Tender For Construction Of Model Mandi At Mahura, Sakhigopal, Puri, Puri-Odisha

TDR : 55321307

Tender Notice
BOQ

1 Days Left

Puri , Odisha

Tender Brief : Tender For Construction Of Model Mandi At Mahura, Sakhigopal, Puri

Document Fees
₹ 11800 /-

EMD
₹ 509430.0 /-

Tender Value
₹ 5.09 Crore /-

Submission Date
21-05-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	CIVIL WORK
2	Earthwork in excavation in hard soil or gravelly soil for site leveling, foundation, pits, trenches and other civil works upto and including 1.5metre lift and stacking the soil upto a lead of 100 metre and including dewatering, removing slush, shoring and strutting (as required), complete as per specification and as directed by the Engineer-In-Charge.
3	Filling in foundation trenches and plinth, with excavated earth including laying the earth in layers not exceeding 23.5 cm thick ramming & watering with all leads & lifts including cost of all labour,T&P completed as directed by the Engineer-in-charge.
4	Disposal of unserviceable, dismantled or waste materials like soil, earth by mechanical means within 5km Lead away from the site, including loading, transporting, unloading to approved dumping ground or as approved /directed by Engineer-in-charge, including cost of equipments/ labour, conveyance, T&P and taxes etc. as per the direction of Engineer-in-charge.
5	Supplying and filling in foundation and plinth with good quality river sand including watering, ramming with cost, conveyances, royalties of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer-in-charge
6	Cement concrete of proportion (1:3:6) in foundation and floors using 4cm size clean hard black crusher broken granite stone metal of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15 cm. (6\\") thick to the required level ramming, watering, curing etc. complete including cost, conveyance, royalties of all materials with all labour and T&P required for the work etc. complete in all respect and as per the direction of the Engineer-in-charge.
7	Plain cement concrete (1:2:4) using 12mm size black hard crusher broken granite chips of approved quality from approved quarry including hoisting, lowering and laying concrete in layers, watering, curing etc. complete including cost, conveyance, royalties of all materials with labour,labour cess and T&P etc. required for the work complete as per the direction of the Engineer-in-charge.
8	Providing & applying of pre constructional anti-termite treatment by drilling 12mm dia holes at distance of 30cm @ junction of wall & floor about 300mm apart deep enough to reach the soil below & chemical emulsion (IMIDACHLOPRIED 30.5SC mixed with 47.5ltr water) pumped these holes to soak the soil @ 1 ltr solution of each hole as per manufactures specification & the holes should be pluged the filling materials including cost of all materials, labour,conveyance, T&P , all taxes and hire charges of machinaries as per direction of Engineer-in-charge.(make-premise-BAYER,Paxton-FMC,ozie-KALYANI)
9	Fly Ash. brick masonry of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per Sqr. Cm. in cement mortar of mix (1:6) with approved grade cement and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in foundation & plinth including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-charge
10	First class Fly ash Brick masonry using bricks of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Super Structure including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-Charge.
11	Ground Floor
12	1st Floor
13	2nd Floor
14	Terrace Floor
15	Providing, lifting, hoisting and laying Reinforced cement concrete of M-25 grade as per approved designs and drawings having a minimum compressive strength (in work test) 250 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position.
16	Footing
17	Plinth Beam
18	Column Upto Plinth
19	Column from plinth to 1st Floor slab top
20	Column 1st Floor
21	Column 2nd Floor
22	Column Terrace Floor
23	Lintel and Sill Ground Floor
24	Lintel and Sill 1st Floor
25	Lintel and Sill 2nd Floor
26	Lintel and Sill Terrace Floor
27	Roof Beam Ground Floor
28	Roof Beam 1st Floor
29	Roof Beam 2nd Floor
30	Roof Beam Terrace Floor
31	Ground Floor roof Slab
32	1st Floor Slab roof Slab
33	2nd Floor Slab roof Slab
34	Terrace Sla roof Slab
35	Stair Case Ground Floor
36	Stair Case 1st Floor
37	Stair Case 2nd Floor
38	Stair Case Terrace
39	Cutting, straightening coiled or bent up M.S. Rod or tor steel of SAIL/ TATA / RINL (VIZAG) make including bending, binding, welding and joining if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances, taxes of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors (Linear measurement will be taken and quantity will be calculated basing on the standard weight of B.I.S. for M.S. Rods or tor steel only. Wastage if any, including weight of binding wire will not be considered for measurement) etc. complete as per specification & direction of Engineer-in-charge.
40	Footing to First floor
41	First floor
42	Second floor
43	Terrace floor
44	Providing 12 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge. (Outside Plaster)
45	Ground Floor
46	1st Floor
47	2nd Floor
48	Terrace Floor
49	Providing 16 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge. (inner plaster)
50	Ground Floor
51	1st Floor
52	2nd Floor
53	Terrace Floor
54	6 mm cement plaster on RCC surfaces at ceiling/slab soffit and other locations with cement mortar of mix 1:4 (1 cement : 4 coarse sand) including closed deep chiping and slurry treatment necessary scaffolding, curing etc. all complete at all floors and all heights.
55	Ground Floor
56	1st Floor
57	2nd Floor
58	Terrace Floor
59	Priming one coat with wall cement primer (water bound) to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, taxes of all materials, cost of all labour,labour cess T&P etc. complete as per the direction of the Engineer-in-charge.
60	Ground Floor
61	1st Floor
62	2nd Floor
63	Terrace Floor
64	Providing and fixing modified clay material MCM CusStone-1200 x 600mm, thickness 2.5mm to 3mm PHOMI make, as per company Standard dimension, pattern, colour as specified, manufactured through infired patened.(outer surface)
65	Providing and applying to outside walls with two or more coats of Anti-Fungal Weather coat water proofing paint including scaffolding and cleaning the surface before application of approved colour and manufacture as per specification, instruction of Engineer-In-Charge at all elevations including all material labour complete. (External Surface)
66	Ground Floor
67	1st Floor
68	Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer, over the plastered wall surfaces to prepare the surface even and smooth as per the instruction of Engineer-In-Charge at all elevations including all material & labour complete. (Internal Surface)
69	Ground Floor
70	1st Floor
71	2nd Floor
72	Terrace Floor
73	Providing & painting Two coats of Plastic emulsion paint with 1st quality of approved brand and manufacturer to give an even shade as per the instruction of Engineer-In-Charge at all elevations including all material & labour complete. (Internal Surface)
74	Ground Floor
75	1st Floor
76	2nd Floor
77	Terrace Floor
78	Providing Vitrified tile flooring using vitrified tiles having thickness of min 10mm conforming to IS 13755 of 600x600 (homogeneous) of premium quality (JOHNSON / SOMANY/ KAJARIA/ RAK) in floors, treads on steps and landings on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and fixing with neat white cement slurry,grouting the joints with neat white cement slurry mixed with required quantities of pigments of approved make to match the shades of the vitrified tile if required , watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour,Labour cess , sundries, T&P required for the work, complete in all respect as per specification and direction of Engineer-in-charge.
