|
| 1 | Taking down chowkhats or frames with out taking off the shutters from the frames not exc 1.50 sqm each and stacking for issuing under credit all as specified and directed |
| 2 | Taking down chowkhats or frames with out taking off the shutters from the frames exc 1.50 sqm and not exc 4.00 sqm each and stacking for issuing under credit all as specified and directed |
| 3 | Taking down shutters of any description exc 1.00 sqm and n exc 2 sqm each and stacking for issuing under credit all as specified and directed |
| 4 | S & F Second class hard wood plain solid chowkhats and frames wrought framed rebated on the solid, rounded or chamferred, put together with glue pinned at joints, all as specified and directed. |
| 5 | S&F 40mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides and both faces are covered with decorative face veneer with lipping/frame to match |
| 6 | M & L Second class hard wood Glazed and skeleton shutters 35 mm thick open rebated and prepared to receive glass, guaze etc. (without sash bars) edges of framing plain chamferred or rounded fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part I kiln seasoned and chemically pressure treated all as specified and directed |
| 7 | Supply and fix Solid PVC door frames size 50mmx 47mm made out of 5mm plain color PVC sheet reinforced with MS squre tube, fixed to openings all as specified and directed |
| 8 | M&L for Factory made solid panel PVC door shutter 30mm thick (styles) consisting of frames made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain color PVC 'C' channel having aPVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain color PVC sheets for top rail, lock rail &bottom rail on either side& as gap insert for top rail and bottom rail; Panneling of plain color PVC sheet to be fitted in the MS frame welded /sealed to the stiles &rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specfication & drawing all as specified and directed |
| 9 | S & F Butt hinges medium weight cold rolled mild steel, and fixed 100 mm size all as specified and directed |
| 10 | S & F Aluminium anodised barrel tower bolts extruded section 200 mm size all as specified and directed |
| 11 | S & F Aluminium anodised barrel tower bolts extruded section 100 mm size all as specified and directed |
| 12 | S & F Extruded aluminium alloy handles fabricated type anodised size 150 mm all as specified and directed |
| 13 | S & F Aluminium alloy anodized sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed 300mm long all as specified and directed |
| 14 | S & F MS hold fast for doors and windows etc complete all as specified and directed. |
| 15 | Supply and fix in repairs for stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and as directed. |
| 16 | Supply and fix stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and as directed. |
| 17 | Preparation of new wood or wood based surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and directed |
| 18 | S&F in repair Floor Door Stopper of Aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floors 140 mm complete all as specified. |
| 19 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames of stone, concrete or brick surrounds, glazed with putty or fixed with beads all as specified and directed |
| 20 | S&F in repairs Sheet glass,4.00 mm thick ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane . |
| 21 | S&F in repairs Figured glass, pin head type, 4mm thick and glazing with oil putty in square n.exc 0.5 sqm in each pane all as specified and directed |
| 22 | M&L in repairs for 18/19 mm thick prelaminated particle board, interior grade,prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work all as specified and directed. |
| 23 | S&F in repairs 75 mm size extruded aluminium alloy handles fabricated type anodised all as specified and directed |
| 24 | S&F in repairs continous (piano) hinges mild steel bright finish or electrogalvanised 30 mm wide(width of flab(when open) all as specified and directed |
| 25 | S&F Ball catches with 8 mm dia steel ball and brass body and striking plate including letting in all as specified and directed |
| 26 | Dismantling ceiling boards any description, any thickness including cover fillets and stacking for issuing under credit all as specified and as directed. |
| 27 | Supply and fix Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5mm fixed to the intermediatechannel with connecting clips across the intermediate channel at 457 mm centre to centre and provide 12mm thick perforated type particle boards fixed or laid/ inserted to aluminium frame work with screws including hangars 6 mm dia G.I (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long(all costs are included) all as specified and as directed. |
| 28 | Dismantling floors, hearth or wall tiling including cement mortar bedding (but not backing) and removing serviceable tiles to store and rubbish off the premises. |
| 29 | M&L for Virified Ceramic tiles dark shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry andpointed in white or coloured cement over 15mm thick rendering in CM 1:6 complete all as specified and as directed by Engineer In-Charge.. |
| 30 | All as per Item No: 29 but in vertical surfaces as Skirting/dado |
| 31 | M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed by Engineer-in- Charge. |
| 32 | M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed by Engineer-in- Charge. |
| 33 | M&L for glazed ceramic coloured tiles 7 to 8 mm thick on vertical surfaces 350 x 250mm / 450 x 350mm, etc set and jointed in neat cement slurry and pointed in white or coloured cement over 10mm thick rendering in CM 1:4 complete all as specified and as directed by Engineer In-Charge. |
| 34 | Taking up or down steel tubing and connections, and removing to store for taking in account of credit for 15mm bore |
| 35 | All as per item No.34 but for 20 mm bore |
| 36 | S & F in repairs of CPVC pipes 20mm dia SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified. |
| 37 | All as per item No.36 above but for 25 mm dia |
| 38 | Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete or PVC) set in cement mortar for 100mm dia or below. |
