|
| 1 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) all as specified and directed. |
| 2 | Dismantling of floor, hearth or wall tilling including cement mortor bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 3 | M&L for 150 mm thick PCC 1:4:8 type D2 (40 mm aggregate) as in sub base /foundations, filling and mass concrete complete all as specified and directed by Engr-in-Charge. |
| 4 | M & L for Virified Ceramic tiles 8 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in floor laid over and including 15 mm thick screed bed in CM 1:6 as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified. |
| 5 | M & L for non skid coloured ceramic tiles 7 to 8mm thick square / rectangular area of each tile exc 0.18 Sqm but not exc 0.38Sqm as in floor laid over and including 15 mm thick screed bed in CM 1:6 as in floor etc. set and jointed in neat cement slurry and pointed in coloured cment to match colour tiles complete all as specified. |
| 6 | M & L for Glazed ceramic coloured tiles in vertical surface 350x250x7mm/450x300x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering in cm 1:4 complete all as specified. |
| 7 | M & L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick set, jointed and pointed in neat cement slurry over 15mm thick screed bed in CM 1:6 as in floors complete all as specified. |
| 8 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed. |
| 9 | Material and labour for machine cut kota stone slab 20-25 mm thick laid and jointed with S grey cement slurry mixed with pigment to match shade of the slab including cutting waste, rubbing and polishing (Granite finish) over and including cement screed bed 20 mm thick in cement mortar (1:6) base including rubbing and mirror polishing, complete all as specified. |
| 10 | Material and labour for 18-20mm thick granite (of any type) machine cut and machine S polished, and moulded as in steps, jambs, pillar, counter WHB, floor, etc over and including 10mm thick in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite, complete all as specified. |
| 11 | M&L for 100 mm thick PCC 1:4:8 type D2 (40 mm aggregate) as in sub base complete all as specified and directed by Engr-in-Charge. |
| 12 | M&L for 80mm thick coloured machine pressed precast concrete interlocking paver block glossy finished any size and shape conforming to IS 15658-2006, M-35 Grade with grey cement and pigment over stone dust filling complete all as directed.(Cost of sand will be measured and paid separately) |
| 13 | M & L for Sand filling under floors or in foundations including watering and consolidation complete all as specified. |
| 14 | M&L for 75mm thick PCC (1:3:6), type C-2 using 40mm graded stone aggregate as in plinth protection, surface finished even & smooth without using extra cement, with and including joint filling (Size 30mm deep x 10mm wide) with sealing compound grade-A at 3m interwal and corner complete all as specified and directed. |
| 15 | Dismantling of Plain or corrugated steel sheeting, Pre painted galvatume aluminium Zinc Coating any gauge, thickness, including Nainital or similar pattern roof coverings all as specified and directed. |
| 16 | Dismantling timber scantlings 40 sq.cm and over in section, in any positions as in framed work complete all as specified and directed. |
| 17 | -Ditto- all as per item above but in fillets, rails, posts, rafters, purlins, etc under 40sq.cm in section complete all as specified and directed. |
| 18 | Dismantling wrought iron or mild steel work of any description complete all as specified. |
| 19 | S&F Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters: walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165. |
| 20 | S&F Roof trusses (Framed), trussed, purlins, rafters, crane gantries, rails and fastenings and heavy bracket framing (Beam,tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and as directed. |
| 21 | S & F for Pre- painted galvalume aluminum zinc coating Gl based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified all as specified and directed. |
| 22 | S & F for Pre- painted galvalume aluminum zinc coating Gl based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/eaves board/cladding to wall, fixed with self tapping screws as specified all as specified and directed. |
| 23 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets etc complete all as specified and directed. |
| 24 | M&L for suspended false ceilling comprising of 5 to 6mm thick non asbestos fibre cement bulding boards fixed or laid/inserted to Gl frame work with screws over Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. Hangers 2 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified |
| 25 | M&L for suspended false ceilling comprising of 7 to 8 mm thick coated coloured / wooden textured hollow PVC panels fixed or laid/inserted to Gl frame work with screws over Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. Hangers 2 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified |
| 26 | S&F 5mm thick Printed PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at site. |
| 27 | Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for. |
| 28 | M & L for RCC 1:2:4 type B-1 (20 mm graded stone agg) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed |
