Tender For Urgent Repair/Renovation And Addition/Alteration Of Various Pwd( R&B ) Buildings Falling Under The Jurisdiction Of Pwd (R&B) Division Thathri During The Financial Year 2026-27., Thathri-Jammu And Kashmir

TDR : 55333156

Tender Notice
BOQ

3 Days Left

Thathri , Jammu And Kashmir

Tender Brief : Tender For Urgent Repair/Renovation And Addition/Alteration Of Various Pwd( R&B ) Buildings Falling Under The Jurisdiction Of Pwd (R&B) Division Thathri During The Financial Year 2026-27.

Document Fees
₹ 600 /-

EMD
₹ 20000.0 /-

Tender Value
Refer document

Submission Date
25-05-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Demolishing cement concrete manually / by mechanical means including disposal of material within 50 meters lead as per direction of Engineer incharge: 1:4:8 or leaner mix (i/c equivalent design mix)
2	Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge.
3	Extra for cutting reinforcement bars manually / by mechanical means in RCC or R.B work (payment shall be made on the cross sectional area of RCC or R.B Work)
4	Extra for scrapping, cleaning and straightening reinforcement from R.C.C. or R.B. work
5	Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar
6	Removing mortar from bricks and cleaning bricks incl. stacking with a lead of 50 Mtrs (Stacks of cleaned bricks shall be measured) from brick work in cement mortar
7	Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead :
8	Of area of 3 sqm. and below
9	Of area beyond 3 sqm
10	Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead :
11	Of area of 3 sqm. and below
12	Of area beyond 3 sqm.
13	Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable material within 50 meters lead.
14	Demolishing mud phaska in terracing and disposal of material within 50 meters lead
15	Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead.
16	Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead With cement mortar 1:4 (1 cement : 4 fine sand)
17	Renewing glass panes, with putty and nails wherever necessary including raking out old putty :
18	Float glass panes of thickness 4.0 mm(weight not less than 10kg/sqm)
19	Float glass panes of thickness 5.0 mm(weight not less than 12.5 kg/sqm).
20	Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:
21	1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)
22	1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
23	1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
24	1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) with 20% boulder.
25	1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
26	Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
27	Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
28	Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 5.3.1 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
29	Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand)
30	Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level
31	Extra for brick work/tile brick/AAC block masonry in superstructure above floor V level for each four floors or part thereof by mechanical means:
32	Half brick masonry with common burnt clay (non modular) bricks of class designation 7.5 in foundations and plinth including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand)
33	Extra for half Brick masonry in superstructure above plinth level upto floor V level.
34	Centering and shuttering including strutting, propping etc. and removal of form for:
35	Foundations, footings, bases of columns etc. for mass concrete.
36	Walls (any thickness) including attached pilasters, buttresses, plinth andstring courses etc.
37	Lintel, beams, plinth beams, girders, bressumers and cantilevers.
38	Columns, pillars, piers, abutments, posts and struts.
39	Suspended floors, roofs, landings, balconies and access platforms
40	Edges of slabs and breaks in floors and walls Under 20 cm wide
41	Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.
42	Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
43	Providing and fixing M.S tubular frames for doors, windows, ventilators and cupboard with rectangular /L-type sections, made of 1.60 mm thick M.S Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10cm of C.C. 1:3:6 (1cement : 3 coarse sand :6 graded stone aggregate 20mm nominal size) .
44	Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded
45	Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes.
46	Regrading terracing of mud phaska covered with tiles or bricks, in cement by dismantling tiles or bricks, removing mud plaster, preparing the surface of mud phaska to proper slope, relaying mud plaster gobri leaping and tiles or bricks, grouted in cement mortar 1:3 (1 cement: 3 fine sand), including replacing unserviceable tiles or bricks with new ones and disposal of unserviceable material to the dumping ground (the cost of the new tiles or brick excluded) within 50 meters lead.
47	Raking out joints in lime or cement mortar and preparing the surface for re-pointing or re plastering, including disposal of rubbish to the dumping ground within 50 meters lead.
48	White washing with lime to give an even shade :
49	Old work (two or more coats)
50	Old work (one or more coats)
51	Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
52	Distempering with 1st quality Acrylic/oil bound washable distemper (ready-made) having VOC content less than 50 grams/litre of approved manufacturer and of required shade and colour complete as per manufacturers’ specifications, one or more coats on old work
53	Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
54	Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade, one or more coats on old work.
