|
| 1 | Excavating trenches by mechinical / manual means of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m: All kinds of soil Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia |
| 2 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 3 | Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform |
| 4 | Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 5 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Cold twisted bars |
| 6 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4(1 cement :4 coarse sand) |
| 7 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble Area of slab over 0.50 sqm |
| 8 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approvedmake, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 9 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding |
| 10 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm |
| 11 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 150x10 mm |
| 12 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm |
| 13 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper |
| 14 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick |
| 15 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. |
| 16 | Providing and laying vitrified floor tiles in diferent sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm |
| 17 | Providing gola 75x75 mm in cement concrete 1:2:4(1 cement :2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement: 3 fine sand) as per standard design : In 75x75 mm deep chase |
| 18 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. |
| 19 | Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main \\"T\\" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross \\"T\\" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main \\"T\\" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross \\"T\\" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16 mm thick fire retardant PVC film on the face side and 12 micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit. |
| 20 | Providing and fixing GI Clip in Metal Ceiling System of 600x600 mm module which includes providing and fixing ‘C’ wall angle of size 20x30x20mm made of 0.5mm thick pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300 mm center to centre, suspending the main C carrier of size 10x38x10mm made of G.I steel 0.7 mm thick from the soffit with help of soffit cleat 37x27x25x1.6 mm, rawl plugs of size 38x12 mm and C carrier suspension clip and main carrier bracket at 1000 mm c/c. Inverted triangle shaped Spring Tee having height of 24 mm and width of 34 mm made of GI steel 0.45 mm thick is then fixed to the main C carrier and in direction perpendicular to it at 600 mm centers with help of suspension brackets. Wherever the main C carrier and spring T have to join, C carrier and spring T connectors have to be used. All sections to be galvanized @ 120 gms/sqm (both side inclusive), fixing with clip intiles into spring 'T' with : GI Metal Ceiling Clip in plain Beveled edge global white color tiles of size 600x600 and 0.5mm thick with 25 mm height, made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending. |
| 21 | 15 mm cement plaster on the rough side of single or half brick wall of mix: 1:6 (1 cement: 6 fine sand) |
| 22 | 6 mm cement plaster of mix: 1:3(1 cement :3 fine sand) |
| 23 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour: New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre |
| 24 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 Itr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) |
| 25 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work |
| 26 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 27 | Regrading terracing of mud phaska covered with tiles or brick, in cement mortar by dismantling tiles or bricks, removing mud plaster, preparing the surface of mud phaska to proper slope, relaying mud plaster gobri leaping and tiles or bricks, grouted in cement mortar 1:3 (1 cement : 3 fine sand), including replacing unserviceable tiles or bricks with new ones and disposal of unserviceable material to the dumping ground (the cost of the new tiles or brick excluded), all complete as per direction of Engineer-in- Charge. |
| 28 | Flush pointing with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement for flat tile bricks on top of mud phaska : With F.P.S. brick tiles |
| 29 | Repair to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge. |
| 30 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (including equivalent design mix) |
| 31 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm |
| 32 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 33 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. |
| 34 | Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms. |
| 35 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work - Exposed on wall 15 mm dia nominal bore |
| 36 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work - Exposed on wall 20 mm dia nominal bore |
