|
| 1 | Demolition of brick work/block work or precast article built in cement or lime mortar, complete all as specified and as directed. |
| 2 | M&L for precast cement concrete block masonry with solid block, type C-1,(1:3:6) mix (using 20mm graded aggregate ), exc 10cm in width and setting in cement mortar (1:6) complete all as specified and as directed. |
| 3 | Taking down cement plaster on brick or stone wall,dado and skirting etc including racking out joints hacking for key scrubbing down with water etc, complete all as specified and as directed |
| 4 | M&L for 15mm rendering thick in CM (1:4) on fair faces of brick work/concrete surfaces finished even & smooth (without using extra cement), complete all as specified and as directed |
| 5 | M&L for rendering 15mm thick in CM(1:6) on fair faces of brick work/concrete surfaces, finished even & smooth (without using extra cement),complete all as specified and as directed |
| 6 | M&L for Preparing newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of putty to make the surface to be plain and smooth complete all as specified and as directed |
| 7 | M&L for preparation of new plastered surfaces of wall and applying two coat of weather proof exterior grade emulsion paint over and including a coat of cement based primer, complete all as specified and as directed. |
| 8 | S&F Gl frame work for seamless ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and as directed. |
| 9 | M&L for 12 mm thick Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having Philips head with under head cutter at 200 mm centre to centre, including finishing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish (Frame work for ceiling shall be measured and paid separately) The work shall be carried out as per specifications, drawing and complete all as specified and as directed. |
| 10 | M&L for surface preparation of new plastered surface and applying two coats of oil bound distemper on ceiling over one coat of primer and 1 mm thk putty etc, complete all as specified and as directed. |
| 11 | Demolition of cement concrete (un-reinforced ) of any description and in any position not otherwise specifically provided complete all as specified and as directed. |
| 12 | M&L for 40 mm thick Cement concrete type B-1,(1:2:4) (Using 20mm graded aggregate) in sub base of flooring/ hard standing complete all as specified and as directed. |
| 13 | M&L for PCC (1:2:4) type B1 (Using 20 mm graded stone aggregate) as Edge stops etc complete all as specified and as directed. |
| 14 | M&L for RCC M-25 (design mix) using 20 mm graded stone aggregate as in Roof Slab supported on walls complete all as specified and as directed. |
| 15 | M&L for Use and Waste of Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.flat rough finished surfaces of concrete complete all as specified and as directed. |
| 16 | M&L for High Strength deformed TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally and binding with and including mild steel wire (annealed) not less than 0.90 mm dia complete all as specified and as directed. |
| 17 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises complete all as specified and as directed.. |
| 18 | M&L for joint free Vitrified ceramic coloured tiles of size 600x1200mm and 8 to 10 mm thick (square /rectangular), in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM (1:6) complete all as specified and as directed. |
| 19 | Ditto all as per item No 18 above, but on vertical surfaces such as skirting/dado over 10mm thick CM rendering in CM (1:4) complete all as specified and as directed. |
| 20 | M&L for non skid ceramic tiles of size 400x400x 7 to 8mm thick (Square/ rectangular) area of each tile as in floors set and jointed in neat cement slurry and pointed in coloured cement over 15mm thick screed/bedding layer in CM (1:6), complete all as specified and as directed. |
| 21 | M&L for glazed ceramic tiles in vertical surfaces 300 x 450 x 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match colour over 10mm thick rendering in CM (1:4) complete all as specified and as directed. |
| 22 | Taking down wooden chowkhat or frame area exc 1.5 sqm and not exc 4 Sqm each with shutter (without taking off shutter from frame) complete all as specified and as directed. |
| 23 | Ditto all as per item No 22 above but not exc 1.5 Sqm each |
| 24 | S&F Factory made single 30 mm thick extruded WPC (Wood Polymer Composite) solid moulded flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary S S screws included in this item)complete all as specified and as directed. |
| 25 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm (± 5 mm tolerance in dimension) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and as directed. |
