|
| 1 | Taking down chowkhat or frame (without taking off shutter from the frame), area of opening n'exc 1.5 Sqm each, removing from the site complete all as specified and directed.Note:- In order to facilitate the taking down of chowkhat or frame with holdfasts, the cost of cutting holes or dismantling of brick/stone/concrete masonary work of any discription in Jambs of existing opening or removing any other fixing arrangement and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4, type B-1 as required so as to re-fix the holdfasts of new chowkhat or frame shall deemed included in quoted unit rates.(ii) Hold fast / fastners shall be measured and paid seperatly in respective item hereunder. |
| 2 | Taking down chowkhat or frame (without taking off shutter from the frame), area of opening exc 1.5 sqm and n'exc 4.00 sqm each, removing from the site complete all as specified and directed.Note:- In order to facilitate the taking down of chowkhat or frame with holdfasts, the cost of cutting holes or dismantling of brick/stone/concrete masonary work of any discription in Jambs of existing opening or removing any other fixing arrangement and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4, type B-1 as required so as to re-fix the holdfasts of new chowkhat or frame shall deemed included in quoted unit rates.(ii) Hold fast / fastners shall be measured and paid seperatly in respective item hereunder |
| 3 | S&F Mild steel door shutter with MS angle iron shutters frame 35 mm X 35 mm X 5 mm in two panel covered with 1.25 mm thick MS plain black sheet welded to shutter with 2 Nos sliding door bolt of 16 mm dia 300 mm long with locking arrangement, 2 Nos of tower bolt of 200 mm long including MS angle iron frame 40mm x40mmx 5mm as in chowkhat with 6 Nos hold fast of flat iron 30mm X5 mm ,200 mm long with bottom flat iron of size 30mmx5mm and 100 mm size 4 Nos butt hinges including necessary cutting, welding, binding as required with two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces complete all as specified and directed by Engineer-in-charge. [Single shutters of approx width0.8 to 1.2 m and ht 1.9 to 2.10 M.] |
| 4 | M&L for mild steel framed work such as grills gratings, sunshed cover fixed with nut bolts incl,cutting drilling holes etc., with ends of bars shouldered and/ or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed baluster, walk ways, railings, framedwork or water tanks and similar work conforming to Fe 290 Gde E 165 complete all as specified and directed. |
| 5 | S&F Solid PVC door frame of size 50mmX47mm made out of 5mm single side prelam PVC sheet used instead of plain colour PVC sheet (edges will be painted to match with prelam sheet) reinforced with MS square tube, suppling & fixing in opening as per specification.Note: Tha cost of fastners (10mm dia, 100mm long, min 6 Nos.) shall be deemed included in quoted unit rates. |
| 6 | S&F factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6mm raised panel design with 5 mm thick moulded PVC sheet on the front face & 5mm prelam PVC sheet on back face, supplying & fixing in frame at site complete all as specified and directed. |
| 7 | S&F fixed type ventilators aluminium powder coated of frame size 50.80X 25.40mm,1.5 mm thick half portion will be fixed with 4mm thick frosted glass and half portion will be fixed with louvers with 4mm thick frosted glass with rubber gasket and aluminium beading ,aluminium wire mess 0.36 mm dia and width of aperture 1.45mm to be fixed over louvers portion only including necessary cutting holes on wall and fixing arrangements complete all as specified and directed. (Al. section thickness 1.50 mm } |
| 8 | S&F aluminium windows sliding type three track powder coated consisting of frame bottom with gutter of size min 92.34 X 32mm side and top of size min 92.34X29.70, shutters vertical 39X20 mm, shutter top & bottom of size min 20X39 mm , shutter interlock min size 39X20 mm with rollers and conceled locking arrangements with 4 mm thick tinted glass with rubber gasket,brush and aluminium beading ,aluminium wire mess 0.36 mm dia and width of aperture 1.45 mm etc including necessary cutting holes on wall and floor and confirming to IS complete all as specified and directed. (Al. section thickness 1.50 mm } |