| 37 | Providing and fixing brass stop cock of approved quality : 20 mm nominal bore |
| 38 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :20 mm nominal bore |
| 39 | Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length 15 mm nominal bore |
| 40 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 15 mm nominal bore |
| 41 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 20 mm nominal bore |
| 42 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 43 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore |
| 44 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore |
| 45 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 : 15mm nominal bore |
| 46 | Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge.15mm nominal bore |
| 47 | Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 200 mm diameter |
| 48 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : 200 mm diameter S.W. pipe |
| 49 | Dismantling of old S.W. pipes including breaking of joints and bed concrete stacking of useful materials near the site within 50 m lead and disposal of unserviceable materials into municipal dumps : 200 mm diameter |
| 50 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 51 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 52 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm) |
| 53 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg., for doors, including cost of cutting floors ,embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. With brass cover plate minimum 1.25 mm thickness. |
| 54 | Providing and fixing machine moulded aluminium covering of approved pattern & design,made out of machine cut aluminium sheet and machine holed for receiving dash fastener, over expansion joints on vertical surfaces/ceiling floors, the fixing on plate in one row on one side of joint only shall be done with stainless steel dash fasteners of 8 mm dia and 75 mm long bolt including providing aluminium washers 2 mm thick & 15 mm dia , at a staggered pitch of 200mm centre to centre including drilling holes in the receiving surface and providing expandable plastic sleeves in holes etc. complete as per direction of Engineer-in-charge. Anodised aluminium sheet 2.5mm thick (anodised transparent or dyed to requiread shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 55 | Providing and fixing Pvc soil, waste and vent pipes : 110 mm dia: PVC pipe 6 kg/cm2 pressure fenolex/kisan make |
| 56 | Providing and fixing Pvc soil, waste and vent pipes : 75 mm dia: PVC pipe 6 kg/cm2 pressure fenolex/kisan make |
| 57 | Providing and fixing Stainless steel grating of apprived quality and colour circular type 100 mm Nominal Dia. |
| 58 | Providing and fixing PVC trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :. Finolex/Kisan/Prince make. |
| 59 | Providing and fixing plain bend of required degree. 110 mm dia PVC of Finolex/Kisan/Prince make.as per direction of Engineer-in- charge. |
| 60 | Providing and fixing PVC Tee of 110 mm dia of finolex/Kisan/Prince make. As per direction of Engineer-In-Charge. |
| 61 | Providing and fixing PVC Tee of 75 mm dia of finolex/Kisan/Prince make. As per direction of Engineer-In-Charge. |
| 62 | Providing and fixing door tee of required degree 110 x 110 x 110 mm dia PVC of finolex/Kisan/Prince make. As per direction of Engineer-In-Charge. |
| 63 | Providing and fixing PVC juncion 110 x 110 x 110 mm dia PVC of finolex/Kisan/Prince make. As per direction of Engineer-In-Charge. |
| 64 | Providing and fixing PVC door bend of required degree 110 mm dia PVC of finolex/Kisan/Prince make. As per direction of Engineer-In-Charge. |
| 65 | Providing and fixing Stainless Steel A ISI 304 (18/8) Electric Tandoor ( 750x750mm ) as per IS:13983 with ,Round drum inner heater,kitchen appliance to mimic the high-heat cookingusing electrical heating elements and ,C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Size ( 750x750mm ) |
| 66 | Providing and fixing Stainless Steel A ISI 304 (18/8) Griller with one under shelve ( 600x600mm ) as per IS:13983 ,the grilling surface with skewers, steaks, corn, and buns, plus storage features like a warming drawer and pull-out traywith C.I. brackets and stainless steel shelves, including painting of fittings and brackets, cutting and making good the walls wherever required :Griller under one selves ( 600x600mm ) |
| 67 | Providing and fixing Stainless Steel A ISI 304 (18/8) Working Top table with two under shelves ( 1920x600mm ) as per IS:13983 designed as workstation with stainless steel, often with storage or foldable features for kitchens with S.S. brackets and stainless steel shelves, including painting of fittings and brackets, cutting and making good the walls wherever required : Working Top table under two selves ( 1920x600mm ) |