| 26 | S&F 35 mm thick Factory Made 100% Solid WPC ( Wood polymer Composite ) Glazed and skeleton Shutter of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cbm manufactured and an ISO 9001 - 2015 Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compressive of 50 N/mm2 Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixing stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws ncl Aluminum Jali and Stainless wiremess as per required complete all as specified and as directed.Note: Material test certificate and authentication should be compulsory provided by the manufacturing company |
| 27 | S & F for Factory made double extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65x125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and as directed. |
| 28 | M&L for 18 mm thick ply wood grade BWR, type BB fixed with screws to timber frame work, block boards, grade 2 quality, interior grade, commercial type , fixed with screws to timber framed work for kitchen cabinat,cupboard etc.complete all as specified and as directed. |
| 29 | M&L for 0.9mm thick decorative laminate type I, of surface finish, colour and pattern as approved , fixed with approved adhesive as per manufacturer, instructions complete all as specified and as directed. |
| 30 | S&F in repair auto closing hinges 35 mm of 0 crank( KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete all as specified and as directed. |
| 31 | S&F of 100 mm butt hinges SS 304 ISI marked and fixed with mild steel wood screws or welded to angle frame, complete all as specified and as directed. |
| 32 | S&F of 200 mm long SS 304 barrel tower bolts, with bright bolt and fixed with screws,complete all as specified and as directed. |
| 33 | S&F of 200 mm long SS 304 handles, (shape as per Engr-In-Charge instruction), and fixed with screws, complete all as specified and as directed. |
| 34 | S&F of 300 mm long SS 304, sliding door bolt plate type, , with bright bolt not less than 12mm dia with and including minimum of 6 bolts and nuts, complete all as specified and as directed. |
| 35 | S&F of 150mm long barrel tower bolt aluminum anodized extruded section fixed with cadmium plated screws complete all as specified and as directed. |
| 36 | S&F of mild steel ordinary rat tail rod pattern springs of size 300mm including roller and roller plate complete all as specified and as directed. |
| 37 | S&F for Door stopper 140 mm of aluminium alloy body anodised with tongue of rubber bush at one end fixed to door complete all as specified and as directed. |
| 38 | S&F Rubber bush of 25mm long fixed to door complete all as specified and as directed. |
| 39 | S & F for aluminum powder coated (powder coated of required colour) three track sliding windows frame top & sides of size 92 x 31.75 x 1.50mm (section No 20831) bottom of size 92 x 31.72 x 1.50mm (Section of 20832) and shutter top & bottom of size 40 x 18 x 1.55 (section 20738) and lock side shutter frame of size 40 x 15 x 1.45mm (Section 20737) with rubber gasket, beading and locking arrangement including making good to the disturbed portion complete including stainless steel wire mesh 0.36mm nominal dia with 1.40mm average aperture and fixed with stainless steel wire staples and fixing 5mm thick glass with necessary rubber beading gasket etc complete all as specified and as directed. |
| 40 | S&F powder coated anodised aluminum shutter for window / ventilator shutters ,including necessary joining cleat, glazing cleap ,rubber neoprene packing, snap beading handle, hinge, screw etc complete for fixing complete all as specified and as directed.(Thickness of powder coating not less than 50 Micron) |
| 41 | S&F sheet glass 4.00 mm thick ordinary quality and glazing with oil putty in square exc 0.5sqm in each pane complete all as specified and as directed. |
| 42 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire average width of aperture 1.40 mm and fixed in steel window with aluminium clip / wooden beading /stainless steel nut bolt complete all as specified and as directed. |
| 43 | S&F drapery rod in any length, high strength stain less steel pipe with corrugated stain less steel extrusion having outer dia 25mm complete all as specified and as directed. |
| 44 | S&F decorative knobs stainless steel with suitable brackets in matching colour of rod complete all as specified and as directed. |
| 45 | M&L for preparation of old plastered surface and washing rubbing down of distempered and painted surface and complete removal of existing treatment and applying two coats of oil bound distemper over a coat of putty on old plastered surface of internal wall complete all as specified and as directed. |
| 46 | M&L for complete removal of existing treatment by brushing, washing, rubbing down, scraping, watering and applying one coat of weather proof exterior grade emulsion paint over and including exterior grade cement based primer, complete all as specified and as directed.. |
| 47 | S&F of PVC connection 450 x 15mm dia PTMT (PVC),complete all as specified and as directed. |
| 48 | S&F of 1st quality vitreous china ware European type WC with \\"P\\" or \\"S\\" type traps with integrated flushing cistern and same make plastic seat cover of white colour including , fixing bolts etc and making good of the wall & floor surface, complete all as specified and as directed. |
