|
| 1 | Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below.(ii) Amount of Schedule of credit shall be deducted offline |
| 2 | Supply and fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) with 12mm semi perforated micro tegular edges GRG false ceiling tiles of Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC 0.50 to 0.75 as per IS 8225:1987, Non combustible as per BS 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main - T runners of size 15 x 32 mm of length 3000mm, cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000 mm length and L shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws including taking down old false ceiling any type and pattern complete all as specified and directed. |
| 3 | S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick (precoated AZ 150 micron) of approved colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws and bitumen washer including dismantling of old sheets fixed at any location complete all as specified and directed |
| 4 | All items as per Item No. 2.00 above but plain sheet as in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) including dismantling of old sheets fixed at any location complete all as specified and directed |
| 5 | M&L for light shade vitrified ceramic tiles 9-10 mm thick, premium quality, coloured (of approved shade and design) area of each tiles not exceeding 0.36sqm, joint free, as in floors and skirtng, etc. set and jointed in neat cement slurry and joints grouted with pigment to match with shade, laid over and including 15mm thick screed bed in CM (1:6) including dismantling of old tiling fixed in any mortar and position complete all as specified and as directed. |
| 6 | M&L for non-skid coloured ceramic tiles 7 to 8mm thick (area of each tiles exceeding 0.11sqm but not exceeding 0.18 sqm) in floors and skirting set and jointed in neat cement slurry over screed bed 15mm in CM (1:6) and pointed in white or coloured cement to match with shade of tiles including dismantling of old tiling fixed in any mortar and position complete all as specified and directed. |
| 7 | M&L glazed ceramic colour tiles with suitable matching highlighter in vertical surfaces of size not less than 450x30x 7-8mm thick set and jointed in neat cement slurry fixed over and incl 10mm thick rendering in CM (1:4) as in backing coat and pointed in white or colour cement to match the shade of tiles including dismantling of old tiling fixed in any mortar and position complete all as specified and directed. |
| 8 | M&L for 25mm thick in PCC 1:2:4 type B0 using (using 12.5mm stone aggregate) as in bedding layer for laying in floor as in levelling course complete all as specified and directed. |
| 9 | M&L green marble (approved pattern and texture) work 15 to 18mm thick (table rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms and like in laid over 20mm cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble and rounding of edges all around from inside and outside complete all as specified and directed. |
| 10 | M&L granite 18-20 mm thick (of approved colour and texture) (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade or granite including dismantling of old stone slab complete all as specified and directed. |
| 11 | M&L for cement concrete type D2 (1:4:8) (using 40mm graded stone aggregate in foundations and mass concrete etc including dismantling of old PCC complete all as specified and directed. |
| 12 | M&L 75mm thick, cement concrete (1:3:6) type C-1 using (using 20mm graded stone aggregate) as in plinth protection/path etc finished fair and even laid in bays n.exc 2m in length and cutting of dummy joints 65mm deep x 10mm wide @ 3m intervals and at corners filled with bitumen mastic 1:3 complete all as specified and directed |
| 13 | M&L for 10 mm thick rendering in cement mortar 1:6 on other than fair face of brick/ concrete surfaces finished even and smooth without using extra cement including taking down old plaster and raking out joints complete all as specified and directed. |
| 14 | M&L for rendering 15 mm thick cement plaster in two layers (10mm in cement mortat 1:6 as backing coat and 5mm in cement mortar 1:4 finish coat with WPC) on fair faces of bricks or concrete surface finished even and smooth without using extra cement including taking down old plaster and raking out joints all as specified and directed. Note:- WPC shall be measured and paid seperately. |
| 15 | Supply only Integral water proofing compound complete all as specified and directed. |
| 16 | M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of white cement based putty of 1 mm thick complete all as specified and directed. |
| 17 | M&L complete removal of old decorated surface of wall and applying two coat of oil emulsion distemper white/coloured over one coat of white cement based putty all as specified and directed by Engr-in-Charge. |
| 18 | M&L for preparation of newly plastered or unplastered surfaces in walls soffits, facia, chajjas and applying two coat of exterior weather proof water based emulsion over a coat of compatible primer complete all as specified and directed. |
| 19 | M&L for preparation of old plastered or unplastered surfaces in walls soffits, facia, chajjas and applying two coat of exterior weather proof water based emulsion complete all as specified and directed. |