| 9 | S&F 105 mm X 60 mm size pressed steel frames for door with one or more rebates including necessary lugs, hinges, lock strike plate etc, one shop coat of red oxide primer, filing PCC (1:3:6), type C-0 (using 12.5 mm graded store aggregate) in hollow portion of frame and two coat of synthetic enamel paint after preparation of primed surface complete all as specified and directed.Note: The cost of lugs, hinges, lock strike plate etc, shop coat, synthetic enemel paint and PCC filling work shall be deemed included in quoted unit rates. |
| 10 | S&F 125 mm X 60 mm size pressed steel frames for door with one or more rebates including necessary lugs, hinges, lock strike plate etc , one shop coat of red oxide primer, filing PCC (1:3:6), type C-0 (using 12.5 mm graded store aggregate) in hollow portion of frame and two coat of synthetic enamel paint after preparation of primed surface complete all as specified and directed.Note: The cost of lugs, hinges, lock strike plate etc, shop coat, synthetic enemel paint and PCC filling work shall be deemed included in quoted unit rates. |
| 11 | M&L for 2nd class hardwood (Sal) as in scantlings, timber clean sawn, 40Sqcm and over in section, framed and fixed including two coats of synthetic enamel paint over a coat of pink primer (after preparation of surface) and dismantling existing scantlings of any discription in any position complete all as specified and directed. |
| 12 | M&L for 30mm thick flush shutters , solid core construction, with block board core and plywood face panels, commercial type on both sides fixed to fram including applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.Note: The cost of synthetic enemel paint and primerwork shall deemed included in quoted unit rates. |
| 13 | M&L for 2nd class HW (Teak) glazed and skeleton shutters ( factory made), 35 mm thick open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chemfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, cla-use 8.24 (a); for doors supplied and fitted to chowkhats including two coats of synthetic enamel paint over a coat of pink primer (after preparation of surfaces complete all as specified and directed.Note: (i) The cost of synthetic enemel paint and primerwork shall deemed included in quoted unit rates.(ii) The glass and wire gauge shall be measured and paid seperatly under respective iteme here under. |
| 14 | S&F 150mm size extruded aluminium alloy handle, fabricated type, anodised complete all as specified and directed. |
| 15 | S&F 150mm long aluminium anodised barrel tower bolt , extruded section complete all as specified and directed. |
| 16 | S&F100mm long extruded aluminium alloy butt hinges with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed. |
| 17 | S&F 150 mm long door stopper made of aluminium alloy body and tongue, anodised fixed in door with stainless screws etc complete all as specified and directed. |
| 18 | S&F 150mm long mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 19 | S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 20 | M&L for two coats of synthetic enameled paint over a coat of red oxide including preparation of new steel surfaces of any description over 10 cm width or girth complete all as specified and directed. |
| 21 | S&F galvanised mild steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.45mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 22 | Taking down cement plaster on brick work or stone walls, etc incl raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 23 | M&L for 20mm thick cement plaster on brick / concrete/ stone surfaces in two coat (Ist coat 15mm thick in CM 1:6 and 2nd coat 5mm thick in CM 1:4 mixed with liquid WPC @ 200ml Per liter) complete all as specified and directed.Note:-WPC will be paid seperately under respective item. |
| 24 | M&L for 15 mm thick rendering in cement mortar (1:6) on brick / concrete/ stone walls, surfaces finished even and fair without using extra cement including taking down of existing plaster of any discription, complete all as specified and directed. |
| 25 | M&L for 5 mm thick plastering in cement mortar (1:3) on ceiling, surfaces finished even and smooth without using extra cement including taking down of existing plaster of any discription complete all as specified and directed. |