| 49 | S&F of 4mm thick bevelled edge looking mirror of selected quality glass, having PVC moulding/beading all around, mounted on 4mm thick PVC board, with and incl fixing accessories, complete all as specified and as directed. |
| 50 | S&F of two way bib cock, 15 mm dia with wall flange made of cast copper alloy, chromium plated, complete all as specified and as directed. |
| 51 | S&F in replacement of long body bib cock, 15 mm dia with wall flange made of cast copper alloy, chromium plated, complete all as specified and as directed. |
| 52 | S&F in replacement of hand shower (health faucet) with 8 mm dia, 1.0 mtr long flexible tube, wall hook and wall flange made of cast copper alloy, chromium plated fancy type, complete all as specified and as directed. |
| 53 | Supplying and laying of 16 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified and as directed. |
| 54 | Supplying and laying of 20 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified and as directed. |
| 55 | S&F in repairs vitreous china ware wash basin white, flat back size 550 X 400mm including 32 mm CP waste coupling, chain and plug, waste fittings, union and waste pipe 32mm dia or required length and all necessary inlet, out let PVC connections 600 mm complete all as specified and as directed. |
| 56 | S&F CP brass hot & cold 15mm dia wash basin mixture for mixing hot & cold water with connecting legs & flengs in complete all as specified and as directed. |
| 57 | S&F CP brass hot & cold 15mm dia wall mixture for mixing hot & cold water with shower provn with connecting legs & flengs in complete all as specified and as directed. |
| 58 | S&F Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed. |
| 59 | Demolition of RCC not exc 15cm thickness in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work,complete all as specified and as directed. |
| 60 | S&F of PVC (SWR) pipe of 110 mm nominal dia size, wall thickness of 3.5 mm, Type A, in any length, single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end socketed, duly fixed with cement solvent etc, complete pipe duly laid in trenches or in floors,complete all as specified and as directed. |
| 61 | S&F of Ringfit PVC (SWR) pipe of 75 mm nominal dia size, wall thickness of 3.5 mm, Type A, in any length, single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end as self socketed with an integral groove to hold the rubber gasket, with and incl rubber tighten gaskets, ringfit sockets etc, complete pipe duly fixed to wall,/floor complete all as specified and as directed. |
| 62 | S&F 110 mm bore PVC (SWR) bends of any radius, complete all as specified and as directed. |
| 63 | S&F 75 mm bore PVC (SWR) bends of any radius, complete all as specified and as directed. |
| 64 | S&F 110 mm bore PVC (SWR) junction single (Single `T') equal or unequal, complete all as specified and as directed. |
| 65 | S&F 75 mm bore PVC (SWR) junction single (Single `T') equal or unequal,complete all as specified and as directed. |
| 66 | S&F PVC (SWR) vent cowl 100 mm bore, jointing to waste pipe, complete all as specified and as directed. |
| 67 | S&F PVC floor trap of 75 mm outlet, jointing to waste pipe, complete all as specified and as directed. |
| 68 | Taking out broken sewage line at a depth n.exc 1.5m and replacing with new sewage pipe line with DWCPE pipe 150/175 mm (ID/OD) complete laid in trenches including earthwork, removal and return filling and jointed including testing alongwith necessary jointing material tees/ union / socket etc complete laid on PCC beed 150 mm thick PCC in (1:2:4) type B0 of avg depth 2.0 m including packing under and haunching against the side of pipes after they are laid and tested all as specified in IS 16098:2013 and complete all as specified and as directed. |
| 69 | S&F SS grating of squre/round shape, overall size of 150x150mm with hinge type openable jali of 100 mm dia size with and incl fixing with CM to floor/nahani traps etc,complete all as specified and as directed. |
| 70 | M&L for rotational moulded PVC storage Water tanks with approved ISI Mark/first quality, 1000 liters capacity, cylindrical vertical and closed top, three layer, incl tank cover, hoisted and fixed in position complete all as per SSR Part-1 complete all as specified and as directed. |
| 71 | M&L for 500 litre loft storage water tank with approved ISI Mark/first quality, 500 liters capacity, rectangular type and closed top, white/black color, including tank cover, hoisted and fixed in position complete all as specified and as directed. |
| 72 | S&F galvanised mild steel medium grade tubes 20mm dia bore with all fittings (Such as bends, elbow, tees, short pieces, connector, cap, plug and union) and fixed to wall, floor with clip, wall hook, saddles etc. complete all as specified and as directed. |
