|
| 1 | Dismantling of steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50metres lead as per direction of Engineer - In - Charge. (DSR No.15.18) |
| 2 | Demolishing brick work manually/by machanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In Cement Mortar (DSR No.15.7.4) |
| 3 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead complete in all respects to the entire satisfaction of Engineer - In - Charge.(DSR No.15.56) |
| 4 | Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable material within 50 metres lead complete in all respects to the entire satisfaction of Engineer - In - Charge. (DSR : 15.26) |
| 5 | Demolishing mud phaska in terracing and disposal of material within 50 metres lead complete in all respects to the entire satisfaction of Engineer - In - Charge. (DSR No. 15.27) |
| 6 | Dismantling dressed kotah stone work, manually/by machanical means including stacking of serviceable and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge: - In cement mortar (N.S.) |
| 7 | Taking out doors, windows and clerestory windows shutter (steel or wood) including stacking within 50 metres lead as directed by Engineer - In - Charge : Of area 3 sq. metres and below(DSR No.15.13.1) |
| 8 | Taking out existing CC interlocking paver blocks/PCC tile from footpath/ central verge, including removal of rubbish and cleaning of paver block from cement mortar etc. disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. |
| 9 | Taking out existing kerb stones of all types from footpath/ central verge, including removal of mortar and cleaning of Kerb stone from cement mortar etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. |
| 10 | Removing dry or oil bound distemper, water proffing cement paint and the like by scrapping sand parering and preparing the surface smooth including necessary repairs to scratches etc. complete in all respects to the entire satisfaction of Engineer - In - Charge. (DSR No.14.46) |
| 11 | Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size) complete in all respect to the entire satisfaction of Engineer. (DSR No. 4.10) |
| 12 | Re - Fixing of old Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement: 4 coarse sand) as per direction of Engineer - In - Charge. (N.S.) |
| 13 | Brick work with common burnt clay F.P.S (non modular) brick of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in: Cement mortar 1:6 (1 cement : 6 coarse sand) complete in all respects to the entire satisfaction of Engineer - In - Charge. (DSR No.6.4.2) |
| 14 | 12 mm cement plaster of mix 1:4 (1 cement : 4 fine sand) complete in all respect to the entire satisfaction of the Engineer - In - Charge. (DSR No.13.1.1) |
| 15 | Providing and applying 2mm thick wall putty (Birla/J.k. etc) with smooth surface complete in all respect to the entire satisfaction of the Engineer-In-Charge.(DSR No.13.26) |
| 16 | Distempering with 1st quality acrylic distemper (ready mix) having VOC content less than 50 grams/litre of approved brand and manufacture to give an even shade : Old work (one or more coats) (DSR No.13.90.1) |
| 17 | Distempering with 1st quality acrylic distemper (ready mix) having VOC content less than 50 grams/litre of approved manufacture,of required shade and colour complete, as per manufacture's specification: Two or more coats on new work (DSR No.13.42.1) |
| 18 | Finishing walls with Acrylic Smooth exterior paint : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) complete in all respect and to the entire satisfaction of the Engineer-in-charge.(DSR No.13.46.1) |
| 19 | Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement: 3 fine sand): Flush / Ruled/ Struck or weathered pointing.(DSR 13.31.1) |
| 20 | Finishing walls with Acrylic Smooth exterior paint of required shade. Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface complete in all respect to the entire satisfaction of Engineer - In - Charge. (DSR No.13.111.1) |
| 21 | Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorber as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge. Profile C Fixing with adjustable lugs with split end tail to each jamb (DSR No.10.14.2.1) |
| 22 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 8.0 mm thickness (weight not less than 10kg/sqm) (DSR No.21.3.3) |