| 29 | M & L for use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for fair finished surfaces of concrete complete all as specified and as directed. |
| 30 | S & F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 31 | Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quions, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles all as specified and directed. |
| 32 | Material & labour old size brick work with sub class 'B' bricks in CM 1:6 brick straight or curved on plain exeeding 6m mean radius complete all as specified and directed. |
| 33 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed. |
| 34 | M & L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement plaster 1:4 using WPC 3% by weight of cement (WPC to be measured and paid separately) and finished even and smooth (without using extra cement) complete all as specified and directed. |
| 35 | M & L for rendering 10mm thick on fair faces of brick or concrete surfaces in cement plaster 1:6 and finished even and smooth (without using extra cement). |
| 36 | Supply only integral water proofing compound of approved brand/make. |
| 37 | Saking down chowkats or frames not exc 1.5 sqm each with shutter (without taking off shutter from the frame) and removing complete all as specified and directed by Engr-in- |
| 38 | Taking down chowkats or frames exc 1.5 sqm but not exceeding 4 sqm each but with shutter (without taking off shutter from the frame) and removing to storecomplete all as specified and directed by Engr-in-charge. |
| 39 | S & F solid PVC door frame of size 50mm * 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube supplying & fixing in opening as per specified & drawing. |
| 40 | S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC 'C' channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 41 | Cutting holes in brick walls exc 1/2 brick & n exc full brick built in cement mortar for inserting hold fasts, cutting and preparation of brick wall for insertion of doors, windows & ventilator and making good dismantled portion in cement mortar 1:3 etc complete. |
| 42 | S&F pressed steel frame size (125 * 60mm) for doors with one or more rebates including necessary fixing lugs, hold fast hinges, lock strike plate, etc complete as specified. |
| 43 | Supply and fixing factory made flush shutters 40 mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides, ISI marked complete all as specified. |
| 44 | S & F 35 mm thick second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars) chamfered or rounded. fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in SSR Pt I Section 8, clause 8.24 (a) |
| 45 | M&L coated (powder coated of requried colour) doors frame top & sides of 100 * 84.45 * 3mm bottom size 100 * 84.45 * 3mm and shutter top & bottom of size 20653 and lock side shutter frame of size 100 * 44.45 * 3mm (section No 20653) including 100 * 44.45 * 3 section No 21545) and sides (handle) of size 100 * 44.45 * 3 (section No complete and including and fixing 5mm thick glass with necessary rubber beading gasket etc including necessary plaster, painting.cill and making good to disturbed portion all as specified and as directed by Engr-in-charge. |
| 46 | M&L Aluminium powder coated (powder coated of requried colour) three track sliding windows frame top & sides of size 92 * 31.75 * 1.5 mm (section No 20831size 92 * 31.75 * 1.5mm (section No 20832and shutter top & bottom of size 40 * 18 * 1.55mm (and sides (handle) of size 40 * 18 * 1.55mm (section No 20738) and lock side shutter frame of size 40 * 18 * 1.45mm (section No 20737)\\" with including and fixing rubber gasket, beading arrangement including making good to the disturbed portion complete including & fixing stainless steel wire mesh 0.36mm nominal dia of wire with 1.40mm average aperture and fixed with stainless steel wire staples and including and fixing 5mm thick glass with necessary rubber beading gasket etc including necessary plaster, painting,cill and making good to disturbed portion all as specified and as directed. |
| 47 | S&F aluminium powder coted ventilator louvers type frame top and bottom of size 31x42x1.60mm(sec no-20558) rectaular tube of size 40 * 20 * 2 mm (sec no-14019 and middle verticalof size 42 * 46.2 * 1.6mm sec(20560) and clip for fixing wiremesh and glass of size 19 * 17.3 * 0.9mm (sec no-19360)thick including and fixing stainless steel wire cloth 0.36mm niminal dia of wire and 1.40mm average width of aperature and fixed with stainless steel wire staples and supply and fixing 5mm thick louvers with blades of 100 mm heavy duty with neccessary rubber beading gasket etcincluding necessary plaster, painting,cill and making good to disturbed portion complete all as specified and directed. |
| 48 | S&F aluminium anodised grill of 7.00mm dia square, rectangular, triangular and circular shape aperture n. exc 7 cm in length or width fixed with H or F channel complete all as specified and directed |
| 49 | Material & Labour for providing and fixing stainless steel (Grade 304) railing Made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where everrequired) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories &stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement completed all as specified. |
