164 | M&L in renewal, laying, testing and commissioning of XLPE insulated screened PVC bedded galvanised steel strip or wire armured electric power cable (Heavy duty ) with aluminium conductor 1100 volts grade, cross sectional area size 50 Sqmm 3.5 Core. |
| 165 | M&L in renewal Sand filling in trenches with clean dry unwashed sand free from sharp particles, gently punning around the cables complete. |
| 166 | M&L in renewal Supplying and laying un reinforced precast concrete cable cover Class LV, Type I, flat size 250mm x 150mm x 40mm complete all as specified and directed. |
| 167 | M&L in renewal tube 'Light' grade galvanised with all fitting laid in trenches, fixed to wall and floor of 50 mm dia for cable protection complete all as specified and directed. |
| 168 | M&L in renewal cable jointing kit for 1.1 KV grade cable for end joint complete with Jointing material heat Shrink type and accessories suitable for 3 ½ / 4 core XLPE, armoured, Al conductor cable of size 25 to 50 sqmm,Indoor/Outdoor type complete all as specified and directed. |
| 169 | M&L in renewal GI pipe Med grade of 25 mm dia alongwith all fittings and fixtures complete laid in trenches incl taking down old unsv gi pipe all as specified and directed. |
| 170 | M&L in renewal GI pipe Med grade of 20 mm dia alongwith all fittings and fixtures complete laid in trenches incl taking down old unsv gi pipe all as specified and directed. |
| 171 | M&L in renewal 25 mm Brass Gate Valve cofiorming to IS 14846/2000,ISI Mark MS Spindle and iron wheel head with both ends flanged with new rubber gasket,bolts and nuts including dismantling of old u/s Gate valve fixed at any location of size 25 mmm dia all as specified and directed. |
| 172 | M&L in renewal 20 mm Brass Gate Valve cofiorming to IS 14846/2000,ISI Mark MS Spindle and iron wheel head with both ends flanged with new rubber gasket,bolts and nuts including dismantling of old u/s Gate valve fixed at any location of size 20 mm dia all as specified and directed. |
| 173 | M&L in renewal lightening conductor assembly made out of GI pipe medium grade of size 40 mm bore along with welded flange, fixed on the RCC roof of the bldgs with drilling/making hole and provide fastners, rubber washer, to connect air termination & connector for earth strip duly fixed with necessary fastners, nuts bolts & washers in PCC 1:2:4 type B0 45cm x 45cm x45cm complete all as directed by Engr-in-charge. |
| 174 | S&F in renewal overlap jointing of addl requirements of Aluminium strips by making drilling holes 02 Nos with brass/GI nuts, bolts and lead washers complete as required as per materials. |
| 175 | S&F in renewal porcelain insulator of required size not exceeding than 10 cm long with two nos hole each on both end for fixing properly with fastner, nuts & bolts on wall & roof of buildings for separated earthing stirp from building all as required at site & directed by Engineer in Charge. Note : (i) Water leak protection has to be ensured, Pure Resin based Chemical anchoring system. |
| 176 | S&F in renewal air termination single pointed Aluminium rod 12 mm dia, 300 mm long for lightening conductor. |
| 177 | S&F in renewal test point terminal block made of gun metal or phosphorus bronze size 75x75x25 mm drilled and screwed including 3 nos. 8 mm dia 25 mm long hex. Head screw for fixing in wall complete. |
| 178 | S&F in renewal GI pipe medium grade of size 40 mm bore for erection of lightening conductor complete as required and directed by Engineer-in-Charge. |
| 179 | S&F in renewal Aluminium strip 25 x 3.15 mm with saddles and fixing screw etc. for roof conductors above ground & wall/batten or recessed or buried in ground all as directed by Engineer-in-Charge. |
| 180 | S&F in renewal 32x 6 mm dia galvanised iron Strip Earthing continuity conductor or main earthing lead fixed to wall on batten or recess or chases or burried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing as 32x 6 mm dia galvanised iron Strip complete all as specified and directed by Engineer-in-Charge. |
| 181 | M&L in renewal earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) vertically, with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead GI Strip 32x6 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of MES Schedule Part-I connecting to earthing test. Testing on completion with and including necessary excavation and earth work in any type soil, earth lead connected to earth test point & to main switch board etc with & including adequate quantity of charcoal dust and common salt, test point, PCC (1:3:6) type C-1 (using 20mm graded BT stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, internal surface of concrete shall be given 10mm thick plaster in CM 1:4, pre cast RCC (1:2:4) type B-1 (using 20mm graded BT stone aggregate) 40mm thick cover, reinforced with 8mm dia deformed or TMT bars 3 Nos both way with 12 mm dia round bar handle, GI medium grade watering pipe 20 mm dia with funnel and wire mesh and 15mm dia GI medium grade earth lead protection pipe including provn of earth test point made of 50 x 5 mm MS Flat in 'D' shape 500 mm legth grouted in wall complete all as specified and directed. |
| 182 | M&L in renewal modular plate and provising of new modular plate of different size with flush metel box including fixing ,the existing modular switchs , modular socket ,modulare regulator and refixing them in new board |
| 183 | M&L in renewal White cover plate with frame but 2/3/4 module |
| 184 | M&L in renewal White cover plate with frame but 6/8/12 module Total in Figures 23 0.0 INR Zero Only Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
