|
| 1 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead For thickness of tiles 10 mm to 25 mm |
| 2 | Dismantling of flushing cistern of all types(C.I/PVC/ Vitreous china) including stacking of useful materials near the site and disposal of unserviceable materials within 50 meters lead |
| 3 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in charge 1:3:6 or richer mix (i/c equivalent design mix) |
| 4 | Dismantling/ removing of old damaged G.I/ C.I/ PVC pipes including taking out the pipes manually including stacking of pipes within 50 mtrs lead (upto 150mm dia) |
| 5 | Construction of brick masonry platform for indian W. C including all carriages of material involved complete as directed by EIC. |
| 6 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 7 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately)Silver wood |
| 8 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). Second kail wood (30mm thick) |
| 9 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction ofEngineer-in-charge : Second class Kail wood (35mm thick) |
| 10 | 15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 fine sand) |
| 11 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 12 | Providing and fixing of 12mm thick imported wooden paneling (T&G) including cost of 12mm thick ply wood base, touch wood polishing and nails etc all complete. |
| 13 | Providing and fixing of 40x40mm size wooden cornice all complete as directed by EIC |
| 14 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shades,in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete Size of tile 600x600 mm |
| 15 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 16 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete In colour such as White, Ivory, Grey, Fume Red Brown |
| 17 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias, stairs, corrodors and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:3 (1 cement : 3 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour or shade (Area of slab over 0.5 sqm) |
| 18 | Providing and fixing of 3.5mm thick ordinary Glass panes for openings of doors and windows including wooden beading. |
| 19 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick Particle Board 12mm thick Pre-laminated particle board with decorative lamination on both sides, Grade I, Type II IS : 12823 marked |
| 20 | Providing and fixing of Aluminium hardware items including screws etc complete Job as directed by EIC |
| 21 | 200mm long Aldrop |
| 22 | 150mm Handle |
| 23 | 125mm Handle |
| 24 | Tower bolt 150mm |
| 25 | Tower bolt 100mm |
| 26 | Butt Hinges 125mm |
| 27 | Butt Hinges 100mm |
| 28 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc.complete. |
| 29 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete 2 mm thick |
| 30 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade, one or more coats on old work. |
| 31 | Finishing walls with Acrylic smooth exterior paint of required shade Old work (two or more coats applied @ 1.67 liters/10sqm on existing cement paint surface) |
| 32 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work. |
| 33 | Providing and fixing of following PPR pipes/ fittings of approved brand Prince, Reliance, Vectus or equivalent (Heavy duty) including trenching and refilling all complete. |
| 34 | 25mm Pipe |
| 35 | 25mm Union |
| 36 | 32mm Pipe |
| 37 | 32mm Union |
| 38 | Providing and fixing of following PVC pipes/ fittings of approved brand )Prince Tye-B) including trenching and refilling all complete |
| 39 | 100mm Pipe |
| 40 | 100mm plain bend |
| 41 | 100mm DoorJunction |
| 42 | 100mm Collar |
| 43 | 100mm floor trap |
| 44 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 45 | Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931 |
| 46 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-incharge. |
| 47 | Providing and fixing PTMT grating of approved quality and colour Circular type 100 mm nominal dia. |
| 48 | Providing and fixing C P Cup of approved quality and make as directed by EIC. |
| 49 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour 600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms. |
| 50 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with a minimum distance of 37 mm from wall face with concealed fittings arrangements of approved quality and colour, weighing not less than 88 gms. |
| 51 | Providing and fixing un plasticized P.V.C. connection pipe with PTMT nuts, collars and bush of approved quality and colour 15 mm nominal bore with 45 cm length |
| 52 | Providing and fixing of C P Wall Mixer of approved quality (Hindware, Jaguar, Kerovit or equivalent make as approved by EIC). |
| 53 | Providing and fixing PTMT soap dish holder having length of 138mm,breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms. |
| 54 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 55 | Providing and fixing of C P Sink Mixer of approved quality (Hindware, Jaguar, Kerovit or equivalent make as approved by EIC). |
| 56 | Providing and fixing of C P Basin Mixer of approved quality (Hindware, Jaguar, Kerovit or equivalent make as approved by EIC). |