| 26 | M&L for Brickwork with old size sub class 'B' bricks, straright or curved on plan exc 6m mean radius, built in Cement mortar 1:6 complete all as specified and directed. |
| 27 | M&L for Brick work with old size sub class 'B' bricks, straight or curved on plan in half brick thick wall built in Cement mortar 1:4 complete all as specified and directed. |
| 28 | Demolition of brick work or stone/ boulder masonry work built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and as directed. |
| 29 | M&L for 3 coats of white wash on newly plastered wall surfaces including preparation of surfaces complete all as specified and directed. |
| 30 | M&L for two coats of acrylic exterior emulsion paint over and including one coat of exterior primer on prepared surfaces of wall complete all as specified and directed.Make : Asion(Appex Altima)/ Burger(weather coat all Gaurd)/ Nerolac(Excel total)Note : (i) The emulsion used shall be of approved colour by GE diluted as per manufacturer's instructions(ii) Contractor shall ensure washing floors, cleaning glass , joinery , electric fitting, etc after painting work with entire setisfection of Engg-in-charge. |
| 31 | M&L for two coat of acrylic interior emulsion paint over and including one coat of interior primer on prepared surfaces of wall complete all as specified and directedMake : Asion(Apcolite)/ Burger(self breath easy)/ Nerolac(nerolac Immpession HD)Note : (i) The emulsion used shall be of approved colour by GE diluted as per manufacturer's instructions(ii) Contractor shall ensure washing floors, cleaning glass , joinery , electric fitting, etc after painting work with entire setisfection of Engg-in-charge. |
| 32 | M&L for 3 coats of white wash on newly plastered ceiling surfaces including preparation of surface complete all as specified and directed. Note : Contractor shall ensure washing floors, cleaning glass , joinery , electric fitting, etc after painting work with entire setisfection of Engg-in-charge. |
| 33 | M&L for one coat of white wash on old decorated surface of ceiling including preparation of surface (i.e brooming down with steel wire brushes scraping down moulds moss and efflorescent salts and treating oil and greasy spots, removing of nails, making good holes , craks etc) and washing floors, cleaning glass , joinery , electric fitting, etc after painting work complete all as specified and directed.Note : Contractor shall ensure washing floors, cleaning glass , joinery , electric fitting, etc after painting work with entire setisfection of Engg-in-charge.. |
| 34 | M&L for two coat of white wash on old decorated surface of walls including preparation of old surface i.e brooming down with steel wire brushes scraping down moulds moss and efflorescent salts and treating oil and greasy spots, removing of nails, making good holes , craks etc and washing floors, cleaning glass , joinery , electric fitting, etc complete all as specified and directed.Note : Contractor shall ensure washing floors, cleaning glass , joinery , electric fitting, etc after painting work with entire setisfection of Engg-in-charge.. |
| 35 | M&L for complete removal of existing treatment from old painted/ treated walls by any means ( mannual of mechenical) with entire setisfection of Engg-in-charge and making surface free from all dert/ dust and ready to receive the next propritory putty coat complete all as specified and directed. |
| 36 | M&L for complete removal of existing treatment and appllying water based premium acrylic smooth exterior emulsion of approved colour with silicon additive excellent dirt pickup resistance with low VOC less than 50, Antifungal/ Anti Algai properties in two coats not less than 1.79 litre(undiluted)/10 Sqm diluted with water as per manufacturer's instruction over and including one coat of exterior primer over and including 1mm thick wall care putty on old plastered surface complete all as specified and directed. |
| 37 | S&F in repair 25mm dia stainless steel (202 Grade) curtain rod not less than 0.70mm thick with end caps (Latoo) and brackets complete all as specified and directed.Note : In openings exceeding 1.2m wide, additional brackets shall be provided so as the distence between two consecutive brackets shall not exceed 1.2m. |