79	Ground Floor
80	1st Floor
81	2nd Floor
82	Providing 30cm x 30cm special plain series ceramic floor tiles of premiumgrade having thickness 7mm to 8mm conforming to IS 13755 (JOHNSON / SOMANY/ KAJARIA/ RAK) in floors, treads on steps and landings on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and fixing with neat white cement slurry,grouting the joints with neat white cement slurry mixed with required quantities of pigments of approved make to match the shades of the vitrified tile if required , watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour,Labour cess , sundries, T&P required for the work, complete in all respect as per specification and direction of Engineer-in-charge.
83	Ground Floor toilet flooring
84	1st Floor toilet flooring
85	2nd Floor toilet flooring
86	Supplying, fitting & fixing of 30cm x 30cm special plain series ceramic wall tiles of premiumgrade having thickness 7mm to 8mm conforming to IS 13755 (JOHNSON / SOMANY/ KAJARIA/ RAK) in dadoes laid on 12 mm thick cement mortar (1:3) (1 cement : 3 course sand) and filling joints with slurry including cost of all materials, labour T&P etc. required for the work all complete incl. rubbing as per direction of the Engineer-in-charge
87	Ground Floor toilet wall
88	1st Floor toilet wall
89	2nd Floor toilet wall
90	Supplying, fitting & fixing of Kota Tiles of minimum 16 mm thick Above 0.10 Sqm on 20mm thick bed of cement mortar (1:4) (1 cement : 4 course sand) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete including cost of all materials, labour T&P etc required for the work all complete as per direction of the Engineer-in-charge.
91	Ground Floor
92	1st Floor
93	2nd Floor
94	Terrace Floor
95	Providing and laying Vitrified skirting tiles 600x600 mm (thickness to be specified by the manufacturer) 1st quality conforming to IS: 13755 of NITCO, SOMANY, ASIAN, KAJARIA or equivalent approved make, colours & shades, except white, ivory, grey, fume red brown, laid on 12 mm thick cement mortar 1:3 (1cement: 4coarse sand ) including pointing the joints with white cement and matching pigments, etc. complete as per direction of EIC at all floors and all heights.
96	Ground Floor
97	1st Floor
98	2nd Floor
99	Supplying, fitting & fixing of Kota Tiles of minimum 16mm thick and above 0.10 sqm of approved make in dadoes laid on 12 mm thick cement mortar (1:3) (1 cement : 3 course sand) and filling joints with slurry including cost of all materials, labour T&P etc. required for the work all complete incl. rubbing as per direction of the Engineer-in-charge
100	Ground Floor
101	1st Floor
102	2nd Floor
103	Terrace Floor
104	Supplying, fitting & fixing of Chequered tiles in floors of approved make laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with slurry including cost of all materials, labour T&P etc required for the work all complete as per direction of the Engineer-in-charge
105	Supplying, fitting and fixing of stainless steel of 304 grade in hand rail using 50mm dia of 2mm thick circular pipe with balustrade of size 32mm x 32mm x 2mm @ 0.90 mt c/c and stainless square pipe bacing of size 32mm x 32mm x 2mm in three rows over rataining wall as per approved design and specification, buffing, polishing etc with cost, conveyance,of all materials, labour T&P etc. required for the complete in all respect as per the direction of Engineer -in- charge.
106	Supplying, fitting & fixing in all floors of M.S. grills, grill gates, M.S. gates, garage door, collapsible gates with top and bottom rails, steel windows, critical frames for windows, stair case and parapet railing made out of M.S Square bar/ flat including stair case hand railing with 40mm. dia G.I.pipe etc. including painting two coats over a coat of redoxide primer as per approved drawing and design with cost of all materials & labour, labour cess, T&P, sundries etc. complete in all respect as per specification & direction of the Engineer-in-Charge.
107	Painting two coat with approved synthetic enamel paint to new iron work over a coat of Red oxide primer including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer in charge.
108	Ground Floor
109	1st Floor
110	2nd Floor
111	Supplying and fixing rolling shutters of approved make, made of 80 x 1.25 mm M.S laths, interlocked together through their entire length and jointed together at the end by end locks, mounted onspecially designed pipe shaft with brackets, side guides and arrangements for inside and ouside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS:4454-part 1 and 1.25mm M.S Top cover for rolling shutters.complete inall respect as per specification & direction of the Engineer-in-Charge
112	Providing and fixing of louvered ventilators of approved make to be fabricated from roll formed sections made of pre-painted steel (base steel as per IS- 513 of 0.6 mm thick “D” quality, galvanized as per IS-277 with zinc of 120 Gm/Sq.mtr) with paint specification being with primer of 5-7 microns and finished paint with polyster paint (Black /Pearl white/ Chocolate Brown) of 12-16 microns alongwith the alkyd backer at the back of 5-7 microns and the sizes of outer frame being of 46x52 mm. Section for internal top and bottom frames in the louvered areas should be 18 x 40 mm. Accessories / gaskets are to be used as per the manufacturer’s supply and specification. All corner brackets are to be made of CRCA with zinc phosphating. The louvered-clips should be of glass filled nylon. The sections are to be cut to length , mitre joined with corner bracket and frames are fixed to the concrete/masonry walls by means of self-expanding screws and glass to be used of 5 mm reflective with all taxes complete.
113	Supplying and fitting of precoated Galvanized iron profile sheet semi gloss of 1000mm width & total coated thickness 0.45mm in roof drilling holes in wind ties including fixing of ridges valleys, wind ties with all cost of J/L Hooks etc. complete as per direction of Engineer-in-Charge.
114	Supplying and fitting -fixing of un-plasticised poly vinyl chloride (UPVC) (FENESTA/NCL VEKA LTD) Threetrack-three panel sliding window-60-series duly manufactured using UPVC reinforced profiles of 108mmx45mmx2.5mm for outer frames & window sash of 39mmx58mmx2.5mm capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5 mm prefabricated & welded through fusion welding the window frame shall be fitted with 6mm thick clear tougherned glass of SAINT-GOBAIN make duly fixed with EPDM weathering seal resistant and the system is to be installed using reinforced large coupler at the site using anchor fasteners, sliicon rubber sealant, easy glazing/ deglazing at site etc. including cost and conveyance of all materials, accessories, labour charges,materials and product conforming to ASTM D 638-14,EN-477-95 and other applicable codes & standards.( Rate Approved from Nirman soudha Ltr no- 20894,Date-26.05.2022)
115	Providing and fixing of 12mm thick clear toughened Glass frameless door with dorma premium fittings Dorma premium (9111198) unilite package BTS 75,UL PT 10 with cover,UL US 10Luck with cover and PT 24,Dorma premium(9137121) H Type handle 450mm, 12mm clear toughened glass with cutout and hole, including the cost of all materials hardware fittings ,cost of all labour,conveyance,loading,unloading,T&P,etc complete as per the direction of engineer-in-charge. ( Approved rate for MPH building Sl no-18)
116	Providing and fixing seasoned sal wood work in frames at any locations including doors, windows, cupboard, clerestory and other frames fixing in position including cost of hinges, M.S. flat (30mm x 6mm) hold fasts lugs or dash fasteners of required dia and length as per drawing / specification, at all floors and all heights.
