Tender For Balance Works Of Construction Of Permanent Office Building At Left Bank, Nbps Colony, Alchi, Leh, Ut-Ladakh., Leh-Ladakh

TDR : 55312279

Tender Notice
Corrigendum Details
BOQ

8 Days Left

Leh , Ladakh

Tender Brief : Corrigendum : Tender For Balance Works Of Construction Of Permanent Office Building At Left Bank, Nbps Colony, Alchi, Leh, Ut-Ladakh.

Document Fees
₹ 1770 /-

EMD
₹ 959000.0 /-

Tender Value
₹ 4.79 Crore /-

Submission Date
26-06-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Sr No	Corrigendum Date	Corrigendum	Type	New Submission Date
1	11-06-2026	Corrigendum-III	Date	26-06-2026
2	23-05-2026	Corrigendum_II	Date	06-06-2026
3	23-05-2026	Corrigendum_II	Date	06-06-2026
4	22-05-2026	Bid Auto Extn Corrigendum	Bid Auto Extn Corrigendum	29-05-2026
5	22-05-2026	Bid Auto Extn Corrigendum	Bid Auto Extn Corrigendum	29-05-2026

Name of Work:- Balance works of Construction of Permanent office building at Left bank, NBPS Colony, Alchi, Leh, UT-Ladakh.

