|
| 1 | Demolition of brick work or stone masonry built in cement mortar incl all quoins arches pillars etc complete all as specified and as directed. |
| 2 | Demolition of cement Concrete in ground floors andpavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed. |
| 3 | M&L Cement Concrete (1:4:8) (40mm graded aggregate) in Foundations, Filling and Mass Concrete including use and waste Formwork as ordered/required at Site, complete all as specified and as directed. |
| 4 | M&L Brick Work with Sub-Class ‘B’ Bricks (with modular size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar (1:6) ,complete all as specified and as directed. |
| 5 | Dismantling Bricks (laid Flat in Floor or laid on Side Walls of Brick Drains, Channels), etc., Bricks laid, bedded and pointed in any Cement Mortar, complete all as specified and as directed. |
| 6 | M&L Bricks, sub class 'B' laid flat, in floors, old size bricks Bedded and Jointed in Cement Mortar (1:6) and Pointed in Cement Mortar (1:3), complete all as specified and as directed. |
| 7 | M&L Brick Work with size Sub-Class ‘B’ Bricks, laid on Edge as Side Walls of Brick Drains in Slope, Bedded and Jointed in Cement Mortar (1:6) and Pointed in Cement Mortar (1:3), complete all as specified and as directed. |
| 8 | Brickwork with sub- class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and as directed. |
| 9 | Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc.complete all as specified and as directed. |
| 10 | M&L for providing precast cement concrete louvres and jallies 35 mm thick (measured solid) including all mouldings but excluding frame in cement concrete (1:2:4) type B0 using 12.5 mm graded stone aggregates and set in cement mortar (1:4) complete all as specified and as directed. |
| 11 | M & L for PCC (1:2:4) type B-1 using 20MM graded aggreagte as in coping bed block etc complete all as specified and as directed |
| 12 | M&L for PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in sub base flooring 25 mm thick surface finished even and rough to receive the topping layer complete all as specified and as directed. |
| 13 | M&L for rendering on fair faces of brick work or concrete surface of wall 15mm thick in CM (1:4) and to be finished even and smooth with out using extra cement complete all as specified and as directed |
| 14 | M&L two coats of cement base paint over a coat of primer on wall surface including preparation of surface. complete all as specified and as directed. |
| 15 | Dismantling floor, hearth or wall tiling incuilding cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the permises. complete all as specified and as directed. |
| 16 | Glazed ceramic coloured tiles in vertical surfaces (450x 350x 7 mm) thick set and jointed in neat cement slurry & painted in white or colour cement to match incl sreed bed 10 mm thick in CM (1:4). complete all as specified and as directed. |
| 17 | M&L Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured including Screed bed or bedding layer of cement mortar (1:6), 15 mm thick for laying floor finishes. complete all as specified and as directed. |
| 18 | M&L Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured including Screed bed or bedding layer of cement mortar (1:6), 15 mm thick for laying floor finishes incuilding cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the permises. complete all as specified and as directed. |
| 19 | M&L Heavy duty tiles (600x600x15MM) as directed by engineer in charge in floors, steps,risers etc set and jointed in Neat Cement Slurry and pointed in White Cement mixed with Pigment to match the colour of tiles over and including 15 mm thick screed bed or bedding layer in CM (1:4), complete all as specified and as directed. |
| 20 | M&L For pre-polished glazed designer ENDURA tiles/dura stone, coloured, (30cm x 30cm x 10cm) thick , set, jointed and pointed in neat cement slurry, pointed in white or coloured cement to match in floors over 15mm thick Screed in (1:4) including dismantling of old dura stone tiles complete all as specified and as directed. |
| 21 | S&F and laying of Polythene film, black, 50micron laid in floors complelte all as specified and as directed. |
| 22 | M&L Sand filling under floors or in foundations including watering and conosoldiation. complete all as specified and as directed. |
| 23 | M&LHardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered andrammed to a true surface broken stone or boulder. complete all as specified and as directed. |
| 24 | M&L for 100 mm thick Cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregate as in sub base complete all as specified and as directed. |
| 25 | M&L for 75 mm thick Cement concrete (1:3:6) type C-2 using 40 mm graded stone aggregate as in sub base complete all as specified and as directed. |
| 26 | M&L for 50 mm thick PCC (1:3:6) Type D-2 using 20mm graded stone aggregate as in subbase/footpath inclcessary form work, complete all as specified and as directed. |
