|
| 1 | Dismantling of plain or corrugated sheeting any gauge, thickness including Nainital or similar pattern roof coveringcomplete all as specified and directed |
| 2 | S & F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed |
| 3 | S&F Pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed |
| 4 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets complete all as specified and directed |
| 5 | S&F for aluminium anodised snap grid frame work of size 605mm x 605mm frame work for ceiling with aluminium tee section of size 23.5mm x 26.4mm x 1.4mm thick and aluminium angle section of size 36.5mm x 25mm x 1.4mm thick, for false ceiling including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long including 4 mm thick non asbestos E-board (plain), HSPC fixed to frame including providing two coats of distemper oil emulsion complete all as specified and directed. |
| 6 | Taking down chowkats or frame, n. exc 1.5 sqm each with shutters (without taking off shutter from the frame) complete all as specified and directed |
| 7 | Taking down chowkhats or frames with shutter (without taking off shutter from the frame) exe 1.50 & n.exc. 4 sqm in each complete all as specified and directed |
| 8 | Taking down and Refixing shutter in same opeining of any description exc 1 sqm but n exc 2 sqm each complete all as specified and directed |
| 9 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed |
| 10 | S&F solid PVC moulded door frame of size 50mmx47mm made out of 5mm, single side prelam PVC sheet used and edges will be painted to match with printed to match with prelam sheet, reinforced with MS square tube & fixing in opening including hold fast complete all as specified and directed |
| 11 | S&F factory made solid PVC Moulded door shutter 28 to 30mm thick (Stiles) with 2,4 or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on front face & 2 mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification and directed. |
| 12 | S&F 75 mm size stainless steel butt hinges medium weight cold rolled complete all as specified and directed |
| 13 | Supply and fix 150mm long aluminium handles, cast type, anodised complete all as specified and directed. |
| 14 | Supply and fix 150mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and directed. |
| 15 | S&F pressed steel door frame 125x60 mm for doors with one or more rebates including necessary fixing lugs hinges lock strike plates comlete as specified and directed (PCC filling of hollow section measured and paid seprately) complete all as specified and directed |
| 16 | M&L Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 or E-165 complete all as specified and directed |
| 17 | Supply and fixing of Anodised aluminium sliding window, three track including following components / specification complete all as specified and directed. (i) Thickness and weight per metre length of aluminium frame and section of shutter all as shown on drawing. (ii) All vercal/ horizontal joint shall be of extruded aluminium section so as to avoid any play between jointed members. (iii) all other accessories such as jointing cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading, srews, etc. (iv) Stainless steel wire cloth, 036 mm nominal dia of wire and average width of aparture 1.40 mm and fixed with stainless steel wire staples, etc. (v) Sheet glass 4 mm thick selected quality and glazing with oil putty or fixed with wooden beads in square not exceeding 0.5 Sqm in each pane (vi) Rest all as specified in drawing no CEZ/2015/TD/007 Sheet no 1R/5, 2R/5, 3R/5, 4R/5, 5R/5. |
| 18 | S&F 35mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and directed |
| 19 | S & F 35 mm thick, 2nd class hardwood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers all complete as specified and directed. |
| 20 | S & F 35mm thick, 2nd class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc complete as specified and directed . Sizes of members of shutters as specified in SSR Part I, Section -8, clause 8.24 (a) complete all as specified and directed |
| 21 | Supply and fix butt hinges 100mm long cold rolled medium weight complete all as specified and directed. |
| 22 | Supply and fix 150mm long mild steel pressed handles, oval type, stove enameled black complete all as specified and directed. |
| 23 | S & F mild steel tower bolts, stove enamelled black, with bright bolt and fixed, length of bolt 200mm longcomplete all as specified and directed |
| 24 | S & F mild steel tower bolts, stove enamelled black, with bright bolt and fixed, length of bolt 150mm long complete all as specified and directed. |
| 25 | Supply and fix 250mm long mild steel sliding door bolts, plate type, stove enamelled black with bright bolt not less than 12mm dia with and including minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed. |