117	Supplying, fitting and fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality including cost of all door fittings and fixtures etc. complete
118	Supplying all materials,labour, T&P and fitting and fixing of 30 mm PVC door shutter with door frame of 40 mmX45 mm size of approved quality including fixing materials and cost, transportation , taxes etc all complete in all respect as per the direction of engineer in charge
119	Providing and fixing of fixed ventilators of approved make to be fabricated from roll formed sections made of pre-painted steel (base steel as per IS-513 of 0.6mm thick \\"D\\" quality, galvanized as per IS-277 with zinc of 120 Gm/Sq.mtr) with paint specification being with primer of 5-7 microns and finished paint with polyster paint (Black/Pearl white/Chocolate brown) of 12-16 microns alongwith the alkyd backer at the back of 5-7 microns and the sizes of outer frame being of 46x52 mm and with all vertical and horizontal mullions are of 46x70 mm and fixed beadings are of 18x25 mm. Accesories / gaskets are to be used as per the manufacturer's supply and specifiaction like handle being made of high grade aluminium powder coated with nylon reciever and gasket will be made of EPDM. All corner brackets are to be made of CRCA with zinc phosphating. The mullion caps and louvered -clips should be of glass filled nylon. The sections are to be cut to length, mitre joined with corner bracket and frames are fixed to the concrete/masonary walls by means of self expanding screws and glass to be used of 5mm reflective with all taxes complete.
120	Supplying and fixing of GFRC (Glass Fibre Reinforced Concrete) Screen/Jali of approved make of thickness of 50 ± 10 mm pattern,design and colour of approved make to be fixed on / between RCC / Block Work Column or Structural Work with dry fixing method with appropriate framework, using fasteners and necessary hardware etc. in Building Facade. The element shall be made from '53 grade' Portland Cement make Birla/ JK Cement or equivalent, Quartz, fine silica sand, Alkali Resistant Glass Fibre make 'OC' or equivalent, Super plasticisers / Additives make by 'BASF' or equivalent, Polymers make 'BASF' or equivalent and UV Resitant Synthetic Inorganic pigments shall be used for pigmentation make 'BAYFERROC'(Germany) or equivalent. The materials casting shall take place in Synthetic Rubber / FRP Mould Manufactured by Mould / Tool / Mould Grade Resin of Revex / Reckil or equivalent complete including cost, conveaynce of all materials, labours, transporation charges etc. complete in all respect as per specification and direction of the Engineer-in-Charge.
121	CALSIUM SILICATE CEILINGProviding and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’, bottom exposed with 24 mm of all Tsections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer-in-Charge.
122	GRID CEILING MAGNESIUM OXIDE VINYL FLIM SQUARE TILES Supply and Installation of 8 mm thick magnesium oxide square edge magnesia core ceiling tile of size 595 x 595 mm having density 1000 Kgs/ m3, weight 8 kg/m2 which is suspended by using 0.3 mm thick and 24 mm wide precoated metal T 24 grid system. The technical parameters are as follows :Core - Magnesia, Fire – Class 1 & P, Acoustics – STC 44 - 54 , climate - 50 , RH - 95, Termite resistance ,Green (RC %) – 30, Hygiene (VoC, Clean room) – Low, Class 3 , Thermal -0.12 W/mK. The T 24 Grid system of 600 x 600 mm module shall include wall angle (WA 24 W 30) with unequal flanges of size 14 & 20 mm wide, length 3000 mm, 0.43 mm thick fixed along the perimeter of wall with the help of nylon sleeves and suitable fasteners at 300 mm centers. Then suspend the Main T 24(MT 24 W 36) having flange width 24 mm, height 32 mm and length 3600 mm from the soffit with help of soffit cleat and wire rod along with leveling spring clip at 1200 mm c/c. Cross 24(CT 24 W 12) with flange width 24 mm, height 32 mm and length 1200 mm is then interlocked into the precut slots in the Main T 24 at 600 mm centers in the direction perpendicular to the Main T 24. Finally Cross T 24 (CT 24 W 06) having flange width 24 mm, height 32 mm and length 600 mm are then interlocked into the precut slots in the 1200 mm Cross T 24 at 1200 mm centers and in direction parallel to the Main T 24. Magnesium oxide vinyl square edge of size 595 x 595 x 8 mm thick shall be placed into the grid size of 600 x 600 mm. Test certificate will be submitted after procurement of materials.
123	Providing and laying grading conc. 25 mm (avg. thickness) cement concrete of required slope of mix 1:2:2 (1cement:2sand:2 graded stone aggregate of 10 mm nominal size) mixed with approved water proof compound as per manufacturer's specification on top of slab including cement slurry, all complete, including the cost of water proofing admixture, which should be approved by the Engineer-In-Charge prior to material procurement by the contractor.
124	Waterproofing application:- Providing and application of two component polymer modified flexible cementitious waterproofing coating at a thickness of 1.5 -2.5 mm The membrane should have Elongation equal or more than: 30% Crack Bridging ability : Up to 1 mmAdhesive strength: 1.0 N/mm² @ 28dTensile elongation: 60% @ 20°CShore A Hardness >85 (between 3 - 7 days)etc. as per direction of E.I.C (For longer span, in terrace panel of 4m*4m should be done by groove cutting, and filling with PU Sealant)(Make-Myk, Fosroc, Sika)
125	Structural Steel Work Riveted, bolted or welded in builtup sections, trusses and framed work, including cutting, hoisting, fixing in position and applying priming coat of approved steel primer. all complete as per direction of Engineer-in-Charge.
126	2.5 cm thick A.S Flooring in C.C (1:2:4) including punning using 12 mm size C.B hard granite chips with cost of all labour & other materials etc complete.
127	Supplying, fitting & fixing of Chequered tiles in floors of approved make laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with slurry including cost of all materials, labour T&P etc required for the work all complete as per direction of the Engineer-in-charge
128	Filling at all depth with available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 15cm in depth: consolidating each deposited layer by ramming and watering complete (lead upto 100m) as directed by the Engineer-In-charge. (compound wall)
129	Construction of granular Sub-base by providing Coarse graded Granular sub-base Grading-IV material as per table 400-1 ,spreading in unifrom layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC , and compacting with vibratory roller to achieve the desired density complete as per Clause 401 of MoSRT&H Specifications for road & Bridge works(5th. Revision) .
130	Providing laying and compacting graded stone agregate to wet mix macadum specification including premixing the material with water at OMC in mechanical mix plant,carriage of mixed material by tipper to site, laying in uniform layer with paver in sub-base and base course on well prepared surface and compacting with vibratory roller to achive desired density etc complete as per the direction of Engineer-in-charge .