Sl. No.	Item Description
1	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQProviding and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-All work upto Plinth level. 1:4:8 (1 Cement: 4 Coarse Sand: 8 graded stone aggregate 40 mm nominal size).(B) Nallah.
2	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQProviding and fixing at or near ground level precast cement concrete in kerbs, edging, etc. as per approved pattern and setting in position with cement mortar 1:3(1 cement : 3 coarse sand), cost of required centering, shuttering and complete 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size).
3	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQCentering and shuttering including stuttering, propping etc and removal of form for : Centering and shuttering including stuttering, propping etc and removal of form for :Wall (any thickness) including attached plasters, buttresses plinth and string courses etc.
4	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQCentering and shuttering including stuttering, propping etc and removal of form for : Centering and shuttering including stuttering, propping etc and removal of form for : Lintels, Beam, Plinth Beam, Girder, Bressumers and cantilevers.
5	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQCentering and shuttering including stuttering, propping etc and removal of form for : Centering and shuttering including stuttering, propping etc and removal of form for : Suspended floors, roofs, landing, balconies and access platform.
6	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQReinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 degree landings, balconies, shelves, chhajja, lintels, bands, plain windows sills, staircases and spiral stair cases etc upto floor five level excluding the cost of shuttering, finishing and reinforecement. 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size)
7	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQReinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete.Thermo-Mechanically Treated bars of grade Fe-500D or more
8	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQProviding wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with holdfast lugs or with dash fasteners of required dia & length (holdfast lugs or dash fastener shall be paid for separately). Second class Kail wood.
9	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQProviding and Fixing ISI marked flush door shutters decorative veneering type, core of block constructed with frame of 1 st class hard wood and well natched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters : 35 mm thick including ISI marked anodised aluminium butt hinges with necessary screws
10	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQProviding and Fixing glazed shutter for Doors, Windows and clerestory windows using 10 kg/Sqm (4mm thick) glass panes incl. black enameled ISI mark MS butt hinges with necessary screws. Kiln seasoned and chemically treated hollock wood 30mm thick
11	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQ6mm cement plaster of mix 1:3 ( 1 cement: 3 fine sand)
12	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQProviding and fixing 1st, quality ceramic glazed tiles conforming to IS 13753 of minimum thickness 5 mm of appd make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in colour, shade except begundy, bottle, green, black of any size as approved by EIC in skirting, risers of steps and dados over 12 mm th bed of cement mortar 1:3 (1cement: 3coarse sand) and jointing with gray cement slurry @ 3.3kg/sqm including pouinting in white cement mixed with pigment of matching shade complete.
13	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQProviding and fixing 1st, quality ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS 13755 of NITCO, ORIENT. SOMANY KAJARIA, or equivalent make in colour such as white, irony, Grey, Fume Red, Brown laid on 20mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) including pouinting the joints with white cement and matching pigment etc, complete.
14	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQProviding and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacture) with water absorption less than 0.08% and conforming to IS:15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement: 4 coarse sand) including grouting the joints with white cement and matching pigment etc all complete.Size of tiles 600x600mm
15	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQTile work in skirting, riser of steps and dado (up to 2m height) over 12mm thick bed of concrete mortar 1:3 (1 cement : 3 coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm including pointing in white cement mixed with pigment of matching shade complete. Marble tiles (polished Rajnagar. 8mm thick)
16	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQProviding and fixing stainless steel grade 304 railing made of hollow tubes channels plates, etc. including welding, grinding, buffing polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories and stainless steel dash fasteners stainless steel bolts etc of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of EIC (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts bolts fasterners etc.
17	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQSteel work welded in built up sections / framed work includng cutting, hoisting, fixing in position and applying a priming coat of approved steel primerusing structural steel etc. as required.In gratings, frames, guard bar, ladders, railings, brackets, gates & similar works.
18	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQProviding and fixing soil, waste and vent pipes. a) 100 mm dia Centrifugally cast (spun) Iron S&S pipe.as per IS 3989
19	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQProviding and fixing soil, waste and vent pipes. a) 75 mm dia Centrifugally cast (spun) Iron S&S pipe.as per IS 3989
20	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQProviding and fixing plain bend of required degree 100mm dia centrifugually cast (spun) iron S&S as per IS 3989
21	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQProviding and fixing trap of self cleansing design with screwed down or hinged grating with or without vent are complete including cost of cutting and making good the walls and floors 100mm inlet and 75mm outlet sand cast iron S&S as per IS : 1729