| 26 | M&L for preparation to new or previously untreated steel surface of any description,over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of zinc chromate primer complete all as specified and directed |
| 27 | M & L for preparation of new untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of pink primer complete as specified and directed. |
| 28 | S & F in repair Wire netting of stainless steel wire 1.4mm dia and 12mm Size of mesh is fixed with tinned tacks of stainless steel wire staples complete as specified and directed. |
| 29 | S & F Wire netting of stainless steel wire 1.4mm dia and 12mm Size of mesh is fixed with tinned tacks of stainless steel wire staples complete all as specified and directed |
| 30 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 31 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed |
| 32 | Demolition of stone slabs or tiles of any description or thickness as in floors, pavings, aprons, pathway etc laid dry or laid dry and pointed complete all as specified and directed |
| 33 | M & L for 25 mm thick PCC type B0 1:2:4 (using 12.5 mm graded stone aggregate) as in leveling layer complete all as specified and directed |
| 34 | M&L for Non skid ceramic tiles 7 to 8mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm 7mm thick coloured tiles in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including screed bedding 15mm thick in CM 1:6 complete all as specified and directed |
| 35 | M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 15mm thick screed bed or bedding layer of cement morter (1:6) for laying of floor finishes complete all as specified and directed. |
| 36 | M&L for Non skid ceramic coloured tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm (400X400X7mm) in floor, over and including 20mm thick screed bed in CM 1:4 on floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade complete all as specified and directed. |
| 37 | M&L for glazed ceramic tiles in vertical surface 300x450x7mm thick in dado over and including 10mm thick screed bed in CM 1:4 on walls set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade complete all as specified and directed. |
| 38 | M&L Laquer coated Chequered cement concrete coloured tiles 30cmx 30cmx25mm thick set jointed in neat cement slurry and pointed in grey cement mixed with pigment to match the shade of tiles over and including 15 mm thck cement screed in CM 1:6 complete all as specified and directed. |
| 39 | M & L 75 mm thick PCC type D-2 1:4:8 ( using 40mm graded stone aggregate) as in sub base of floor complete all as specified and directed. |
| 40 | Material and labour for Machine cut kota stone slab flooring 20 to 25mm thick size not less than 22\\" x 22\\" laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab over and including 20mm thick cement screed bed in cement mortar 1:3 including rubbing and mirror polishing complete all as specified and directed. |
| 41 | Material and labour for kota stone slab 20 to 25mm thick in riser of steps, skirting, dado and pillars laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab over and including 10mm thick rendering in cement mortar 1:3 including cutting, moulding outer edges, rubbing and mirror finish polishing complete all as specified and directed. |
| 42 | S&F for Machine pressed precast concrete coloured interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and pigment laid over sand cushing complete all as specified and directed. Note :- Sand cushioning will measured and paid seperately. |
| 43 | Supply and laying of sand including spreading, levelling and ramming in layers n.exc. 25 cm thick in each layer complete all as specified and directed. |
| 44 | M&L for cement concrete 75mm thick 1:2:4 type B-2 using 40mm graded stone aggregate as in pathways/hardstanding laid in alternate ways, each panel not exceeding 3.00 Sqm finished the surface even and fair without using extra cement and joint to be filled with Bituminous mastic filling including necessary form work complete all as specified and directed. |
| 45 | M & L for 75 mm thick plain cement concrete 1:3:6, type c-2 (using 40mm graded stone aggregate) as in plinth protection etc, finishing cement concrete surface even and smooth with out using extra cement including making joints with bitumastic filling in proportion of bitumen and sand (1:2) complete all as specified and directed. |
| 46 | M&L for PCC 1:2:4 type B1 using 20mm graded stone aggragate as in coping/bed blocks, bed plates etc including weathering slightly rounded or chamfered angles and throating making groves for fixing of man hole cover including necessary form work complete all as specified and directed. |
| 47 | S&F in repairs for MS grating CP 75/100mm dia, with hole for waste pipe of approved make including fixing in CM to floor/nahani traps etc complete all as specified and directed. |
