|
| 1 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : |
| 2 | Of area 3 sq. metres and below |
| 3 | Providing and fixing factory made uPVC glazed/wire mesh windows/ doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and lnline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately. Note:- Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for (i) Sites with basic wind speed > 45 m/sec as per IS 875 — Part 3 (ii) Sites with structure height more than 20m for all wind speeds |
| 4 | Two and half track three panels sliding window with two glazed & one wire mesh panels with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body. Using R2 series with frame (65 mm & above) x (40 mm & above) & glazed sash (25 mm & above) x (50 mm & above) & fly screen sash (18 mm & above) x (40 mm & above) with zinc alloy (zamak) powder coated touch locks with hook (Height upto 1.2 metre). |
| 5 | Providing & Applying weather proof sealant on outer joints of approved make confirming to IS & directed by Engineer-in-charge. |
| 6 | Sealant 25 mm x10 mm at joints |
| 7 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 8 | 100 mm |
| 9 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. |
| 10 | Twin rubber stopper |
| 11 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : |
| 12 | 300x16 mm |
| 13 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. |
| 14 | Two coats |
| 15 | Finishing walls with textured exterior paint of required shade: |
| 16 | Old work (One or more coats) applied @ 1.82 Itr/10 sqm. |
| 17 | Polishing on wood work with ready made wax polish of approved brand and manufacture : |
| 18 | Old work |
| 19 | Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade: |
| 20 | One or more coats on old work |
| 21 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: |
| 22 | Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture |
| 23 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. |
| 24 | G.I. pipes |
| 25 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : |
| 26 | For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 27 | Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. |
| 28 | Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides |
| 29 | Providing and fixing Chrome Plated Health Faucet with 1.0/1.2m Flexiable Tube and hook complete of make Jaquar, Prayag , Parryware or equalient. |
| 30 | Providing and fixing PTMT soap Dish Holder having length of 138 mm, breadth 102 mm, height of 75 mm with concealed fitting arrangements, weighing not less than 106 gms. |
| 31 | Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms. |
| 32 | Providing and fixing cabinets under the kitchen counter using 18mm thick one-side decorative and other-side pre-laminated factory-pressed HDHMR (High Density High Moisture Resistance) board conforming to IS:1659 (E1/E2 grade) of approved brand and shade, including necessary partitions, shelves with shelf supports, shutters, edge banding with matching tape, and fixing with full-threaded PTS/SS screws, complete as per direction of the Engineer-in-Charge.Note: Hardware fittings such as hinges, handles, baskets, magnetic catchers, telescopic channels, Bottle Pull out etc., shall be provided and paid for separately. However, all screws required for assembly and fixing of the cabinet structure are included in the scope of this item. |
| 33 | Providing and fixing SS soft auto-close hinges (clip-on type, 0° inset, 35mm cup diameter), excluding corner hinges, suitable for modular kitchen shutters, of approved make such as Hettich, Hafele, Godrej, Boss, Archies, or Ebco. |
| 34 | Providing and fixing modular handles – 96mm to 128mm center-to-center, bright or matt finish, of approved make, as per the direction of the Engineer-in-Charge. |
| 35 | Providing and fixing 1mm thick lamination, including cutting, edge finishing, fixing with the required adhesive, and all accessories such as masking tape, etc., complete in all respects, including labour charges, making charges, transportation, loading/unloading, and all applicable taxes and duties Please Enable Macros to View BoQ information |
