|
| 1 | M&L for Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in epoxy coating grout to match the shade of tiles laid over and including 15mm thick screed bed or bedding layer in CM 1:6 including dismantling of existing floor tiling including cement mortar bedding and removing rubbish off the premises complete all as specified and directed. |
| 2 | M&L for full body Vitrified ceramic coloured tiles 8 to 9mm thick (Square or rectangular) polished, area of each tile n exc 0.36 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in epoxy coating grout to match the shade of tiles laid over and including 15 mm thick screed bed or bedding layer in CM 1:4 including dismantling floor hearth or wall tiling including cement mortar bedding and removing rubbish off the premises complete all as specified and directed. |
| 3 | M&L for Glazed ceramic coloured tiles of size 450x300x7mm thick, as in vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in epoxy coating grout to match fixed over and including rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:4 for receiving wall tiles including dismantling of existing wall tiling including cement mortar bedding and removing rubbish off the premises complete all as specified and directed. |
| 4 | S&F in repair single piece Vitreous china any shade cascade floor mounted single piece water closet P/S trap with dual flush for UF soft close slim seat cover, hinges fittings, conversion bend, fixing accesories complete all as specified and directed. |
| 5 | S&F Vitreous china full set pedestal type wash basin, white, flat back, size 585x450x220mm including bracket, CP brass 32m dia coupling, waste pipe fixed in repair complete all as directed. |
| 6 | S&F in repair PVC connection 15 mm size with brass nuts of length 450 mm complete all as specified and directed. |
| 7 | S&F in repair for bevelled edge looking mirror of of any size, selected quality glass with design as apporoved by GE, frame less and fixed to chromium plated brass screws and studs complete all as specified and directed. |
| 8 | S&F in repair sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed. |
| 9 | S&F in repair Corner glass shelf assembly with bracket complete all as specified and as directed. |
| 10 | S&F in repair toilet paper holder with flap guard fixed to walls with chromium plated brass screws complete all as specified and directed. |
| 11 | S&F in repair soap dish holder fixed to walls with chromium plated brass screws complete all as specified and directed. |
| 12 | S&F in repair soap dispenser fixed to walls with chromium plated brass screws complete all as specified and directed. |
| 13 | S&F in repairs CP brass hot & cold single lever basin mixer with 450mm long braided hoses cast copper alloy with centre hole for WHB to suit pedestal or table top type complete all as directed. |
| 14 | S&F in repairs CP brass hot & cold 15mm dia sink mixer swinging spout (wall mounted model) with connecting legs & wall flanges complete all as specified. |
| 15 | S&F in repair Sink made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement morter on to dwarf wall or inclulding fixing cantilever brackets and connecting union to pipe overall size 495mm x 460mm x 203 mm bowl size 405 mm x 354mm x 203mm complete all as specified and directed. |
| 16 | S&F in repairs 15mm bore long body bib tap chromium plated fancy type with wall flange and aerator fixed in repair complete all as specified and directed. |
| 17 | S&F in repairs CP fancy type Angle valve 15mm dia (angle cock) cast copper alloy with wall flange complete all as specified and directed. |
| 18 | S&F in repairs CP fancy type twin Angle valve 15mm dia (angle cock) cast copper alloy with wall flange complete all as specified and directed. |
| 19 | S&F in repair CP Health faucet telephonic type with 1.5m long flexible CP pipe complete all as specified and directed. |
| 20 | S&F in repair brass chromium plated towel rail, 600mm long complete all as specified and directed. |
| 21 | S&F in repair brass chromium plated towel ring fixed with screw in wall complete all as specified and directed. |
| 22 | S&F in repair PVC (SWR) 110mm dia pipes single socketed, in any length with rubber ring joints, fixed to walls/floors complete all as specified and directed. |
| 23 | S&F in repair PVC (SWR) 75mm dia pipes single socketed, in any length with rubber ring joints, fixed to walls/floors complete all as specified and directed. |
| 24 | S&F in repair PVC bends of 75 mm dia any radius diminishing pieces or tapers complete all as specified and directed. |
| 25 | S&F in repair PVC bends of 110 mm dia any radius diminishing pieces or tapers complete all as specified and directed. |
| 26 | S&F in repair PVC (SWR) floor trap 100mm dia, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 27 | S&F in repair Grating square fitting of size 150mm made in two parts for smell and mosquito proofing with hole for waste pipe complete all as specified and directed. |
| 28 | S&F 15mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete including cutting, chasing in, taking up or down existing steel tubing complete all as specified and directed. |