| 48 | S & F in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 49 | S & F in repairs Waste coupling of PTMT (half or full threaded) (40mm-60 gms) for sink complete all as specified and directed. |
| 50 | Taking up or down 15mm bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed. |
| 51 | Refixing 15mm bore old steel tubing and connection in new or old position (wall, ceiling, floors, etc.) complete all as specified and directed. |
| 52 | S & F steel tubing 15mm bore medium grade galvanised with all fittings and fixed complete to wall, ceilings or laid in floors complete all as specified and directed. |
| 53 | Taking up or down steel tubing and connections including cleaning if refixing required for 20 mm bore of pipe complete all as specified and directed. |
| 54 | Refixing 20mm bore old steel tubing and connection in new or old position (wall, ceiling, floors, etc.) complete all as specified and directed. |
| 55 | S & F steel tubing 20 mm bore medium grade galvanised with all fittings and fixed complete to wall, ceilings or laid in floors complete all as specified and directed. |
| 56 | M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 for concealed water tubing and making good , cutting not exc 10cm girth complete all as specified and directed. |
| 57 | S & F in repairs 15 mm bore Bip taps, Chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 58 | S & F in repairs, 15 mm bore, bib tap, PTMT with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 59 | S & F in repairs, stop valves, 15 mm bore cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions as complete all as specified and directed. |
| 60 | S & F in repairs, 15mm bore, PVC connection pipe 450mm long with PTMT nuts at both ends complete all as specified and directed. |
| 61 | S&F in repair health faucet cast copper alloy with push button flexible steel pipe with PVC lining of 1 mtr long suitable for 15mm bore pipe complete all as specified and directed. |
| 62 | S & F in repairs, 10 litres capacity PVC valveless syphonic action type, flushing cistern (ISI marked), low level with inlet, ball valve, float bracket & flush pipe complete all as specified and directed. |
| 63 | S & F in repairs Vitreous china wash basin, white,flat back, size 550 x 400 mm with brackets,excluding pillar cock 15 mm bore CP, PVC connection of 450 mm long including PVC (HDPE) 32 mm bore waste pipe, brass couplings 32 mm CP etc complete all as specified and directed. |
| 64 | S & F in repairs, 15 mm bore pillar taps, cast copper alloy, chromium plated, fancy type with capstan heads, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipecomplete all as specified and directed. |
| 65 | S & F in repairs, swivel shower rose of PTMT, 15mm bore (minimum weight 40 gms) including shower arm 15mm size, 195mm long with bend of 45 degree with flange of PTMT any colour (minimum wt 40 gms) complete all as specified and directed. |
| 66 | S & F in repairs for 100 mm dia UPVC Nahani trap , with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete complete all as specified and directed. |
| 67 | S & F in repairs, vitreous China squatting pan, 'Orissa' pattern, size 580mm x 440 mm, white with integral foot rest and 'P' or 'S' trap, including provision of lime concrete bedding, connection to trap and flushing pipe etc complete including making good to disturbed surfaces of floor to match with existing specifications complete all as specified and directed. |
| 68 | S & F vitreous china Semi pedestal pattern (Anglo Indian type) white connection to trap 'P' or 'S' and flush pipe etc including seat cover and making good to disturbed surfaces of floor by filling with PCC 1:4:8 type D-2 to match with existing including taking down the existing old one complete all as specified and directed. |
| 69 | S & F in repairs vitreous china pedestal pattern white connection to trap 'P' or 'S' and flush pipe etc seat cover and making good to disturbed surfaces of floor by filling with PCC 1:4:8 type D-2 to match with existing including taking down the existing old onecomplete all as specified and directed. |
| 70 | Supply and fixing 500 Litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. including taking down existing water tanks complete all as specified and directed. |
| 71 | S&F in repair top cover for water storage tanks ranging from 500 to 1000 liters, made from heavy-duty plastic includes twist lock,snp fit or screw lock and the colour/shape of cover shall be matching with the existing tank's colour complete all as specified and directed. |
| 72 | S & F in repairs, 20 mm bore, Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 20mm-210 gms) complete all as specified and directed. |