22	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQProviding & fixing white viterous china pedestal type water closet ( European type W.C pan) with seat and lid 10 liters low level white PVC flushing cistern including flush pipe with manually control device (handle lever) confirming to IS: 7231 with all fittings and fixtures complete including cutting and making good the wall and floor wherever required WC pan with ISI marked white solid plastic seat and lid
23	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQProviding and fixing CP brass bib cock of approved quality confirming to IS 8931, 15 mm nominal bore.
24	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQProviding and fixing PTMT Angle stop cock 15mm nominal bore, weighting not less than 85 gram.
25	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQProviding and fixing PTMT pillar cock of approved quality and colour 15mm nominal bore,107mm long, weighting not less than 110 gram.
26	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQProviding and fixing CP brass long nose bib cock of approved quality confirming to IS standard and weighting not less than 810 gram, 15 mm nominal bore.
27	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQProviding and Fixing Toilet paper holder: CP brass
28	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQProviding and fixing the joints with spun yarn cement slurry and cement mortar 1:2 (1cement : 2 fine sand) in S. C. I. / C. I. pipes: 100mm dia pipes
29	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQProviding and fixing the joints with spun yarn cement slurry and cement mortar 1:2 (1cement : 2 fine sand) in S. C. I. / C. I. pipes: 75mm dia pipes
30	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQProviding and laying and jointing glazed stoneware pipes grade A with stiff mixture of cement mortar in the proportion 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete. 200mm diameter
31	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQProviding and laying and jointing glazed stoneware pipes grade A with stiff mixture of cement mortar in the proportion 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete. 150mm diameter
32	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQProviding and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40mm nominal size ) all round S. W. pipes including bed concrete as per standard design 200mm diameter S. W. Pipe a) Crushed
33	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQProviding and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40mm nominal size ) all round S. W. pipes including bed concrete as per standard design 150mm diameter S. W. Pipe a) Crushed
34	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQProviding and fixing PTMT soap dish holder having length of 138mm, breath 102mm, height of 75mm with concealed fitting arrangements, weighting not less than 106 gms.
35	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQProviding and fixing 600x450mm bevelled edge mirror of superior class (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleat with C. P. brass screw and washer complete.
36	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQProviding and fixing 600x120x5 mm glass shelf with edges round of supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40mm long screws, rawl plugs etc. complete.
37	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQProviding and placing on terrace (at all floor levels) polyethylene water storage tank ISI:12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
38	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQProviding and fixing bright finished brass handles with necessary screws etc. complete: 125mm
39	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQProviding and fixing bright finished brass handles with necessary screws etc. complete: 100mm
40	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQProviding and fixing PTMT Towel ring trapezoidal shape 215mm long 200mm wide with a minimum distance of 37 mm from wall face with concealed fittings arrangements of approved quality and colour, weighting not less than 88 gms.
41	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQProviding and fixing bright finished brass 100 mm mortice latch and lock with 6 lever and a pair of lever handles with necessary screws etc. complete (best make of approved quality)
42	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQProviding and fixing bright finished brass tower bolts (barrel type) with necessary screw etc. complete : 250x10 mm
43	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQProviding and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour.600mm long towel rail with total length of 645 mm, 78mm wide and effective height of 88mm weighting not less than 190 gms.
44	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQProviding and supplying Spandrel Glass Panels comprising of 6 mm thick heat strengthened monolithic float glass of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade so as to match the colour and shade of the IGUs in the vision panels etc. ,all complete for the required performances as specified, as per the Architectural drawings, as per the approved shop drawings, as specified, and as directed by the Engineer- in-Charge. For payment, only the actual area of glass on face # 1 of the glass panels (but excluding the area of grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm.(Payment for fixing of Spandrel Glass Panels in the curtain glazing is included in cost of relevent Item*).(i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, having properties as visible Light transmittance (VLT) of 25 to35%, Light reflection internal 10 to 15%, light reflection external 10 to 20%, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement.
45	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQProviding and fixing soil waste and vent pipes 100mm dia sand cast iron S&S pipe as per IS 1729
46	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQProviding and fixing soil waste and vent pipes 75mm dia sand cast iron S&S pipe as per IS 1729
47	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQProviding and fixing trap of self cleaning design with screwed down or hinged grating with or without vent arm complete, including cost and making good the walls and floors: sand cast iron S&S as per IS:1729
48	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQProviding and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required: (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer
49	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQProviding and fixing collar 100mm sand cast iron S&S as per IS:1729