| 50 | S & F Stainless steel wire cloth, 0.63 mm dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples complete all as specified and directed. |
| 51 | S & F 100 mm long extruded mild steel anodised Butt hinges with galvanized mild steel and fix complete all as specified and directed. |
| 52 | Supply & fixing Aluminium barrel tower bolt of 150mm long stove enamelled black with E bright bolt complete all as specified and directed by Engr-in-charge. |
| 53 | S & F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) E and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of truded sections or cast-aluminium alloy and fixed complete all as specified and directed by Engr-in-charge. |
| 54 | Supply & fixing Aluminium alloy pressed handle oval type stove enamelled black of Fa 125mm long fixed with screw to shutter complete all as specified and directed by Engr-in charge. |
| 55 | Preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer. |
| 56 | M & L for preparation of new or previously untreated surfaces of steel of any descriptions over 10 cm in width or girth not otherwise described applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide primer. |
| 57 | M & L for preparation of surfaces of wall & concrete and applying 1 mm thick wall care putty including preparation complete. |
| 58 | M&L for preparation of new plastered or unplastered surfaces of wall and applying two coats of oil bound distemper on wall or concrete over a coat of primer on prepared surfaces including, rubbing with sand paper complete. |
| 59 | M&L for preparation of old plastered or decorated surfaces of wall and applying two coats of oil bound distemper on wall or concrete over a coat of primer on prepared surfaces including, rubbing with sand paper including complete removal of the existing treatment. |
| 60 | M&L preparation of new plastered or unplastered surfaces of wall and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over & including 1 mm thick of cement base putty complete all as specified and directed. |
| 61 | S&F in repair bib tap 15 mm bore fancy type, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete. |
| 62 | S&F in repair angle cock 15 mm bore fancy type chromium plated, with capstan head. high pressure, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe complete all as specified and directed |
| 63 | S&F in repair CP brass tubular towel rail 20 mm dia D type 60 cm long between flanges complete. |
| 64 | S&F for 15 mm bore WHB & Sink fancy type Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 65 | Supply & fix in repairs, stainless steel soap dish disc wall mounted (oval) type, glossy finish including all necessary screws of same finish of pattern complete all as specified and directed. |
| 66 | S&F in repair vitereous china Counter top oval shape wash hand basin, size 580x45 mm excluding taps, waste, chain and plug and porcelain stopper but including brackets incl 32 mm dia brass CP waste fittings (coupling) including 32mm waste pipe complete all as specified and directed. |
| 67 | S&F in repair vitreous china wash down water closet pan (Pedestal pattern white including fixing bolt and plastic water closet seat white closed pattern with flat bottot cover with MS chromium plated hinging devices to matching colour complete all as specified and directed |
| 68 | Supply and fixing in repair, vitreous china urinal half stall type, coloured complete including providing and fixing plugs, bedding urinal against wall in CM 1:2 securing urina to plugs with and including 60 mm brass screws, pointing around urinal back in cement fixing grating and union for discharge pipe excluding flushing cistern, flush pipe but including CP waste coupling, PTMT urinal spreader, etc. complete all as specified and directed. |
| 69 | S & F stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm all as specified and directed. |
| 70 | S&F in repair 10 Ltr capacity PVC valveless shyphonic action type low level flushing cistern white with inlet, ball valve, float valve and handle incl bracket and flush pipe of low level of 32mm dia fixed to wall complete. |
| 71 | S & F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified |
| 72 | S&F in repair PVC connection 15mm size with PTMT nut of length 450mm |
| 73 | Taking down AC/PVC eaves gutter and rain water pipes of any size and pattern including all fittings pipes with spigot and socket ends and lead joints including burning out joints of 100/75 mm dia pipe. |
| 74 | S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete. |
| 75 | S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete. |
| 76 | M/L PVC(SWR) bend of 110mm dia of any radius etc complete all as specified and directed. |
| 77 | M/L PVC(SWR) Tee of 110mm dia etc complete all as specified and directed. |
| 78 | S&F PVC (SWR) bends any radius provided with access door of 75 mm dia complete all as specified and directed. |
| 79 | S&F PVC (SWR) multi floor trap, plain with grating with or without waste hole including jointing with solvent cement 75mm dia etc complete. |
| 80 | S&F in repair C.P. grating 100mm square/round with or without hole complete all as specified and directed |