| 73 | Taking down cement plaster on brick or stone walls, etc, including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 74 | M&L for 15 mm thick cement plaster in CM (1:4) on wall ( with approved water proofing compound) on fair faces of brick work incl finished even and smooth without using extra cement complete all as specified and directed. Note: 1. WPC @ 2% of cement, will be paid separately.2. The rate quoted by contractor is deemed to be included necessary scaffolding and formwork as required upto 7.00 Mtr height building. |
| 75 | M & L rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished the surfaces even and smooth without using extra cement complete all as specified and directed. |
| 76 | M & L 5 mm thick rendering in cement mortar 1:3 on concrete surfaces as in ceilings (sunshade, chajja etc) and finished the surfaces even and fair without using extra cement complete all as specified and directed. |
| 77 | M&L 15mm plaster with polymer modified mortar fortified with SBR(Nito Bond SBR 45) in proportion 1:3 by weight 5 litr Nitobond SBR 45 added to 50kg cement with 13 litr water and finished surfaces to existing adjoining surface of ceiling, columns, beam and like etc complete all as specified and directed |
| 78 | M & L for preparing newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed. |
| 79 | M & L for preparing new plastered surfaces of ceiling and applying three coats of white wash complete as specified and directed. |
| 80 | M & L for applying two coats of distmper oil emulsion over coat of primer including wall care putty on walls after preparing surfaces of walls on newly plastered wall surfaces including preparation of surfaces complete all as specified and directed. |
| 81 | M&L for Frrming 12mm thick expension joints filled with preformed bituminous filler and top 30mm primed and sealed with sealing compound grade `A`in 100mm thick hardstanding complete all as specified and directed. |
| 82 | Demolition of brick work built in cement mortar complete all as specified and as directed complete all as specified and directed. |
| 83 | M & L for brick work with sub class 'B' bricks straight or curved in plan exc 6 mtr mean radius built in CM (1:4) using old size bricks complete all as specified and directed. |
| 84 | M & L for brick work with sub class -B old size bricks, straight or curved on plan to any radius in half brick thick wall built in CM 1:6 complete all as specified and directed. |
| 85 | M & L for PCC typeC-1,1: 3:6 (20mm graded stone aggt) for cills,hold fast filling of hollow of pressed steel door frame etc complete all as specified and directed. |
| 86 | S & F MS framed work as in doors / gates of angle or other section with gusset plates, rails, braces, etc., complete drilled for fixing of steel sheeting or other covering, using steel Fe - 410W (Gde-E-250) quality 'B. Door etc., to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing complete all as specified and directed. |
| 87 | M&L for water proofing treatment on RCC roof etc. comprising with the following operation & as specified herein below:- (a)Taking down existing old tarfelt, bituminous compound including cleaning & removing debris to a distance exc 100 m n.exc.250m. (b) M&L 25 thick cement concrete type B0 1:2:4 (12.5 mm graded aggregate) finished even and smooth. (c) Cutting out cracks to V-section in existing roofs or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight). (d) M&L for 20 mm thick screed bed in cement mortar 1:4 finished even and smooth.(e) Preparing & cleaning of fully dried cement plastered surface. (f) Applying one coat of cold bituminous primer to the plastered surface @ 0.25 liters per sqm conforming IS-3384. (g) A layer of APP based polymeric membrane 3mm thick (minimum) weighing 3.5 kg per sqm reinforced with polyester non woven fabric (weighing not less than 160 gms/sqm) shall be applied over bituminous primer as specified above. Application of polymeric membrane shall be by torch application. The over lap shall be minimum 100 mm on transverse direction and 75 mm in longitudinal direction. (h) One coat of aluminium paint over APP membrane @0.11Kg/Sqm.Note:- Prior to execution of the APP Membrane works, leak proof test shall be done by ponding water on roof slab to minimum depth of 25 mm. The entire roof slab shall be flooded with water for 48 hours. The necessary barrier shall be made to make feasible to stagnate water for 48 hours on roof slab complete all as specified and directed. |
