Name of Work:- A/R to Pb. Govt. Houses (H. No. 3027 to 3050 and 3067 to 3074 = 32x3 =96 Nos.(B-II) and (H. No. 3097 to 3124 and 3063 to 3066 = 32x3 96 Nos. (B-I), Cat- II, Sector 39-D, AND Pb. Govt. Houses, (H. No. 3051 to 3056 and 3125 to 3148 = 90 Nos. (B-I) and (H. No. 3057 to 3062 and 3075 to 3096 = 84 Nos. (B-II) Cat-III, Sector. 39-D, Chandigarh. for the year 2026-2027. (1st Quarter)
Sl. No.
Item Description
1
Scraping (a) White wash and colour wash. (CSR 8.31) (a)
2
Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish. (CSR 16.65)
3
Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats on old distempered work when shade is changed. (CSR 16.12)
4
Painting two or more coats with synthetic enamel paints in all shades on old wood work or metallic or plastered or concrete surface to give an even shade including rubbing down old paint.(CSR 16.18)
5
Finishing walls with cement based water soluble exterior paint such as snowcem, robbiacem etc. two or more coats to give an even shade. (CSR 16.13)
6
Providing surface treatment to external / internal wall with water resistant grade, anti fungal, anti rusting, antifoaming, high percentage acrylic binder washable surface with two coats to be provided with spatula over one coat cement primer including preparation of surface with water resistant grade match colour complete as per specifications and to the entire satisfaction of engineer- in- charge. (CSR 16.68)
Wire gauge Hollock wood door shutter without springs housed in chowkat (A) 35 mm thick. (CSR 17.11) (ii) (A)
9
Factory manufactured flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code : II Revision IS-2191 Part-I) 1973 (a) Commercial with elm or gurjan facing on both \ Sides with laminated core and lipped edges:- (iv) 35mm thick. (CSR 17.27) (a) (iv)
10
Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws, welding rod complete fixing in position. (CSR 18.4) Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