| 20 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sq. m each complete all as specified and as directed. |
| 21 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sq. m but not exc 4 sq. m each complete all as specified and as directed. |
| 22 | S&F 125x60 mm pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate, etc. complete as specified made out of 1.25mm thick ms sheet complete all as specified and directed |
| 23 | M&L for cement concrete type B0 1:2:4 using 12.5mm graded stone aggregate as in filling of door frame of pressed Steel and bed blocks and like etc complete all as specifed and directed |
| 24 | S&F solid PVC door frame (approved color) of size 50mmx47mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, fixing in opening as per specification and drawing complete all as specified and directed. |
| 25 | S&F factory made solid panel PVC door shutter (approved color and pattern) 30mm thick (stiles) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap inserted for top rail and bottom rail. Penelling of plain colour PVC sheet to be fitted to the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing in the frame at site complete all as specified and directed. |
| 26 | S&F 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed |
| 27 | S&F 35mm thick second class hard wood factory made glazed and Skelton door shutter open rebated and prepared to receive glass or gauge etc divided into square with plain chamfered or rounded, mitred and rebated sash bars any number complete all as specified and as directed. Note: - Size of member of shutters as specified in SSR Part-I 1991 section 8 clause 8.24 (a) complete all as specified and directed |
| 28 | S&F 140mm, double body floor door stopper of aluminium alloy body and tongue, anodised fixed in door shutters complete all as specified and directed. |
| 29 | S&F for 150 mm aluminium handles, cast type, anodised complete all as specified and directed. |
| 30 | S&F for ISI marked 150mm long aluminium, anodized, barrel tower bolts of extruded section complete all as specified and directed. |
| 31 | S&F 300mm long, aluminium alloy anodised sliding door bolts with hasp and staple (bolt type) & fixing clip of sheet cast or extruded section & fixing bolt & sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed. |
| 32 | S&F for 100mm stainless steel butt hinges heavy grade complete all as specified and directed. |
| 33 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 34 | S&F mild steel, 250 mm, ordinary rat tail rod pattern springs including roller and roller plate fixed to steel frame by welding complete complete all as specified and directed. |
| 35 | M&L for preparation of newly wooden surfaces with two coats of synthetic enamel paint over coat of pink primer of any description not otherwise described over 10 cm width or girth including preparation of surfaces complete all as specified and directed. |
| 36 | M&L for prepration of new steel surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer all as specified and directed. |
| 37 | M & L for preparation of old painted steel surfaces of any description, not otherwise described over 10 cm width or girth and applying Two coat of synthetic enamel paint complete all as specified & directed. |
| 38 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 39 | Dismantling unframed timber scantlings as fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section, fixed in any position complete all as specified and directed. |
| 40 | S&F for steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS-1161-1979 Grade St-240 including dismantling of old structural steel all as specified and directed. |
| 41 | S&F of framed work such as grills, gratings, cooler stands etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165 incl necessary fixing to openings all as specified and directed. |
| 42 | S&F in repair powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) frame and shutters with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, suitable aluminum handle, handle lock/ mortice lock for door shutter etc all complete as per architectural drawings complete all as specified and directed. |
| 43 | S&F sheet glass 4.0 mm thick n exc 0.5 sqm in each pane fixed in aluminium or wooden windows complete all as specified and directed. |
| 44 | S&F 4.0 mm thick figured glass, pin headed type and glazed oil putty in square not 0.50 sqm in each pane complete all as specified and directed. |
| 45 | S&F 25mm dia stainless steel curtain rod premium quality including taking down old rod with fittings complete all as specified and directed. |
| 46 | S&F decorative type SS curtain rod bracket with cap of suitable for 25mm dia rod complete all as specified and directed. |
| 47 | S&F rotational moulded polyethylene water storage tank 1000 ltrs cap cylinderical vertical with closed top hoisted and fixed in position at roof or stand all as specified in SSR Pt-I including dismantling of old water tank complete all as specified and directed. |
| 48 | S&F 20mm ball (float) valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron/PVC/CPVC pipe in water tank and fixed. (Minimum weight 25mm-455gms) complete all as specified and directed. |
