Tender For Construction Of Opd And Emergency Critical Area Block At District Hospital Bishnupur Manipur, Bishnupur-Manipur

TDR : 55362862

Tender Notice
BOQ

6 Days Left

Bishnupur , Manipur

Tender Brief : Tender For Construction Of Opd And Emergency Critical Area Block At District Hospital Bishnupur Manipur

Document Fees
₹ 10000 /-

EMD
₹ 1467300.0 /-

Tender Value
₹ 7.33 Crore /-

Submission Date
20-05-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	S.H.:- Construction of Main Building
2	EARTH WORKS
3	Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m. including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m
4	All kinds of soil.
5	Filling availabte excavated earth (excluding rock) in trenches. plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
6	Supplying and filling in plinth with sandy soil under floors including, cum watering,ramming consolidating and dressing complete.
7	CONCRETE WORKS:
8	Providing and laying cement concrete in foundation and plinth excluding the cost of centering and shuttering in
9	1:4:8 ( 1 cement:4 coarse sand:8 graded stone aggregate 40mm nominal size)
10	1:5:10 ( 1 cement:4 coarse sand:8 graded stone aggregate 40mm nominal size)
11	Making plinth protection 50mm thick of cement concrete 1:3:6(1 cement : 3 coarsesand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.
12	Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (Icement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size).
13	R.C.C. Work
14	Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :
15	1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)
16	Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,abutments, posts and struts etc. above plinth level upto floor five level excluding cost of centering,shuttering, finishing and reinforcement.
17	1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)
18	Reinforced cement concrete work in beams, suspended floors, roofs having stope upto 15o 9 landings, balconies, shelves, chajjas, lintels, bands, plain window sills,staircases and spiral stair cases above plinth level upto floor five level, excluding the cost of centering,shuttering, finishing and reinforcement with 1 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size).
19	RCC work in chimneys, shafts, upto floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1 :1.5:3 (1 cement: 1.5 c/sand : 3 graded stone aggregate of 20 mm nominal sizes).
20	Reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete.
21	a)Thermo-Mechanically Treated bars
22	Reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete.
23	a)Thermo-Mechanically Treated bars
24	FORM WORK
25	Centering and shuttering including strutting, propping etc. and removal of form for:
26	Foundations, footings, bases of columns, etc. for mass concrete.
27	Columns, Pillars, Piers, Abutments, Posts and Struts.
28	Lintels, beams, plinth beams, girders, bressumers ands cantilevers.
29	Suspended floors, roofs, landings, balconies and access.
30	Stairs, (excluding landings) except spiral-staircases.
31	BRICK WORKS:
32	Brick work with 1st class common burnt clay F.P.S. (non modular) bricks in foundation and plinth in:
33	Cement mortar 1:4 (1 cement : 4 coarse sand)
34	Brick work with 1st class common burnt clay F.P.S. (non modular) bricks in superstructure above plinth level upto floor V level in all shapes and sizes in
35	Cement mortar 1:4 (1 cement : 4 coarse sand)
36	Half brick masonry 2nd class (local 1st class) in cement mortar 1:3 (1 cement : 3 coarse sand) insuperstructure.
37	Cement mortar 1 : 3 (1 cement : 3 coarse sand)
38	WOOD WORKS
39	Providing wood work in frames of doors, windows, clerestory windows and other frames.wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia and length (hold fast lugs or dash fastener shall be paid for separately
40	a) Local best quality uningthou Wood
41	Providing and fixing panellod or panollod and glazed shutters for doors, windows and clerestory windows including ISI marked M.S butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge..
42	a) Local best quality Tolhao Wood
43	35 mm thick shutters
44	Providing and fixing bright finished brass 100 mm mortice latch with one dead bolt and a pair of lever handles with necessary screws etc. complete (best make of approved quality).
45	Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete
46	250 x 16 mm
47	Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. Complete.
48	250x10 mm
49	Providing and fixing chromium plated brass handles with necessary screws etc. complete:
50	125 mm
51	Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.
52	Fixed to openings /wooden frames with rawl plugs screws etc.
53	Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes,channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required ) and fitting the same with necessary stainless steel.
54	FLOORING
55	Cement plaster skirting (upto 30 cm height) with cement mortar 1:3 (I cement : 3coarse sand) finished with a floating coat of neat cement.
56	18 mm thick
57	Providing and laying vitrified tiles in different sizes (thickness to be specefied by manufacture), with water absorption less than 0.08% and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement motar 1:3 (1cement:3c/sand), jonting with grey cement slurry @ 3.3 kg/sqm including grouting the joint with white cement & matching pigments etc. complete.
58	sizes of tile 600x600 mm
59	Providing and laying Vitrified tiles in floor in diffe rent sizes (thickness to be specified by the manufacturer) with water absorption less than 0.080/0 and conforming to 19.15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will bo done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.