| 81 | S&F in repairs stainless steel toilet paper holder fixed with wooden gutties and screws to wall surfaces. |
| 82 | S&F in repairs mild steel, chromium plated curtain rod 20mm dia fancy type with holder/bracket, stops, rollers etc. |
| 83 | S & F 5 to 6 mm thick full length size bevelled edge mirror of selected quality glass, fixed in wall with chromium plated brass screws and cup washers all as specified and directed. |
| 84 | Dismantling PVC water tanks Exc 500 ltrs but not 1000 ltrs including taking down of float valve and removing from site complete. |
| 85 | S&F 1000 Ltrs capacity PVC Rotational Moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layer hoisted and fixed in position all as specified. |
| 86 | S&F ball valve/float ball high pressure of PTMT 20mm with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed minimume weight 210 gm etc all as specified and directed. |
| 87 | S&F in repair 15mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed all as specified and directed. |
| 88 | S&F in repair 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed all as specified and directed. |
| 89 | Taking up or down steel tubing and connections with all fittings for 15 mm bore Gl tubing all as specified and directed. |
| 90 | Taking up or down steel tubing and connections with all fittings for 20 mm bore Gl tubing all as specified and directed. |
| 91 | Supply and fixing steel water tubing of 15 mm bore, medium grade galvanized with provision of all new fittings as required, laids in floor, wall and on ceiling, complete all as specified and directed. |
| 92 | Supply and fixing steel water tubing of 20 mm bore, medium grade galvanized with provision of all new fittings as required, laids in floor, wall and on ceiling, complete all as specified and directed. |
| 93 | M & L for Treatment of soil along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed. |
| 94 | M & L for Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed. |
| 95 | 5 M& L for 1.25 mm thick of 150 mm dia Mild steel sheet eaves gutters, galvanised class 3, half round with rounded edges complete all as specified and directed. |
| 96 | S&F for Drop ends (for spigot or socket ends) or nozzles of dia 150 mm complete all as specified and directed. |
| 97 | S&F for Stop ends (for spigot or socket ends) of dia 150 mm complete all as specified and directed. |
| 98 | S&F PVC moulding 30mm to 45mm thick fixed at sides of ceilings complete all as specified and as directed. |
| 99 | Taking down copper /aluminium point wiring (light, fan, bell,socket or power) complete including fixture and fittings such as switches, ceiling roses, pendent, regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit a for above items should be made as per condition seperately) and making good distrubed surfaces of walls, floors etc complete all as specified and directed at site. |
| 100 | Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface complete all as specified and directed. |
| 101 | Taking down carefully copper/aluminium Sub main wiring of any size from surface/concealed /existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed. |
| 102 | Labour only for taking down the exixting Geyser of any size/type and refixing the same including replacement of unsv heating element 1.5/2 KW, thermostate, 3 pin plug top 15 Amp, CP flexible pipe for 450 mm long heat insulated -02 Nos, painting of geyser complete with two coats synthetic enamel paint by spraying including filling cavities with filler after cleaning all dust etc. complete all as specified and as directed. |
| 103 | Labour only for taking down the existing exhaust Fan, refixing the same including replacement of unsv 3 core PVC insulated PVC sheated 3 core multistranded copper conductor cable of size 23/ 0.193 from ceiling rose to fan terminal including over hauling the same, painting complete with two coats synthetic enamel paint (as per existing) by spray gun including filling cavities with filler after cleaning all dust etc. complete all as specified and as directed. |
| 104 | Labour only for taking down the existing ceiling Fan, refixing the same including replacement of unsv 3 core PVC insulated PVC sheated 3 core multistranded copper conductor cable of size 23/ 0.193 from ceiling rose to fan terminal including over hauling the same, painting complete with two coats synthetic enamel paint (as per existing) by spray gun including filling cavities with filler after cleaning all dust etc. complete all as specified and as directed. |
| 105 | M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed for the following :- |
| 106 | (a) One light point controlled by one, one way switch 5 Amps |
| 107 | (b) One fan point/ exhaust fan point controlled by one, one way switch 5A & regulator |
| 108 | (c) One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board. |
| 109 | (d) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad. |
| 110 | (e) One bell point controlled by one, bell switch 5 Amps |