| 29 | S&F 20mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete including taking up or down existing steel tubing complete all as specified and directed. |
| 30 | S&F 500 Litres capacity rotational moulded polyethylene water storage tanks, three layered, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including 15/20mm dia PTMT ball valve complete set and dismantling of existing unserviceable tank and removing from site complete all as specified and directed |
| 31 | M&L for fully vitrified parking coloured tiles 9 to 10mm thick (Square or rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including laying of 15 mm thick screed bed or bedding layer in CM 1:6 including dismantling of existing floor tiling including cement mortar bedding and removing rubbish off the premises complete all as specified and directed. |
| 32 | M & L for applying a coat of Texture paint of any colour/shed including complete removal of old coating as per manufacture instructions all as specified and directed. |
| 33 | S&F in replacement drapery rod in any length, high strength stainless steel pipe having outer dia 28mm a pair of brackets & a pair of stainless steel finials, complete all as specified and directed. |
| 34 | S&F in repair drapery rod in any length, high strength Brass pipe having outer dia 32mm a pair of brackets & a pair of brass finials, complete all as specified and directed. |
| 35 | S&F Pre-painted colour galvalume aluminium Zinc coating AZ 150 GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws etc including dismantling of existing unserviceable sheets complete all as specified and directed. |
| 36 | S&F Pre-painted colour galvalume aluminium Zinc coating AZ 150 GI based pre profiled (matching with roof sheet) plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridges, gutter including dismantling of existing unserviceable sheets complete all as specified and directed. |
| 37 | M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed |
| 38 | M&L for 15mm thick ready mix cement plaster on brick, concrete surfaces and wall/Ceiling surface finished even & fair, finishing curing scaffolding including taking down of existing cement plaster etc complete all as specified and directed. |
| 39 | M&L for brick work with sub class 'B' bricks (old size) straight or curved on plan exc 6.00m mean radius built in cement mortar (1:6) including demolition of existing brick work complete all as specified and directed. |
| 40 | M&L for applying 3mm thick damp proof wall care putty as per manufacturers instruction, preparation of puttied wall / ceiling by mechanical sander/grinder and applying two coats of oil bound emulsion distemper over a coat of primer complete all as specified and directed. |
| 41 | M&L for preparation of scrapped surface of wall and applying 3mm thick damp proof wall care putty complete all as specified and directed. |
| 42 | M&L for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm as per manufacturers instruction new /Old surfaces ceiling and wall all as per manufacturers instruction and directed. |
| 43 | M&L for preparation of old painted steel surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint with approved shade complete all as specified and directed. |
| 44 | Demolition of cement concrete in ground floor and paving nexc 15cm thickness (below or above ground level) complete all as specified and directed. |
| 45 | M&L for 75mm thick PCC 1:3:6 type C-2 using 20 mm graded crushed stone aggregate as in plinth protection or similar places, and finishing the surface even and smooth without using extra cement including making joints and filling the same with sealing compound with necessary formwork etc complete all as specified and directed. |
| 46 | M&L for 40mm thick PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in floors and finishing the concrete even and smooth with using extra cement complete all as specified and directed. |
| 47 | S&F Door seal bottom for insect prevention with Carbon metal seal strip with rubber insulation, Anti rust, weather proof, soundproof for all door type, brown colour fixed to door with carbon screws complete all as specified and directed. |
| 48 | S&F in replacement 18/19mm thick both side prelaminated colour WPC board for cup board shutter and frame & fixed at site including a pair of Auto closing hinges 35 mm of 0 crank (KH-001) openable at 110 degree/Continuous (piano) hinges stainless steel, bright finish or electrogalvanised width of flap 30 mm and a stainless steel handles of 150 mm size, magnet catcher complete all as specified and directed. |
| 49 | S&F Chromium plated stainless steel wire basket (storage, cup and saucer, Plate, cutlery, Grain Trolley, Bottle pull out) pull out type Grade 304 with necessary fixing clips including ball bearing runners 45 mm Telescopic (KTS-20) full extension load capacity of 50 kgs etc complete all as specified and directed. |
| 50 | M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) pointing in white cement (1:2) using marble dust and half rounding of exposed edges including taking down of existing stone complete all as specified and directed. |