60	Sizes of Tiles 600x600 mm (Double charged)
61	Marble stone flooring with 18mm thick marble stone (sample Of marble shall be approved by Engineer-in-charge) over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete with.
62	Raj Nagar plain
63	Tile work in skirting, risers of steps and dado (upto 2 m height) over 12 mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm including pointing in white cement mixed with pigment of matching shade complete.
64	Marble tiles(polised) Raj Nagar 8mm thick
65	FINISHING:
66	12 mm cement plaster of mix :
67	1:3 ( 1 cement : 3 C/s )
68	15 mm cement plaster on rough side of single or half brick wall of mix.
69	1:4 (1 cement: 4 coarse sand)
70	Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade.
71	New work (two or more coats) over and including priming coat with cement primer:-
72	finishing walls with Acrylic smooth exterior paint of required shade :
73	New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cemont paint applied @ 2.20 kg/ 10 sqm).
74	Applying one coat of cement primer of approved quality on wall surface.
75	water thinnable cement primer
76	Applying priming coat :
77	With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood).
78	Providing and applying white cement based putty of average thickness Imm,of approved brand and manufacturer, over the plasterod wall surface to prepare the surface even and smooth complete.
79	Painting with oil type wood preservative of approved brand and manufacture.
80	New work( Two or more coats)
81	1(one) & Passenger AUTOMATIC Lift ( 6 Passengers)
82	Self Adhesive PU Tactile Tile.
83	ADA Braille Signage.
84	Water supply and sanitary installation
85	Earth work in surface excavation not exceeding 30 cm in depth but exceeding m in width as well as 10 sqm on plan including disposal of excavated earth upto 50 m and lift upto 1.5 m, disposed soil to be
86	All Kinds of soil
87	Filling availabte excavated earth (excluding rock) in trenches. plinth, cum 171.67 sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
88	Concrete
89	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -All work upto plinth level:
90	1:3:6( 1 Cement.• 3 coarse sand 6 graded stone aggregate 40 mm nominal size)
91	1:4:8 ( 1 Cement: 4 coarse sand 8 graded stone aggregate 40 mm nominal size)
92	FORM WORKS:
93	Centering and shuttering including strutting, propping etc. and removal of form for:
94	Foundations, footings, bases of columns, etc. for mass concrete
95	Suspended floors, roofs, landings, balconies and access
96	RCC WORKS:
97	Reinforced cement concrete work in beams, suspended floors, roofs having stope upto 15 landings, balconies, shelves, chajjas, lintels, bands, plain window sills,staircases and spiral stair cases above plinth level upto floor five level, excluding the cost of centering,shuttering, finishing and reinforcement with 1 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)
98	Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level.
99	Thermo-Mechanically Treated bars
100	PRE-CAST:
101	Providing, hoisting and fixing upto floor five lovol procast reinforced comont concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the tike including tho cost 01 required contoring, shuttering but excluding cost of reinforcement with 1:1.5:3 (1 cement: 1.5 coarse sand: 3graded stone aggregate 20mm nominal size).
102	Brickworks:
103	Brick work with 1st class common burnt clay F.P.S. (non modular) bricks in foundation and plinth in: cum
104	Cement mortar 1:4 (1 cement : 4 coarse sand)
105	Half brick masonry with 1st class common burnt clay F.P.S. (non modular) bricks in superstructure above plinth level upto floor V level in
106	Cement mortar 1 : 4 (1 cement : 4 coarse sand)
107	Honey-comb brick work 10/11.4 cm thick with 1st class common burnt clay FP.S. (non modular) bricks in superstructure above plinth level and upto floor V level in cement mortar 1 : 4 ( 1 cement : 4 coarse sand)
108	Flooring:
109	Cement concrete flooring 1:2:4 (I cement: 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost Of nosing of steps etc. complete.
110	40mm thick with 20mm nominal size stone aggregate.
111	Cement plaster skirting (upto 30 cm height) with cement mortar 1:3 (I cement : 3coarse sand) finished with a floating coat of neat cement
112	1B mm thick
113	SANITARY INSTALLATION
114	Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap. 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handlo lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:
115	White Vitreous china Orissa pattern W.C. pan of size 580 x 440 each as. 5,421.50 mm with integral type foot rests
116	Providing and fixing white vitreous china pedestal for wash basin eaccompletely recessed at the back for the reception of pipes and fittings
117	Providing and fixing P.V.C. tor sink or wash basin including P.V.C. waste fittings complete.
118	Flexible pipe
119	32 mm dia
120	Providing and fixing 600x450 mm bovolod cdgo mirror of superior 1,053.30 glass (Of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass scrows and washers complete.
121	Providing and fixing PTMT liquid soap container 109 mm wide, 125 each 195.80 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms
122	Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.
123	Providing and fixing UPVC soil, waste, rain water and vent pipes including all requisite fittings, jointing of pipes & fitting with solvent cement, tenching, refilling & testing of joints complete as per direction of Engineer in charge
124	75 mm dia
125	110 mm dia
126	Water Supply
127	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work. including cutting chases and making good the wall etc.