| 49 | S&F of GI tubing dia 15 mm dia 'medium weight' and all fittings on walls / ceilings or laying in floors including taking down old water tubing fixed in any positions complete all as specified and directed. |
| 50 | Cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed. |
| 51 | S&F of GI tubing dia 20 mm dia 'medium weight' and all fittings on walls / ceilings or Laying in floors incl taking down old water tubing fixed in any positions complete all as specified. |
| 52 | S&F 20mm bore gun metal, globe or gate valve with iron wheel head, screwed both ends for iron pipes and fixed complete all as specified and directed. |
| 53 | S & F in repairs vitreous china squatting pan, `Orissa` pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) with PVC SWR P or S trap complete all as specified and as directed. |
| 54 | S&F in repair vitreous china wash down water closet pan (pedestal pattern), white and trap including seat cover, fixing bolt, flush pipe, connection to drain (or out going pipe) and to flushing pipe, anti syphonage pipe, etc complete all as specified & as directed. |
| 55 | S&F in repairs urinal bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) but incl PTMT spreader and PTMT waste coupling 32mm & waste pipe, PVC Connection pipe 450mm for flushing complete all as specified and directed. |
| 56 | S&F in repair wash hand basin counter top having size 440 x 440 x 135mm or 420 x 345 x 170 mm rectangular/ oval shape of approved make including waste coupling and waste pipe complete all as specified and directed. |
| 57 | S&F for 600x450mm plain edge mirror 5mm thick of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 58 | S&F in repair 15mm bore dia chromium plated stop valve/angle cock, but fancy type, chromium plated with long shank and cup (concealed type) and fixed complete all as specified and directed |
| 59 | S & F in repair 15mm bore, fancy type, long body bib tap of cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. |
| 60 | S&F in repair CP long body two way bib tap 15mm dia complete all as specified and directed. |
| 61 | S&F in repair 15 mm tall body pillar taps, cast copper alloy, chromium plated with capstan heads, chromium plated, screwed down high pressure, with or without letter hot or cold with long screwed shanks and fly nuts, screwed for iron pipe and fixing complete all as specified and directed. |
| 62 | S&F in repairs for 10 ltrs capacity PVC Valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets flushing cistern, PVC flushing pipe of suitable length and PVC connection 450mm long complete all as specified and as directed. |
| 63 | S&F in repair CP health faucet( ABS Body) suitable for 15mm dia pipe with 1.25m long flexible steel tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed. |
| 64 | S&F PVC connection 15mm dia of length not less than 600mm with both ends, brass fly nut for water supply complete all as specified and as directed. |
| 65 | S&F in repairs brass chromium plated shower rose 150mm dia or width with or without swivel joints, including fixing to steel pipe or union complete all as specified and as directed. |
| 66 | S&F for soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed. |
| 67 | S & F brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed. |
| 68 | Taking down of PVC rainwater pipes and waste water pipe or gas pipe (any size or pattern) in any position, including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to store complete all as specified and as directed. |
| 69 | S & F 110mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to wall with PVC clamps complete all as specified and as directed. |
| 70 | S & F 75mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. |
| 71 | S & F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall with clamps complete all as specified and as directed. |
| 72 | S & F 110mm bore PVC (SWR) bends of any radius with access door jointing with solvent cement complete all as specified and as directed. |
| 73 | S & F 75mm bore PVC (SWR) bends of any radius with access door jointing with solvent cement complete all as specified and as directed. |
| 74 | S & F for 75 mm bore PVC (SWR) junction (single T) with access door equal or unequal jointing with solvent cement complete all as specified and as directed. |
| 75 | S & F for 110mm bore PVC (SWR) junction( Single T) with access door equal or unequal jointing with solvent cement complete all as specified and as directed. |
| 76 | S & F 110/75mm bore PVC (SWR) vent cowl, jointing with solvent cement complete all as specified and as directed. |
| 77 | M&L for 75mm bore PVC (SWR) floor trap/ multi trap, plain with grating including jointing with solvent cement complete all as specified and as directed. |
| 78 | M&L for brickwork with Fly ash Bricks, in straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and as directed. |
| 79 | M&L precast RCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in cover slab set in CM 1:6 incl demolition of old cover slab all as specified. Note-Reinforcement steel will be measured and paid separately. |