131	Supplying and fixing of 80mm thick cement concrete interlocking paver block of M-40 grade of approved make, design, colour and size made by Block making machine with proper compaction laid in required pattern etc. complete in all respect conforming to IRC SP-63:2018 as per direction of the Engineer-in-charge.
132	Pcc M30 Using Concrete Mixture for construction of road as per direction of the Engineer-in-charge.
133	Supplying and fixing of Pre cast kerb stone of size 300mm x 300mm x 150mm of M-30 grade of approved make, design, colour and size made by Block making machine with proper compaction fixed in required pattern etc. complete in all respect conforming to IS 5758:1984 as per direction of Engineer in charge.
134	ELECTRICAL
135	Wiring in PVC Conduit: Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor sIngle core cable in surface /recessed PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
136	Group A
137	Group B
138	Group C
139	Subsequent point of group control
140	Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required.
141	2X1.5Sq.mm + 1 X1.5 Sqmm. earth wire
142	2X2.5Sq.mm + 1 X2.5 Sqmm. earth wire
143	2X4Sq.mm + 1 X4 Sqmm. earth wire
144	4X4Sq.mm + 2X4 Sqmm. earth wire
145	Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required.
146	5/6A switch
147	15/16A switch
148	3pin 5/6A socket
149	6pin 15/16A socket
150	Supplying and fixing following size/ modules, GI box along with modular base and cover plate for modular switches in recess etc as required.
151	3 Module
152	4 Module
153	Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required. (Note: Vertical type MCB TPDB is normally used where 3 phase outlets are required.
154	4 way (4 + 12), Double door
155	6 way (2+6), Double Door
156	Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required. (Note: Vertical type MCB TPDB is normally used where 3 phase outlets are required.
157	40A TPN (mcb) 10KA
158	Supplying and fixing 5A to 32A RATING ,240/415V ,10KA,\\"C\\" CURVE,MCB suitable for inductive load of following poles in the existing MCB DB complete with connections,testing and commissioning etc. as required.
159	Single pole (16A)
160	single pole (10A)
161	Supply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal(Aluminium alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al body. Power Factor not less than 0.9
162	1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum) ceiling fan with Regulator
163	Supply, Installation, Testing & Commissioning of 225 mun dia Exhaust Fan as per direction of EIC of approved make equivalent to Bajaj make product code-70079 including all materials & labour etc. (Make: BAJAJ/ORIENT/Havells/CG/Usha)
164	LED Batten light (System lumen efficacy ≥105 <120 lm/Watt) Supplying, installation, Testing & Commissioning of LED surface mounted Batten light of following body material and construction as per IS: 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, freq 50/60 hz, Operating temp range -15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection THD <10%, P. F.20.95, IP20, CRI >80, Flicker free, (flicker should be below 5%), life time (LED, Driver & electrical circuitary), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K/4000°K /5700°K/6000K/6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/Embossing/Screen printing on housing. complete in all respect i/c connections with 1.5 sq mm FRLS, PVC nsulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy 2105 <120 Im/Watt output. LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C).Powder coated die cast /Extruded aluminium Body (Thickness > 1.20 mm)
165	18Watt
166	30watt
167	LED Batten light (System lumen efficacy ≥105 <120 lm/Watt) Supplying, installation, Testing & Commissioning of LED surface mounted Batten light of following body material and construction as per IS: 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, freq 50/60 hz, Operating temp range -15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection THD <10%, P. F.20.95, IP20, CRI >80, Flicker free, (flicker should be below 5%), life time (LED, Driver & electrical circuitary), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K/4000°K /5700°K/6000K/6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/Embossing/Screen printing on housing. complete in all respect i/c connections with 1.5 sq mm FRLS, PVC nsulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy 2105 <120 Im/Watt output. LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C).Powder coated die cast /Extruded aluminium Body (Thickness > 1.20 mm)
168	18-22 Watt
169	8-10watt
170	Mirror Light
171	Bay light 80watt Model no. GAZELLAHBP80WLD857PBOPC Make:- Havells
172	LED Flood Light, powder coated pressure die cast aluminium (System lumen efficacy ≥105 <120 lm/Watt). Supplying, Installation, Testing & Commissioning of Flood Light, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 °C to 50 °C, internal surge protection of 5 KV L,N,E as per IEC 61000- 4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI ≥70, under voltage and over voltage protection, EMI-EMC as per CISPR -15, lenses for beam angle 30 deg-120deg as per the application and the project requirement., suitable tilt able fitting, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained
173	70 watt LED Flood Light
174	Supplying and fixing PVC batten/ angle holder including connections etc. as required. (PVC Batten/ Angle Holder)
175	Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal/coke and salt) as required.
176	Charcole
177	Supplying and laying 6 SWG G.I. wire at 0.50 Meter below ground level for conductor earth electrode, including connection/termination with Gl thimble etc.
178	supply & Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.
179	4c×16 sq mm (Al.)
180	4c×35 sq mm (Al.)
181	4c×50 sq mm (Al.)
182	Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
183	4 X 16 sq. mm (28mm)
184	4c×35 sq mm (32 mm)
185	4c×50 sq mm (35 mm)
186	Supply, installation, testing & commissioning of wall mounting front operated front access extensible type cubicle panel totally enclosed, dust and vermin proof with IP-42/55 protection with hinged and lockabale doors. CRCA sheets including interconnections, tinned copper crimping lugs, bonding to earth and painting suitable for use at 415 V. 3phase 4 wire 50 Hz system, and to withstand a fault level of 35 KA symmetrical for 1 sec at 415 V complete as per specifications, as required and as below: All switchboards shall have provision for entry of cables from the bottom as required. All live accessible parts shall be shrouded and all equipment shall be finger touch proof. The bus bars shall be insulated with heat shrinkable sleeves.SMC/DMC shrouds and busbar supports shall be used with Indication lamp, C.T, Digital Voltmeter, Digital Ammeter and control fuse etc. complete. (Panel)
187	100A MCCB (incoming 4 Pole)
188	125 A 36 KA MCCB (incoming 4 Pole)