128	20 mm diameter
129	25 mm diameter
130	Providing and fixing G.l. pipes complete with G.l. fittings including trenching and refilling etc. External work
131	32 mm diameter
132	17.29 Providing and fixing C.P. brass bib cock of approved quality conforming tQ IS:8931
133	15 mm diameter
134	Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make confcrming to 19.8931.
135	15 mm diameter
136	Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete
137	25 mm diameter
138	Providing and fixing gun metal non-return valve of approved quality (screwed end)
139	32 mm diameter
140	horizontal
141	ProvidingandfixingC.P.brassshowerrosewith15mmor20mm
142	100 mm diameter
143	Providing and placing on tcrrace (at all floor levels) polyethylene per litre 10.20 water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and tho baso support for tank.
144	SH: Providing and Installaton of Internal Electrification
145	Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed PVC conduit, with modular switch, modular plate, suitable MS box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
146	Group A
147	Group B
148	Group C
149	Wiring for light/ power plug with 2X4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed steel conduit along with 1 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required.
150	Wiring for circuit/ submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.
151	2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
152	2X 4 sq. mm + 1 X 4 sq. mm earth wire
153	2 X 6 sq. mm + 1 X 6 sq. mm earth wire
154	Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
155	5/6 A switch
156	15/16 A switch
157	3 pin 5/6 A socket outlet
158	6 pin 15/16 A socket outlet
159	S/F 25 amp Air conditioning power plug point i/c 4 module metal box on surface or in recess 4 modules plate and cover in front 25 amp modular starter 25 amp odular socket and 25 amp plug i/c connection etc as reqd.
160	Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
161	Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required..
162	1 or 2 Module (75 mmX75 mm)
163	12 Module (200 mmX150 mm)
164	Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required
165	For ceiling fan & Exhaust
166	Supplying and fixing brass batten/ angle holder including connections etc. as required.
167	SUB HEAD-II : MCCB, MCB & DB’S
168	Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
169	8 way, Double door
170	Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required
171	Single pole
172	Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.
173	40 amps
174	SUB HEAD-III: RISING MAIN AND BUS TRUNKING
175	Supplying, installing, testing and commissioning of following capacity TPN tap off box made of 1.6mm thick sheet steel enclosure duly painted with powder coating on existing rising mains complete with TPN disconnector FSU and HRC fuses, connections, earthing etc. as required.
176	100 A, TPN
177	Supplying, Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable etc. as required. (havell,s /Bajaja/Phillips/Cromton).
178	1200 mm sweep
179	S/F 1.5 tone capacity split type Air conditioner, (Diamond, 3 star, 5G 29, G-SC 18 FD 3 WJH) complete with Indo oltage Stabilizer, Atomatic 4 KVA (140-280 for 1.5 ton).
180	SUB HEAD V:- Fittings/Fixtures
181	Supplying , Installation, testing and commissioning of LED Lamp (havell,s /Bajaja/Phillips/Cromton). Including connection etc. as required.
182	With CFL 12/15 Watts Lamp.
183	Supplying, Erection, testing and commissioning of (pre-wired) wall bracket/ceiling fittings of all sizes and shapes containing CFL/LED/W GLS lamps per fitting, complete with all accessories including connection etc. as required (havell,s /Bajaja/Phillips/Cromton).
184	Ceiling fitting (Surface) with 15/18 watt LED Lamp.
185	Supplying, Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.
186	FIRE HYDRANT SYSTEM
187	Providing & Fixing of M.S. pipe including of primer & red paint , fashner, MS bend , tei rod, universal clamp, MS socket, MS flange nut bolt , Gasket etc. Make : Nezone
188	a. 100 mm dia
189	b. 80 mm dia
190	c. 50 mm dia
191	e. 25 mm dia
192	Supply and fixing Hydrant valve
193	Supply and fixing RRL hose pipe 15 mtr. Long including male female coupling
194	Supply and fixing Branch pipe
195	Supply and fixing Hose box
196	Supply and fixing Hose reel hose with drum 30 mtr long
197	Supply and fixing Two way Valve
198	Supply and fixing ABC type fire extinguisher 4 kg
199	Supply and fixing CO2 type fire extinguisher 4.5 kg
200	Supply and fixing Pendent type Sprinkler
201	Supply and fixing 25 mm ball valve including of fittings
202	Supply and fixing Butterfly Valve 100 mm dia
203	Supply and fixing Butterfly Valve 50 mm dia
204	Supply and fixing Non Return Valve 100 mm dia
205	Supply and fixing Foot Valve 100 mm dia
206	Supply and fixing of Pressure Switch
207	Supply and fixing Pressure Gauge
208	Providing fixing of 5 HP Electrical main pump incuding of all fittings (monoblock type)
209	Providing & fixing of Electric panel/starter for main pump
210	FIRE DETECTION ALARM SYSTEM
211	1 loop panel, Expandable to 2 Loop fire alarm control panel
212	Smoke detector
213	Manual Call point
214	Hotter cum Sounder
215	1.5sq mm coper cable with PVC conduit Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents

Also Visit

Tenders

Manipur Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Construction Of Opd And Emergency Critical Area Block At District Hospital Bishnupur Manipur, Bishnupur-Manipur

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Construction Of Opd And Emergency Critical Area Block At District Hospital Bishnupur Manipur, Bishnupur-Manipur

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us