| 73 | S&F galvanised mild steel medium grade tubes 40mm dia bore with all fittings (Such as bends, elbow, tees, short pieces, connector, cap, plug and union) and fixed to wall, floor with clip, wall hook, saddles etc.complete all as specified and as directed. |
| 74 | S&F gun metal, globe or gate valve 20mm with iron wheel head, screwed both ends for iron pipe and fixed to 20 mm bore of pipe, in repairs, complete all as specified and as directed.. |
| 75 | S&F gun metal, globe or gate valve 40mm with iron wheel head, screwed both ends for iron pipe and fixed to 40 mm bore of pipe, in repairs, complete all as specified and as directed. |
| 76 | S&F ball brass valve of size 20mm, high pressure, with polythene float and flynut, screwed both ends for iron pipe or brass ferrule and fixed to 20mm bore pipe, in repairs, complete all as specified and as directed. |
| 77 | M&L for valve pit chamber of size 600x600x400 mm (Internal Dimension) with block masonry including all necessary excavation and earth work in any type of soil, returning filling and disposal of spoil to a distance .exc 50m and depositing where directed, PCC in foundation of the mix (1:4:8) type D-2 ( Using 40mm graded stone crushed stone aggregate) brick masonry 15 mm thick plaster work in CM (1:4) over all internal and external wall with white wash of both surface and MS sheet cover of suitable thickness for with hinges, equal angle iron frame and necessary locking arrangement painting of synthetic Enamel paint over coat of red oxide primer on MS Platecomplete all as specified and as directed. |
| 78 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surface of walls, floors, etc.complete all as specified and as directed. |
| 79 | M&L for point wiring (concealed type) with 1.5 sq.mm, PVC insulated unsheathed (FRLSH), 1100 volts grade, ,single core, multi-stranded copper conductor,and continuous earth wire unsheathed (FRLSH), single core multistranded copper conductor cable of size 1.5 sq.mm earth continuity conductor conforming to relevant IS, connected to common earth dolly,colour coding of wire shall be red wires for phases, black wire for neutral and green wire for earth, drawn in and including rigid non-metallic PVC medium duty conduit (ISI mark) of size not less than 20 mm dia including concealed conduit wiring with all fittings and accessories including concealed modular type metal flush box, along with cover plate & frame suitable for fixing modular switches/ sockets , Fan regulator etc and making good the disturbed surfaces to match the existing surfaces complete all as specified and as directed for following items:-One light/Fan point controlled by one 1-way switch 6 Amps 240 volts complete all as specified and as directed. |
| 80 | Ditto all as per item No 79 above but one 3 pin socket outlet, 5/6 Amps, independent complete all as specified and as directed. |
| 81 | Ditto all as per item No 79 above but one 3 pin socket outlet, 5/6 Amps on the same board with other switches complete all as specified and as directed. |
| 82 | Ditto all as per item No 79 above but one bell/ buzzer point controlled by one push button on independent board with cables 1.5 sq.mm size complete all as specified and as directed. |
| 83 | Ditto all as per item No. 79 above but for one modular socket point 15 Amps with 2.5 sq.mm PVC insulated unsheathed (FRLSH), 1100 volts grade, ,single core,multistranded copper conductor,and continuous earth wire unsheathed (FRLSH) ,single core multi-stranded copper conductor cable of size 2.5 sq.mm earth continuity conductor conforming, to relevant IS, connected to common earth dolly complete all as specified and as directed.Note for Sl Item NO. 79 to 83 above : (i) Cutting in chases and pointing in brick wall/Stone Wall will be done by contractor without any extra cost. (ii) Making good of disturbed surfaces matching with existing finishes will be done by contractor without any extra cost |
| 84 | S&F modular switch 6 Amps one way one module complete all as specified and as directed. |
| 85 | S&F modular Socket, 6A - 2/3 pin combined 2 module complete all as specified and as directed. |
| 86 | S&F Modular switch 1 way 16A, 1module complete all as specified and as directed. |
| 87 | S&F Modular socket 6/16A, 2/3 pin combined 2 module complete all as specified and as directed. |
| 88 | S&F modular bell push, 6A, 1 module complete all as specified and as directed. |
| 89 | S&F modular Fan step regulator, 120W - 2 module complete all as specified and as directed. |
| 90 | S&F Call bell ding dong AC 230Volts, single pole complete all as specified and as directed. |
| 91 | S&F Modular RJ 11 Tel Jack single with shutter , 1module complete all as specified and as directed. |
| 92 | S&F Modular TV Socket Outlet , 1module complete all as specified and as directed. |
| 93 | S&F ceiling rose surface shall comply with IS :371-1979 Bakelite 60x 25 mm two to three terminals plates and of outside diameter not less than 63.5mm complete all as specified and as directed. |
