|
| 1 | Taking down chowkats or frames not exc 1.5 sqm each but with shutters (without taking off shutters from the frame), all as directed. |
| 2 | Taking down chowkats or frames exc 1.5 sqm but n. exc 4 sqm each but with shutters (without taking off shutters from the frame), all as directed. |
| 3 | Taking down shutters of any description exc 1 sqm but n.exec 2 sqm each all as directed. |
| 4 | Taking down shutters of any description n exc 1 sq. m each all as directed. |
| 5 | M&L for Second class hardwood plain solid straight chowkats and frames wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints all as specified and as directed. |
| 6 | M&L for Second class hardwood glazed and skelton shutters 35mm thick, open rebated and prepared to receive glass, gauze etc with sash bar any number fitted with cut and mitered beads for securing glass gauze etc , sizes of members of shutters as specified in SSR Part I section 8, Section 8.24(a) and fitted to chowkats, all as specified and as directed. |
| 7 | Description all as per ser item No 6 above, but 30mm thick. |
| 8 | M&L for Second class hardwood rail and style plain framed panelled shutter (two panel) 35mm thick with lock rail and panel of 9mm B.W.P. commercial ply or 12mm venerered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part-I), kiln seasoned and chemically pressure treated complete, all as specified and as directed. |
| 9 | M&L for preparation of new wooden or wood based surfaces of any description, over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engr-in-Charge. |
| 10 | S&F solid PVC door frames of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification and drawing complete all as directed by Engineer-in-Charge. |
| 11 | S&F for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stilesand plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed tothe stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as directed by Engineer-in-Charge. |
| 12 | M&L for Framed work as grills with end bars shoulders/framed guard bars and similar work conforming to Fe-410 or 310 in repairs complete all as directed |
| 13 | S&F Butt Hinges medium weight cold rolled mild steel 125 mm long complete all as specified. |
| 14 | S&F Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, 100mm long complete all as specified. |
| 15 | S&F aluminum anodised barrel tower bolts of extruded section 150mm long complete all as specified and as directed. |
| 16 | S&F aluminum anodised barrel tower bolts of extruded section 100mm long complete all as specified and as directed. |
| 17 | S&F 150 mm over all length of cover plate of floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor complete all as specified and directed by Engineer-in-Charge. |
| 18 | S&F Aluminum anodised sliding door bolts of 300mm long with hasp and staple(bolt type) and fixing clips of sheets ,cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed. |
| 19 | S&F Aluminum anodised bow handle fabricated type extruded section of 150mm long complete all as directed |
| 20 | S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples to fixed with steel framed work and wooden framed work with & incl necessary items complete all as specified and directed by Engr-in-Charge. |
| 21 | S&F in repair sheet glass 4.00 mm thick ordinary quality and glazing with oil putty in square, rectangle n.exc 0.5 Sqm in each pan and including hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beadsall as specified and as directed by Engr-in-Charge. |
| 22 | S&F for sheet glass 4.0mm thick ordinary quality and glazing with oil putty in square n. exec 0.5 Sqm in each pane complete all as specified and as directed. |
| 23 | S&F in repair Harrison rails (Curtain rod//drapery rod), 20mm dia, powder coated with and including fency type PVC bracket 2 Nos of each opening and side stopper fency type powder coated of required shape and size 2 Nos of each opening complete all as specified and directed by Engr-in-Charge. |
| 24 | Supply and fixed aluminium (die cast) body door closer hydraulically regulated designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 6 to 8 kg all as specified and directed by Engr-in charge. |
| 25 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including nainital or similar roof coverings complete all as specified and directed. |
| 26 | S&F 0.63 galvanised, corrugated mild steel sheeting with two corrugation side lap fixed with J or L type hooks in roofs, walls etc. with grade of zinc coating 275 complete all as specified and directed. |
| 27 | S&F 1.00 mm thick plain galvanised,mild steel sheeting, with grade of zinc coating 275 as in ridges, hips vally gutters drip and straight flashing (length and grith as fixed) complete all as specified and directed. |
| 28 | M&L for preparing new steel surfaces of any description, over exceeding 10 cms width or girth applying two coats of synthetic enamel paint over one coat of red oxide, zinc chrome primer, all as specified. |
| 29 | S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge. |
| 30 | S&F for pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550mpa as in roof covering /cladding to wall, fixed with self tapping screws as in ridge,eaves boards, hips, velly gutter drip and straight flushing of reuired machine moulded shape and size complete all as specified and directed by Engr-in-Charge. |
| 31 | S&F 12mm thick Gypsum board fixed in anodised aluminium snap grid 605 X 605mm frame work as in false ceiling including hangers 6mm dia GI (up to 1200mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40X3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long fixed with including dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover filletscomplete all as specified and as directed. |
| 32 | S&F in repairs 2nd class softwood 15mm thick boarding as required planed one side and edges tongued and grooved or rebated for ceilings fixed with nails in any situation with and including applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by the Engr-in-Charge. |
| 33 | S&F for 6 mm veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face decorative veneer and one face plain of required texture & colour fixed with nails to timber frame work for any surface fixed in repairs complete all as specified and directed by Engr-in-Charge. |