| 80 | M&L TMT reinforcement bars 10mm and over using cut to length bent to shape as required including cranking bending spirally for hooking ends and binding with and including mild steel wire (annealed not less than 0.9mm dia or securig with clips etc complete all as specified and as directed. |
| 81 | S&F Providing and laying 60mm thick rubber moulded factory made chamfered edge cement concrete glossy finish paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer and filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed |
| 82 | Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface hard or dence soil complete all as specified and as directed. |
| 83 | S&F for posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed. |
| 84 | S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, each screwed end to be fitted with washers and one hexagonal or square nut, n. exc 5 cm long.(Diameter of neck in 11 to 15 mm complete all as specified and as directed. |
| 85 | Supply only of chain link fencing of any mesh size and wire thickness etc complete all as specified and as directed. |
| 86 | Fixing only of chain link fencing of any mesh size and wire thickness including line wires and binding wire etc complete all as specified and as directed. |
| 87 | M&L plain round bars 5 mm dia over and upto including 10mm bar for fixing in fencing mesh including cut to length, bent to shape and welding as required or securig with clips etc complete all as specified and as directed. |
| 88 | Taking down carefully copper/aluminium point wiring concealed/ casing caping (light, fan, socket or power) including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings, call bell and removing materials to take in store for keeping in safe custody or for taking schedule of credit and making good disturbed surfaces of walls, floors, etc all as specified and directed. |
| 89 | Dismantling/taking down of unserviceable old existing service /submain wire of any size all as specified and directed. |
| 90 | Dismantling/taking down of unserviceable distribution boards with MCBs, all as specified and directed. |
| 91 | Taking down/dismantling of storage type hot water Geyser of 50/35/25 litre capacity from different locations by disconnecting inlet/outlet connections and deposited to E/M office store yard complete all as specified & directed |
| 92 | Taking down carefully serviceable/unserviceable exhaust fans of any size from its position, and deposited to E/M office store yard all as specified and directed. |
| 93 | Taking down carefully ceiling fans of any size from its position, and deposited to E/M office store yard all as specified and directed. |
| 94 | Taking down and refixing of LED tube light fitting bright 18/20 Watt. slim elegant design and including connected with 3 core 23/0.0076 insulated copper wire from celing rose to fittting connector complete all as specified and directed. |
| 95 | M&L for concealed point wiring for one light or one fan or one exhaust fan controlled by one switch complete with and includidng single core PVC insulated unsheathed flexible conductor FRLSH cables of 1.5 sqmm dia as per IS 694:2010 ISI marked annealed multistranded copper conductor drawn through and including medium machenical strees PVC conduit as per IS 9537 (Part-III): 1983 of suitable nominal size as required at site dia but not less than 20mm noninal size including modular / non modular type all accessories/fitting / metal flush box / cover plate/junctiion boxes/ inspection cover etc ISI marked and sunk terminal boxes flush galvanised metal boxes suitable for fixing with 1.5 sqmm copper conductor PVC insulated, unsheathed flexible multistaranded copper conductor FRLSH cable as continious earth wire connected to metalic body at one end and common earth dolly to other end including cost of cutting chase and making good to distrubed surfaces of wall with cement mortor 1: 3 including necessary plaster and pointing in cement mortor 1:3 with white wash / distemper/ other painting complete all as specifiecd and as directed Note- Cost of cutting chase and making good shall be included in the quated rates. |
| 96 | All as per ser item No. 94.00 here-in-before but for one switch socket combination 5/6 amp on independent board complete all as specified and directed. |
| 97 | All as per ser item No. 94.00 here-in-before but for one three pin socket outlet 5 Amp on same board with other switches complete all as specified and directed. |
| 98 | All as per ser item No. 94.00 here-in-before but for one switch socket combination 6 pin 5/ 15 Amps on independent board with wire of size 2.5 Sqmm and 2.5 Sqmm as earth wire.complete all as specified and directed. |
| 99 | All as per ser item No. 94.00 here-in-before but for one switch socket combination 6 pin 5/ 15 Amps on independent board with wire of size 4.0 Sqmm and 4.0 Sqmm as earth wire.complete all as specified and directed. |
| 100 | S&F switch piano flush type 5/6 Amps single pole one way all as specified & directed. |
| 101 | S & F socket out let 5 pin 5/6 Amps single pole 230 volt all as specified and directed. |
| 102 | S&F in switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal all as specified and directed. |
| 103 | S&F in replacement ceiling rose 2/3 terminals 65x25 mm dia poly carbonate isolated all as specified & directed. |