| 68 | Providing and fixing Stainless Steel A ISI 304 (18/8) Three Burner Bhathi ( 1200x 600mm ) as per IS:13983 heating or cooking ,run on LPG,insulation to withstand high temperatures with C.I. brackets and stainless steel shelves, including painting of fittings and brackets, cutting and making good the walls wherever required :Three Burner Bhathi ( 1200x 600mm ) |
| 69 | Providing and fixing Stainless Steel A ISI 304 (18/8) Working Table with single sink ( 1500x600mm ) as per IS:13983 with S.S. brackets and stainless steel shelves, including painting of fittings and brackets, cutting and making good the walls wherever required :Working Table with single sink ( 1500x600mm ) |
| 70 | Providing and fixing Stainless Steel A ISI 304 (18/8) Double Burner Bhathi size ( 1050x 600mm ) as per IS:13983 heating or cooking ,run on LPG,insulation to withstand high temperatures with C.I. brackets and stainless steel shelves, including painting of fittings and brackets, cutting and making good the walls wherever required : Double Burner Bhathi ( 1050x 600mm ) |
| 71 | Providing and fixing Stainless Steel A ISI 304 (18/8) Preparation table Working Table with two under Shelves ( 1800x 600mm ) as per IS:13983 designed as workstation with stainless steel, often with storage or foldable features for kitchens with S.S.. brackets and stainless steel shelves, including painting of fittings and brackets, cutting and making good the walls wherever required : Working Table under two selves ( 1800x 600mm ) |
| 72 | Providing and fixing Stainless Steel A ISI 304 (18/8) Tawa/dosa maker one heater shelves with two under shelves ( 1050x 600mm ) as per IS:13983 with C.I. brackets and stainless steel shelves, including painting of fittings and brackets, cutting and making good the walls wherever required : Tawa/dosa maker one heater shelves under two shelves( 1050x 600mm ) |
| 73 | Providing and fixing Stainless Steel A ISI 304 (18/8) Single bowl Sink size ( 600x600mm ) as per IS:13983 finish, and added features like drain boardswith S.S. brackets and stainless steel shelves, including painting of fittings and brackets, cutting and making good the walls wherever required : Single bowl Sink ( 600x600mm ) |
| 74 | Providing and fixing Stainless Steel A ISI 304 (18/8) Table Chapti Rolling Table with under two shelves ( 1250x450mm ) as per IS:13983 Rectangular shape, polished finish, corrosion-free,with C.I. brackets and stainless steel shelves, including painting of fittings and brackets, cutting and making good the walls wherever required : Chapti Rolling Table under two salves Table ( 1250x450mm ) |
| 75 | Providing and fixing Stainless Steel A ISI 304 (18/8) Table with under shelves ( 1200x450mm ) as per IS:13983 Rectangular shape, polished finish, corrosion-free,with C.I. brackets and stainless steel shelves, including painting of fittings and brackets, cutting and making good the walls wherever required : Table under salves Table ( 1200x450mm ) |
| 76 | Providing and fixing Storage racks (Two shelves) size ( 1200x 600mm) as per IS:13983 ,Compact spice rack, rust-resistant with C.I. brackets and stainless steel body , including painting of fittings and brackets, cutting and making good the walls wherever required : Storage racks Two shelves size ( 1200x 600mm) |
| 77 | Providing and fixing Storage racks (Three shelves) size ( 1200x 600mm) as per IS:13983 ,storage for jars, bottles, groceries with C.I. brackets and stainless steel body , including painting of fittings and brackets, cutting and making good the walls wherever required : Storage racks Three shelves size ( 1200x 600mm) |
| 78 | Providing and fixing Dish landing Table ( 1200x 600mm) as per IS:13983 with C.I. brackets and stainless steel body , including painting of fittings and brackets, cutting and making good the walls wherever required :Dish landing Table ( 1200x 600mm) |
| 79 | Providing and fixing Three unit sink Bowl sink ( 1800 x300mm ) as per IS:13983 Large triple bowl, rust-resistant ,proper drainage wastewater efficiently with S.S brackets and stainless steel body , including painting of fittings and brackets, cutting and making good the walls wherever required :Three unit sink 3Bowl sink ( 1800 x300mm ) |
| 80 | Providing and fixing Over head dish rack /Pot Rock , shelves 1800 x600mm ) as per IS:13983 with C.I. brackets and stainless steel body , including painting of fittings and brackets, cutting and making good the walls wherever required :Over head dish rack Pot Rock , shelves 1800 x600mm ) |
| 81 | Providing and fixing clean dish rak (3to 4 shelves) ( 1200x600 mm ) as per IS:13983 with C.I. brackets and stainless steel body , including painting of fittings and brackets, cutting and making good the walls wherever required :Pot Rock Table 3to 4 shelves ( 1200x600 mm ) |
| 82 | Providing and fixing Two unit sink ( 2 Bowl sink) ( 1200 x600mm ) as per IS:13983 with S.S brackets and stainless steel body , including painting of fittings and brackets, cutting and making good the walls wherever required :Two unit sink 2 Bowl sink ( 1200 x600mm ) |
