|
| 1 | S&F pre-painted galvalume sheet 0.50 mm thick having aluminum zinc coating 150 gsm/ sqm double ribbed trapezoidal profile steel sheet any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws complete, including dismantling of Asbestos cement (corrugated, semi corrugated, etc) sheets complete all as specified and directed. |
| 2 | S&F pre-painted galvalume sheet 0.50 mm thick having aluminum zinc coating 150 gsm/ sqm plan steel sheet in ridge any colour having tensile strength of 550 Mpa for closing gable truss suitable for profile pattern sheet fixed with self tapping screws complete, including dismantling of Asbestos cement (corrugated, semi corrugated, etc) sheets complete all as specified and directed. |
| 3 | S&F 1mm thick steel sheet eaves gutters, galvanised class 3,150 mm dia half round with rounded edges complete all as specified and directed. |
| 4 | M&L for second class hardwood plain, solid, straight chowkhat and frames wrought framed rebated on the solid, rounded on the solid or chamfered put together with glue pinned at joints complete all as specified and directed. |
| 5 | M&L for mild steel structural work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats, etc. confirming to Fe-410-W (Gde-E250) quality 'A' complete all as specified and directed. |
| 6 | M&L for suspended false ceiling comprising of non asbestos fibere cement building board 600x600x6 mm thick vinyl face, cinyl covered edges and washable metalized polyster foil backing, fixed or laid/inserted to GI frame work with screws over GI perimer channel 0.55mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm conter to centre / intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fastners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled wed of 50 mm and flange of 26 mm each with lips of 10.50 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including hangers 4 mm dia GI (upto 1200 mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40x3 mm size 60mm long complete, including dismantling of old any type of false ceiling in any thickness incl cover fillets all as specified and directed.Make ArmGyp-FB ceiling (Armstrong) model : sleet (Alpha Lite) or equivalent given in Appedix 'C'. |
| 7 | Demolition of brick work or stone/ boulder masonry work built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed. |
| 8 | M& for Brickwork with old size subclass 'B' bricks, straright or curved on plan exc 6m mean radius built in Cement mortar 1:6 complete all as specified and directed. |
| 9 | M&L for 15 mm thick rendering in cement mortar (1:6) on brick / concrete/ stone surfaces finished even and fair without using extra cement complete all as specified and directed. |
| 10 | Taking down cement plaster on brick work or stone walls, etc incl raking out joints, hacking for key, scrubbing down with water, etc and removing rubbish from site complete all as specified and directed. |
| 11 | M&L for washed stone grit plaster on exterior wall in two layers, under layer 12mm cement plaster (1:4) furrowing the under layer with scratching tool, applying cement slurry on the under layer @3 Kg of cement per square meter, top layer 15mm cement plaster (1:1/2:2)(1 cement: ½ corse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified and as directed. |
| 12 | M&L for 20 mm thick rendering on wall in cement mortar (1:6) on brick / concrete/ stone surfaces finished even and fair without using extra cement complete all as specified and directed. |
| 13 | M&L for 20 mm thick rendering on wall in cement mortar (1:4) on brick / concrete/ stone surfaces finished even and fair without using extra cement complete all as specified and directed. |
| 14 | M&L for two coats of cement base wall care putty (approx thickness 1mm) on newly plastered surface of wall as propritory work to painting including brooming down with steel wire brushes scraping down moulds moss and efflorescent salts and treating oil and greasy spots, removing of nails, making good holes , craks etc cleaning surface before application of putty and necessary rubbing of puttied surface with apropriate size of sand paper so as to make the surface truly smooth, free from all dert/ dust and ready to receive the finishing coat of paint complete all as specified and directed.Make : Birla white / JK putty/ Burger |
| 15 | M&L for two coats of water based premium acrylic smooth interior emulsion over and including one coat of interior primer on prepared surfaces of Ceiling complete all as specified and directed.Make : Asion, Burger, NerolacNote : The emulsion used shall be of approved colour by GE having silicon additive, excellent dirt pickup resistance, low VOC (less than 50), Antifungal/ Anti Algai properties. in two or more coats so as to apply emulsion not less than 1.79 litre(undiluted)/10 Sqm. Emulsion shall be diluted with water as per manufacturer's instructions(ii) Contractor shall ensure washing floors, cleaning glass , joinery , electric fitting, etc after painting work with entire setisfection of Engg-in-charge. |
| 16 | M&L for two coats of water based premium acrylic smooth exterior emulsion over and including one coat of exterior primer on prepared surfaces of wall complete all as specified and directed.Make : Asion, Burger, NerolacNote : The emulsion used shall be of approved colour by GE having silicon additive, excellent dirt pickup resistance, low VOC (less than 50), Antifungal/ Anti Algai properties. in two or more coats so as to apply emulsion not less than 1.79 litre(undiluted)/10 Sqm. Emulsion shall be diluted with water as per manufacturer's instructions(ii) Contractor shall ensure washing floors, cleaning glass , joinery , electric fitting, etc after painting work with entire setisfection of Engg-in-charge. |
| 17 | M&L for complete removal of existing treatment and applying two coats of cement base wall care putty (approx thickness 1mm) on newly plastered surface of wall as propritory work to painting including brooming down with steel wire brushes scraping down moulds moss and efflorescent salts and treating oil and greasy spots, removing of nails, making good holes , craks etc cleaning surface before application of putty and necessary rubbing of puttied surface with apropriate size of sand paper so as to make the surface truly smooth, free from all dert/ dust and ready to receive the finishing coat of paint complete all as specified and directed.Make : Birla white / JK putty/ Burger |