55	Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work.
56	15mm Cement plaster on the rough side of single or half brick wall of mix:
57	1 : 4 ( 1 cement : 4 fine sand)
58	1 : 6 ( 1 cement : 6 fine sand)
59	12mm Cement plaster of mix:
60	1 : 4 ( 1 cement : 4 coarse sand)
61	1 : 6 ( 1 cement : 6 coarse sand)
62	Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.
63	Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)
64	Finishing walls with water proofing cement paint of required shade: Old work (one or more coats applied @ 2.20 kg/10sqm) over priming coat of primer applied @ 0.80 liters/10sqm complete including cost of priming coat.
65	Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)
66	Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work
67	Painting on G.S sheets with synthetic enamel paint of approved band and manufacture of required colour to give an even shade on New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution.
68	Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
69	1 mm thick
70	2 mm thick
71	Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven storey height made with 40 mm dia M.S. tube 1.5 m centre to centre horizontal and vertical tubes joining with cup and lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffoldings for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc complete as per directions and approval of Engineer-in-charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding.
72	Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.: Internal work (Parkash, Suyra Make) or equivalent (exposed on wall)
73	15 mm dia. nominal bore (Medium)
74	20 mm dia. nominal bore (Medium)
75	25 mm dia. nominal bore (Medium)
76	32 mm dia. nominal bore (Medium)
77	Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) (Parkash, Suyra Make) or equivalent
78	15 mm dia. nominal bore (Medium)
79	20 mm dia. nominal bore (Medium)
80	25 mm dia. nominal bore (Medium)
81	32 mm dia. nominal bore (Medium)
82	40 mm dia. nominal bore (Medium)
83	Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work) (Uniqu/DRP make)
84	15 mm nominal bore
85	20 mm nominal bore
86	25 mm nominal bore
87	32 mm nominal bore
88	40 mm nominal bore
89	Providing & fixing water closet squrating pan (Indian type W.c pan) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.C.V flushing cistern, including flush pipe (of approved make) with manually controlled device (handle ever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C pan of size 580 x 440 mm with integral type foot rests.
90	Providing and fixing white vitrous china pedestal type water closet (European type W.C Pan) with seat and lid, 10 litre low level white P.V.C flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:
91	W.C Pan with ISI marked white solid plastic seat and lid.
92	W.C Pan with ISI marked black solid plastic seat and lid.
93	Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required :
94	White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar taps
95	White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap.
96	Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings
97	Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265mm sizes respectively.
98	Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete: 10 liter capacity -White
99	Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete: White solid plastic seat with lid
100	Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-Charge and finished smooth. White Agaria Marble Stone (18mm)
101	Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain board
102	610x460mm bowl depth 200mm
103	470x420mm bowl depth 178mm
104	Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete:
105	Semi rigid pipe 32 mm dia
106	Flexible pipe 32 mm dia
107	Providing and fixing PTMT pillar cock of approved quality and colour.
108	15 mm nominal bore, 107 mm long, weighing not less than 110 gms.
109	15 mm nominal bore 125 mm long foam flow, weighing not less than 120 gms.
110	Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931
111	Providing and fixing 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms
112	Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931
113	Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid , 10 liter low level white vitreous china flushing cistern and CP flush bend with fittings and C.I. brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid. (Jaquor/Cera make)
114	Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-(a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer (Jaquor/Cera make)
115	Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. (Jaquor/Cera make)
116	Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931 (Jaquor/Cera make)
117	Providing and fixing 15 mm C.P hand shower for W.C of good quality (Jaquor/Cera make)
118	Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 (Jaquor/Cera make)
119	Providing and fixing 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms(Jaquor/Cera make)
120	Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg. (Jaquor/Cera make)
121	Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
122	Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size),inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
123	Extra for depth for manholes Size 90x80 cm With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