| 23 | Extra for providing and fixing steel beading of size 10 x 10 x 1.6 mm (box type), approved shape and section with screws instead of glazing clips and metal sash putty, in steel doors,windows, ventilators and composite units complete in all respect to the entire satisfaction of Engineer - In - Charge. (DSR No.10.12) |
| 24 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I)non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. (DSR 9.21.2) |
| 25 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : 30 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size: Second class teak wood complete in all respect to the entire satisfaction of Engineer - In - Charge. (DSR No.9.27.2.1.1) |
| 26 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 300x16 mm DSR 9.96.1 |
| 27 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 250x16 mm (DSR No.9.96.2) |
| 28 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : 300x10 mm (DSR No.9.97.1) |
| 29 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 250x10 mm (DSR No.9.97.2) |
| 30 | Providing and fixing aluminium handles ISI marked anodised (anodic coating not shade with necessary screws etc. complete : 125 mm ( DSR No.:9.100.1) |
| 31 | Providing and fixing aluminium Handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 100 mm (DSR No.9.100.2) |
| 32 | Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. : Twin rubber stopper (DSR No 9.101.2) |
| 33 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works complete in all respect to the entire satisfaction of Engineer - In - Charge. (DSR No.10.25.2) |
| 34 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : New work (one or more coat). DSR No. 13.61.1) |
| 35 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : old work (one or more coat). (DSR No. 13.99.1) |
| 36 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade (Area of slab over 0.50 sqm (DSR No. 8.2.2.2) |
| 37 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level 1:5:10 (1 Cement 5 Coarse Sand 10 Nominal size of stone agg ) complete in all respect to the entire satisfaction of Engineer - In - Charge. (DSR No.4.1.10) |
| 38 | Providing and Laying of kerb of size 2’-0” x 9” having 4” thickness at bottom and 3” thickness at top placed at or near ground level in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints, except at sharp curve, shall not be more than 5 mm), including making drainage opening wherever required etc. complete as per direction of Engineer-in-charge. |
| 39 | Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over 20mm thick compacted bed of cement sand mortar 1:4 including grouting the joints with cement mortar etc. all complete as per the direction of Engineer-in-charge. |
| 40 | Painting top roofs with bitumen of approved quality at 17kg per 10 sqm impregnated with a coat of coarse sand at 60cudm per 10sqm including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete (with residual type petroleum bitumen of grade VG-10 bulk to the entire satisfaction of the Engineer - In - Charge. (DSR No.12.15.1) |
| 41 | 10 cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa @ 35 kg per cum of earth and gobri leaping with mix 1:1 (1 clay : 1 cow dung) and covered with flat tile bricks, grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finished neat : With common burnt clay F.P.S.(non modular) brick tile of class designation 10 (DSR No.12.16.1) |
| 42 | Extra for every additional 1 cm thickness of mud phaska (DSR 12.18) |
| 43 | Providing and laying brick tiles over mumty, roofs, grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement, over 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished neat: With common burnt clay F.P.S. (non modular) brick tiles of class designation 10) complete in all respect to the entire satisfaction of Engineer - In - Charge. (DSR No.12.19.1) |
| 44 | Re-laying of old serviceable brick tiles over roofs, grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement, over 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished neat complete in all respect and to the entire satisfaction of the Engineer-in-Charge. (N.S.) |
| 45 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :In 75x75 mm deep chase (DSR 12.21.1) |
| 46 | Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately) (DSR No.16.53) |
