|
| 1 | Clearing jungle including up rooting of rank vegetation grass bush wood trees and sapling of girth upto 30cm. Measured at a height of 1 meter above ground level and removal of rubbish upto a distance of 50m. outside the periphery of area cleared as per SI.No. 2.31 |
| 2 | E/W Excavation in Foundation DSR No. 2.3.1 |
| 3 | Providing and injectiong of chemical emulsion for pre contructional antitermite DSR No. 2.35.3.1 |
| 4 | Providing & Laying of Cement: Concrete 1:4:8 of not less then stenght of M150 1Cement:Coarse sand: 8 stone ballast (40mm nominal size)DSR No. 4.1.8 |
| 5 | Ist Class Brick work in 1:6 Cement: Coarse sand mortar DSR No. 6.1.2 |
| 6 | R.C.C. Work 1:1.5:3 with Cement:Coarse sand and20mm gauge approved stone ballast. S.I. No.5.2.2 |
| 7 | Ist Class Brick work in 1:4 Cement: Coarse sand mortar DSR No. 6.4.1 |
| 8 | R.C.C. Work 1/1.5/3 C/CS/20mm Stone Ballast DSR No. 5.3 |
| 9 | Mild Steel including cutting & binding etc. complete DSR No. 5.22.A.6 |
| 10 | Finising walls with Premium Acrylic Smooth exterior paint . DSR No. 13.41.1 |
| 11 | Finising walls with Premium Plastic Emulsion paint . DSR No. 13.45.1 |
| 12 | Providing & Apllying of 1 mmthick Wall Putty Wrok DSR No. 13.80 |
| 13 | 12mm thick Plaster 1/4 C/CS All Complete DSR No. 13.4.1 |
| 14 | E/W in Filling in Plinth up to CartageDSR2.25(a) |
| 15 | Supply and Fixing of Tiles 600X600 mm Vetrified DSR No. 11.41.2 |
| 16 | Painting with synthetic enamel paint DSR No. 13.62.1 |
| 17 | MS Fabrication work all complete DSR No. 10.25.1 |
| 18 | Centring and Shutring DSR No. 5.9.6 |
| 19 | Centring and Shutring DSR No. 5.9.5 |
| 20 | Centring and Shutring DSR No. 5.9.3 |
| 21 | Supply & fixing of Sign board |
| 22 | Flush Door Shutter 30mm DSR No. 9.21.2 |
| 23 | Flush Door For Window DSR 9.130.1 |
| 24 | Earth work excavation in foundation As per D.S.R.2.6 Long wall |
| 25 | Cement concrete C:C 1:5:10 in cement coarse sand and 40mm gauge stone ballast in foundation D.S.R. 4.1.11 |
| 26 | class 150 brick work 1:6 in cement and coarse sand D.S.R 6.1.2 in foundation |
| 27 | E/W filling in ordniary soil by cortage DSR No. 2.25(a) |
| 28 | Ist class brick work 1:6cement: coarse sand mortar in super structer D.S.R.6.4.2 |
| 29 | Laying of R:C:C work 1:1.5:3 with cement: coarse sand & 20mm stone grit D.S.R.5.2.2 |
| 30 | Laying of R:C:C work 1:1.5:3 with cement: coarse sand & 20mm stone grit in slab D.S.R.5.3 |
| 31 | Mild steel cutting & binding D.S.R.5.22.6 |
| 32 | 12mm thick plaster in 1:6 cement fine sand mix mortar in plinth ( inner side) DSR 13.1.2 |
| 33 | 12mm thick plaster in 1:4cement fine sand mix up to GL to PL DSR 13.1.1 |
| 34 | S/F M.S or iron work for fabrication of door / window frame DSR 10.25.2 |
| 35 | P:C:C work in 1:2:4 for Hold fast DSR 4.20.2 D |
| 36 | Providing &appliying of 1mm thick cement base putty DSR 13.80 |
| 37 | Finishing walls with Premium Acrylic Smooth Eterior Paint with Silicone additives of requred shadeDSR 13.46.1 |
| 38 | Wall Painting with Plastic Emulsion Paint of Aapproved Brand All Complete SOR SI .No. 13.83.2. |
| 39 | Painting on G.S sheet with synthetic enamel paint 2 coat Painting with 1 coat priming coat DSR 13.53.1 |
| 40 | Providing &laying of rectified floor tiles 300x300mm with laid on 20mm thick cement mortor 1:4 cement / coarse sand with joint grey slurry with all complete D.S.R. 11.37 |
| 41 | P/F of ceremic glazed wall tiles laid on 1:3 mortar DSR 8.31 PG NO 143 |
| 42 | Supply & fixing of Aluminium Tower bolt 10mm dia 100mm long DSR9.97.5 |
| 43 | Supply & fixing of aluminium silding bolt with nuts & bolts 16mm dia 250mm long DSR9.96.2 |
| 44 | Supply & fixing of Aluminium door Handle 10mm dia 125mm long DSR 9.100.1 |
| 45 | S/F of 110mm dia pvc down pipe complete with rose heads bends as DSR 12.41.2 |
| 46 | supply 25 mm cpvc pipe DSR 18.7.3 PG 281 |
| 47 | Supply of 15 mm cpvc pipe DSR 18.7.1 PG 281 |
| 48 | WHITE GLAZED EARTHERN WARE (INDIAN TYPE) WC PAN DSR 17.01 PG 265 |
| 49 | P/F OF EUROPEAN TYPE WITH SEAT AND LID.10 LTR LOW LEVEL CISTERN DSR 17.3.1 PG 265 |
| 50 | supply of brass bib cock 15 mm DSR 18.49.1 |
| 51 | s/f of urinal DSR 17.4.1 PG 265 |
| 52 | S/F WASH BASIN DSR 17.7.4 |
| 53 | 500 LTR SYNTHETIC WATER TANK 18.48 |
| 54 | Submersible with Boring |
| 55 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil as per SI.No. 2.8.1 |
| 56 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-lll) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) As per SI no. 4.1.8 |
| 57 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level in :1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) as SI No-5.1.2 |
| 58 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III)derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) SI No-5.2.2 |