124	Constructing brick masonry chamber for underground C.I. inspection chamber and bend with common burnt clay (non modular) bricks of class designation 7.5 in cement mortar 1:4 ( 1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg ) R.C.C. top slab with 1:1 ½ : 3 mix ( 1 cement : 1 ½ coarse sand : 3 graded stone aggregate 20 mm nominal size),foundation concrete 1:5:10 (1 cement: 5 fine sand: 10 graded stone aggregate 40mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design :
125	Inside dimensions 455x610 mm and 45 cm deep for single pipe line-
126	Inside dimensions 500x700 mm and 45 cm deep for single pipe line with one or two inlets
127	Inside dimensions 600x850 mm and 45 cm deep for single pipe line with three or more inlets.
128	Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections 1.63 mm (14 G) thick shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.)
129	For fixed portion. Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15)
130	Powder coated aluminum (minimum thickness of powder coated 50 microns)
131	Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections 1.63 mm (14 G) thick shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.)
132	For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately.) Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15)
133	Powder coated aluminum (minimum thickness of powder coated 50 microns)
134	Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-incharge.
135	Pre-laminated particle board with decorative lamination on both sides.
136	Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side.
137	Repair to aluminium door shutters incl. refixing / fixtures / ACP sheets rubber gasket / aluminium beeding etc complete (Cost of ACP sheet paid separtely)
138	Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in- charge. (Cost of aluminum snap beading shall be paid in basic item.) With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm)
139	Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, having brand logo embossed on the body/plate with double spring mechanism and door weight upto 125 kg for doors including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in- plate etc. complete as per the direction of Engineer-in-charge. With Stainless Steel cover plate minimum 1.25 mm thickness
140	Providing and fixing Brass 100mm mortice latch and lock with 6levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.
141	Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :
142	300x16mm
143	250x16mm
144	Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :
145	200x10mm
146	150x10mm
147	100X10mm
148	Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.
149	125mm
150	100mm
151	Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6mm, with 40mm dia, steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer
152	Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately).
153	Second class Kail wood (30mm thick)
154	Second class Kail wood (35mm thick)
155	Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.
156	Particle Board 12mm thick. Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS : 3087 marked
157	Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side, Grade I, Type II IS : 12823 marked
158	Pre-laminated particle board with decorative lamination on both sides, Grade I, Type II IS : 12823 marked
159	Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : Second class Kail wood (35mm thick)
160	Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete: 2nd class Kail wood
161	50 x 12 mm
162	50 x 20 mm
163	Providing and fixing wooden moulded corner beading of size 50x50 mm (base and height) of triangular shape to the junction of paneling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete. Second class kail wood
164	Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS:277 and consisting of angle cleats of size 25 mm widex1.6mm thick with flanges of 27mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm diax40mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.5mm of required length with nuts & bolts of required size and other end of angle hanger fixed with G.I. channels 45x15x0.9 mm running at the spacing of 1200 centre to centre, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having clips of 10.5 mm at 450mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64mm diaX230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre to centre, with 25mm long drive-all screws @ 230 mm interval ,including fixing of gypsum board/calcium silicate board to ceiling section and perimetre channel with the help of dry wall screws of size 3.5x25mm at 230mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the gypsum board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers’ specification and also including the cost of making openings for light fittings, grills diffusers, cutouts made with frame of perimetre channels suitably fixed all complete as per drawing and specification and direction of the Engineer-in-Chargebut excluding the cost of painting with:
165	8 mm thick Calcium Silicate Board made with Calcareous and Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process.
166	Providing and fixing tiled False Ceiling of specified materials of size 595x595mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms/sqm both side inclusive ) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main “T” at 600mm center to center to form a grid of 1200 x 600mm and secondary cross “T” of length 600mm and size 24x25 mm made of 0.30mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 24x24x0.30mm and laying false ceiling tiles of approved texture in the grid including, wherever, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27x37x25x1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash fasteners, 4mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.8 mm spaced at 1200mm center to center along size 85x30x0.8 mm spaced at 1200mm center to center along main T, bottom exposed width of 24mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.