| 38 | M&L for GI tubing 15 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors including taking down existing tubing of any discription complete all as specified and directedNote : Cutting chases and making good shall be measured and paid seperatly under respective item here-in-after. |
| 39 | M&L for 20 mm outer dia CPVC pipes, SDR 11 grade including fittings on walls/ceiling or laying in floors including taking down existing tubing of any discription complete all as specified and directed.Note : Cutting chases and making good shall be measured and paid seperatly under respective item here-in-after. |
| 40 | M&L for GI tubing 20 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors including taking down existing tubing of any discription complete all as specified and directedNote : Cutting chases and making good shall be measured and paid seperatly under respective item here-in-after. |
| 41 | M&L for cutting chases, pinning in, in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring etc. and making good, in cement mortor 1:3 cutting not exceeding 10cm in girth complete all as specified and directed. |
| 42 | S&F in repair 110mm dia PVC(SWR) pipes single socketed, in any length with rubber ring joints,fixed to walls complete all as specified and directed. |
| 43 | S&F in repair 75 mm dia PVC(SWR) pipes single socketed, in any length with rubber ring joints,fixed to walls complete all as specified and directed. |
| 44 | S&F in repair 75 mm dia PVC(SWR) pipes single socketed, in any length with rubber ring joints,laid in trenches or in floors complete all as specified and directed. |
| 45 | S&F 110mm dia PVC(SWR) bends any radious complete all as specified and directed. |
| 46 | S&F 75 mm dia PVC(SWR) bends any radious complete all as specified and directed. |
| 47 | S&F 110mm dia PVC(SWR) junction, single (single T/Y ) equal or unequal any radious , with acces door, complete all as specified and directed. |
| 48 | S&F 75 mm dia PVC(SWR) junction,single (single T/Y ) equal or unequal any radious.with acces door, complete all as specified and directed. |
| 49 | S&F in reapir 110mm dia PVC(SWR) vent cowl, complete all as specified and directed. |
| 50 | S&F in repair 75 mm dia PVC (SWR) floor trap, plain with CP grating including jointing with solvent cement complete all as specified and directed. |
| 51 | S&F 15mm dia angle cock fancy type chromium plated,cast copper alloy, with wall flange, srewed for iron pipe including taking down exsiting angle cock of any discription complete all as specified and directed.Make : Jaquar ( Cat Part No ARI-CHR-39053) /Cera(Cat part No F1005201)/Johnson (Cat part No. T3210C) |
| 52 | S&F 15mm dia bib tap fancy type chromium plated,cast copper alloy, with wall flange, srewed for iron pipe including taking down exsiting bib tap of any discriptioncomplete all as specified and directed.Make : Jaquar ( Cat Part No ARI-CHR-39037) /Cera(Cat part No F1005151)/ Johnson (Cat part No T3205C) |
| 53 | S&F over head rain shower with arm brass chromium plated, 150/200 mm in size including fixing to steel pipe including taking down exsiting shower rose and arm of any discription complete all as specified and directed.Make : Jaqguar ( Cat Part No.: Shower- F7010111SS, Arm -SHA-483)/Cera(Cat part NoShower- OHS-1667, Arm -F7040104)/Johnson (Cat part No Shower-S1740C, Arm -S0001C5) |
| 54 | S&F WHB mixer, brass chromium plated, fancy type for mixing hot & cold water screwed down for 15mm bore iron pipe including taking down exsiting mixer / pillar tap of any discription complete all as specified and directed.Make : Jaquar ( Cat Part No ARI-CHR-39005B) /Cera(Cat part No F1005451) /Johnson (Cat part No T3245C) |
| 55 | S&F Wall mixer 3-in-1, brass chromium plated, fancy type for mixing hot & cold water screwed down for 15mm bore iron pipe including taking down exsiting mixer /taps of any discription complete all as specified and directed.Make : Jaquar ( Cat Part No ARI-CHR-39145) /Cera(Cat part No F1005424)/Johnson (Cat part No T3223C) |
| 56 | S&F in repair 32mm bore dia bottle trap size with 300 mm & 190mm wall connection pipes & wall flange with colour: Blush Gold PVD (Colour Rose Gold) incl required concealed pipe upto trap with required accessories complete in all respect as specified and directed by Engr-in-charge. Make Jaquar (Cat Part No ALD-BGP-769LX300X190, Cera (Cat Part No F4065103RG), Kohler (Cat Part No K-7314IN-RGD). |