| 27 | M&L for 75mm thick PCC (1:3:6) Type C-2 using 40mm graded stone aggregate in pavement/hard-standing laid in alternative panels, surface finished even and fair including necessary form work, complete all as specified and as directed. |
| 28 | M&L for Pre-polished Chequered cement concrete tiles (30cm x 30cm x 25mm) thick, set, jointed and pointed in neat cement slurry with grey cement and pigment in floors including 20 mm thick screed bed in CM (1:4) incl demolition of old tiles ,complete all as specified and as directed. |
| 29 | M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as specified and as directed. |
| 30 | M&L for Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as specified and as directed. |
| 31 | Demolition/Breaking up Reinforced Pipes 600mm bore (dia) & above, Jointed in Cement Mortar of any description including PCC of Packing and Haunching to Sides of the Pipes (except Bed),taking out of trenches. complete all as specified and as directed. |
| 32 | M&L reinforced cement concrete pipes class NP2 600 mm bore laid in trenches at any depth including jointing with collars and testing complete all as specified and as directed. |
| 33 | M&L Concrete bed to 600mm ID dia drain pipes including packing under, & haunching against the sides of pipes after they are laid & tested; in PCC (1:3:6) complete all as specified and as directed. |
| 34 | Demolition Reinforced Concrete of any description and in any position not otherwise specifically provided for (reinforcement cutas required to facilitate demolition). complete all as specified and as directed. |
| 35 | M&L reinforced cement concrete (nominal mix) (1:1.5:3) type A1 using 20 mm graded stone aggregate as in foundation. complete all as specified and as directed. |
| 36 | M&L reinforced cement concrete (nominal mix) (1:1.5:3) type A1 using 20 mm graded stone aggregate as in Columns, pillars, piers, posts and struts complete all as specified and directed |
| 37 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams;and similar work; vertical or to batter rough finished surface of concrete in flat complete all as specified and as directed. |
| 38 | Formwork to sides of pillars, posts, struts, piers, columns and stanchions rough finished surface of concrete in flat complete. Insquare, rectangular or polygonal complete all as specified and as directed. |
| 39 | Mild Steel TMT bar 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 40 | Mild Steel TMT bar 5mm dia and over upto and including 10mm dia as in stirrups, spacers & binders cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 41 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 42 | S & F MS framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing, quality confirming to Fe-290 (Gde-E-165) complete all as specified and as directed. |
| 43 | M & L preparing new or perviously untreated Steel and Iron surfaces of any description, over 110 CM width or girth and applying two coats of synthetic Enamel paint (First quality) orver a Red oxide Zinc chorme pimer, complete all as specified |
| 44 | Supply and fixing in repair 110mm dia PVC, soil waste drain pipe, type 'B' confirming to IS 13592-1992, single socketed, in any length with rubber rings joints or jointed with solvent cement joint, laid in trenches or in floors complete all as specified and directed (Note- Rubber rings for pipes and fittings shall be confirm to IS 5382- 1985). complete all as specified and as directed. |
| 45 | Dismantling plain or corrugated asbestos sheeting any thickness in roof covering. complete all as specified and as directed. |
| 46 | S&F pre painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws complete all as specified and as directed. |
| 47 | S&F pre painted galvatume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified incl dismantling of old steel sheets of any description. complete all as specified and as directed. |
| 48 | S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161 1979 grade St.-240 complete all as specified and as directed. |
| 49 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in & raming earth/ broken rubble mixed with earth around, in layers n. exc. 25cm, watering, & removing surplus soil to a distance n exc 50m & making good surface in soft/loose soil. complete all as specified and as directed. |
| 50 | M&L PCC in foundations, filling and mass-concrete type B2 (1:2:4) using 40 mm graded stone aggregate complete all as specified and as directed. |
| 51 | M&L for 18-20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including demoliton of stone slab complete all as specified and as directed. |
| 52 | M & L for PCC (1:3:6) type C21 using 40MM graded aggreagte as in surface channel and drains etc complete all as specified and as directed |
| 53 | Taking down wooden shutters exc 1 sqm but not exc 2 sqm and resecuring or easing & adjusting and refixing in same opening. complete all as specified and as directed. Please Enable Macros to View BoQ information |