| 83 | Providing and fixing Vegetable racks (Three shelves) size ( 1200x 500mm) as per IS:13983 with S.S. brackets and stainless steel body , including painting of fittings and brackets, cutting and making good the walls wherever required :Vegetable racks (Three shelves) size ( 1200x 500mm) |
| 84 | Providing and fixing Vegetable racks (Two shelves) size ( 970x 500mm) as per IS:13983 with S.S. brackets and stainless steel body , including painting of fittings and brackets, cutting and making good the walls wherever required :Vegetable racks (Two shelves) size ( 970x 500mm) |
| 85 | Providing and fixing Vegetable Cutting table size ( 400x 600mm) as per IS:13983 with S.S. brackets and stainless steel body , including painting of fittings and brackets, cutting and making good the walls wherever required :Vegetable Cutting table size ( 400x 600mm) |
| 86 | Providing and fixing Stainless Steel A ISI 304 (18/8) Working Table with under two Shelve ( 750x 600mm ) as per IS:13983 designed as workstation with stainless steel, often with storage or foldable features for kitchens with S.S. brackets and stainless steel shelves, including painting of fittings and brackets, cutting and making good the walls wherever required : Working Table under two selves ( 750x 600mm ) |
| 87 | Providing and fixing Manifold joint cylinder for gass pipes and specials, including testing of joints. |
| 88 | Pig tail connection Providing and fixing Pig tail for gass connection pipe with Nuts, collar and bush of approved quality and colour,including testing of joints. |
| 89 | Providing and fixing N.R.V. unitech for Gass connection pipe, fittings of approved quality and colour. |
| 90 | Providing and fixing Adopter unitech for Gass connection pipe, fittings of approved quality and colour. |
| 91 | Providing and fixing Emergency valve for Gass connection pipe, fittings of approved quality and colour. |
| 92 | Providing and fixing Manifold valve unitech for Gass connection pipe, fittings of approved quality and colour. |
| 93 | Providing and fixing Clip 1inch for Gass connection pipe, fittings of approved quality and colour. |
| 94 | Providing and fixing Clip 1/2inch for Gass connection pipe, fittings of approved quality and colour. |
| 95 | Providing and fixing 15 pound Regulator for Gass connection pipe, fittings of approved quality and colour. |
| 96 | Providing and fixing 0.50 pound rgulator for Gass connection pipe, fittings of approved quality and colour. |
| 97 | Providing and Gass connection pipe with Nuts, collar and bush of approved quality and colour.connection pipe 5feet length |
| 98 | PITC of new Gass connection including, cutting and threading the gas pipe and making long screws, including painting , uniform plain welding, refilling the earth or cutting of wall and making good the same complete wherever required:including testing of joints, purging with an inert gas etc. complete. |
| 99 | Consultancy services for Complete Architectural Layout & Kitchen Design and drawing including interior design and Plan, elevation & Sectional elevation mentioning full details, detailed calculation & Drawing . Submission of Building Design and drawing including kitchen layout ,Gass pipe line layout , plumbing /water supply line layout ,Kitchen exhaust smoke layout Plan for burner/heater and Plan, cross section drawing, elevation & Sectional elevation of full details, detailed calculation, & Drawing as per latest I.S. Code in 3 copies (Soft & hard). Site visit and servising of kitchen layout and building drawing. |
| 100 | SCHEDULE OF WORK (ELECTRICAL WORK) |
| 101 | SH: I - Wiring Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (Group-B) etc. Including makin surface good as orginal with cement plaster putty & paint as required and dismantling the existing wiring conduit pipe etc as required. |
| 102 | Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required.. (Group-B) Including makin surface good as orginal with cement plaster putty & paint as required and dismantling the existing wiring conduit pipe etc as required. |
| 103 | Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. (a) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire Including makin surface good as orginal with cement plaster putty & paint as required and dismantling the existing wiring conduit pipe etc as required. |
| 104 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 X 4 sq. mm + 1 X 4 sq. mm earth wire Including makin surface good as orginal with cement plaster putty & paint as required and dismantling the existing wiring conduit pipe etc as required. |
| 105 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 4 X 4 sq. mm + 2 X 4 sq. mm earth wire |
| 106 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel / PVC conduit as required. (a) 3 x 4 sq. mm |
| 107 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel / PVC conduit as required. (a) 6 x 4 sq. mm |