| 94 | S&F in replacement of LED tube light fittings 20W , 220V, AC decorative box type with driver , holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. |
| 95 | S&F in replacement of recess 12 watt,230V surface mounted LED down light with white powder coated polycarbonate housing and pressure die-cast heat sink having high efficiency, including connecting up with twin core twisted flexible copper conductor cable from ceiling rose complete all as specified and as directed. |
| 96 | S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed. |
| 97 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50Hz RPM 1200, Copper winding of sweep 250mm complete all as specified and as directed. |
| 98 | Taking down the Geyser any capacity carefully including dismantling inner jacket ,descaling and cleaning , painting and re installing at existing location complete all as specified and as directed. |
| 99 | S&F vertical mounting, 5 Star Rating type electric water heater, inner body made out ofEnamel Glassline coating Steel tank of capacity 25 Litres suitable for 230 volts , single phase AC 50 HZ,Power - 2000 Watt. + 5% - 10%, Max. Thermostat Temp. 75 ± 5 % Deg. C,Outer body PPGI sheet to IS:2082 (Part /1993) (reaffirmed 2004) with latest amendments and having BEE Star (5 Star Rating) Warranty - 2 year on product, 3 year on Heating Element and 7 yrs on Tank complete including grouting with nut bolts/fasteners of suitable size complete all as specified and as directed. |
| 100 | S&F sheet metal Enclosure Single pole and neutral with a two pin and earth plug and socket complete with one single pole MCB 20 Amps,240 Volts complete with all accessories etc complete all as specified and as directed. |
| 101 | S&F 304 grade Stainless Steel connection pipe for Geyser (cold water and hot water application) complete all as specified and as directed. |
| 102 | Taking down unserviceable sub main wiring of any type and size with teak wood battens/Casing capping/PVC Conduit/ and making good disturbed surface complete all as specified and as directed. |
| 103 | M&L for cutting chases for concealed sub main wiring, pinning in and making good to surface where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., cutting not exc 10 cm girth including 3 mm thick wall care putty on wall, making surface matching to adjacent surface complete all as specified and as directed. |
| 104 | M&L for sub main wiring with two single core PVC insulated FRLS cables with stranded copper conductors 6 Sqmm , 1100 Volts grade in and including concealed conduit wiring , Non metallic rigid PVC conduit ISI marked not less than 20 mm with all fitting & other accessories and copper cable 6sqmm continuous earth wire complete all as specified and as directed. (Two runs of 06 Sqmm cable with 01run of 06Sqmm earth wire along with casing caping shall be measured as one RM) |
| 105 | M&L for sub main wiring with two single core PVC insulated FRLSH cables with stranded copper conductors 4 Sqmm , 1100 Volts grade in and including concealed conduit wiring , Non metallic rigid PVC conduit ISI marked not less than 20 mm with all fitting & other accessories and copper cable 4sqmm continuous earth wire complete all as specified and as directed. (Two runs of 04 Sqmm cable with 01run of 04Sqmm earth wire along with casing caping shall be measured as one RM) |
| 106 | M&L for sub main wiring with two single core PVC insulated FRLSH cables with stranded copper conductors 2.5 Sqmm , 1100 Volts grade in and including concealed conduit wiring , Non metallic rigid PVC conduit ISI marked not less than 20 mm with all fitting & other accessories and copper cable 2.5sqmm continuous earth wire complete all as specified and as directed. (Two runs of 2.5 Sqmm cable with 01run of 2.5 Sqmm earth wire along with casing caping shall be measured as one RM) |
| 107 | S*F of PVC conduit pipe for Telephone cable,TV & LAN cable complete all as specified and as directed. Note 1-TV,LAN, Telephone Cable provided by user.2- Cutting chases includes in item no 96. |
| 108 | S&F MCB DB 8 way SPN double door sheet metal enclosure factory made suitable for MCB DB's 240 volts with 200 amp rated busbar, neutral & earthing link bar,surface mounting complete including taking down the existing DB of any type & size alongwith its accessories by removing from existing circuits and refixing the new DBs and circuits complete all as specified and as directed. |
| 109 | S&F MCB DB 2 way SPN Single door sheet metal enclosure factory made suitable for MCB DB's 240 volts with 200 amp rated busbar, neutral & earthing link bar,surface mounting complete including taking down the existing DB of any type & size alongwith its accessories by removing from existing circuits and refixing the new DBs and circuits complete all as specified and as directed. |
| 110 | S&F in replacement of MCB SP 6 to 32 Amps 240V,10 KA breaking capacity , B curve with connection testing and commissioning complete all as specified and as directed. |