189	40A TPN (outgoing) 15KA
190	Multifunction Meter
191	R,Y,B Indicator
192	100A/5A CT
193	125A/5A CT
194	Rotary operated handle
195	Spreader link
196	Supply of Panel ,transportation, Installation with Busbar.
197	EXTERNAL LIGHTNINGSupply, installation, testing & commissioning of wall mounting front operated front access extensible type cubicle panel totally enclosed, dust and vermin proof with IP-42/55 protection with hinged and lockabale doors. CRCA sheets including interconnections, tinned copper crimping lugs, bonding to earth and painting suitable for use at 415 V. 3phase 4 wire 50 Hz system, and to withstand a fault level of 35 KA symmetrical for 1 sec at 415 V complete as per specifications, as required and as below: All switchboards shall have provision for entry of cables from the bottom as required. All live accessible parts shall be shrouded and all equipment shall be finger touch proof. The bus bars shall be insulated with heat shrinkable sleeves.SMC/DMC shrouds and busbar supports shall be used with Indication lamp, C.T, Digital Voltmeter, Digital Ammeter and control fuse etc. complete. (Panel)
198	100A MCCB (outgoing 4 Pole)
199	125 A 36 KA MCCB (outgoing 4 Pole)
200	250 A MCCB 36 KA (incoming 4 Pole)
201	40A TPN (outgoing) 15KA
202	Multifunction Meter
203	R,Y,B Indicator
204	250A/5A CT
205	Rotary operated handle
206	Spreader link
207	Supply of Panel ,transportation, Installation with Busbar.
208	7 Mtr long single arm Tubular pole made-out of G.I sheet of 3mm thikness with a bottom size 125mm and top of 50mm with base plate, anchor bolt,complete with foundation and coil earthing
209	4 Mtr G.I (50mm dia)Tubular Poles suitable for installation of Post-up Lamp complete with foundation and coil earthing
210	70 Watt LED street Light are aerodynamically designed for all weather conditions with excelent thermal management, made with pressure die cast housing with toughened glass and high power LED's with secondary optics and IP66 protection. Efficacy>110/120 LPW, available with 10KV SPD
211	40 Watt post top lantern with weather proof indirect lighing solution which improves horizontal uniformity, with IP 65 rating. (post top 14 nos for road lighting + 2 nos for gate lighting)
212	: 415 V, 40 Amps, 4P, MCCB : 1 Nos.: 415 V, 100 Amps TP + N + E Al. Busbar (25 KA): 1 set: Voltmeter 0-500 Volt 96 sqmm flush type with selector switch : 1 Each: Ammeter, 96 sqmm flush type with selector switch & 40/ 5 Amp CTs : 1 Set: Indicating lamps (RYB) with control MCB. : 1 Set: 25 Amp. 4 pole, 10 KA, 415V, 50 Hz MCB : 03 Nos.: Power contractor 4 pole, 40 Amp., 415V, 50 Hz. :01 Nos.: Contact multiplier : 6A, NO/NC as required : 2 No: Selector / Test switches as required in control circuitSurge arrestor : B/C type : Danger notice plate.Note: The contactors shall be controlled by a Time switch / Digital with adjustable time of switching 'ON' and 'Off' the lamps throughout the year; mounted inside the Feeder pillar.
213	supply & Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.
214	4C X 10 Sqmm (Al.)
215	4c×70 sq mm (Al.)
216	Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
217	4c X 10 sq. mm
218	4c×70sq mm
219	PH and Sanitary Estimate
220	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge.(Make: ASTRAL /SUPREME/ORIPLAST OR EQUIVALENT. )
221	20 mm CPVC SDR 11 pipes
222	25 mm CPVC SDR 11 pipes
223	32 mm CPVC SDR 11 pipes
224	Providing all materials, labour, T&P for laying/ fixing of following dia UPVC pipes Sch-80 as per ASTM-D-1785/2004 including fixing of required size UPVC fittings like bend, Tee, elbow, offsets etc. and the same fixed on wall or floor with holder bat clamps screw etc. as per specification and direction of Engineer-in-charge.(Make: ASTRAL /SUPREME/ORIPLAST OR EQUIVALENT. ).
225	25 mm UPVC sch 80 pipes
226	32 mm UPVC sch 80 pipes
227	40 mm UPVC sch 80 pipes
228	50 mm UPVC sch 80 pipes
229	65 mm UPVC sch 80 pipes
230	Providing all materials, labour, T&P for laying/fixing of following dia UPVC pipes as per IS-4985 with ISI mark including fixing of required size UPVC fittings like,bend,Tee,elbow,offsets,etc. and the same fixed on wall or floor with holder bat clamps screw in all floors or laying in trenches including excavation of earth work in all kinds of soil & backfilling the trenches as per specification & testing the joints with required water presure etc. as per specification and direction of Engineer-in-charge.(Make: ASTRAL /SUPREME/ORIPLAST OR EQUIVALENT. ).
231	50mmP.V.C.S.W.R.Pipe 6kg/cm2
232	Supplying all labour T & P for Cutting grooves through the wall or floor for taking PVC pipes and mending good the damages etc.all complete.
233	Wall & floor cutting
234	Supplying all labour T & P for Cutting holes through the brick or laterite, masonarry wall for taking sand cast iron (SCI) pipes or A.C pipes and manding good the damages etc.all complete.
235	For 15mm to 50mm dia pipe to pass in 125mm to 250mm thick wall
236	For 75mm to 150mm dia pipe to pass in 250mm thick wall
237	Supplying all materials, labour, T&P and cutting hole in R.C.C floors, roofs, etc upto 19 cm thick for passing G.I. Pipes / P.V.C pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4 ) including finishing complete so as to make it leak proof as per direction of the Engineer-in-charge.
238	Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR Type B soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing,Excluding earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer-In-Charge.(Make: ASTRAL /SUPREME/ORIPLAST OR EQUIVALENT. )Rain Water Pipe .
239	110mm U.P.V.C.S.W.R.Pipe 6kg/cm2 .
240	110mm U.P.V.C.S.W.R. Door bend
241	110mm U.P.V.C.S.W.R.45 degree bend
242	110mm U.P.V.C.S.W.R. plain bend
243	110mm U. P.V.C. Clip/Clamp
244	110 mm U. P.V.C.S.W.R. cowl
245	Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR Type B soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing,Excluding earthwork in excavation in all kinds of soil and refilling of trenches , Sewer ,waste water &stack line pipe from bathroom & toilet etc. as per specification and direction of Engineer-in-charge. .(Make: ASTRAL /SUPREME/ORIPLAST OR EQUIVALENT. )
246	110mm U.P.V.C.S.W.R.Pipe 6kg/cm2
247	110mm U.P.V.C.S.W.R. plain bend
248	110mm U.P.V.C.S.W.R. Door bend
249	110mm U.P.V.C.S.W.R. DoorTee
250	110mm U.P.V.C.S.W.R. plain Y Tee
251	110mm U.P.V.C.S.W.R. coupler
252	110mm U.P.V.C.S.W.R.45 degree bend
253	110mm U.P.V.C.S.W.R. P -trap
254	110mm U. P.V.C. Clip/Clamp
255	110mm U.P.V.C.S.W.R. Off set bend
256	110mm U.P.V.C.S.W.R. cowel
257	110mmx 75mmx25mm U. P.V.C.S.W.R. Multi -trap
258	110x75mm U.P.V.C.S.W.R. reducer socket
259	Supplying, fitting and fixing of following types CP other fittings of approved make and quality confirming to relevant IS specifications with leak proof threaded joints including the cost of all materials, cost of labour, conveyance, taxes, loading, unloading, T&P, etc, all complete as per the direction of Engineer-in-Charge. Make : JAQUAR/ROCA/GROHE/KOHLER OR EQUIVALENT