| 51 | M&L for 15mm thick factory made mirror polished Porcelain cover stone (of size 800x3000 mm of any colour) in steps, jambs, pillars, window-cills, cooking platforms and fixed with tile adhesive match with shade including cutting chasing in brick work and half rounding of exposed edges and taking down existing stone complete all as specified and directed. |
| 52 | M & L for machine cut Kota stone 20 to 25 mm thick laid over and including cement screed base laid and jointed with grey cement slurry and pointed in grout to match the shade of the slab including rubbing and mirror polishing to be matched with existing floor incl demolition complete all as specified and directed. |
| 53 | M&L for Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete all as specified and directed. |
| 54 | M&L for PCC 1:2:4 type B-2 using 20mm graded crushed stone aggregate as in surface channels and drains including desludging/ cleaning of open drain of any depth by mechanically means and burring the sludge into the ground complete all as specified and directed. |
| 55 | Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and directed. |
| 56 | M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65x100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 57 | M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65x125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 58 | S&F factory made single extruded WPC (Wood Polymer Composite) solid both side prelaminated decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. |
| 59 | M&L 35mm thick factory made solid WPC (Wood polymer composite) moulded gauged door shutter (single door piece to be used) with wire mesh in any number of division with brown wood grain texture, including stainless steel wire shall mesh be fixed with 15x15 Square tube in side rails with screwing 8x28 heat metal zinc coated screws can be remove or fix again after changing of wire mesh when needed. The density shall be as per manufacturer instruction complete all as specified and directed. |
| 60 | S&F 300mm mild steel ordinary rat tail rod pattern spring including roller and roller plate fixed to wooden/mild steel chowkhat complete all as specified and directed. |
| 61 | Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area n exc 1.5 Sqm each complete all as specified and directed. |
| 62 | Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area .exc 1.50 Sqm and n exc 4.00 sqm each complete all as specified and directed. |
| 63 | S&F factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor includes cost of glass and all other connected accessories. Net opening will be measured for payment purpose.) |
| 64 | S&F factory made uPVC white colour fixed window made of extruded profiles with wall thickness of 2.3mm(+-0.2mm). Window profile with hollow section with multi chamber. Frame (60mmx58mm). T profile (Onevertical length in between two shutters) (60mm x 74mm). Glazing bead (35mmx20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware, EPDM gasket. 1.2 +–0.2mm thick, galvanized steel Frame (28mm x 21.5mm), T profile (27mm x 17 mm) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners- 5mm thick glazing with selected quality glass (Note: The unit rate quoted by contractor includes cost of glass and all other connected accessories Net opening will be measured for payment purpose.) |
| 65 | S&F made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm (+-0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 5mm thick glazing with selected quality glass. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) |
| 66 | S&F Steel ventilator factory made with centre hung shutter double rebated (measured as one) including wire mesh, glass, hinges and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and directed. |
| 67 | Taking down any type of door fittings complete all as specified and directed. |
| 68 | M&L for welded steel wire fabric weight n exc 4kg/sqm fixed/welded to wood or steel members complete all as specified and directed. |
| 69 | S&F Mild steel framed work such as grills, grating etc with end of bars shouldered and/ or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing and similar work complete all as specified and directed. |
| 70 | S&F Butt hinges, 100 mm long, extruded stainless steel with galvanised mild steel or SS hinge pin anodised complete all specified as directed. |
| 71 | S & F 150 mm butt hinges, cast brass with mild steel hinge pin bright polished type B-11 complete all as specified and directed. |
| 72 | S&F 250mm long Stainless steel, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections complete all as specified and directed |
| 73 | S&F 300mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts complete all as specified and directed. |
| 74 | S&F 150mm long stainless steel handles, fabricated type, complete all as specified and directed. |
| 75 | S&F 300mm long designer Extruded brass handles, fabricated type polished complete all as specified and directed. |
| 76 | S&F 150mm long stainless steel barrel tower bolts of extruded section complete all as specified and directed. |
| 77 | S&F 200mm Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and directed. |
| 78 | M&L for PCC 1:3:6 Type C-2 using 40mm graded crushed stone aggregate as in foundation of man hole incl demolition of existing cement concrete of any description complete all as specified and directed. |