167	12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard manufactured from natural gypsum as per IS 2095 part-I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit.
168	Providing and laying water proofing treatment on Roofs of slabs by applying Chryso TAPELASTIC - consisting of following operations: - a) Cleaning of RCC to remove dust and loosely adhering particles completely. Fill the Pinholes, visible cracks and gaps of pipe with polymer repair mortar 1:2:4 cement - sand mortar, mixed with CHRYSO ARMOURCRETE. Application of 1:2:4 cement - sand mortar, mixed with CHRYSO ARMOURCRETE - as a coving at the corners of floor and the vertical surface in the sunken area, and between floor and walls in the remaining area. After surface preparation, first layer of CHRYSO TAPELASTIC - Two component Elastomeric high performance cementitious waterproof coating @ 0.750 gram per /sqm.. b) Laying and sandwich layer of Fibre glass cloth when the first coating is still green. c) Second layer of 1.5 mm thickness Chryso TAPELASTIC - Two component Elastomeric high perfornamce cementitious waterproof coating @ 0.750 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall. d). Providing and laying screed concrete (1:2:4) of 50 mm thickness admixed with Chryso STRUCO EXCEL - Intergal waterproofing compound over the CHRYSO TAPELASTIC applied surface on roof, so as to achieve a minimum slope of 1:100 for proper run off of rain water. Minimum thickness near the rain water pipes should be 25 mm. Proper care to be taken while placing screed concrete so as to ensure that the waterproofing membrance is not ruptured.
169	Providing and Laying water proofing treatment in Sunken Portion of WC, bathroom etc by applying CHRYSO TAPELASTIC consisting of following operations : - face preparation Cleaning of RCC to remove dust and loosely adhering particles completely. b) Fill the Pinholes, visible cracks and gaps of pipe with polymer repair mortar 1:2:4 cement - sand mortar, mixed with CHRYSO ARMOURCRETE. c) Application of 1:2:4 cement - sand mortar, mixed with CHRYSO ARMOURCRETE -as a coving at the corners of floor and the vertical surface in the sunken area, and between floor and walls in the remaining area. Application of first coat fo CHRYSO TAPELASTIC - Two component Elastomeric high performance Cementitious Waterproof coating CHRYSO TAPELASTIC - It comes with 2 pack system A pack is polymer and pack B is cement filler to be mixed as per tiechnical data sheet. Waterproof coating onto the prepared surface form continuous film on the floor of the sunken area. Apply second coat of Chryso TAPELASTIC - Two component Elastomeric high performance cementitious Waterproof coating after 5 to 6 hours to first coat take the coating over the vertical surfaces on to the floor and over the coving on to the wall (before tiling) to at least 300 mm above the final finished floor level. The coating shall also be continued on to the inner surfaces of the pipe penetration holes. Two coats shall be applied @ 1.5 kg per/sqm in two coats. d). Curing after application of CHRYSO TAPELASTIC - Two component Elastomeric high performance cementitious waterproof coating initial air drying shall be done for 3-6 hours. During this period, no water should be used orcuring. After a maximum period of 6-8 hours after the final application, moist curing shall be done for the next 2-3 days, either by spraying water or by using wet burlap. During this period, the CHYRSO TAPELASTIC coating at no point of time should be left completely dry or submerged in water. After the moist curing the Chryso TAPELASTIC - Two component Elastomeric high performance cementitious waterproof coating shall be allowed to air dry for 3 days before submersion in water. e). Providing a 12 mm thick cement-sand plaster (1:4) on the water proofing coating by mixing an integral waterproffing compound, CHRYSO STRUCO EXCEL @ 200 GM per bag of cement.
170	Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.
171	40mm thick with 20 mm nominal size stone aggregate
172	50 mm thick with 20mm nominal size stone aggregate
173	Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete. Size of tile 600x600 mm
174	Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding and joints filled with acid and/or alkali resisting cement as per IS:4457, complete as per direction of Engineer-in-charge
175	In flooring on a bed of 10mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand)
176	In dado/skirting on 12mm thick mortar 1:4(1 acid proof cement : 4 coarse sand)
177	Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm
178	Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete.
179	In colour such as White, Ivory, Grey, Fume Red Brown
180	In all colours, shades, except White, Ivory, Fume Red Brown
181	Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, laid on 20 mm thick cement mortar 1:4 (1Cement : 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete.
182	In colour such as White, Ivory, Grey, Fume Red Brown
183	In all colours, shades, except White, Ivory, Fume Red
184	Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
185	Kota stone slab 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm ( average) thick cement mortar 1:3 (1 cement:3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing, polishing and curing complete