| 111 | Description all as per item No 105 here in before but using 2.5 sq mm single core copper conductor FRLSH cable of multistranded PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm copper conductor FRLSH cable of multistranded PVC insulated unsheathed as earth continuity conductor along with wiring and connecting to the common eath dolly. |
| 112 | Description all as per item No 105 here in before but using 4.0 sq mm single core copper conductor FRLSH cable of multistranded PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 4.0 sq mm copper conductor FRLSH cable of multistranded PVC insulated unsheathed as earth continuity conductor along with wiring and connecting to the common eath dolly. |
| 113 | S & F for ceiling rose, surface Bakelite with 3 terminals, ISI marked for batten fitting complete. |
| 114 | S & F for modular switch piano flush type, single pole, one way, and 5/6 Amp single module complete all as specified. |
| 115 | S & F for modular switch piano flush type, single pole, one way, and 15/16 Amp single module complete all as specified. |
| 116 | S & F for modular socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module piano flush type complete all as specified. |
| 117 | S & F for modular socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module piano flush type complete all as specified. |
| 118 | S & F for modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and as directed. |
| 119 | S & F for Bell push modular 6 Amps single module complete all as specified. |
| 120 | S & F for lamp holder, PVC / Polycarbonate type with back plate suitabl for batten/ slanting fittings complete all as specified and directed. |
| 121 | S & F for Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ A C supply complete all as specified and as directed |
| 122 | S & F for modular type TV Socket out let complete all as specified and as directed. |
| 123 | M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm cable,one run of 6 sqmm cable and one run of PVC conduit will be measured as one unit |
| 124 | S & F for sheet metal enclosure MCB DB TPN 4 way Vertical type with 200 Amps rated bus bar 415 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. |
| 125 | S & F for sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. |
| 126 | S & F for MCB tripple pole and neutral rated capacity 63 Amps, 415 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed. |
| 127 | S & F for MCB Single pole and neutral rated capacity 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed. |
| 128 | S & F for MCB Single pole rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed. |
| 129 | S & F for metal clad box suitable for 230 volt 50 Hz AC supply three pin with MCB SP 20/32 Amps including removal of old unserviceable one complete all as specified and as directed complete all as specified and as directed |
| 130 | S & F for Highly efficient LED Bulbs, 10 W, used as a ready replacement for existing GLS/CFL direct fit lamp,in B-22 cap complete all as specified and directed |
| 131 | S & F for Decorative wall mounting light fitting with ifferent finisher with brosil glass frosted & soda glass suitable for 7.5 W A60 LED Lamp with E-27 base, provosion of LED lamp 7.5 watt A60 complete all as specified and as directed. |
| 132 | S & F for wall mounted LED tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc with warranty option of 5 years from date of installation complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. |
| 133 | S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 35 watts with pre wired and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge. |
| 134 | S & F for PVC non-metallic rigid conduit ISI marked heavy duty white/ Ivory colour and its accessories heavy duty ISI marked of size 20 mm dia for LAN, telephone and TV connections including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed. |
| 135 | M & L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to GI earth wire 4mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia. medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20 mm dia, PCC Chamber, CI frame and cover, MS funnel with wire mesh all as shown in electrical plate no 3 of SSR part I including excavation and earthwork in any type of soil/strata and testing on completion. Note :- GI earth wire 4 mm dia and 15 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted. |
| 136 | S&F energy efficient recessed mounted LED luminaire 36 Watt suitable for 2'x2' grid ceiling with flat diffuser and lumen output of 3300 lumens having constant current electronic driver duly connected with 0.5 sqmm white colour PVC insulated & sheathed three core flexible multi stranded copper conductor cable in renewal of any type luminaire as required. |
| 137 | Labour only for taking down/ refixing the existing energy efficient recessed mounted LED luminaire 36 Watt suitable for 2'x2' grid/Joomer Light of any type obtained during dismantling of wiring including fixing with flat diffuser and lumen output of 3300 lumens having constant current electronic driver duly connected with 0.5 sqmm white colour PVC insulated & sheathed three core flexible multi stranded copper conductor cable in renewal of any type luminaire as required. |
| 138 | Schedule of credit amount of Rs. 3,36,318.50 to be deducted during AOC Please Enable Macros to View BoQ information |