| 79 | M&L for Cleaning the manhole up to 1.50m deep by rodding manually and removing the sludge from manhole and completely cleaning by flushing with water etc complete , sludge shall be buried into ground and covered with the enough quantity of lime to stop the foul smell complete all as specified and directed. |
| 80 | M&L for Cleaning the sewage line up to 150mm dia by rodding manually and removing the sludge and completely cleaning by flushing with water etc complete , sludge shall be buried into ground and covered with the enough quantity of lime to stop the foul smell complete all as specified and directed. |
| 81 | M&L for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear mtr including drilling and plugging holes etc. in apron complete all as specified and directed. |
| 82 | S & F factory made 40mm thick 1st class H.W wood/teak decorative plain framed glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc. (with sash bars), divided in to square, edges of framing plain, chamfered or rounded, fitted with cut and mitered bead for securing glasses etc, size of members of shutters as specified in SSR Part-I, Section- 8, Clause 8.20 (a) complete all as specified and directed. |
| 83 | S & F Ist Class hard wood (teak), Plain or semi circular in chowkats or scantling & frame wrought rounded or chamfered put together with glue pinned joints and fixed complete all as specified and directed. |
| 84 | S & F 4.8 mm thick sheet glass selected quality glazing in square exc. 0.5 sqm in each pane fixed with wooden moulding complete all as specified and directed. |
| 85 | M&L for french polishing on wooden surface of any discription width or girth including cleaning and preparing the surface including a coat of wood filler but one or more coat on new work complete all as specified and directed. |
| 86 | M&L french polishing on wooden surface of any discription width or girth including cleaning and preparing the surface including a coat of wood filler but one or more coat on old work incl complete removal of exiting paint complete all as specified and directed. |
| 87 | S&F in replacement 1mm thickness of lath Steel rolling shutters, with ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, push pull or manual type complete all as specified and directed. |
| 88 | S&F in repair vitreous china urinals half stall white incl CP urinal Spray Nozzle complete incl providing and fixing of plug bedding urinal against wall in cement motor 1:2 securing urinal to plug with and incl 60mm long brass screws pointing incl 60mm long brass complete all as specified and directed. |
| 89 | M&L for providing and fixing 25 to 30mm thick plaster of paris ceilling/wall POP designer frame ( gypsum anhydrous) to flat surface over 2nd class soft wood fillets,or metal frame work and reinforced ,with G.I. wire mesh for any sunk or raised moulding upto height of 5m above floor level including scaffolding complete all as specified and directed. |
| 90 | S&F in repair Vitreous china Counter top wash basin, white including coupling, waste pipe and all accessories complete all as specified and directed. |
| 91 | S&F stainless steel sheet gde 304, 1.00mm thick fixed with stainless steel screws with washer in wall cladding complete all as specified and directed. |
| 92 | S&F stainless steel sheet grade 304, 1.0mm thick inside open channel including made to shape as per drain shape and fixed with SS screws at top complete all as specified and directed. |
| 93 | S&F stainless steel gde 304 angle fixed with stainless steel screws at corner of wall & top of drain as a protection complete all as specified and directed. |
| 94 | S&F stainless steel gde 304 grills, grating for drain in kitchen etc complete all as specified and directed. |
| 95 | Excavation in trenches n. exc 1.5m wide and n. exc 1.5 m depth for foundation or for shaft etc n. exc 10 sqm on plan and n.exc 1.5m in depth and getting out in soft/ loose soil complete all as specified & directed. |
| 96 | Returning, Filling in, with excavated soil including spreading leveling, watering and well ramming in layers not exc 25cm thick in soft/ loose soil complete all as spesified & directed. |
| 97 | Removing excavated material (soil) to a distance exc. 50 m but n exc. 250 m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed. |
| 98 | M&L for Shingle filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled, and blinded with earth and rammed including watering complete all as specified and directed. |
| 99 | M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggt as in sub base filling and mass concrete finished even and fair complete all as specified and directed. |
| 100 | M&F for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, for rough finished concrete surfaces complete all as specified and directed. |
| 101 | M & L Formwork to sides of pillars, posts, struts, piers, columns and stanchions, for flat & rough finished surfaces of concrete complete all as specified and directed. |
| 102 | M & L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for flat & rough finished surfaces of concrete Complete all as specified and directed |