186	Disposal of unserviceable dismentled material / waste mulba by mechanical transportation outside Municipal limits incl. cost of loading, unloading, stacking complete (Trolly)
187	Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
188	Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. (Grantine work)
189	Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured)
190	Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete.
191	Fixed to steel windows by welding
192	Fixed to openings / wooden frames with rawl plugs screws etc
193	Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete
194	15mm nominal bore
195	20mm nominal bore
196	Providing and fixing plain, square edged wooden beading 65x12 mm section with screws of approved quality for ceiling 1st class kail wood.
197	Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Second class Kail wood
198	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.
199	15mm nominal outer dia pipes
200	20mm nominal outer dia pipes
201	25mm nominal outer dia pipes
202	Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end)
203	25 mm nominal bore
204	32 mm nominal bore
205	40 mm nominal bore
206	50 mm nominal bore
207	Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal / vertical or curved surface) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required
208	0.50 mm thick with zinc coating not less than 275 gram/m2
209	0.63 mm thick with zinc coating not less than 275 gram/m2
210	Supply of Labour (Mazdoor) for various day to day works as per directions of engineer in charge
211	Supply of Labour (Mason) for various day to day works as per directions of engineer in charge
212	Supply of CARPANTER for various day to day works as per directions of engineer in charge
213	Supply of PLUMBER for various day to day works as per directions of engineer in charge
214	Supply of Welder for various day to day works as per directions of engineer in charge.
215	Providing and fixing 18 mm thick, 150 mm wide pelmet of coir veneer board ISI marked IS: 14842-2000, including top cover of 6mm coir veneer board, nickel plated M.S. pipe 20 mm dia (heavy type) curtain rod with nickel plated brackets including fixing with 25x3 mm M.S. flat 10 cm long fixed to pelmet with hollock wood cleats of size 100mm x 40mmx40 mm on both inner side of pelmet and rawl plugs 75mm long etc. all complete.
216	Providing and fixing aluminum extruded section body tubular type universal hydraulic door closer,(having brand logo with IS: 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete :
217	Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: 1 meter from cutting edge
218	All kinds of soil :
219	Ordinary Rock
220	Hard Rock (Blasting prohibited )
221	Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:
222	All kinds of soil :
223	Ordinary Rock
224	Hard Rock (Blasting prohibited )
225	PVC Pannelling
226	Providing and fixing of PVC Wall panelling of approved quality with frame work all complete as directed by Engineer-In-Charge.
227	Providing and fixing of PVC panelling of approved quality with frame work all complete in ceiling.
228	Providing and fixing of 12 mm thick (saphire 1223) PVC Wall panelling of approved quality with frame work all complete as directed by Engineer-In-Charge.
229	Providing and fixing of 19 mm thick ply board complete job.
230	Providing and fxing of PVC pipes with fittings all Complete
231	PVC pipe of dia 100 mm
232	PVC pipe of dia 75 mm
233	Door Tee (0'-4\\")
234	Door Tee (0'-2-1/2\\")
235	Plain bend (0'-4\\")
236	Plain bend (0'-2-1/2\\")
237	Door bend (0'-4\\")
238	Door bend (0'-2-1/2\\")
239	Floor trap
240	Providing and fixing toilet paper holderC.P. brass
241	Providing and fixing of composite pipe of CPVC all complete job. 15 mm dia
242	Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets 25 mm dia ( heavy type)
243	Providing and fixing of curtains of approved quality and good quality all fittings complete. (4\\" x 9\\")
244	Supply of various items of good quality.
245	Freshner automatically controlled system.
246	Toilet Paper
247	Handwash
248	Wiper
249	Providing and fixing of window blinds of approved quality all fittings complete.
250	Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete:
251	40 mm
252	50 mm
253	65 mm
254	75 mm
255	Providing and fixing of Sun mica of good quality all fitting complete.
256	Providing and fixing of National Emblum of Brass make of good quality.
257	Providing and fixing of valvet cloth for chair/ sofa's all complete.
258	Varnishing with flatting varnish of approved brand and manufacture one or more coats on old work.
259	Special Labour engaged for removing of unhygenic matrial from drains and culverts.
260	Providing, fixing and installation of Flex board (280 GSM) without frames duly primed and painted with two coats.
261	Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge.
262	Providing and laying 80mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machinewith strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge.
263	Supplying and fixing of Executive Chair, including carriages all complete job.
264	Supplying and fixing of Office Chair, including carriages all complete job.
265	Supplying and fixing of Table( 2'x4'-0 ) including all leads and lifts and carriages complete job.
266	Supplying of office Table (3'-0x5'-0') including all leads and lifts and carriages complete job.
267	Supplying and fixing of office Table (5'-0x6'-0') including all leads and lifts and carriages complete job.
268	Providing and fixing of Curtains in different sizes of approved make including necessary fittings and approved by the engineer-in-charge complete Job.