260	15mm dia C P brass 2 Way bib cock with wall flange
261	15 mm CP brass Angular Stop Cock
262	Hand shower (Health Faucet) with 8mm dia 1.00 mtr long flexible Tube & wall hook with NRV.
263	15mm dia C.P. brass Piller cock Auto Closing System
264	Auto Closing Concealed Urinal Flush Valve With wall Flange.
265	C P.Robe Hook
266	Waste Coupling 32mm size Full Thread with 130mm height.
267	Soap Dish (Polycarbonate)
268	Toilet Paper Roll Holder with Shelf.
269	Pillar Cock with Extended Lever Handle ,For PH Toilet.
270	Soap Dispenser,0.8L Capacity,ABS finish White/Smoked
271	C P Bottle TRAP 32 mm size with 250mm& 190mm Long wall Connection Pipes &Wall Flange.
272	Supplying, fitting and fixing of following types fittings of approved make and quality confirming to relevant IS specifications with leak proof threaded joints including the cost of all materials, cost of labour, conveyance, taxes, loading, unloading, T&P, etc, all complete as per the direction of Engineer-in-Charge.
273	15mmx25mm longCP Extention piece
274	15mm PVC Connection Pipe
275	125mm CP grating
276	15mm C.P. Flange
277	Supplying all materials labour T & P fitting & fixing of white glazed vitreous china ware porcelain counter basin approved make including all jointing materials and cost,taxes,conveyance etc all complete as per P.H. specification and direction of Engg-in-charge. Make JAQUAR/HINDWARE/PARRYWARE OR EQUIVALENT
278	Porcelain Under Counter Basin Size : 485x370x205mm
279	Supplying all materials labour T & P fitting & fixing of white glazed vitreous china ware porcelainWall Hung Basin & Half pedestal of approved make including all jointing materials and cost, taxes, conveyance etc all complete as per P.H. specification and direction of Engg-in-charge. Make JAQUAR/HINDWARE/PARRYWARE OR EQUIVALENT
280	Wall Hung Porcelain Basin Size : 620x480x185mm & Half Pedestal.
281	Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet (European type W.C. pan) with integral 'p' or 's' trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing etc all complete as per specification and direction of the Engineer-In-Charge. Make JAQUAR/HINDWARE/PARRYWARE OR EQUIVALENT.
282	Floor Mounted Square type White colour EWC with' S ' Trap, Soft Close Seat Cover, Hinges,Fixing Accessories and Accessories Set.Size: 540x350x395mm
283	Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main etc all complete as per the specification and direction of the Engineer-in-charge. Make JAQUAR/HINDWARE/PARRYWARE OR EQUIVALENT.
284	10 Liters capacity PVC cistern with 32mm dia flush bend
285	Supplying all materials, labour, T&P and fixing Flat back large pattern urinal including connecting the urinal with 50mm dia pvc waste pipe, including cutting holes in walls land making good the damages with supply of wooden plugs, screws and cement etc all complete as per specification and direction of the Engineer in charge. Make: JAQUAR / HINDWARE / PARRYWARE OR EQUIVALENT
286	Urinal (Back Inlet) with Fixing Accessories,Size:385x325x635mm.
287	Providing and fixing 5\\"x5\\" size Square type stainless steel floor clean out Cover with Seal for floor /nahani trap etc complete as per specification and direction of the Engineer in charge.
288	Providing all materials, labour, T&P for fixing of Bevelled edge mirror mounted on 6mm thick AC back sheet & CP cup screw with PVC wall plugs in all floor including cost, conveyance, taxes of all materials complete as per specification and direction of E.I.C.
289	Mirror (600x450mm) of 6mm thick
290	Fixing of Following size Brass / Gun metal ball Valve confirming to IS : 781-1995 of of approved make as per specification complete as per direction of Engineer-in-charge.( Make: SHAKTI /ZOLOTO/VENUS or Equivalent)
291	25mm dia Brass / Gun meta ball Valve
292	32mm dia Brass / Gun meta ball Valve
293	40mm dia Brass / Gun meta ball Valve
294	50mm dia Brass / Gun meta ball Valve
295	65mm dia Brass / Gun meta ball Valve
296	Fixing Rotational moulded polyethylene triple layer white cylendrical vertical water tank storage of required capacity conforming to IS : 12701--1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 10 metres above ground level and placing the tank to the required position etc all complete as per specification and direction of the Engineer in charge. make: Sintex/Astral/Ashribad or Equivalant.Fixing Rotational moulded polyethylene triple layer white cylendrical vertical water storage tank of 2000 ltr capacity,ISI Marked.
297	Supply and fixing all materials, labour, T & P and providing Granite urinal partition Slab of size 500mm (W) X 1200 mm(H)etc all complete as per direction of the Engineer-In-Charge.
298	Providing all materials, labour, T&P for fitting and fixing of white glazed vitreous china water closet (European pattern) 'P' or 'S' type 660MMX350MMx880MM SIZE with cistern & seat cover, wash hand basin of size 460mmx360mmX180MM SIZE with one pair basin bolt,waste Coupling, 2 nos. Hinge Rail & 4 nos. grab bars 692 mm long including supply of sutaible PVC wall plug and Brass screws etc. suitable for handicapped toilets in Ground floor etc. all complete including cost, taxes and conveyance as per specification all complete as per direction of Engineer-in-charge. Make JAQUAR /HINDWARE / PARRYWARE OR EQUIVALENT.
299	Supply all materials, labour, T&P and providing fitting & fixing (Aquaguard) pure Chill 80 PSS UV of size 750x570x1350 mm height with water storage capacity 120 liters along with 2 nos of fancets 1 for cold water and 1 for normal water including a flow of 1.5 ltr per minute etc. all complete as per approved drawing, specification and direction of the EIC.Make:-BLUESTAR/KENT/AQUA GUARD OR EQUIVALENT.
300	BORE WELL -Construction of production wells including scientific source finding through consolidated and unconsolidated rock with down the hammer drilling rig or combination rig with PVC pipe with all acessories
301	Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/ P.V.C/ M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore onlyLabour for drilling of 200mm dia & 150mm dia bore from '0' mtr. to '100' mtr.
302	Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materialsLowering of 200mm (8'') dia PVC plastic pipes Sch-80 as per ASTM-D-1785/2004 upto required depth.
303	Supplying polyvinyl chloride pipes as per ASTM-D-1785-89 having threads in accordance with DIN 2999 part-1/DIN-42225 part-II specification length of pipe (laying length) will be 3 mtrs. The pipes shall be supplied with both external and threaded with free socket. The pipe having external thread at one end i.e female and or belled end. The female end having internal thread is to be belled in order to accept the male end while jointing pipes with a bore threading shall be provided with a greave at the roof of the male thread accomodate flexible PVC/Rubber 'O' ring to make the joint water tight colour of the pipe shall be blue. The name of the manufacture along with batch No class of pipe shall be stranded legibly of each pipe length.Cost of 200mm dia (Sch.80) PVC Casing Pipe.