| 57 | S&F CP brass single lever high flow diverter consisting concealed body, Exposed part kit and bath spout Make of Jaquar (Cat Part No OPP-CHR-15079NKPM, ALD-079N AND SPJ-15429PM), Kohler Cat Part No K-77310IN-4FP-CP, Body Cat No K-99924IN-CPRGD, Grohe Cat No 2919001, Body Cat No 33963000 and spout K-99061IN-CP OR Ghrohe Cat No 29 039 000, body cat No and spout Cat No 13258000 etc complete as specified and directed. Note : Contractor shall provide 10 year warrantee certificate and Manufacturer’s test certificate including copy of invoice of each item. |
| 58 | S&F CP brass double coat hook Jaquar Cat No CAN-CHR-1161M, or Kohler Cat No K-25073IN-CP, Grohe Cat No 4046100 for complete as directed by Engineer-in-charge. Note : Contractor shall provide 10 year warrantee certificate and Manufacturer’s test certificate including copy of invoice of each item. |
| 59 | S&F Soap dish brass chromium plated fixed with pvc rawal plugs and screw, including taking down exsiting mixer / pillar tap of any discription complete all as specified and directed.Make : Jaquar ( Cat Part No. CPA-CHR-1131) /Cera(Cat part No F5015116CH/Johnson (Cat part No T1352C) |
| 60 | S&F Single towel rail 600mm long, stainless steel make Jaquar Cat No ACN-CHR-1111SM or Kohle Cat No K-25065IN-CP or Grohe cat No 40459001 etc complete as directed by Engineer-in-charge. Note : Contractor shall provide 10 year warrantee certificate and Manufacturer’s test certificate including copy of invoice of each item. |
| 61 | S&F Towel rack 600mm long without lower hangers but with 3 hooks, stainless steel, Make Jaquar Cat No ACN-CHR-1181FHS or Kohler Cat Part No K-17529T-CP etc complete as directed by Engineer-in-charge.Note : Contractor shall provide 10 year warrantee certificate and Manufacturer’s test certificate including copy of invoice of each item. |
| 62 | S&F Stainless Steel Peg Set of 6 hooks ISI marked medium weight including taking down exsiting mixer / pillar tap of any discription complete all as specified and directed. |
| 63 | S&F in repair rotational moulded poly-ethylene water storage tanks (cylinderical vertical with closed top), 500 litres capacity, triple layer in construction white in colour hoisted and fixed in position and dismantaling of old tank ( any discription and capicity) complete all as specified and directed.Make : Sintex / Supreme(Siltank) / Plasto |
| 64 | Disconnecting existing water tanks, setting aside (or lowering if required) for Cleaning and removing all scale and dirt etc. from tanks and from mouths of circulating pipes etc capacity of tank and reconnecting and refixing in position capacity of tank exc 250 and n.exc 500 ltr. complete all as specified and directed. |
| 65 | S&F 20mm PTMT float valve assembly including assessories complete all as specified and directed. |
| 66 | S&F in repair gun metal globe /valve with iron wheel head screwed both ends for iron pipe of 20mm bore, complete all as specified and directed.Make : Zoloto/LeaderAtam/VIR |
| 67 | S&F kitchen sinks with drainage board, made out of 304 grade 0.8mm/1.0mm thick stainless steel sheet with ;plugs, washers, and waste pipe including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets, and connecting union to pipe including taking down exsiting sink of any discription complete all as specified and directed.Make : Nirali (Popular range-SMALL-glossy finish) /Cera(Cat part No B4512122-glossy finish)/Johnson (Cat part No K030206SBG) |
| 68 | S&F Stainless steel Plate Rack, 900mmx600mmx250mm in size, made of 1mm thick 202 grade stainless steel sheet including taking down exsiting Plate rack ( any discription) complete all as specified and directed. |
| 69 | S&F purposely moulded looking mirror 5mm thick glass fixed with studs complete all as specified and directed.Make : Saint-Gobin/Modi Guard/Asahi India (AIS) Please Enable Macros to View BoQ information |
| 70 | S&F purposely moulded looking mirror 5mm thick glass fixed with studs complete all as specified and directed.Make : Saint-Gobin/Modi Guard/Asahi India (AIS) Please Enable Macros to View BoQ information |