269	Supplying and fixing of Double Bed of size (6'-0x6'-0') including all leads and lifts and carriages complete job.
270	Supplying of Double Blanket of approved. Brand including all leads and lifts and carriages complete job.
271	Supplying of single Blanket of approved.. Brand including all leads and lifts and carriages complete job.
272	Supplying of Double Bed Sheet of approved.. Brand including all leads and lifts and carriages complete job.
273	Supplying of Single Bed Sheet of approved Brand including all leads and lifts and carriages complete job.
274	Supplying of double Bed Quilt of approved Brand including all leads and lifts and carriages complete job.
275	Supplying of single Bed Quilt of approved Brand including all leads and lifts and carriages complete job.
276	Supplying of Mattress of size( 6'-0'x6'-0x0'-6 ) including all leads and lifts and carriages complete job.
277	Supplying of Mattress of size( 4'-0'x6'-0x0'-6 ) including all leads and lifts and carriages complete job.
278	Supplying and fixing of Carpet of including fitting all leads and lifts and carriages complete job.
279	Supplying and fixing of kaleen carpet of including fitting all leads and lifts and carriages complete job.
280	Charges for shamyana Tent including fitting all leads and lifts and carriages complete job.
281	Tent (Area to be measured only Carpet area)
282	Plastic Chair
283	Table
284	ELECTRIC WORK: Wiring for light point/ fan point / exhaust fan point/ call bell point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc as required. (Group-A)
285	Wiring for light point/ fan point / exhaust fan point/ call bell point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, with modular switch, modular plate, suitable GI box earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc as required (Group-A)
286	Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required. (Group-A)
287	Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required.
288	Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 amps & 15/16 amps. modular socket outlet and 15/16 amps modular switch connection etc. as required.
289	Supplying and fixing metal box of 150mm X 75mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 A socket outlet and 5/6 A piano type switch, connections, painting etc. as required.
290	Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 A socket outlet and 15/16 A piano type switch, connections, painting etc. as required.
291	Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, \\"C\\" curve including connections, painting etc. as required.
292	Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
293	Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
294	Wiring for circuit/ sub-main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required.
295	2 x 1.5 Sq.mm + 1 x 1.5 Sq.mm earth wire
296	2 x 2.5 sq mm + 1 x 2.5 sq. mm earth wire
297	2 x 4 sq. mm + 1 x 4 sq. mm earth wire
298	2 x 6 sq. mm + 1 x 6 sqmm earth wire
299	2 x 10 sq. mm + 1 x 6 sq. mm earth wire
300	2 x 16 sq. mm + 1 x 6 sq. mm earth wire
301	4 X 6 sq. mm + 2 X 6 sq. mm earth wire
302	4 x 10 sq. mm + 2 x 6 sq. mm earth wire
303	4 x 16 sq. mm + 2 x 6 sq. mm earth wire
304	Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings).
305	Supplying and drawing following sizes of FRLS PVC insulated copper conductor single core cable in the existing surface/recessed steel/PVC conduit as required.
306	1 x 1.5 sq. mm
307	2 x 1.5 sq. mm
308	3 x 1.5 sq. mm
309	1x 2.5 sq. mm
310	2 x 2.5 sq. mm
311	3 x 2.5 sq. mm
312	1 x 4 sq. mm
313	2 x 4 sq. mm
314	3 x 4 sq. mm
315	4 x 4 sq. mm
316	5 x 4 sq. mm
317	6 x 4 sq. mm
318	1 x 6 sq. mm
319	2 x 6 sq. mm
320	3 x 6 sq. mm
321	4 x 6 sq. mm
322	5 x 6 sq. mm
323	6 x 6 sq. mm
324	1 x 10 Sq mm
325	2 x 10 Sq mm
326	3 x 10 Sq mm
327	1 x 16 Sq mm
328	2 x 16 Sq mm
329	3 x 16 Sq mm
330	Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as
331	1 Pair
332	2 Pair
333	4 Pair
334	Supplying and fixing of ceiling fan of followingsweep with 2.25 mfd condenser and 1'-6\\" down rod on the existing fan hook with necessary connection from ceiling rose to fan using twin core copper wire. 900 mm sweep
335	BEE Star rated copper wounded double ball bearing capacitor start, aluminium body & Metallic blade ceiling fan Conforming to all the performance requirements laid down in IS 374:2019 including all amendments, as applicable ; & Carry BIS licensing (i.e. ISI marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. All as per pre approved by Engineer in charge. 1200 mm Sweep BEE 3 Star rated (service value >=5.0 to< 5.5 )
336	Supplying & fixing of Pedestal Fan 400
337	Supplying and fixing of 400 mm sweep wall mounting fan (oscillating type) on wall with necessary connection as required.
338	Supplying and fixing of following sizes Transair exhaust fan with metal blade complete set on existing holes on wall with necessary connection from ceiling rose to fan.
339	225 mm / 9\\" sweep exhaust fan
340	300mm/12\\" sweep exhust fan
341	380mm/15\\" Heavy duty
342	Supplying and fixing of fan hook (U hook) on celiling with 2 nos. of anchor fastener on both ends with necessary bolts and nuts and mansonry work as required.
343	Supplying & fixing of following way single pole and netural, sheet steel, MCB distribution board, 240 volts, on surface/ recess complete with tinned copper busbar netural busbar, earth bar, din bar, interconnections, powder painted including earthing etc. as required.
344	6 way (Double door)
345	8 way (Double door )
346	12 way (Double door)
347	16 way (Double door)