| 104 | S & F in replacement stepped type electronic fan regulator single / double module flush type on the existing phenolic laminated sheet etc. as reqd. complete all as specified and directed. |
| 105 | S & F in replacement lamp holder insulated PVC/Polycarbonate body with back plate for conduit /batten fittings complete all as specified and directed. |
| 106 | Supply & fixing in replacement LED tube light complete fitting 40 watt 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose comlete all as specified and directed. |
| 107 | S&F in replacement LED lamp 10 Watt B22 CDL complete all as specified and directed. |
| 108 | Supply and fixing in replacement factory made epoxy powder coated distribution board TPN, 4 ways ( VTPN MCCB DB ) and space for MCCB as incomer with metal door ( IP-43 protection ) fabricated from CRCA sheet and fixed semi flush to wall and suitable for universal mounting and including isolated Neutral Bar, Insulated busbar assembly, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts complete all as specified and directed.NOTE:- MCCB shall be measured and paid seperatly. |
| 109 | S&F in replacement MCCB 125 Amp, 3 Pole, breaking capacity 36 KA with complete electrical connections by appropriate size of copper lugs complete all as specified and directed. |
| 110 | S&F in replacement sheet metal enclosure, double door type surface mounted concealed in wall 8 ways, 240 Volts, ISI marked 200 amps bus bar dust and vermin proof suitable for incorporation MCBs and isolators etc complete all as specified and directed. |
| 111 | S&F in replacement MCB SP suitable for 240 volts, AC supply 6 to 32 Amps with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed. |
| 112 | S&F in replacement MCB SPN suitable for 240 volts, AC supply 40 to 63 Amps, with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed. |
| 113 | M&L in replacement for sub main wiring with two runs of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable of size 6.0 sqmm drawn in and including rigid PVC rigid conduit, medium grade of suitable size but not less than 20mm dia with its accessories, including one run of single core FRLS PVC insulated, unsheathed, stranded copper conductor cable of size 6 sqmm as earth continuity and cutting chases to wall as per standard engineering practice & making good the disturbed surfaces as per existing complete all as specified & directed.Notes:- Two runs of 6.0 sqmm cable and one run of 6 sqmm cable alongwith PVC conduit including its accessories shall be measured one unit length. |
| 114 | S&F in replacement building security light fitting complete with 36 watt LED type pressure die-cast aluminium housing and heat resistant toughened glass with frame protection and better optics for uniform distribution complete fixed bracket made out of GI pipe 32 mm dia (light grade) 1.5 metre long and MS clamp and nut bolts washers and connected with twin core cable 1.5 sqmm from ceiling rose to fittings connector all as specified and directed |
| 115 | M&L in replacement of earthing complete with galvanised steel earth plate electrode size 600X600X6mm thick burried directly in ground vertically to a depth not less than 2.25m deep below normal ground level with top edge of earth plate not less than 1.5m deep below normal ground level and connected to and including GI earth lead wire 4mm dia by means of bolts, nuts, check nuts & washers of galvanised iron and connected to test point all as shown in electrical plate No 3 of SSR part I-2009 and all as specified or indicated and testing on completion including excavation and earth work in any type of strata available at site, PCC (1:3:6) type C-1 using 20 mm gradded stone aggregate, earthing chamber, pre cast RCC slab 50 mm thick in cement concrete (1:2:4) type B-1 using 20 mm graded crushed stone aggregate reinforced with welded steel wire fabric (XPM) weight not less than 4 kg/sqm funnel with GI watering pipe of 20 mm bore medium grade, wire mesh and lugs, GI protection pipe of 15 mm bore light grade up to 7.5 metre long all as specified and directed. NOTE :- GI earth wire and protection pipe beyond 7.5 metre will be measured and paid separately. |
| 116 | Supply and fix in replacement sheet metal enclosures with socket plug top and MCB's with two pin and earth plug and socket complete with one single pole MCB 240 V grade 20 Amp rated, 240 volt complete all as specified and directed . |
| 117 | Supply and fix in replacement heavy duty exhaust fan, steel body AC single phase, 230V of size 380mm sweep with, including cutting of hole in existing wall and resurfacing of disturbed area of wall with blades, and frame and louvers complete, all as specified and directed. |
| 118 | Supply and fix heavy duty exhaust fan, steel body AC, single phase, 230V of size 300 mm sweep with, blades, and frame and louvers including cutting of hole in existing wall and resurfacing of disturbed area of wall complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 119 | Supply and fix heavy duty exhaust fan, steel body AC, single phase, 230V of size 300 mm sweep with, blades, and frame and louvers including cutting of hole in existing wall and resurfacing of disturbed area of wall complete all as specified and as directed. Please Enable Macros to View BoQ information |