50	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQPainting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work.
51	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQProviding and fixing terminal guard: 100 mm sand cast iron S&S as per IS 1729
52	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQApplying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)
53	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQProviding and fixing single equal plain junction required degree with access door incertion rubber washer 3mm thick, bolts and nuts complete. 100x100x100 mm. Cast iron S&S as per IS: 1729
54	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQProviding and fixing single equal plain junction required degree with access door incertion rubber washer 3mm thick, bolts and nuts complete. 75x75x75mm. Cast iron S&S as per IS: 1729
55	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQProviding and fixing M.S.holder bat clamps of approved design to C.I. or S.C.I. rain water pipes embedded in and including cement concrete blocks10x10x10 cm of 1:2:4 mix (1cement coarses and :4graded stone aggregate 20mm nominal size) and cost of cutting holes and making good the walls etc. : For 100mm dia pipes
56	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQProviding and fixing MS holder bat clamps of approved design to sand cast iron/cast iron (spun) pipe embeded in and including cement concrete blocks 10x10x10 cm of 1:2:4 (1cement :2 coarse sand :4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the wall etc. For 100 mm dia pipes
57	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQConstructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III): 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size),inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
58	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQExtra for depth for manholes size 90cmx80cm. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
59	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQProviding and fixing square mouth SW Gulley trap Grade A complete with CI brick masonary chamber with water tight CI cover with frame of 300x300 mm size (inside ) the weight of cover to be not less than 4.5 kg and frame to not less than 2.7 kg as per standard design. 150x100 mm size P type. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
60	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQProviding and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes SDR 7.4 UV stabilized and anti microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threated popy propylene random fittings incl. trenching, refilling and testing of joints complete as per direction of EIC (External work) PN 10 pipe, 75mm OD (SDR-11)
61	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQProviding and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes SDR 7.4 UV stabilized and anti microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threated popy propylene random fittings I/C trenching, refilling and testing of joints complete as per direction of EIC (External work) PN 10 pipe, 63mm OD (SDR-11)
62	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQProviding and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes SDR 7.4 UV stabilized and anti microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threated popy propylene random fittings I/C trenching, refilling and testing of joints complete as per direction of EIC (External work) PN 16 pipe, 32mm OD (SDR-7.4)
63	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQProviding and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes SDR 7.4 UV stabilized and anti microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threated popy propylene random fittings I/C trenching, refilling and testing of joints complete as per direction of EIC (External work) PN 16 pipe, 20mm OD (SDR-7.4)
64	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQProviding and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge.
65	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQProviding and fixing Stainless Steel AISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40mm including painting of fittings and brackets, cutting and making good the walls wherever required.610x460mm bowl depth 200mm
66	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQProviding and fixing wire guage shutters using galvanised MS wire guage of average width for aperture 1.4 mm in both direction with wire of dia 0.63mm for doors, windows and clerestory windows with hinges and necessary screw: 35 mm thick shutters Second class kail wood. Second class kail wood
67	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQProviding and fixing traditionally carved wood work (Shingstak) over doors and windows including all accessories as per the direction of the Engineer in-charge complete with: 2nd class kail wood
68	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQProviding 40x5mm flat iron hold fast 40cm long including fixing to frame with 10mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size)
69	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQProviding and laying gang saw cut 18 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement : 5 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge. With granite stone of area less than 0.50 sqm
70	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQExtra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete.
71	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQKota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick
72	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQRough cast plaster upto 10 m height above ground level with a mixture of sand and gravel or crushed stone from 6 mm to 10 mm nominal size, dashed over and including the fresh plaster in two layers, under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand) and top layer 10 mm cement plaster 1:3 (1 cement : 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement. Ordinary cement finish using ordinary cement
73	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQExtra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
74	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQProviding and fixing bend of required degree with access door, insertion rubber washer 3mm thick bolts and nuts complete. 100mm dia sand cast iron S&S as per IS:1729