348	Supplying & fixing of following way horizontal type three pole and netural, sheet steel, MCB distribution board, 415 volts, on surface/ recess complete with tinned copper bus bar neutral buss bar, earth bar,din bar interconnection nection,powder painted including earthing etc. as required.
349	4 Way (4+12), (Double door )
350	6 way ( 4+18), (Double door)
351	8 way (4+24), (Double door)
352	12 way (4 +36), (Double door)
353	Supplying and fixing of following sizes of PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required. (ISI Make).
354	20 mm
355	25 mm
356	32 mm
357	40 mm
358	Supplying and fixing of Following light fitting on ceiling/ wall with necessary connection from as required.
359	Post Light 35 watts
360	IP20 SMD Mid Power LED batten type integrated light fixture made from Powder coated Extruded aluminium housing with in built driver , System lumen efficacy ≥ 110 lm/Watt output, internal surge protection of 2.5 KV with Short & Open circuitprotection ,THD < 10% , P. F.≥0.95, CRI >80 , life time of minimum 50000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) , Maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80) certificate / Report from OEM shall be submitted. All as per pre approved by Engineer in charge.20/22 watt LED 4 feet with min. lumen output (2000- 2200) lm
361	Decorative LED Hanging Light for officer table as apporved by site Engineer
362	LED Batten Tube fitting 600mm size 10/11 watt
363	2x2 Recess Led Panel 595mmX595mm 36 W+/- 1W, Recess mounted fixture with HET PMMA diffuser with minimum system lumen efficacy of 110 lm/W and minimum 3900 lumens with CRCA housing with APFC constant Current driver for proper driving of LEDs and P.F.>0.95 with THD<10% ,CRI 80.The LED with life of 50000 Hrs at L70. The LEDs used in the luminaire shall have CCT of 5700K- 6500K with CRI of minimum 80. The Input voltage range shall be 150V to 270V .The Fixture should have In-built Surge Protection of 3kV. Certification:- LM79 & LM80 test report should be from govt approved Inhouse NABL lab/ government of India authorised lab.
364	Mirror light LED fitting with 9/11W LED lamp
365	Providing and fixing of LED Lamp.
366	Providing and fixing of E-27 LED Light
367	9 watt (warm)
368	9 watt (White)
369	12 watt (warm)
370	12 watt (White)
371	Providing & Fixing of IK08, IP 66 protected LED Street Light Luminaire on existing bracket/pole. Fixture made of powder coated single piece pressure die cast aluminum material with heat dissipation fins on housing with UV stabilized PC (UV stablization report submitted for UV cover ) /Toughened Glass cover and secondary lens on each LED & should be SMD type of 3 to 5 watt each . The System efficacy >=125 lm/ wt and potted driver & has a unique BIS R number with Input Voltage AC 120 to 270 V AC with High voltage Cutoff @>=300 V AC and Auto resetting Safety , Power Factor >0.95 driver Efficiency >85% ,THD(I) <10% Humidity 10% to 90% RH Working Temp -5C to 45C . driver current <750mA. The luminaire shall be BIS certified and Trade mark certified. Life Expectancy Equal or more than 50000 burning hrs with Minimum 70% lumen maintened , CRI >70 and CCT 5700K +355K. Surge protection shall be min ≥ 4 KV internal and min 10 KV external inside driver compartment. driver should be Phase to phase protection of 440 V for 4 Hrs. Manufactures Word Mark/Name Engraved/Embossing on die cast housing to allow traceability/authenticity. Fixture shall be AS PER IS 10322 omplianced.OEM Must have its own in house NABL lab setup for all testing facilities for LED fixtures. LM79/LM80) Certificate/ report with liable warranty of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in charge.
372	LED Street Light fixture with Minimum lumen output 5600 lm
373	High Power LED Flood Light Minimum lumen output 8700 lm
374	LED Street Light fixture with Minimum lumen output 11225 lm
375	Providing & Fixing of IP-20 LED Recessed / Surface Mounted, Round / Sqaure SMD Mid Power LED Downlight with power coated die-cast aluminum housing with UV Stabilized non yellowish Diffuser with BIS complience 2.5 KV surge protected Isolated driver, with Short & Open circuit protection, having efficiency > 85% . System Lumen efficacy of ≥ 110 lm / watt, THD < 10 % , Pf.≥0.95, CRI >80, life time of minimum 50000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K/ 5700°K /6000°K/6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate ( T.C.).Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80) certificate / Report from OEM shall be submitted. All as per approved by Engineer in charge.
376	9 watt.
377	15 watt.
378	18 watt.
379	Providing & fixing of following accessories.
380	5/6 Amp. 3 pinTop
381	5/6 Amp 2 pin Top
382	15/16 Amp 3 pin top
383	Insulation Tape (ISI brand)
384	Electronic Step Type fan Regular (Piano type)
385	Celing Rose
386	2.2/3/3.5 mfd fan condenser
387	Brass batten/ angle holder including (Modular) connection etc. as required.
388	Dimmer Type Regulator (with numbering)
389	5/6 Amp combined
390	15/16 Amp combined
391	Toolkit comprises of plier, screw driver and Phase tester
392	Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.
393	1 or 2 Module (75mm x 75mm)
394	3 Module (100mm x 75mm)
395	4 Module (125mm x 75mm)
396	6 Module (200mm x 75mm)
397	8 Module (125mm x125mm)
398	12 Module ( 200mm x 150mm)
399	Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.
400	1 or 2 Module
401	3 Module
402	4 Module
403	6 Module
404	8 Module
405	12 Module
406	Supplying and fixing following piano type switch/ socket on the existing box/ cover inculding connection etc. as required.
407	5/6 amp switch
408	15/16 amp switch
409	3 pin 5/6 amp socket outlet
