|
| 1 | Supplying of BIS Energy Efficiency level-1, 11/0.433 KV 100 KVA , Al. Wd stack type CRGO Core fitted Distribution Transformer fitted with completely self protected (CSP) complete as required. |
| 2 | Supplying of BIS Energy Efficiency level-1, 11/0.433 KV 200 KVA , Al. Wd stack type CRGO Core fitted Distribution Transformer fitted with completely self protected (CSP) complete as required. |
| 3 | PSC Pole 200 Kg WL(8mtr). (Sugarcane-4,residential-3,piggery-27,kewalia dam-20) |
| 4 | ACSR Rabbit Conductor (50 mm2) |
| 5 | 11 KV Pin Insulator 10 KN ,OD 40 mm dia with pin (polymer type)and nut and washer |
| 6 | 11 Kv B&S type Disc insulator (polymer type)70 KN with H/W. |
| 7 | Supply and fixing of 11 KV pin type 3 phase AB switch 400 Amp (polymer type) |
| 8 | Supply and fixing of 11KV Lightening Arrestor (9 KV ,10 KA Class II, Station type)(1Set=3 nos) |
| 9 | Bimettalic clamps for distribution transformer HT side |
| 10 | Bimettalic clamps for distribution transformer LT side |
| 11 | LT Distribution box suitable for suitable for 200 Kva ,Isolator 400A ,incoming MCCB 4 P,400A,50 Ka,outgoing MCCB 3 P 100A. |
| 12 | 11 KV H.G Fuse unit (polymer type) |
| 13 | 11 Kv V Cross Arm(100x50x6mm)(Galvanized) (16 Kgs). |
| 14 | LT Bracket Vertical formation |
| 15 | LT Back clamp (50x6mm) for LT angle (non galvanized)(0.55Kgs each) |
| 16 | 11KV DP Channel (75x 40x 6mm) (Galvanized) (41.3Kgs) |
| 17 | Transformer base Channel (100 X 50 X6mm)(Galvanized)(52.63Kgs) |
| 18 | MS channel for AB Switch (100 x50 x 6mm)Non Galvanized)(28.16Kgs) |
| 19 | Clamp for Top channel 50x6mm flat 8 mtr 200kg PSC Pole(Galvanized)(2.8kgs) |
| 20 | Clamp for AB Switch base channel (50x6mm )8 mtr 200kg PSC Pole(Galvanized) |
| 21 | Clamp (50x6mm) for Transformer base channel (galvanized) |
| 22 | MS Angle for LT distribution bus (50x50x 6mm)(Non galvanized) |
| 23 | Supplying, fitting and fixing of L.T XLPE AB Cable 3Cx50+35sq.mm for overhead LT line complete job as per direction of E/I . ( for kewalia side) |
| 24 | Suspension clamp suitable for 70-95 Sq.mm Bare messenger (Including 1 No Suspension clamp with Bracket +2 Mtr SS Strap+ 2Nos SS buckle. |
| 25 | Dead end clamp suitable above 70 sq.mm Bare messenger (Including 1 No Dead End Bracket + 1 No Dead End +2 Mtr SS Strap + 2 Nos. ss buckle) |
| 26 | Stainless steel strip strip of 20mm X1mmX1000mm with buckle clip. |
| 27 | Aluminium binding wire |
| 28 | Supplying and errection of stay set complete (galvanized) with 19/20 mm dia X 1.8 meters long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm, thimble stay clamps, bow tightner, 7/4.00 mm dia G.I stay wire and strain insulator in cement concrete 1:3:6 foundation including excavation and refilling as required. |
| 29 | Supplying and erection of 75 mm X 90 mm shackle insulator with G. I. Bolt, nuts and straps etc. as required. |
| 30 | Providing and fixing following TP&N disconnector fuse switch unit in the existing metal board with ISI marked HRC fuses including drilling holes in metal board ,making connection etc as required. 100 Amp ,TP&N ,HRC |
| 31 | Supplying and fixing following way single pole and neutral ,sheet steel, MCB distribution board ,240 volt on surface/recess complete with tinned copper bus bar etc as required.(without MCB /RCCB/ISOLATOR) 4 way, single door |
| 32 | Supplying and fixing 6 amps to 32 amps rating 240 volts ,10 KA C curve miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connection ,testing and commissioning etc as required. 50/63 amps,TPN |
| 33 | FR PVC insulated 3 core 4 sq.mm copper wire (for temporary arrangement in field ) |
| 34 | Earthing with copper earth plate 600mmx 600 mm x 3mm thick including accessories and providing masonary enclosure with copper plate having locking arrangement and watering pipe etc(with charcoal and salt)as required. |
| 35 | Providing and fixing 4.00 mm dia copper wire on surface/ recess for loop earthing as required. |
| 36 | Supplying following sizes and core PVC/XLPE insulated PVC sheated ,heavy duty , electric cable with for working voltage upto and including 1100 volt. Make –Havells/ Polycab or equivalent. 50 sq.mm,3.5 core (nr T/F) |
| 37 | Supplying following sizes and core PVC/XLPE insulated PVC sheated ,heavy duty , electric cable with for working voltage upto and including 1100 volt. Make –Havells/ Polycab or equivalent. 70 sq.mm,3.5 core (for lt of Prod Plant) |
| 38 | Laying of one number PVC insulated and PVC sheated /XLPE power cable of 1.1 KV grade of size exceeding 95 sq.mm but not exceeding 185 sq.mm direct in ground including excavation ,sand cushioning ,protective covering and refilling the trench etc as required. |
| 39 | Errection of RCC/pcc pole of following length in brick ballast and ramming the foundation ,finishing with 150mm thick cement concrete (1:3:6)layers on top with including excavation and refilling etc as required |
| 40 | SITC of following rating LED FLOOD lighting luminarie with pressure die cast housing and toughned glass cover (ip 66 protection) in existing pole/pipe for supply voltage 100-270 V AC ,50Hz 90/100 W LED FLOOD LIGHT |
| 41 | 150/160 W LED FLOOD LIGHT(for high mast) |
| 42 | Hydra/ transportation charges for lifting of transformer. |
| 43 | Overhead & C.P @ 14.95%(Sl. No. 01 to 27) |
| 44 | Add GST @ 18% |
| 45 | Add LWf @ 1 % Please Enable Macros to View BoQ information |