| 88 | M&L for special treatment for sunken portion of WCs/Bath & toilet executed in following stage:- Stage1:- Demolition of wc including lime concrete and cemennt concrete etc and preparing of surfaces of existing sunken portion of wc`s or bath etc with wire brush to removed all loose dirts, oil grease etc including removing debries from site of work etc. Stage 2:- Providing 10mm thick plaster in CM 1:3 mixed with integral water proofing chemical of Dr Fixit Pidicrete URP or plaster seal of STP Ltd in the proportion/quantity all as per manufacturere`s instructions. Stage 3:- Apply Dr. Fixit Premeseal primer or equivelent of STP Ltd (and allow to dry for 8 hrs) all as per manufacturer`s instructions. Stage 4:- Apply two coats of water proofing elastomeric coating system of Dr Fixit Raincoats with DFT 100 micron or shilicry 215 of STP (The surfaces after painting one coats shall be allowed to dry for 6 hrs before next coats) Stage 5:- Rendering 10mm thick in CM 1:3 mixed with integral water proofing chemical of Dr Fixit Pidicrete URP or plaster seal of STP Ltd in the proportion/quantity all as per manufacturere`s instructions. Stage 6:- All CI joints shall be filled with mixture of cement fine sand and plaster seal of STP Ltd or Dr. Fixit pidicrete URP all as per manufacturer`s instructions. Stage 7:- Making holes in walls and fixing 600mm long 40mm dia medium grade GI spouts for draining of excess water if any. Stage 8:- Carryout ponding testfor 48 hrs to ensure water tighteness of repaired sunken portion and filling of sunken portion for cement concrete Type E2, 1:5:10 using 40mm graded stone aggregate as in lean concrete complete all as specified and directed. Note:- only plan area shall be measured for payment under this items. (b) Depth of suken portion of WC`s/ bath shall be upto 35 CM which is to be taken into account while coating the rate against this item. (c) The rate shall be quoted by contractor shall be deemed to be included for all the horizontal and verticl treated surface of sunken portion of WC`s/baths. |
| 89 | M& L for Checking and attending to Plumber complaints like no water supply, water leakage from bib taps, stop cock, pillar taps, flushing cisterns, wash hand basins, urinal, wall mixer/basin mixer, angle valve, concealed valve,shower rose , health faucet & jet, float valve, of any type & size or any other water supply fittings/fixtures incorporated in plumbing works any where in the bldgs which is causing obstruction to water supply in area & requires plumbing including carrying out minor repair such as replacement of washers, check nuts, tightening of fittings of flushing cistern or any other repair not mentioned herein before etc using petty materials like washers, thread (soot), Teflon tape, M-Seal, screws (any size), nails (any size) to make water supply/plumbing lines & fiittings/fixtures functional and leak proof to the satisfaction of the occupants/ users complete all as directed.Note : (i) The rate of above mentioned item incorporates use of any materials & equipment used for completing the complaints on time to the satisfaction users/occupants. (ii) Contractor or his authorised representative shall collect such type of complaints mentioned here in above from complaint cell at 8.30 AM on daily basis except Sunday & Holiday & submit the completion of complaints on the next day duly signed by the users/occupants. No extra payment shall be made on account of collection of complaint and submission of complaints . (iii) Complaints must be completed with in 24 hrs without any fail otherwise recovery shall be made double the market rate to the contractor. (iv) Any items required to be replaced shall be paid under respective items and in that case this items shall not be measured and paid.That complaint should also be completed within 24 Hrs without fail. |
| 90 | S & F in repair PVC (SWR) pipes single sockets, in any length with rubber ring joints, laid in ground or floors 75mm dia complete all as specified and directed. |
| 91 | S & F in repairs PVC (SWR) pipes single sockets, in any length with rubber ring joints, laid in ground or floors 110mm dia complete all as specified and directed. |
| 92 | S&F in repairs 110mm dia PVC (SWR) pipes single sockets, in any length with rubber ring joints, fixed to walls with MS clamps as per site requirement complete all as specified and directed. |
| 93 | S&F in repairs 75mm dia PVC (SWR) pipes single sockets, in any length with rubber ring joints, fixed to walls with MS clamps as per site requirement complete all as specified and directed. |
| 94 | S & F in repairs 110 mm bore, PVC (SWR) bends of any radius complete all as specified and directed. |
| 95 | S&F in repairs PVC (SWR) bends 75mm dia any radius complete all as specified and directed. |
| 96 | S&F PVC(SWR) Vent cowl 75mm dia complete all as specified and directed. |
| 97 | S&F PVC(SWR) Vent cowl 110mm dia complete all as specified and directed. |
| 98 | S & F in repairs, PVC (SWR) 75 mm dia, floor trap, plain with granting including jointing to waste pipe with solvent cement complete all as specified and directed. Please Enable Macros to View BoQ information |