410	6 pin 15/16 amp socket outlet
411	Telephone socket outlet
412	TV Antenna socket outlet
413	Bell push
414	2 pin socket outlet 5 Amp.
415	Suplying and fixing following modular switch/ socket on the existing modular plate & switch box inculding connection but excluding modular plate etc. as required.
416	5/6 amps switch
417	2 way 5/6 amps switch
418	15/16 amp switch
419	3 pin 5/6 amp socket outlet
420	6 pin 15/16 socket outlet
421	Telephone socket outlet
422	TV Antenna socket outlet
423	Bell push
424	2 pin socket outlet 5 Amp.
425	Rewinding of the following fans using enameled copper wire of required gauage, varnishing oiling greasing etc. The workmanship shall up to the satisfaction of the Engineer in charge.
426	900mm /1200mm / 1400mm sweep AC ceiling fan
427	300mm sweep exchaust fan
428	Servicing of the Geyser etc. as required.
429	Supplying and replacement of the suitable size and rating of the following in the storage water heater and making the geyser in good working condition. (Make as per the gyser installed)
430	Heating Element
431	Thermostat with control
432	Replacement of Assembly complete job
433	Repairing of Geyser by Replacing
434	Single pole upto 32 amp.
435	Single pole and neutral upto 32 amp.
436	Double pole upto 32 amp.
437	Double pole 32 amp. (Modular)
438	Triple Pole and netural upto 32 amp.
439	SPN 40 Amp
440	SPN 63 Amp
441	TPN 40 Amp
442	TPN 63 Amp
443	Providing and fixing of PCB in wall fans (Remote control type) having sweep 400 mm of make Havells/ CG.
444	Supplying and fixing of twin core aluminium cable all along the wall surface unarmoured.
445	6 sq. mm
446	10 sq. mm
447	16 sq.mm
448	25 sq.mm
449	35 sq.mm
450	Labour charge for electrician
451	Labour charge for Helper electrician
452	Supplying & Drawing of Co- axial TV cable RG-6 grade, 0.7 mm solid copper conductor.
453	Supply, Drawing and Testing of 4 pair, 23 AWG Solid Bare Copper wire insulated with PVC, UTP (Unshielded Twisted Pair), Category 6, Class E, 100 Ohm Impedance, Indoor Cable as per latest ammendments of ANSI/TIA/EIA-568 , The copper conductors should be balanced twisted in pairs, seperated by a cross-member fluted pair divider & protected by PVC Jacket. Certified performance in a 4-connector configuration upto 100 Mtrs channel requirements & transmission frequencies up to 250 Mhz. in existing MS/PVC Conduits/casing capping including making connections to Information outlets and Patch Panels with jack & ferruling at both ends for identification with necessary tools for punching, stripping, crimping and testing etc as required complete in all respect. All as pre approved by Engineer in charge.
454	Supplying of Remote Bells
455	Supplying & fixing of following PVC Gang Box.
456	One way
457	Two way
458	1 + 1 way
459	3 + 1 way
460	4 + 1 way
461	6 + 1 way
462	1 + 1 way (Power)
463	Supplying & fixing of Electrical Accessories PVC Casing and Caping (Batten).
464	Casing Caping 1\\"
465	Casing Caping 3/4\\"
466	Deep Box
467	Fan Box
468	Conceeled Box
469	Junction Box (Metal)
470	Supplying and fixing of Phenolic Laminated Sheet 9\\" x 11\\" including cutting the space for switches/socket etc.
471	Supplying and fixing of Phenolic Laminated Sheet 9\\" x 6\\" including cutting the space for switches/socket etc.
472	Supplying and fixing of Phenolic Laminated Sheet 4\\" x 4\\" including cutting the space for switches/socket etc.
473	Supplying and fixing of Phenolic Laminated Sheet 11\\" x 13\\" including cutting the space for switches/socket etc.
474	Supply and fixing of single phase of following rating self priming for pumping water including connections etc as required. (Copper winding)
475	0.5 HP
476	Rewinding of 1 phase (0.5 HP) motor for water lifting (Copper winding)
477	Rewinding of 1 phase (1 HP) motor for water lifting (Copper winding)
478	Supply & installation of following type inverters
479	Invertor 1050 VA
480	Invertor 2000 VA
481	Supplying & fixing of Battery 12 Volt. Tubular 150 AH with 36 months Guarantee Note.:- (Rs.1800 /Battery has to be deduct for the scrap of old batteries from allotted rate in case of replacement of battery is out of warranty period.
482	Supplying of distilled water for Batteries
483	Supplying & fixing of PVC Trolley for housing single battery inverter
484	Supplying & fixing of PVC Trolley for housing double battery inverter
485	Repair to PCB of inverter
486	850 VA to 1050 VA
487	1650 VA to 2000 VA
488	Replacement of PCB of inverter
489	850 VA to 1050 VA
490	1650 VA to 2000 VA
491	Supplying, installation, testing and commissioning of 1 KVA offline UPS with minimum backup of 20 minutes and having over load, short circuit protection.
492	Supplying, fixing & commissioning of Storage Water Heater (Geyser) of following capacity along with PVC Pipes etc as required.
493	5/6 Ltr (instant)
494	15 Ltr
495	25 Ltr
496	35 Ltr
497	50 Ltr
498	Supply of Halogen Electrical heaters (3 Rods)
499	Supply of Heating Convector (Blower)
500	Supply of Pillar Heater

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents

Also Visit

Tenders

Jammu And Kashmir Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Urgent Repair/Renovation And Addition/Alteration Of Various Pwd( R&B ) Buildings Falling Under The Jurisdiction Of Pwd (R&B) Division Thathri During The Financial Year 2026-27., Thathri-Jammu And Kashmir

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Urgent Repair/Renovation And Addition/Alteration Of Various Pwd( R&B ) Buildings Falling Under The Jurisdiction Of Pwd (R&B) Division Thathri During The Financial Year 2026-27., Thathri-Jammu And Kashmir

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us