| 47 | Providing and Fixing M.S Angle Iron 50X50X6 mm Y angle in position and alignment of size 3'-0\\" over and 1' - 6'' fixed & welded with jaffery on existing boundary wall . The complete Angle shall be painted with two coats of approved quality paint over one coat of primer complete in all respect to the entire satisfaction of Engineer-in-Charge. (N.S.) |
| 48 | Providing and fixing Barbed wire 12 X 12 ply hot dipped confirming to IS 278-1978 type B and Designation (wt 125gm/Rmt) on Existing angle complete in all respect to the entire satisfaction of the engineer in charge. (N.S.) |
| 49 | Credit of Steel i.e railing / flat / angle etc complete in all respect and to the entire satisfaction of the Engineer-in-charge. (N.S.) |
| 50 | Part - B Public Health Work (Detailed estimate Submitted by SDE M.C.P.H Sub DivisionNo. 22 Vide Memo No. 588 dated 06.01.2026) |
| 51 | Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead ((DSR No. 15.52) |
| 52 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge. (DSR No. 14.82) |
| 53 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (DSR No.2.8.1) |
| 54 | Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete in all respect to the entire sartisfaction of Engineer - In Charge. (DSR No. 19.1.3) |
| 55 | Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete in all respect to the entire sartisfaction of Engineer - In Charge. (DSR No. 19.6.3) |
| 56 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design (DSR No. 19.2.3) |
| 57 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering – All work upto plinth level 1:5:10 (1cement : 5 coarse sand : 10 graded stone aggregate 40 mmnominal size ) (DSR No. 4.1.10) |
| 58 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering – All work upto plinth level. 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) (DSR No. 4.1.4) |
| 59 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) (DSR No. 6.1.1) |
| 60 | 12 mm cement plaster finished with a floating coat of neat cement of mix 1:4 (1 Cement: 4 Fine sand) (*DSR No. 13.7.2) |
| 61 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 1 5° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1 :1 .5:3 (1 cement : 1 .5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size) (DSR No. 5.3) |
| 62 | Providing and fixing in position precast R.C.C. manhole cover and frame of required shape and approved quality : Circular shape 560 mm internal diameter(DSR No. 19.19.3.1) |
| 63 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placingin position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more (DSR No. 5.22.6) |
| 64 | Making connection of drain or storm line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1cement: 3 coarse sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete (DSR No. 19.21.1) |
| 65 | Providing and Fixing of precast RCC M-20 HD Road Gully cover and frames in 1:2 Cement Sand Mortar on the top of brick masonary chamber complete in all respects to the entire satisfaction of EIC.(Size of cover 690 x 537 x 80mm and of frame is 810 x 657 x 130mm). The work also includes removal/ dismantling of old frame and cover including minor repairs of the road gully if required. (N.S.) |
| 66 | Providing & fixing of PVC waste pipe (NS) |
| 67 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern,with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : (DSR No. 17.5) |
| 68 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 :- 15mm nominal bore (DSR No. 18.53.1) |
| 69 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore (DSR No. 18.49.1) |
| 70 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid (DSR No. 17.2.1) |
| 71 | Providing and fixing of grab handle of total length of 24 \\" with stainless steel fastners for fixing on wall including labour drilling machine etc. complete in all respects as per satisfaction of EIC. (N.S.) |
| 72 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require White Vitreous China Flat back wash basin size 550x 400 mm with single (DSR No. 17.7.4) |
| 73 | Providing and fixing of Urinal Partition 10mm thick Toughned Glass frosted both sides of size 3x1.5 fixed in position with clamps holdings the glass. All exposed edges to be grined with smooth finish to the entire satisfaction of Engineer in charge including carriage of materials to site of work (N.S.) |
| 74 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. (DSR No. 17.31) |