| 103 | M&L TMT bar 10 mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for column and binding with wire 0.90 mm dia complete all as specified |
| 104 | All as per Item No 103 above but 8 mm dia as in stirupps, spacers and binders complete all as specified and directed. |
| 105 | M&L for RCC 1:2:4, nominal mix type B-1 (using 20 mm graded aggregate ) as in foundations, including rafts, footings, bases for columns, etc. complete all as specified and directed. |
| 106 | M&L for RCC 1:2:4, nominal mix type B-1 (using 20 mm graded aggregate ) as in columns, pillars, piers, posts and struts etc complete all as specified and directed. |
| 107 | M&L for RCC 1:2:4, nominal mix type B-1 (using 20 mm graded aggregate ) as in beams, cantilevers, bressummers, lintels, etc over 1.5m span complete all as specified and directed. |
| 108 | S&F MS angle/TEE/Hollow/tubular section as in main and cross beams, hips and jack rafter, purlins, trussess where connected to common rafters and etc. confoming to Fe-290 Gde E-165 complete all as specified and directed. |
| 109 | S&F 4mm thick (incl 0.5mm alloy on both side) coloured (as approved by GE) Aluminium Composite Panels (ACP) sheet fair finished and gaps should be sealed with weather proof silicon sealant fixed on ACP base framing with SS hollow pipes and required fasteners complete all as directed. |
| 110 | S&F 3.0 mm thick acrylic plain sheet any colour fixed with coach screw complete including taking down existing old PVC sheet of any description all as specified and directed. |
| 111 | S&F 10-12mm thick solid teak wood wall panelling and fixing at site on wooden frame incl solvent cement and accessories with two coat of melamine polishing over a coat of wood filler and primer complete all as specified and directed. |
| 112 | M&L carpet flooring consisting of an upper layer of pile (visible fibres) area of each tile not exceeding 0.36 Sqm, in floors etc, set and jointed with glue including cleaning and repair of damaged flooring including dismantling floor tiling including cement mortar bedding complete all as specified and directed. |
| 113 | S&F in repair 8 mm thick HDF laminated wooden Flooring over and including 2 mm thick Foam sheet over a layer of polythene film sheet over finished top finished floor and including skirting complete all as specified and directed. |
| 114 | M&L for 25mm thick precast cement louvres and jallies with 1:2:4, type B-0, (using 12.5mm graded) (measured solid) set and jointed in CM 1:4 including all mouldings and dismantling of existing complete all as specified and directed. |
| 115 | M&L for rubberised precast prepolished coloured concrete Interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 grade laid over & including 25mm thick sand cushioning layer including dismantling of existing damaged flooring etc complete, all as specified and directed. |
| 116 | M&L for R.C.C. 1:2:4 nominal mix type B-1 (20mm graded agg) Slabs supported on walls, beams and columns in floors, roofs, canopies, deck slabs and in shelves and the like all including demolition of existing slabs and necessary formworks. |
| 117 | S&F Stainless steel plate rack of size 24 inch X 24 inch X 10 inch nominal complete all as specified and directed. |
| 118 | S&F toughened & laminated 18mm thick with design etched (as directed) fixed on floor/roof with & including suitable stainless steel angle/tube/channel complete with all accessories required to sustain the structure complete all as specified and directed. |
| 119 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surface of walls, floors, etc complete all as specified and directed. |
| 120 | Taking down existing old Exhaust fan and deposit to MES store yard of any size and capacity complete all as specified and directed. |
| 121 | Taking down existing old Water Heater of any capacity and deposit to MES store yard complete all as specified and directed. |
| 122 | Taking down old unserviceable main switches, Sheet metal enclosures DB including MCCBs, MCBs etc including making good to the disturbed surface of wall complete all as specified and directed. |
| 123 | Taking down old unserviceable tube light of any size and capacity complete all as specified and directed. |
| 124 | Taking down existing ceiling fan of any capacity and make serviceable by replacing unsv parts and preparation of old painted surface body and blades of ceiling fan of any capacity ,cleaning foreign material ,filling cavaties atc and painting with one coat of synthetic enammeled paint by spray painting and marking MES No. with paint and kept in safe custody and refixing at site after compltion of bldg work. |
| 125 | Taking down carefully submain wiring including all accessories without disturbing existing wiring fittings fixtures etc and making good to the disturbed surfaces all as directed and as specified in any type and size all as directed. Please Enable Macros to View BoQ information |
| 126 | Taking down carefully submain wiring including all accessories without disturbing existing wiring fittings fixtures etc and making good to the disturbed surfaces all as directed and as specified in any type and size all as directed. Please Enable Macros to View BoQ information |