304	Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge.
305	Supplying all materials, labour, T&P and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5m below ground level (as per drawing) to plug the bore hole including cost of cement all complete as per direction of the Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock at the bottom to ensure sanitary sealing .
306	Providing Pumping System for Bore Well.
307	Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge. 3 H.P.@ 9821.62/HP (Provisional) Make:- CROMPTON/KRILOSKAR/TEXMO OR EQUIVALENT.
308	Control Panel (BCH/CROMPTON/C&S Anmol OR EQUIVALENT.)
309	HDPE Pipe
310	Cable
311	Tochan Rope(8mm)
312	Acessories(Clamp,Bore Cover,S/S Nipple,Bend,Socket ,etc.)
313	Plumber Charges.
314	Providing & Constructing UGR of 2.50m x2.00mX1.50m size(5000 ltrs.Capacity) including earth work in excavation, back filling,RCC Wall in C C (1:1.5;3) in four sides to make chamber, Plain Cement Concrete (1:3:6) 100mm thick in bottom of chamber with 40mmdown graded Crusher broken hard granite metal, inside 6mm thick cement plaster 12mm thick in CM 1:4 & neat cement punning , Top slab in RCC (1:1.5:3) 125mm thick with necessary centering & shuttering, TMT steel reinforcement 10 mm dia both way, SFRC manhole cover of size 600mmx600mm with frame, makingthe floor of chamber with necessary slopeusing CC 1:2:4 complete with all materials, labour, tools, plant, royalty, curing, etc. in all respects as per the direction of Engineer-in-charge.
315	Earthwork Excavation of the foundation pit in all kinds Soil.
316	Earthwork Excavation of the foundation(1st depth up to 1.5mt.)
317	Earthwork Excavation of the foundation(2nd depth from 1.5mt.to 3.0mt.)
318	100 mm thick Sand Filling well watered and rammed.Foundation-1x5.30mx3.10mx0.10m=1.64 Cum.
319	100 mm thick Plain Cement Concrete (1:3:6) Using 40mm CBHG Metal
320	RCC with Cement Concrete (1:1.5 :3) using 12mm Size crusher broken granite chips including hoisting &laying,all complet.( Foundation, RCCwall &cover slab)
321	Providing Centring &Shuttering for RCC Foundation&Plinth band .
322	Providing Centring &Shuttering for RCC Wall &Fin
323	Providing Centring &Shuttering for RCC Roof Slab.Roof Slab-1x4.20mx2.00m=8.40Sqmtr.1x2(4.50m+2.30m)x0.125m=1.70Sqmtr.
324	Supplying HYSD Steel Reinforcement and cutting ,bending, binding,tying the grill including all the cost and as per direction of Engineer-in-charge.(@0.8Quintal/cum of RCC Work)
325	Filling Foundation & Plinth with excavated earth including watering.
326	Disposal of surplus/ excavated materials by mechanical means within 5km. Lead away from the site including cost of all labour , T&P complete as per the direction of the Engineer-in-charge.
327	6 mm thick Cement Plaster in CM (1:4) to RCC surface finished smooth including closed deep chipping & slurry treatment and neat Cement Punning to inside surface of UGR.
328	Plain Cement Concrete (1:2:4) Using 12mm CBHG CHIPS for benching UGT floor.
329	Supplying ,Fitting & Fixing of SFR Polypropylene Foot Step iron inside UGR.
330	Cost towards Factory madeSFRC MH Cover (Medium Quality) Fixed in in the Groove made in RCC Cover Slab.
331	Supply all materials, labour, T&P and providing fitting & fixing Centrifugal Monoblock Pump set in cluding all fittings to lift water from UGR to Overhead Storage Tank .1 HP or Required size. ( Provisional ) Make:- CROMPTON/KRILOSKAR/TEXMO OR EQUIVALENT.
332	Supplying all materials, labour, T & P and constructing Gully trap chamber of inside size 300mmx300mmx450mm with 300mm x 300mm size SFRC cover with frame and embaded in concret ,100mm foundation concrete (1:4:8) using 40mm size h.g. metal on bed aound trap over 100mm Sand filling , Fly Ash brickwork in CM (1:5) with Fly Ash bricks having crushing strength not less than75kg/cm2 in P&F,benching & chanelling in CC (1:2:4) mix using 12mm size h.g. chips and inside 12mm thick cement plastering (1:3) finished with neat cement punning, cement plastering (1:3) to outside wall surface including fixing 110mm size PVC gully trap, 150mm x150mm C.I gratig, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering etc. all complete as per aproved drawing, specification and direction of Engineer-in-charge.
333	Supplying all materials, labour, T & P and constructing Inspection chamber of the following inside size with CC (1:4:8) mix using 40mm size h.g. metal on bed over 100mm Sand filling, Fly Ash brickwork in CM (1:5) with Fly Ash bricks having crushing strength not less than75kg/cm2 in P&F , moulding and shaping the channel inside and benching with CC (1:2:4) using 12mm size h.g. chips, 12mm thick cement plastering (1:3) finished with Cement punning to inside , cement Plastering (1:3) to outside , R.C.C. cover slab in (1:1.5:3) using 12mm size h.g. chips withSFRC precast RCC cover of outer size 0.60 m x 0.60m fitted on80mm thick RCC Cover Slab groove , earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering ,curing, conveyance of all materials to worksite , payment of royality , taxes etc. all complete as per aproved drawing , specification and direction of Engineer-in-charge. Inside size 750mm x750mm x450mm.
334	Inside size 600mm x600mm x600mm.
335	Inside size 750mm x750mm x750mm.
336	Supplying all materials, labour, T&P and constructing Circular RCC MHChamber of following inside size including cost of SFRC Man Hole Cover fixed over 200mm thick RCC cover slab embaded in150 mm thick1:2:4 cement concret , cement concrete (1:3:6) using 40 mm size HG metal on bed over 150mm Sand filling,200mmthick RCC Foundation ,200mm Thick RCC Wall&200mmthick RCC cover slab in (1:1.5:3) mix using 12 mm size H.G chips,Cement Concret (1:2:4) mix using 12 mm size H.G chip moulding and shaping the channel inside and benching with CC (1:2:4) mix using 12 mm size H.G chips, 6 mm thick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside ,, ,6mm thick cement plaster1:4 including Cement punning toinside RCC Wall,12mm thick Cement Plaster1:4 to outside wall, fitting & fixing of S.F.R. poly popylene foot step iron, Earth work in all kinds of soil and refilling the cavity around the camber including watering, curing, conveyance of all materials to worksite payment of royalty, taxes etc. all completed as per approved drawing, specification and direction of Engineer-in-charge.