75	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQProviding and fixing bend of required degree with access door, insertion rubber washer 3mm thick bolts and nuts complete. 75mm dia sand cast iron S&S as per IS:1729
76	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQProviding and fixing plain bend of required degree.100mm dia Sand cast iron iron S&S as per IS : 1729
77	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQProviding and fixing plain bend of required degree. 75mm dia Sand cast iron iron S&S as per IS : 1729
78	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQProviding and fixing CP Stop cock (Concealed) of standard design and of approved make conforming to IS: 893. 15 mm nominal bore.
79	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQProviding and fixing CP brass Angle valve for basin mixer and gyser points of approved make confirming to IS: 8931. 15 mm nominal bore.
80	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQProviding and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete
81	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQWall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats
82	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQProviding and fixing unplasisized PVC Connection pipe with PTMT nuts of approved quality, colour. 15mm nominal bore with 45cm length
83	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQProviding and fixing chromium plated brass casement window fastener with necessary screw complete
84	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQProviding and fixing bright finished brass hanging type floor door stopper with necessary screws etc. complete
85	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQSteel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes
86	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQProviding & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 2 mm thick corrugated (2.5\\" or 4.2\\" or 6\\") or step-down (2\\" or 3\\" or 6\\" ) as specified.
87	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQProviding and fixing UV stabilised fiberglass reinforced plastic sheet roofing upto any pitch including fixing with polymer coated 'J' or 'L' hooks, bolts, bolts and nuts 8 mm dia. G.I. plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc.. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% Ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall confirm to IS : 10192 and IS : 12866. The sheets shall be opaque or transparent, clear or pigmented, textured of smooth as specified: 2 mm thick flat
88	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQExtra for providing and fixing wind ties of 40x6mm flat iron section for Non AC roofing
89	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQPolishing on wood work with ready mixed wax polish of approved brand and manufacture. New work.
90	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQProviding and fixing in wall lining flat pressed 3layers (medium density) particle board or graded wood prelaminated one side decorative lamination other side balancing lamination grade-1, type-II, IS:12823 marked including priming coat on exposed surface, with necessary fixing arrangement and screw etc complete. 12mm thick
91	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQProviding and fixing glazing in aluminium Doors, Window ventilator shutters and partition etc with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of EIC (cost af aluminium snap beading shall be paid in basic item.) With float glass of 8mm thickness.
92	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQProviding and fixing prelaminated wooden flooring of reputed make in required size, shape, colour, texture and finish etc. tongued and grooved over existing floor, complete in all respect as per instruction of Engineer-in-charge.
93	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQExtra for providing frosted glass panes 4mm thick instead of ordinary floor glass panes in doors, windows, clearstory windows shutters (Area of opening for glass panes excluding portion inside riveted shall be measured).
94	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQExcavating trenches of required width for pipes, cables etc. including excavation of for sockets and dressing of sides, ramming of bottoms depth up to 1.50m including getting out the excavated soil and then retuning the soil is required, in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering etc. and disposal of surplus executed soil as directed, within a lead of 50m in all kinds of soil. pipes, cable etc. exceeding 80mm dia but not exceeding 300mm dia
95	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQProviding and fixing in position Collapsible steel shutters with vertical channels 20x10x2 and braced with flat iron diagonals 20x5 mm size with top and bottom rail of T-iron 40x40x6 mm 40 mm dia, steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coats of approved steel primer.
96	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQProviding and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.
97	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQProviding and fixing aluminium works for doors, windows, ventilators and partition with extruded builtup standard tubular section/ appropriate Z-sections and other sections of approved make confirming to IS: 733 and IS: 1285, fixed with dash fasteners of required dia and size including necessary fillings up of gapes at junctions i. e. at top, bottom and sizes with required EPDM rubber / newprint gascate felt etc. Aluminium section shall be smooth, rust free, straight mitried and jointed mechanically where ever required including cleat angle, aluminium snap beading for glazing/ paneling, CP brass/stainless steel screws or complete as per architectural drawings and the direction of EIC (Glazing and paneling to be paid for separately). For fixed portion. Powder coated alumunium (Minimum thickness of powder coated 50 microns)
98	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQProviding and fixing 12mm thick prelaminated particle board flat pressed 3 layer or graded wood particle board (Confirming to IS: 12823 grade I Type-II) in panelling fixed in alumunium doors, windows, shutters and partitions frames with CP brass/ Stainless Screws etc. as per architecturel drawings and the direction of EIC Prelaminated particle board with decorative lamination on one side and balancing lamination on other side.
99	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQProviding and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge with stainless steel cover plate.