| 111 | S&F in replacement of MCB SPN 40 to 63Amp 240V,10 KA breaking capacity , B curve with connection testing and commissioning complete all as specified and as directed. |
| 112 | S&F in replacement factory made epoxy powder coated Distribution Board TP & N double door 4 way (VTPN MCCB DB )MCCB as In comer, with metal door (IP-43 protection) fabricated from CRCA sheet and fixed semi flush to wall and suitable for universal mounting and including 200 Amp copper busbar, neutral bar, standard DIN rail, Earth brand cable ties for cable management, top and bottom removable gland plates with Knockout semi flush to wall and making good disturbed surface and touch up with the same finishes complete all as specified and as directed. Note:MCBs/ MCCBs will be measured and paid separately under respective Sch A item in the schedule. |
| 113 | S&F in replacement of MCCB with rating of 160 Amps,415Volts 3 pole with 36kA breaking capacity, thermal magnetic adjustable of overload & short circuit release as per IS-13947 & IEC 60947-2 & the service short circuit breaking capacity (Ics) should be equal to ultimate breaking capacity(lcu).MCCB should be with suitable spreaders and phase barriers for each terminals complete all as specified and as directed. |
| 114 | S&F electrical meter box compartmentalized design suitable for 11 x Single phase energy meters ,and 11 MCB SP 32A outdoor type surface wall mounted type, weather proof fabricated out of not less than 2.0 mm thick CRCA sheet, powder coated in siemens grey colour, double door for fixing of existing electrical meter and proposed MCB .. The enclosure shall be front openable with locking arrangement and provided with 5 mm thick bakellite sheet for mounting the energy meter and MCB( if required) . The enclosure shall be provided with suitable size PVC cable glands for incoming and outgoing cables/wires complete all as specified and as directed. (Note- MCB will be measured under relevant item) |
| 115 | M&L in repairs earthing complete with galvanised steel earth plate electrode 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised steel earthing lead wire 4.0 mm dia by means of bolts, nut & checknuts and washers etc,. GI pipe 15 mm dia medium grade pipe for protection of GI earth lead wire, both to be provided to the extend of 7.5mtrs all as shown on electrical plate no-3 of MES SSR-2009 part -I other end connected in electrical main switch board (Inside/outside the building ) including GI protection pipe buried in ground laid under floors/pinths of fixed on walls or concealed in walls etc. with provision of mixture of charcoal dust & common salt packed upto minimum 150mm all around the earth plate , including PCC 1:2:4 type B1 earth pit with MS angle Iro frame, castiron cover with locking arrangement including necessary excavation and earth work in any type of soil/ strata & testing on completion including fillup the earth pit with soil for best result and removal of excavated material from the site complete all as specified and as directed. Note: Earth protection pipe & earthing lead wire upto and including 7.5mtr length is deemed to be include in the rate quoted by the contractor.: |
| 116 | Taking down existing service connection of any type and any size complete with all accessories complete all as specified and as directed. |
| 117 | Supply & Laying, jointing & testing of UG LT cables XLPE insulated, PVC sheathed aluminium conductor multi stranded armoured heavy duty 1100 Volt grade cross sectional area 95 sqmm 3.5 core laid in trenches/ ducts/ along poles/through pipe under road etc with new aluminium lugs of cable size complete all as specified and as directed. |
| 118 | Excavation in trenches in any type of soil n.exc 1.5 M wide and not exceeding 1.5 mts in depth in wide for laying of cables and n exc 1.5 mtr in depth and getting out incl dressing/trimming sides and levelling/ grading and ramming of bottom of excavation complete all as specified and as directed. |
| 119 | Returning, filing in incl spreading, levelling watering and well ramming excavated soil in layers not exceeding 25 cm thick each, filling back in trenches after cables have been laid and tested complete all as specified and as directed. |
| 120 | Removing excavated surplus soil obtained from excavation to a distance not exceeding 1.5 m above the starting point, complete all as specified and as directed. |
| 121 | Supply and laying 40 mm outer dia, double walled corrugated (DWC) HDPE duct pipe confirming to IS-16205 pt-24 with antirodent and non flame propogating properties of approved colour complete with fittings i.e coupler, Tee, elbow clamp for cable protection complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 122 | Supply and laying 40 mm outer dia, double walled corrugated (DWC) HDPE duct pipe confirming to IS-16205 pt-24 with antirodent and non flame propogating properties of approved colour complete with fittings i.e coupler, Tee, elbow clamp for cable protection complete all as specified and as directed. Please Enable Macros to View BoQ information |
