|
| 1 | Overhauling, cleaning, oiling, greasing, painting with approved enameled paint inner side and outer side and water tank, after removing from installed position of Desert Cooler complete with providing and fixing wood wool pads with suitable size G.I/Steel wire mesh, and re install the same in original position etc as required. (MR) |
| 2 | S/F of heavy duty submersible pump suitable for sizes upto 24'' desert cooler i/c connection,testing etc. as reqd as approved by Engineer in charge (MR) |
| 3 | S/F of heavy duty desert cooler motor kit suitable upto 24\\" size desert cooler suitable to operate on 220/240 volts ,50Hz AC supply i/c connection,Testing etc as reqd.) |
| 4 | S/F of Complete Body for cooler size of 26\\" x 26\\" x 32\\", i/c tank of size 26\\" x 26\\" x7\\", made out of 22 SWG G.I. sheet with 24 gauge GI shutter i/c six way direction front grill |
| 5 | Supply and fixing of Heavy duty GI Desert cooler complete tank of size 26\\" x 26\\" x 7\\" made out of 22 SWG G.I. sheet etc complete as required as approved by Engineer in charge (MR) |
| 6 | Supply and fixing of Heavy duty GI complete front grill with six way direction , made out of 22 SWG G.I. sheet suitable for upto 26\\" Desert cooler etc complete as required. (MR) |
| 7 | S/F of desert cooler three leaf aluminium blade suitable for motor kit of desert cooler of upto 24\\" size complete and suitable to operate on 220/240 volts , 50Hz AC supply i/c dismantling of old damaged blade and connection,testing etc as reqd as approved by Engineer in charge (MR) |
| 8 | Providing & fixing 1/2\\" PVC flexible water pipe in the existing desert cooler complete as reqd. (MR) |
| 9 | S/F of Shutter/ Side Parda(l nos) made out of 24 gauge Gisheet |
| 10 | Providing & fixing of 1/2\\" PVC elbow and PVC water distributer of cooler sutable for 1/2\\" PVC pipe in the existing desert coolers complete as reqd.(MR) |
| 11 | S/f of 4 mfd condenser for Desert cooler suitable to operate on 230 Volt 50HZ single phase AC Supply etc as reqd. (MR) |
| 12 | S/I/T/C of Desert Cooler 20\\" (500 mm) fan size desert cooler with size measuring 26\\"x 26\\" x 32\\" with minimum 18\\" exhuast fan(450 mm sweep size) heavy duty GI sheet of 20 gauge, heavy side pannel fitted and with heavy duty cooper winding, three speed, cooler fan motor of ISO certified, MSME, NSIC,ISI Mark with heavy wood wool pads, heavy duty submersible pump and heavy six way metal direction grill with good quality 3 leaf aluminium blade type, moulded plug lead cooper wire etc as reqd, with ISI mark( MR) as approved by engineer in charge |
| 13 | Providing and fixing of 1.5 sq.mm 3 core PVC insulated,FR PVC round sheathed,copper conductor(flexible)industrial cable,1100 volt, conforming to IS suitable to work on 220/240V , 50Hz AC supply i/c connection, testing etc. as reqd. (MR) |
| 14 | Providing and fixing of 15/16 amp 3 pin plug top heavy duty suitable to work on 220/240V , 50Hz AC supply single Phase i/c connection, testing etc. as reqd. (MR) |
| 15 | S/F M-seal for water leakage in desert cooler water tanks each pkt 25gms Wt. etc as approved by engineer-in-charge.(MR) |
| 16 | Providing and fixing of stainless steel chain to be wrapped around desert cooler body for safety purpose with dia 5 mm and length of 4 meters etc as reqd |
| 17 | supply and fixing pf MS angle Cooler Stand of dimension 25\\" x 25\\" *30\\" (LXB XH) |
| 18 | Rebate on submersible pump |
| 19 | Rebate on motor kit |
| 20 | Rebate on desert cooler Body Please Enable Macros to View BoQ information |