| 75 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.External work 25 mm dia nominal bore (DSR No. 18.12.3) |
| 76 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank (DSR No. 18.48) |
| 77 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of size as approved by Engineer-in-Charge in skirting, risers of steps anddados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarsesand) and jointing with grey cement slurry @ 3.3kg per sqmincluding pointing in white cement mixed with pigment of matching shade complete. Make: Spenza, Johnson& johnson, kajaria, Cera etc. (DSR No.11.37.A) |
| 78 | Providing and fixing of MS Gate of suitable size with 2 mm thickness MS sheet supported by 25 X 5 mm MS flat and angle of size 35 X 35 X 5 mm with frame angle 40 X 40 X 5 mm including provision of dead lock complete in all respect as per satisfaction of EIC. (N.S.) |
| 79 | Providing and fixing of CP stainless steel bib cock, Pressmatic Taps of approved make complete in all respect as per the entire satiusfaction of Engineer in charge. (N.S.) |
| 80 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour,weighing not less than 105 gms (DSR No. 17.71) |
| 81 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete (DSR No. 18.18.3) |
| 82 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe (DSR No. 17.28.1) |
| 83 | Providing and fixing of exhaust fan of 12\\" of reputed make with metallic blades make of Crompton/Bajaj heavy duty complete in all respect as per the satisfaction of Engineer in charge. (N.S.) |
| 84 | Providing and placing HDPE waste cantainer for wet and dry waste of capacity 20 Ltr with foot pedestal operated opening lid (N.S.) |
| 85 | Credit against old material |
| 86 | Part - C Electrical Work (Detailed estimate submitted by EE Electrical Divison Vide Memo No. P- 620003 dated 26.02.2026) |
| 87 | Wiring for light point/ fan point/ exhaust fan point with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable in recessed heavy duty PVC conduit ISI marked with modular switch, modular plate, blanking plate if required, suitable size GI box and earthing the point with 1.5 sq mm FRLS PVC insulated copper conductor single core cable including GI Box, Concealed Light Box, Modular switch socket & 5/6A Switch single pole etc complete as required. Make of switch/plate: Legrand , Hager, Norysis, Captree, Schneider. Make of Cable: Finolex/Polycab/Havells/KEI Group - C (DSR No.1.10.3) |
| 88 | Wiring for circuit/ submain wiring along with earth wire with following sizes of FRLS, PVC insulated copper conductor, single core cable in surface/recessed heavy duty PVC conduit including cutting the wall and making good the same in case of recessed conduit as required. Make of cable: Finolex/Polycab/Havells/KEI Pipe Make of PVC pipe: Diplast, BEC,AKG. 2 x 2.5 sq mm + 1 x 2.5 sq mm as earth wire (DSR No.1.14.2) |
| 89 | Supplying and fixing of following size of heavy duty ISI marked PVC conduit alongwith accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. Make of PVC pipe: Diplast, BEC,AKG. 25 mm (1.21.2) |
| 90 | Supplying and fixing suitable size Gl box with modular plate and cover in Front on surface or in recess, including providing and fixing 6 pin 5/6A & 15/16 A modular socket outlet and 6 pin 5/6A &15/16 A modular switch, connection etc. as required. Make: Hager,Legrand, Northwest Wipro, Norysis, Captree, Schneider.(DSR No.1.32) |
| 91 | Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ woodenblock including connection etc. as required. (DSR No.1.33) |
| 92 | MODULAR GI BOXESSupplying and fixing following sizes / modules, GI box along with Modular base & cover plate for modular switches in recess etc as required. Make: Legrand, Hager, Norysis, Captree, Schneider. (DSR No.1.27) |
| 93 | 3 Module (100mm x75 mm) (DSR No.1.27.2) |
| 94 | 6 Module (200mm x 75mm) (DSR No.1.27.4) |
| 95 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connectioN.S (M.R) but excluding modular plate etc. as required. Make: Legrand, Hager, Norysis , Captree, Schneider.(DSR No. 1.24) |
| 96 | 3 pin 5/6 amp switch outlet (DSR No.1.24.1) |
| 97 | 15/16 amps switch outlet (DSR No.1.24.3) |
| 98 | 3 pin 5/6 amp socket outlet (DSR No.1.24.4) |
| 99 | 15/16 amps socket outlet (DSR No.1.24.5) |
| 100 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.Make: Legrand, Hager, Norysis , Captree, Schneider. (DSR No.1.25) |