| 18 | Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc 15 cm thickness (below or above ground level) and removing rubbish from site complete all as specified and directed |
| 19 | M&L for PCC, type D2, 1:4:8 (using 40mm graded stone aggregate) as in foundations/ mass concrete complete all as specified and directed. |
| 20 | M&L 25 mm thick PCC (1:2:4) type B1 (using 20 mm graded stone aggregate) as in sub base of floor to receive tiles or kota stone, including demolition of old cement concrete complete all as specified and directed |
| 21 | M&L for machine cut Kota stone single piece slab (size not less than 1200x600mm)as in steps tread, windows cill, 18mm to 20 mm thick , laid over 20mm thick screed in CM (1:6), laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing and mirror polishing including dismantling of Kota stone and tiles, laid, bedded and pointed in any mortar of any description or thickness etc complete all as specified and directed. |
| 22 | M&L for machine cut Kota stone slab 18mm to 20 mm thick, as in flooring in rise of steps, skirting dado etc (size not less than 550x550mm), laid over 15mm thick cement screed base in CM (1:6), laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing and mirror polishing including dismantling of Kota stone and tiles, laid, bedded and pointed in any mortar of any description or thickness etc complete all as specified and directed. |
| 23 | M&L for grinding and polishing mirror finish of existing Kota stone slab flooring complete all as specified & directed |
| 24 | Taking down chowkhat or frame (without taking off shutter from the frame), area of opening n'exc 1.5 Sqm each, removing from the site complete all as specified and directed.Note:- Quoted unit rate includes cutting holes or dismantling of brick/stone/concrete masonary work of any discription in Jambs of existing opening, depth of embedded portion exc half brick but n'exc one brick or any other fixing arrangement for frame/chowkhat as required to facilitate the taking down of chowkhat/frame and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4, type B-1 as required so as to fixed the holdfasts of new chowket or frame.(ii) Hold fast / fastners shall be measured and paid seperatly in respective item hereunder. |
| 25 | Taking down chowkhat or frame (without taking off shutter from the frame), area of opening exc 1.5 sqm and n'exc 4.00 sqm each, removing from the site complete all as specified and directed.Note:- Quoted unit rate includes cutting holes or dismantling of brick/stone/concrete masonary work of any discription in Jambs of existing opening, depth of embedded portion exc half brick but n'exc one brick or any other fixing arrangement for frame/chowkhat as required to facilitate the taking down of chowkhat/frame and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4,type B-1 as required so as to fixed the holdfasts of new chowket or frame.(ii) Hold fast / fastners shall be measured and paid seperatly in respective item hereunder. |
| 26 | S&F 105 mm X 60 mm size pressed steel frames for door with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc including one shop coat of red oxide primer, filing PCC (1:3:6), type C-0 (using 12.5 mm graded store aggregate) and two coat of synthetic enamel paint after preparation of primed surface complete all as specified and directed.Note: The cost of shop coat, synthetic enemel paint and PCC filling work shall deemed included in quoted unit rates. |
| 27 | S&F steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded, with and including preparation of new steel surfaces of any description over 10 cm width or girth Complete all as specified and directed. |
| 28 | S&F steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded, with and including preparation of new steel surfaces of any description over 10 cm width or girth Complete all as specified and directed. |
| 29 | S&F galvanised mild steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.45mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 30 | S&F 3 mm thick plain sheet glass ordinary quality , glazing with oil putty in square n. exc 0.5 sqm in each pane complete all as specified and as dirrected. |
| 31 | M&L for mild steel framed work such as grills gratings, sunshed cover fixed with nut bolts incl,cutting drilling holes etc., with ends of bars shouldered and/ or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed baluster, walk ways, railings, framedwork or water tanks and similar work conforming to Fe 290 Gde E 165 complete all as specified and directed. |
| 32 | S&F 35mm thick flush shutters , solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 33 | S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 34 | S&F100mm long extruded aluminium alloy butt hinges with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed. |
| 35 | S&F aluminium anodised barrel tower bolts of extruded section, length of bolt in 200 mm and fixed with machine made screws complete all as specified and directed |
| 36 | S&F 150mm size extruded aluminium alloy handle, fabricated type, anodised complete all as specified and directed. |
| 37 | M&L for preparation of new wooden surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engineer-in-charge |
| 38 | Material and labour for applying two coat of synthetic enamel paint on steel or iron surfaces of any decription, over 10 cm in width or grith, not othewise described including preparation of old surfaces complete all as specified and directed by Engineer -in-Charge. Please Enable Macros to View BoQ information |
| 39 | Material and labour for applying two coat of synthetic enamel paint on steel or iron surfaces of any decription, over 10 cm in width or grith, not othewise described including preparation of old surfaces complete all as specified and directed by Engineer -in-Charge. Please Enable Macros to View BoQ information |