| 57 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 58 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflowpipes but without fittings and the base support for tank |
| 59 | Providing and fixing of water heater Geyser of approved make like Venus, Jupiton, Racold or equivalent make including all necessary fittings complete |
| 60 | 50 Liter |
| 61 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps. |
| 62 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
| 63 | Providing and fixing of brick masonary manholes 300mmx300mm incluidng PVC cover with frame, plaster and concrete base all complete. |
| 64 | Supplying fixing installtion and commissioning of 1.00 HP water mortor of approved brand like Crompton Greaves, KSB or equivalen including all necessary fittings and connections complete. |
| 65 | Providing & Fixing of Exhaust fan (200mm dia) of approved make like (Havells, Orient, Crompton) including all necessary fittings all complete Job. |
| 66 | Providing & Fixing of Ceiling fan (1200mm dia) of approved make like (Havells, Orient, Crompton) including all necessary fittings all complete Job. |
| 67 | P/F Hi rib profiled Pre-colour coated sheets of eco-friendly colour comprising 0.50mm thickness for roofing including hooks, bolts and nuts 8mm dia or with PVC limpet washers complete upto any pitch in horizontal/ vertical or curved surfaces excluding the coat of purlins, rafters and trusses and including cutting to size and shape wherever required as directed by EIC all complete. |
| 68 | Carriage of material by mechanical transport including all loading / unloading complete |
| 69 | Sand for Aveg. lead of 20 Km |
| 70 | Crushed Stone Aggregates Aveg. lead of 20 Km |
| 71 | Providing and fixing of following types of switches, sockets, with Gang box and allied accessories including dismantling of existing switches and sockets with terminations as required. |
| 72 | 6A switch only piano type |
| 73 | 6A socket only piano type |
| 74 | 16 A piano switch socket combined with PVC box |
| 75 | 6 A Modular switch |
| 76 | 6 A Modular socket |
| 77 | 16 A Modular switch socket combined with gang box |
| 78 | Rewiring for light point/ fan point/ exhaust fan point/ call bell point including 1.5 sq.mm FR PVC insulated copper conductor single core cable as required for restoration of the supply in existing surface / recessed steel/medium class PVC conduit |
| 79 | Group A |
| 80 | Group B |
| 81 | Group C |
| 82 | Supplying and drawing following sizes of FR PVC insulated copper conductor, single core cable in existing surface/ recessed steel/ medium class PVC conduit as required (as per Schedule) Finolex/Polycab/Havells/Anchor/KEI make |
| 83 | 2 x 2.5 Sqmm |
| 84 | 2 x 4 sqmm |
| 85 | 2 x 6 sqmm |
| 86 | 2 x 10 sqmm |
| 87 | Supply and fixing of following sizes moduler base Plate and cover plate on existing modular metal boxes etc as required for moduler swtiches |
| 88 | 12 Modular |
| 89 | 8 Modular |
| 90 | 6 Modular |
| 91 | 4 Modular |
| 92 | Providing and fixing of following type of MCB's/switch gear of 10 KA or more capacity series including testing and necessary terminations. |
| 93 | 63 A DP |
| 94 | 32 A DP |
| 95 | 6A-32A MCB's |
| 96 | Providing and fixing of following MCB distribution boxes double door with inbuilt tinned copper heavy duty bus bars for earth, earth, and jumpers of proper current ratings. |
| 97 | 16 way SPN |
| 98 | 08 way SPN |
| 99 | Providing and fixing of LED lights of following type including necessary terminations as required. |
| 100 | T-5 LED 4' long 20 watt |
| 101 | T-5 LED 2' long 9 watt |
| 102 | 12 watt concealed/ surface LED panel lights |
| 103 | 12 Watt LED Lamps |
| 104 | Providing and fixing of fan dimmers of Piano type heavy duty heavy duty. |
| 105 | Providing and fixing of two modular stepped type fan dimmers including necessary terminations as requried |
| 106 | Providing and fixing of 48\\" Sweep ceiling fan, 3 blade with allied accessories complete including necessary terminations |
| 107 | Providing and fixing of Angle/straight holders including terminations |
| 108 | Providing and fixing of Phenolic sheets of desired shapes and sizes incluting cutting, finishing, drilling etc. |
| 109 | Providing and fixing of 400mm Sweep wall fan with allied accessories complete including necessary terminations |
| 110 | Providing and fixing of exhaust 150mm Shutter type including terminations as required |
| 111 | Providing and fixing of following sizes of PVC battens along the wall or ceiling including dismantling of existing damaged battens. |
| 112 | 1\\" wide surface batten 6 feet long |
| 113 | 1.5\\" wide surface batten 6 feet long |
| 114 | Supply and laying of following unarmoured, PVC insulated, aluminium cables. |
| 115 | 25 sqmm 2- core |
| 116 | Supply,assembling,installation of (as per approved sample) 30 watt LED flood Light powder coated, pressure die cast aluminium housing with heat sink IP 66 protected, with i/p AC90-300V. Please Enable Macros to View BoQ information |