| 101 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.Make: Finolex/Polycab/Havells/KEI. (DSR No.1.17) |
| 102 | 3x 1.5 sq. mm (DSR No.1.17.3) |
| 103 | 3x 2.5 sq. mm (DFSR No.1.17.12) |
| 104 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole Make: Seimens, Schneider, Legrand, L&T, Hager. (DSR No. 2.10.1) |
| 105 | Supplying and fixing 32 amps rating, 240/415 volts, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Double Pole Make: Seimens, Schneider, Legrand, L&T, Hager. (DSR No. 2.10.3) |
| 106 | S/F TPN MCB Supply and Fixing following rating, four pole, 415 volts, MCB TPN with box complete with connections tensing and commissioning etc as required. Make: Seimens, Schneider, Legrand, L&T, Hager. The work shall be executed to the entire satisfaction of Engineer in charge. 63 Amps (DSR No.2.1.2) |
| 107 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 6 way (4 + 18), Double door Make: Seimens, Schneider Acti 9., Legrand, L&T, Hager, (DSR No.2.4.2) |
| 108 | Providing and fixing 250 A 36 KA rating and breaking capacity MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 250 A, 36 kA 4Pole Make: ABB, Havells, Schneider, Legrand, L&T, Hager. (DSR No.2.2.16) |
| 109 | P/F of LED luminarie of size 2'x2' of 30-36 watt (595x595 mm) recess type including driver with minimum system efficacy of minimum 120 lm/W. THD <10%, PF > 0.95, Having coloured temperature 4000-6500 K recess type suitable to be fixed in Armstrong/ grid ceiling. The fitting should provides soft light and glare free symmetrical illumination and is to be fixed in the existing false ceiling frame of make Havells/ Wipro/ Twinkle/ Surya/ Phillips/ Bajaj alongwith connection, testing and commissioning erc. This job also includes all petty material required to be entire satisfaction of Engineer-in-charge. Warranty:- The fixture should be comprehensively warranted to be repaired or replaced for any defect within 2 years of installations. (DSR No. 8.6.4) |
| 110 | P/F of LED luminarie of size 2'x2' of 30-36 watt (595x595 mm) surfce type including driver with minimum system efficacy of minimum 120 lm/W. THD <10%, PF > 0.95, Having coloured temperature 4000-6500 K recess type suitable to be fixed in Armstrong/ grid ceiling. The fitting should provides soft light and glare free symmetrical illumination and is to be fixed in the existing false ceiling frame of make Havells/ Wipro/ Twinkle/ Surya/ Phillips/ Bajaj alongwith connection, testing and commissioning erc. This job also includes all petty material required to be entire satisfaction of Engineer-in-charge. Warranty:- The fixture should be comprehensively warranted to be repaired or replaced for any defect within 2 years of installations. (DSR No. 8.6.4) |
| 111 | Supply & Erection of 2x18 watt retrofit LED tube rod with batten Supply & Erection of 2x18 watt retrofit LED tube rod with batten made of aluminium housing with PC diffuser Lumen out put should be more than 100 lumens per watt (1800 LUM) with LM 79 report from NABL. The make of the fittings should be Havells/ Wipro/ Twinkle/ Surya/ Phillips/ Bajaj . The work shall be executed to the entire satisfaction of Engineer-in-Charge. (N.S.) |
| 112 | S/E of M.S. angle iron bracket of size40x40x6mm for installation of flood lights.The bracket should be painted with the coats of superior quality paint. The job includees all the material, labour including making holes in the bracket to fix the flood light fittings etc complete in all respect. The work shall be executed to the entire satisfaction of Engineer-in-charge. (N.S.) |
| 113 | S / E of ceiling fans complete with aluminium blades, plastic canopies 2 Nos. double bal bearing, MS hanging rods, condenser, reels, clamps etc. The body of fan and blades should be white in colour. The job includes the cost of making necessary connections from the adjacent light point with 1.5sq.mm single core copper conductor cable. The sample of fans shall be got approved from the Engineer-in-charge of work before installation at site. The job also includes the cost of carriage, erection, testing, commissioning of fan, all labour and petty material required to complete the job to the entire satisfaction of the Engineer-in-Charge.[Size56\\" 1400mm sweep ceiling fan of Havells make Velocity White / Orient make Summer Breeze Crompton make Cool Breeze / Usha make Apollo Bajaj make Sabse. Tez only (N.S.) |