| 108 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. (a) 25 mm Including makin surface good as orginal with cement plaster putty & paint as required and dismantling the existing wiring conduit pipe etc as required. |
| 109 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. (a) 32 mm Including makin surface good as orginal with cement plaster putty & paint as required and dismantling the existing wiring conduit pipe etc as required. |
| 110 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. (a) 5/6 amps switch |
| 111 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. (a) 3 pin 5/6 amp socket outlet |
| 112 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. (a) 15/16 amps switch |
| 113 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. (a) 6 pin 15/16 amp socket outlet |
| 114 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. a) 1 or 2 Module (75mmX75mm) Including makin surface good as orginal with cement plaster putty & paint as required and dismantling the existing Metal Box etc as required. |
| 115 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. a) 3 Module (100mmX75mm) Including makin surface good as orginal with cement plaster putty & paint as required and dismantling the existing wiring conduit pipe etc as required. |
| 116 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. a) 8 Module (200mmX75mm) Including makin surface good as orginal with cement plaster putty & paint as required and dismantling the existingMetal Box etc as required. |
| 117 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. a) 12 Module (200mmX150mm) Including makin surface good as orginal with cement plaster putty & paint as required and dismantling the existingMetal Box etc as required. |
| 118 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required Including makin surface good as orginal with cement plaster putty & paint as required and dismantling the existingMetal Box etc as required. |
| 119 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings). Including makin surface good as orginal with cement plaster putty & paint as required and dismantling the existing Metal Box etc as required. |
| 120 | Supplying & fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, \\"C\\" curve including connections, painting etc. as required. Including makin surface good as orginal with cement plaster putty & paint as required and dismantling the existingMetal Box etc as required. |
| 121 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) a) 12 Way, Double Door |
| 122 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). 6 way (4 + 18), Double door Including makin surface good as orginal with cement plaster putty & paint as required and dismantling the existing DB etc as required. |
| 123 | Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's (but without MCB's and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required. a) 4 way (4 + 12), Double door Including makin surface good as orginal with cement plaster putty & paint as required and dismantling the existing DB etc as required. |
| 124 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. A) Single pole |
| 125 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. A) Double Pole |
| 126 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. A) Triple Pole |
| 127 | Supply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal(Aluminium alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al body. Power Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, remote (preferably mobile app based) for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 0C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC supply Ceiling Fan compliant to IS 374:2019 fan i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required. 1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum i/c dismentling the existing existing ceiling fan etc as required. |
| 128 | Providing and fixing 100 Amp rating and 25 KA breaking capacity Triple pole 415 volt MCCB With Fixed Thermal Magnetic Trip Unit (TMD) with alluminume bus bar link in existing vertical TPN DB making connections, |
| 129 | Supplying and fixing PVC batten/ angle holder including connections etc. as required Including makin surface good as orginal with cement plaster putty & paint as required and dismantling the existing light holder etc as required. |
| 130 | Supplying and fixing following modular USB Charger socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. (a) USB Charger 2.1 A Single Port |
| 131 | Supplying and fixing following modular Ac Starter on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 132 | Dismantling of existing LT wall mounted / outdoor panel of any size and capacity, including disconnection of incoming and outgoing cables, removal of glands, nuts, bolts, busbar connections etc. complete as directed by Engineer-in-Charge Please Enable Macros to View BoQ information |