| 59 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level 1:1.5:3 (1 cement : 1.5 coarse sand (zone-lll) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) Upto Plinth Lvl as SI No-5.2.2 |
| 60 | Brick work with common burnt clay (non modular) bricks of class -150 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) as per SI No- 6.1.1 |
| 61 | Steel reinforcement for R.C.C. work ready to use \\"cut and bend\\" rebars of approved make from factory/workshop to construction site including placing in position and binding all complete in Thermo-Mechanically Treated bars of grade Fe-500D or more. As per SI. No.- 5.22 B.1 |
| 62 | Brick work with common burnt clay bricks of M-150 Class in super structure above plinth level upto floor V level in all shapes and sizes in cement mortar 1:4 (1 cement : 4 coarse sand ) as per SI no 6.13.2 |
| 63 | 12 mm thick cement plaster of mix 1:4 ( 1 cement & 6 course sand ) Outer Side as per IS 13.4.1 |
| 64 | 15 mm thick cement plaster of mix 1:4 ( 1 cement & 4 coarse sand ) Below Plinth as per IS 13.5.1 |
| 65 | Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer,over the plasterd wall surface even and smooth surface as per Sl no. -13.80 |
| 66 | Finishing walls with Acrylic Smooth exterior paint of required shade: New work (Two or more coats applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) as per Sl no. -13.46.1 |
| 67 | Steel work welded in built up sections / framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. In grantings, frames, guard bar, ladder, railing, brackets, gates and similar works as per SI no. 10.25.2 |
| 68 | Suppling at site Angle iron post & Strut of Required size inlcuding bottom to be split and bend at right angle in opposite direction for 10CM length and driling upto 10mm dia etc. Complete DSR NO. 16.19 |
| 69 | Supply and Fixing of G.I. Barbed wire DSR NO. 16.18 |
| 70 | Centering and shuttering including stutting, propping etc. and removal of form. (ii) Column as per SI- 5.9.6 |
| 71 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture as per Sl no. -13.62.1 |
| 72 | Excavation for foundation in ordinary soil including normal lead and lift with all completion of work and including disposal upto three chain minimum. |
| 73 | Concrete with 40mm gauge Brick ballast ,f/sand & cement in proportion of 12;6;1 in foundation and under floors including supply of all materials,labour and T & P etc,required for proper completion of the work. |
| 74 | Construction of g well graded Granular sub-base by providing material,spreading in uniform layers with motor grader on prepared surface ,mixing by mix in place method with rotavator at at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. |
| 75 | First class b/w in 1:4 in cement and coarse sand mortar in foundation and plinth including supply of all materials, labour and T&P etc required for proper completion of work. |
| 76 | S&F of 80mm thick Rubber Moulded Interlocking work |
| 77 | 12 mm thick plaster with cement mortar in proportion of 1:4 with course sand |
| 78 | Earth work in cutting or in embankment in ordinary soil,excation to be in the form of regular pits not exceeding 0.5m in depth etc. |
| 79 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group A |
| 80 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 81 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 82 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. |
| 83 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
| 84 | Supply and fixing of LED Tube Light batten fitting suitable for up to 1 X 22 watt LED tube light on surface complete in all respect. - CAT-AAA |
| 85 | Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 45 watt to 50 Watt. Confirming to IP 66 protection complete in all respect. CAT-AA |
| 86 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 87 | Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Upto 450 mm sweep |
| 88 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. 4 way (4 + 12), Double door |
| 89 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole |
| 90 | Supplying and fixing of 63 Amp. 4 Pole MCB (10KA) \\"C\\" curve, CAT-A |
| 91 | Supply and burring of Safe Earthing Electrode T-19 (Hot Dip Galvanized), Length up to 2000mm, outer pipe 50mm, inner pipe 25, terminal Dia 12 mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonry husing (from electrode terminal to switch board, cost of 25 x 3 G.I . strip will be extra) Make: As approved in U.P. P.W.D., & C.P.R.I. Certified. |
| 92 | Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00,Air deliveryminimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase ACSupply, earthing etc. complete as required. |
| 93 | Wiring point for Power Plug 4X4 Sqm all complete Please Enable Macros to View BoQ information |