| 114 | Supply and Erection of Exhaust fan (heavy duty motor with copper wound metallic body) following size complete with motor, mettalic blades, double ball bearing with minimum power consumption, rigid frame with rubber mounting for silent operation,epoxy powder coating along with mettalic louver to be installed in the existing opening including cost of making the hole to suit the size of above fan making good the damage, Carriage charges connection, testing, commissioning etc. as required to complete the job to the entire satisfaction of EIC. Size 12\\" Sweep 900 RPM with louver of Havells make Turbo Force SP/ Orient make Industrial heavy duty / Crompton make HDEF EXHD 300- 6-1 / Bajaj make Supreme DLX only. (N.S.) |
| 115 | P/F of heavy duty Air Circulator Wall fans of size 450 mm, RPM 1400± 5%, power input 120-130 watt, 220-240 volt, 50Hz single phase, 3 speed of Make Crompton/ Havells/ Phillips/Bajaj/Khaitan. (N.S.) |
| 116 | Supply and Erection of Fan Rod 4feet to hang fan. (N.S.) |
| 117 | Providing & Fixing Cable Junction box of size 250x200x100mm complete in all respect. The job included fixing of Junction box on the wall with all petty material as required. The work shall be executed to the entire satisfaction of Engineer-in-Charge. Make: Sintex, Hensel, Rittal (N.S.) |
| 118 | Supplying, installation, Testing and Commissioning of Split Type AC 2.0 Ton, 3 Star Rating. The AC shall be Suitable for 230 +/- 10% volts, 50 Hz Ac supply. The AC EER not less than 3.55 supply with Copper condenser. 2.0 Ton Capacity of nominal cooling capacity 6000 kilo calories/Hr./24000 BTU/Hr. with permissible variation of +/- 10%. Room discharge air flow 650 cfm indoor Nosie level not exceed 50 db. Refringent 410 A. and complete to the entire satisfaction of Engineer-in-charge. . Make:- DAIKIN/VOLTAS/CARRIER/HITACHI. (N.S.) |
| 119 | Supplying and fixing voltage stabilizer 5 KVA for AC of 2 Tn and above with MCB, TDR volt meter copper winding input range 180-250 volt single phase including cost of copper wire from stabilizer to A.C unit with M.S body of 22 gauge sheet powder coated). Cost includes 15A plug top. Make DEOL/ VGUARD. (N.S.) |
| 120 | Providing and fixing of 28 gauge copper piping between indoor & outdoor unit complete with sleeve type Kini insulation including the cost of chasing of brick wall, RCC & repairing the same in good conditions as per site requirement to the size & design of manufacture.size of copper pipe 5/8\\"x3/8\\". (N.S.) |
| 121 | Providing & Fixing PVC rigid drain pipe 20mm (3/4\\") dia of Diplast/ finolex/supreme make of complete in all respects from indoor unit to disposal points as directed by EIC. (N.S.) |
| 122 | Supply and laying of insulated 2 core x 10mm2 aluminium multi conductor twin core flat unarmoured cable to fixed on the suitable clamps and nuts /bolts etc make Cirtina/finolex/ lapp/ polycab/ havell's or its equivalent of ISI marked. The work shall be executed to the entire satisfaction of engineer-in-charge. (N.S.) |
| 123 | Supplying, installation, Testing & Erection of 120 WATT Flood Light, powder coated pressure die cast aluminium body (System lumen efficacy 105 <120 lm/Watt) with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: Input voltage: 140-270 Volt AC, freq 50/60 hz, Operating temp range -5 deg to 50 deg centigrade, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2 , P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection,EMI-EMC as per CISPR -15, lenses for beam angle 30 deg-120deg as per the application and the project requirementdeg., suitable tilt able fitting, life time (LED,Driver & electrical circuitary) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin) , SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). Make: Surya, Wipro, Havells, Bajaj, Panasonic. |
| 124 | Dismantling and re-installation of 30kWp SPV Power plant at Community Centre Mauli Jagran. |
| 125 | Less the cost of old ceiling Fan |
| 126 | Less the cost of old exhaust Fan |
| 127 | Less the cost of old fitting 2'x18' of 36 watt |
| 128 | Less the cost of old MS Box |
| 129 | Less the cost of old of Switch socket |
| 130 | Less the cost of old copper wire |
| 131 | less the cost of old DB including MCCBs Please Enable Macros to View BoQ information |