337	Circular RCC MHChamber of Inside dia 900mm ,900mm deep.
338	Addl depth of 0.10m upto 1.70m depth(0.10mtr.=1no.)
339	Circular RCC MHChamber of Inside dia 1.20mm ,1.70mm deep.
340	Addl depth of 0.10m ,above1.70mtr. upto 2.30m depth(0.10mtr.=1no.)
341	Providing all materials, labour, T&P and laying of Centrifugally cast (spun) RCC non pressure pipes of class NP3 with socket & spigot ends confirming to IS-458 with ISI mark in standard lengths suitable for push on joints including lowering the pipes in to trenches to required depth below G.L, with proper allignment & gradient, testing, commissioning, de-watering (if required) including rubber gasket as per IS-5382/1985 with ISI mark with all taxes & duties etc. all complete as per specification & direction of EIC including Providing and laying in trench cement concrete ( 1:3:6 ) with 40mm size hard granite metal in the following type of bedding and hunching for RCC NP3 Spigot socket concrete pipes of the following internal diameter including curing complete as per specification & direction of E-i-c.
342	150mm dia pipe
343	200mm dia pipe
344	Earthwork in excavation in all types of soil for site leveling, foundation, pits, trenches and other civil works upto and including 1.5metre depth and stacking the soil upto a lead of 100 metre and including dewatering, removing slush, shoring and strutting (as required), complete as per specification and as directed by the Engineer-In-Charge. (For Laying of 150mm diaHume sewer pipes&110 mm UPVC Sewer Pipe)
345	UPVC W/S 1x160mtr.x0.5mtr.x0.9mtr.=72.00Cum.150mm-1x170.00mtr.x1.0mtr.x1.5mtr=255.00Cum200mm-1x30.00mtr.x1.0mtr.x1.5mtr=45.00Cum110mm-1x66.00mtrx.0.60mtrx.0.90mtr=35.64 Cum.
346	Providing and laying in trench Cement Concrete(1:3:6) with12mm.size crusher brokn Granite metal for all round encasing 110mm OD UPVC SWRpipes and hunching 150mm internal dia RCC Humepipes including concrete for bedding and curing complete as per PH specification and drawing.110mm OD UPVC SWRpipes(All round 0.30mx.30m )66.00mx.30mx.30m=5.94cum.- 0.64 cum.=5.30Cum. 150mm internal dia RCC Humepipes .Bellow Pipe Rectangular Portion 500mm wide,100mm thick&Cradaling 100mm thickBedding-1x 170Mtr.x0.50Mtr.x0.200Mtr.=17.00Cum.Deduct Pipe- 1x170Mtr.x0.786 x0.5x0.04 =2.67Cum.Net Quantiy- 17.00cum.-2.67 cum=14.33cum. 200mm internal dia RCC Humepipes .Bellow Pipe Rectangular Portion 550mm wide,100mm thick&Cradaling 125mm thickBedding-1x 30Mtr.x0.55Mtr.x0.225Mtr.=3.71Cum.Deduct Pipe- 1x30Mtr.x0.786 x0.5x0.05 =0.59Cum.Net Quantiy- 3.71cum.-0.59 cum=3.12 cum.Total Quantity- 5.30cum.+14.33 cum+3.12cum =22.75cum.
347	Rigid smooth centring and shuttering for R.C.C. works and dismantling then after casting including cost of materials,labour & T & P etc. all complete
348	Filling Foundation & Plinth with excavated earth in trench after completion of laying of Pipe line including watering.
349	Providing & Constructing SEPTIC TANK of 8.70m x 2.10m X3.30m inner size(twin chamber) including earth work in excavation, back filling,RCC Wall in C C (1:1.5;3) in all sides to make chamber, Plain Cement Concrete (1:3:6) 100mm thick in bottom of chamber with 40mmdown graded Crusher broken hard granite metal, inside 6mm thick cement plaster 12mm thick in CM 1:4 & neat cement punning , Top slab in RCC (1:1.5:3) 125mm thick with necessary centering & shuttering, TMT steel reinforcement 10 mm dia both way, SFRC Circular manhole cover(Heavy Duty ) with frame, makingthe floor of chamber with necessary slope complete with all materials, labour, tools, plant, royalty, curing, etc. in all respects as per the direction of Engineer-in-charge.
350	Earthwork Excavation of the foundation(1st depth up to 1.5mt.)
351	Earthwork Excavation of the foundation(2nd depth from 1.5mt.to 3.0mt.)
352	Earthwork Excavation of the foundation(3rd depth from 3.0mt.to 4.5mt.)
353	100 mm thick Sand Filling well watered and rammed.
354	100 mm thick Plain Cement Concrete (1:3:6) Using 40mm CBHG Metal
355	RCC with Cement Concrete (1:1.5 :3) using 12mm Size crusher broken granite chips including hoisting &laying,all complet.( Foundation, RCCwall &cover slab)
356	Providing Centring &Shuttering for RCC Foundation&Plinth band .
357	Providing Centring &Shuttering for RCC Wall &Fin
358	Providing Centring &Shuttering for RCC Roof Slab.
359	Supplying HYSD Steel Reinforcement and cutting ,bending, binding,tying the grill including all the cost and as per direction of Engineer-in-charge.(@1Quintal/cum of RCC Work)
360	Filling Foundation & Plinth with excavated earth including watering.
361	Disposal of surplus/ excavated materials by mechanical means within 5km. Lead away from the site including cost of all labour , T&P complete as per the direction of the Engineer-in-charge.
362	6 mm thick Cement Plaster in CM (1:4) to RCC surface finished smooth including closed deep chipping & slurry treatment and neat Cement Punning to inside surface of Septic Tank.
363	Plain Cement Concrete (1:2:4) Using 12mm CBHG CHIPS for benching SEPTIC TANK floor.
364	Supplying ,Fitting & Fixing of SFR Polypropylene Foot Step iron inside SEPTIC TANK.
365	Supplying fitting & fixing ofCircular SFRC Man hole cover with frame (Heavy duty)
366	Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR Type B soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing,Excluding earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer-In-Charge.(Make: ASTRAL /SUPREME/ORIPLAST OR EQUIVALENT. )Vent Pipe (4Nos.)
367	110mm U.P.V.C.S.W.R.Pipe 6kg/cm2 .
368	110 mm U. P.V.C.S.W.R. cowl
369	Providing & Constructing SOAK PIT of 1.20m dia x3.00m deep size including earth work in excavation, back filling,Using 50mm thickRCC Well ring with nominal reinforcement in C C (1:1.5;3) using 12mm size CBHG Chips to make chamber, and filling with BRICK KHOA 50mm to 100mm size up to 1.20Mtr. depth ,filling Cavity arround the pit with excavated materials complete with all materials, labour, tools, plant, royalty, curing, etc. in all respects as per the direction of Engineer-in-charge.
370	Supply, installation, testing and commisioning of Weighing bridge of 12mlength (with civil, electrical and mechanical complete in all respect) as per the direction of Engineer-in-charge. Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Odisha Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Construction Of Model Mandi At Mahura, Sakhigopal, Puri, Puri-Odisha

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Construction Of Model Mandi At Mahura, Sakhigopal, Puri, Puri-Odisha

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us