100	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQProviding and fixing aluminium round handle of outter dia 100 mm with SS screws etc. complete as per the direction of EIC. Powder coated minimum thickness 50 micron aluminium.
101	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQEarth work in excavation by manual means over areas (Exceeding 30 cm in depth 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead of 50 mtr and lift upto 1.50 m, as directed by EIC: All kinds of soil.
102	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQ12mm cement plaster finished with a floating coat of neat cement of mix 1:4 ( 1 cement: 4 fine sand)
103	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQReinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand (zone III) : 3 graded stone aggregate 20 mm nominal size)
104	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQProviding and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)
105	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQProviding M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design: With 20x20 mm square bar
106	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQSupplying and fixing C.I. cover without frame for manholes : 455x610 mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg
107	PART - A- BALANCE CIVIL ITEMS AS PER ORIGINAL BOQRandom rubble masonry with hard stone in foundation andplinth including levelling up with cemented Concrete1:6:12 (1cement :6 coarse sand:12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand)
108	PART-B : NEW CIVIL ITEMSProviding and fixing G.I. Pipes complete with G.I. fittings incl. trenching and refilling etc. (External work): 50 mm dia nominal bore
109	PART-B : NEW CIVIL ITEMSProviding and fixing G.I. Pipes complete with G.I. fittings incl. trenching and refilling etc. (External work): 25 mm dia nominal bore
110	PART-B : NEW CIVIL ITEMSProviding and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-incharge. (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.50 mm thickness (weight not less than 12.50 kg/sqm)
111	PART-B : NEW CIVIL ITEMSProviding and fixing 4mm Thick ACP (Aluminium Composite Panel) of approved make or brand, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer in-charge. 4mm Thick ACP (Aluminium Composite Panel)
112	PART-B : NEW CIVIL ITEMSProviding & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hotcured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and S12866.Thesheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 2 mm thick flat
113	PART-B : NEW CIVIL ITEMSProviding and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS :1868 ) transparent or dyed to required colour or shade, with necessary screwsetc.complete : 250x10 mm
114	PART-B : NEW CIVIL ITEMSProviding and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete: 125 mm
115	PART-B : NEW CIVIL ITEMSProviding and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete: 250x16 mm
116	PART-B : NEW CIVIL ITEMSProviding and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
117	PART-B : NEW CIVIL ITEMSProviding and fixing in walls wooden panelling 8mm thick (minimum) of reputed make in required size, shape, colour, texture and finish etc. tongued and grooved over existing surface, complete in all respect as per instruction of Engineer-in-charge.
118	PART-B : NEW CIVIL ITEMSProviding wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc. Kiln seasoned and chemically treated hollock wood
119	PART-B : NEW CIVIL ITEMSProviding and fixing false ceiling at all heightincluding providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with Tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks).
120	PART-C -INTERNAL ELECTRIFICATION WORKS:Wiring For light point /fan point /exhaust point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in existing surface/ recessed medium class PVC conduit, with modular switch, modular plate, suitable size GI Box and earthing the point with 1.5 sq.mm FR PVC insulated copper conductor single core cable etc. as required. Group B
121	PART-C -INTERNAL ELECTRIFICATION WORKS:Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection, etc. as required.
122	PART-C -INTERNAL ELECTRIFICATION WORKS:Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 modular socket outlet and 5/6 amps modular switch, connection, etc. as required.
123	PART-C -INTERNAL ELECTRIFICATION WORKS:Supplying and fixing call bell / buzzer suitable for single phase, 230 volts complete as required.
124	PART-C -INTERNAL ELECTRIFICATION WORKS:Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board , 240 volts on surface/recess, complete with tinned copper busbar, neutral busbar, earth bar, din bar, interconnections, powder painted including earthing etc. as required.(But without MCB /RCCB/ Isolator.) 2+6 way/ 8 way Double door
125	PART-C -INTERNAL ELECTRIFICATION WORKS:Supplying and fixing of 5 amps. to 32 amps ratting, 240 volts ' C' Curve miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required:Single pole
126	PART-C -INTERNAL ELECTRIFICATION WORKS:Supplying and fixing of 5 amps. to 32 amps ratting, 240 volts ' C' Curve miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required:Double pole
127	PART-C -INTERNAL ELECTRIFICATION WORKS:Supplying & Fixing of following rating, double pole, (Singe Pole and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300mA in the existing MCB DB complete with connection, testing and commissioning etc. as required:63 amps
128	PART-C -INTERNAL ELECTRIFICATION WORKS:Supplying and fixing of following modular size/modules, GI box along with modular base & cover plate for modular switch in recess etc as required:1or 2 module (75mm X 75 mm)
129	PART-C -INTERNAL ELECTRIFICATION WORKS:Supplying and fixing of following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc as required:Telephone socket outlet
130	PART-C -INTERNAL ELECTRIFICATION WORKS:Wiring for light/power plug with 2X4 sq.mm FR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 no. 4 sq.mm FR PVC insulated copper conductor single core cable for loop earthing as required.
131	PART-C -INTERNAL ELECTRIFICATION WORKS:Wiring for Circuit/Submain wiring along with earth wire the following sizes of FR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit as required:2X2.5 Sqmm+ 1X2.5 Sq.mm earth wire
132	PART-C -INTERNAL ELECTRIFICATION WORKS:Wiring for Circuit/Submain wiring along with earth wire the following sizes of FR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit as required:2X10 Sqmm+ 1X6 Sq.mm earth wire