| 39 | S&F PVC (SWR)110mm bore pipes single sockted in any length with rubber ring joints laid fixed to walls |
| 40 | All as per item No.39 but for 75 mm bore |
| 41 | S&F PVC (SWR) bends any radius 110 mm bore |
| 42 | S&F PVC (SWR) bends any radius 75 mm bore |
| 43 | S&F PVC (SWR) ,single (Double Y) equal or unequal 110 mm bore |
| 44 | S&F PVC (SWR) ,single (single Y) equal or unequal 110 mm bore |
| 45 | S&F PVC (SWR) ,single (Double Y) equal or unequal 75 mm bore |
| 46 | S&F PVC (SWR) ,single (single Y) equal or unequal 75 mm bore |
| 47 | M & L for PVC (SWR) multi floor trap of 75mm dia with grating including jointing with solvent cement etc complete, |
| 48 | S & F PVC (SWR) pipe 75mm dia single sockted in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed. |
| 49 | S & F PVC (SWR) pipe 110mm dia single sockted in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed. |
| 50 | M & L for PVC (SWR) gully trap of 125/110mm dia includingsetting jointing with solvent cement etc complete, |
| 51 | Supply and fix in repairs plastic water closet seat cover, white, closed pattern with flat bottom and cover all as specified and as directed. |
| 52 | S&F in repairs fancy type Bib taps, chromium plated with cruch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed for 15mm bore. |
| 53 | Supply and fix in repairs 15mm dia pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe all as specified and as directed. |
| 54 | Supply and fix in repairs low level PVC flushing cistern white complete with syphonic action type 10 litre capacity including float valve handle, bracket, PVC flush down pipe 32mm dia as required with bend, PVC connection 450mm long with PTMT nut and washers etc complete all as specified and as directed. |
| 55 | S & F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 56 | S&F in repairs vitreous china wash down water closet pan (Pedestal pattern), white including seat cover and flush pipe etc complete all as per specified and as directed by Engineer-in-Charge. |
| 57 | S & F in repairs PVC valveless, syphonic action type, flushing cistern of 10 Ltrs capacity , low level , white, with inlet , ball valve, float and handle including brackets and flush pipe etc complete all as specified and as direted by Engineer-in-Charge. |
| 58 | S&F in repairs of Plastic water closet seat cover white , closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinges device fixed in repairs |
| 59 | Supply and fix in repairs brass chromium plated shower rose with or without swivel joints, 125mm size including fixing to 15mm dia steel pipe, all as specified and as directed. |
| 60 | S & F PVC connections 15 mm size with PTMT nuts of length 450 mm |
| 61 | S& F in repairs PVC waste pipe 32/40mm bore for WHB. |
| 62 | S & F in repairs towel rail 60cm long of brass chromium plated fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 190 gms). |
| 63 | S& F in repair Vitreous China wash basin, white, flat back, size 450x300mm excluding taps, waste, chain and plug and porcelain stopper but including brackets including 32mmPTMT waste coupling complete all as specifed and directed. |
| 64 | S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connection union to pipe, overall size 915X460mm bowl size 410mmX330mmX160mm complete all as specified and directed. |
| 65 | S&F grating doom 125 mm dia with waste hole of PTMT (minimum weight 40 gms) |
| 66 | S&F 600mm x 450mm bevelled edge looking mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers. |
| 67 | Taking down cement plaster on brick or stone walls etc., including ceilings including racking out joints, hacking for key scrubbing down with water etc.,all as directed. |
| 68 | Material and labour for rendering 5mm thick in cement mortar 1:3 on fair surfaces of brick work or concrete surfaces of ceiling in repair finished even and smooth without using extra cement all as specified and as directed work in patches. |
| 69 | Material and labour for rendering 10mm thick in cement mortar 1:6 on fair surfaces of brick work or concrete surfaces of wall , finished even and smooth without using extra cement all as specified and as directed. |
| 70 | Material and labour for preparation of the newly plastered surfaces of ceiling and applying three coats of white wash all as specified and directed. |
| 71 | Material and labour for preparation of newly plastered wall surfaces, applying wall care putty of 1-3 mm thickness and applying two coats of acrylic emulsion distemper over a coat of chalk whiting primer complete all as specified and as directed. |
| 72 | Material and labour for preparation of old decorated wall surfaces and applying one coat of oil bound distemper all as specified and as directed. |
| 73 | Material and labour for preparation of old decorated wall surfaces and applying two coat of oil bound distemper all as specified and as directed. |
| 74 | M&L for complete removal of existing old decorated surface and applying 1-3mm thick wall care putty on walls, complete including scrubbing and brushing all as specified and directed. |
| 75 | Material and labour for preparation of new wall surfaces and applying two coat of oil bound distemper all as specified and as directed. |
| 76 | Material and labour for preparation of old decorated ceiling surfaces and applying one coat of white wash all as specified and as directed. |
| 77 | Material and labour for preparation of old wood & wood based surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and as directed. |
| 78 | Material and labour for preparation of old steel surface over 10 cm in width or girth and applying one coat of synthetic enamel paint all as specified and directed |
| 79 | M&L for preparation of old wall surfaces and applying one coat of white wash complete all as specified and directed. |
| 80 | Removing of demolished building material out side the MD land to a distance exc 1 km upto10 Km including loading and unloading, etc complete all as specified.Note : Location and permission of depositing the building materials/disposal out side the M.D. land shall rest with contractor at his own arrangement. Please Enable Macros to View BoQ information |