133	PART-C -INTERNAL ELECTRIFICATION WORKS:Supply and drawing following pair 0.5 sq.mm FR PVC insulated annealed copper conductor, unarmoured telephone cable in the existing surface/ recessed steel/ PVC conduit as required:2 Pair
134	PART-C -INTERNAL ELECTRIFICATION WORKS:Supply and drawing following pair 0.5 sq.mm FR PVC insulated annealed copper conductor, unarmoured telephone cable in the existing surface/ recessed steel/ PVC conduit as required:4 Pair
135	PART-C -INTERNAL ELECTRIFICATION WORKS:Earthing with G.I.earthing plate 600mm X 600mm X 6mm thick including accessories and providing masonary enclosure with cover plate having locking arrangment and watering pipe of 2.7 Mtrs. long etc.with charcoal / coke and salt as required.
136	PART-C -INTERNAL ELECTRIFICATION WORKS:Supplying and laying 25mm X 5 mm G.I strip at 0.5 m Below ground as strip earth electrode including connection/ termination with GI nut, bolt spring, washer etc.as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
137	PART-C -INTERNAL ELECTRIFICATION WORKS:Providing and fixing of 25mm X 5 mm G.I strip on surface or in recesses for connections etc. as required.
138	PART-C -INTERNAL ELECTRIFICATION WORKS:Providing and fixing 25mmx 5mm G.I. strip in 40mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling as required.
139	PART-C -INTERNAL ELECTRIFICATION WORKS:Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, GI tube, having single prong at top with 85 mm dia. 6 mm thick GI base plate including holes etc. complete as required.
140	PART-C -INTERNAL ELECTRIFICATION WORKS:Providing and fixing of G.I strip/ tape 20mm X 3 mm thick on parapet or surface of wall for lightning conductor as required. (For Horizontal run)
141	PART-C -INTERNAL ELECTRIFICATION WORKS:Providing and fixing of G.I strip/ tape 20mm X 3 mm thick on parapet or surface of wall for lightning conductor as required. (For Vertical run)
142	PART-C -INTERNAL ELECTRIFICATION WORKS:Supplying and drawing following sizes of FR PVC insulated copper conductor, single core cable in the existing surface/recessed steel /PVC conduit as required. (Wiring for fire alarm system) 2 X1.5 sq.mm
143	PART-D : NEW ELECTRICAL ITEMS:Smart wireless Addressable Fire Alarm Panel with 150 wireless addressable zone. 16 notification alarm circuit (NAC).Flexible zone and NAC grouping.3.25 inch or more and 12864 graphic multiline LCD display LED status indicators.1 wired siren support, Supports MCP, smoke detectors, supervisory sensors and gas detectors, Supervisory special function can convert supervision primary alarm with specified delay, 24 hours battery backup standard, Optional battery backup can be extended to 48 and 72 hours.Cloud notification service via App. Usage multiple encryption for communication- AES-256, RSA-2048 and SSL. MS body. Supports control server. On panel command buttons with password protection. Supports control server. Follow US NFPA-72, 10th edition specification. RF range: 80 meter ( No obstacle) Supports sensor control module (SCM).Inbuilt WiFi and GSM module, CE, ROHS, ISO certification. STQC certified. Cloud notification service via App.Operating temperature -30degree C to +55 degree C and system designed for low temperatures and high altitude and along with accessories as per annexure-1 with technical specifications attached.
144	PART-D : NEW ELECTRICAL ITEMS:Installation, testing & commissioning of smart wireless addressable fire detection & alarm system for admin. building, Nimoo Bazgo Power Station.
145	PART-D : NEW ELECTRICAL ITEMS:Freight Charges
146	PART-D : NEW ELECTRICAL ITEMS:ELECTRIC HEAT TRACING : Design, Supply and Installation of Self-Regulating Electric Heat Tracing with accessories(Heaters, Marshalling Boxes, Power Boxes, Supports, Fixation, thermostat etc.) and Power Distribution System (Cables of required capacities along with cable tray wherever required) and PIC/PUF Insulation material with required economic thickness and aluminium cladding on Domestic Water Supply Line of GI Pipes of various dia (from 1\\" dia to 0.5\\" dia) including valves, flanges, supports, elbows, reducers etc. & Overhead Water Tanks of different capacities. Self regulating cable Danfoss EC pipe guard 33:GI Pipe of 2 inch dia
147	PART-D : NEW ELECTRICAL ITEMS:ELECTRIC HEAT TRACING : Design, Supply and Installation of Self-Regulating Electric Heat Tracing with accessories(Heaters, Marshalling Boxes, Power Boxes, Supports, Fixation, thermostat etc.) and Power Distribution System (Cables of required capacities along with cable tray wherever required) and PIC/PUF Insulation material with required economic thickness and aluminium cladding on Domestic Water Supply Line of GI Pipes of various dia (from 1\\" dia to 0.5\\" dia) including valves, flanges, supports, elbows, reducers etc. & Overhead Water Tanks of different capacities. Self regulating cable Danfoss EC pipe guard 33:GI Pipe of 0.5 / 0.75/ 1 inch dia
148	PART-D : NEW ELECTRICAL ITEMS:ELECTRIC HEAT TRACING : Design, Supply and Installation of Self-Regulating Electric Heat Tracing with accessories(Heaters, Marshalling Boxes, Power Boxes, Supports, Fixation, thermostat etc.) and Power Distribution System (Cables of required capacities along with cable tray wherever required) and PIC/PUF Insulation material with required economic thickness and aluminium cladding on Domestic Water Supply Line of GI Pipes of various dia (from 1\\" dia to 0.5\\" dia) including valves, flanges, supports, elbows, reducers etc. & Overhead Water Tanks of different capacities. Self regulating cable Danfoss EC pipe guard 33:Overhead Water Tanks of Capacity 1000L
149	PART-D : NEW ELECTRICAL ITEMS:Supply & Installation of Power Junction Boxes, RTD Sensor / Thermostat, End Connector, Splice Connectors etc., along with Cable Trays (both Branch & Main) for Electric Heat Tracing System
150	PART-D : NEW ELECTRICAL ITEMS:Supply and Installation of Electric Heat Tracing System Power & Control Panels
151	PART-D : NEW ELECTRICAL ITEMS:Testing & Commissioning of Electric Heat Tracing System with each Panel Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Ladakh Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Balance Works Of Construction Of Permanent Office Building At Left Bank, Nbps Colony, Alchi, Leh, Ut-Ladakh., Leh-Ladakh

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Balance Works Of Construction Of Permanent Office Building At Left Bank, Nbps Colony, Alchi, Leh, Ut-Ladakh., Leh-Ladakh

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us