| 34 | M&L for 25 mm thick 2nd softwood planed one side & edges tongued and grooved or rebated, and fixed with nails and including dismantling of baording any description, fixed in any position with nails including fillets complete all as specified and directed by Engr-in-Charge. |
| 35 | S&F in repair for 2nd class hardwood (wrought) in scantling for timber frame and fixed complete all as specified and directed by Engr-in-Charge. |
| 36 | M&L for second class hardwood plain fillets in square, rectangular or triangular in section, clean sawn, secured with nails or boards exc 6 Sq.cm & n.exc 13 Sq.cm with and including two coat of French polish complete all as specified and directed by Engr-in-Charge. |
| 37 | S&F 18/19 mm thick block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work as in shelves, partition, wall and lineing with and including dismantling boarding, any description , fixed in any position with nails complete all as specified and directed by Engr-in-Charge. |
| 38 | S&F 18/19 mm thick block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work as in partition wall with including dismantling wall (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover filletscomplete all as specified and as directed. |
| 39 | S&F 0.9mm thick decorative laminate type-1, of surface finish, colour and pattern as approved fixed with approved adhesive as per marker's instructions complete all as specified and directed by Engr-in-Charge. |
| 40 | M&L for taking down existing cement plaster including racking out joints, hacking for key, scrubbing down with water etc complete . |
| 41 | M & L 15 mm thick rendering on brick work or concrete surface in cement mortar 1:4, surface finished even and fair complete. |
| 42 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid, dry complete |
| 43 | M&L Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with glossy finish , approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed. |
| 44 | M & L Precast cement concrete block Type B1 1:2:4 (20 mm graded aggregate) masonry with solid blocks exc 10 cm in width and setting in mortar 1:6 complete all as directed and specified. |
| 45 | M&L for old size brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4 for walls with including demolition of brick work / PCC block masonry or stone/Boulder masonry built in cement mortor incl all quoins arches pillars etc. but excluding ashlar facings, dressed stone work and precast concrete articles all as specified and as directed by Engr-in-charge. |
| 46 | M&L rendering 15 mm thick in CM 1:6 on brick/concrete/stone wall surfaces of any description, and finishing the surfaces even and smooth without using extra cement complete with and including preparing new plastered or unplastered surfaces on walls and applying two coats of oil emulsion distemper of surface upto ture finish over a coat of water base primer complete all as specified and directed by Engr-in-Charge. |
| 47 | M&L rendering 15 mm thick in CM 1:6 on brick/concrete/stone wall surfaces of any description, and finishing the surfaces even and smooth without using extra cement complete with and including taking down cement or lime plaster of any description from stone /brick/concrete wall etc incl raking out joints hacking for key scrurbbing down with water and disposing of the rubbish and preparing new plastered or unplastered surfaces on walls and applying two coats of oil emulsion distemper of surface upto ture finish over a coat of water base primer complete all as specified and directed by Engr-in-Charge. |
| 48 | M&L rendering 15 mm thick in CM 1:4 with and including mixing of liquid WPC of approved make @ 200ml per bag of cement on brick/concrete/stone wall surfaces of any description, and finishing the surfaces even and fair complete with and including taking down cement or lime plaster or racking of pointing and scrubbing out existing finishes on wall of any for three storey bldg incl all necessary arrangement like scaffolding and masonry and preparing new plastered or unplastered surfaces and applying two coats of cement based paint over a coat of chalk whiting complete all as specified and directed by Engr-in-Charge. |
| 49 | M & L chequred cement concrete tile 30 cm x 30 cm x 20 mm thick, glossy finish, set, jointed and pointed in neat cement slurry as in floor with grey cement and pigment over and including 20 mm thick screed bed in cement mortar 1:6 including dismatling of old tiles complete all as specified and directed. |
| 50 | M & L Endura Industrial Tiles 30 cm x 30 cm x 10 mm thick, set, jointed and pointed in neat cement slurry as in floor with grey cement and pigment over and including 20 mm thick screed bed in cement mortar 1:6 including dismatling of old tiles complete all as specified and directed. |
| 51 | Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed. |
| 52 | M&L RCC 1:2:4 type B-1 using 20mm graded stone aggregate as in slab supported on wall, landings balconies, canopies, deck slabs and shelves etc complete all as specified and directed |
| 53 | M&L Non skid /anti - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 15mm thick screed bed in CM 1:6 including dismantling of tiles complete all as specified and directed by Engineer in Charge. |
| 54 | M&L non skid ceramic tiles coloured pattern as required of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including dismantling of tiles and laid over 15mm thick screed bed in CM (1:6) compete all as specified and directed by Engr-in-Charge |
| 55 | M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 15mm thick screed bed in CM 1:6 including dismantling of tiles complete all as specified and directed by Engineer in Charge. |
| 56 | Description all as per ser item No 55 above, but on vertical surfaces such as skirting over with and including 10mm thick backing coat in CM 1:4 including dismantling of tiles complete all as specified and as directed by Engr - in - charge. |
| 57 | M&L for glazed ceramic tiles coloured designer and pattern (light & dark shade combination) in vertical surface 350x250x7 or 450x350x7 or 450X 300X 7-8mm 300x 200x 7 to 8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over with and including 10mm thick backing coat in CM 1:4 including dismantling of tiles complete all as specified and directed by Engineer in Charge. |
| 58 | M&L for virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 15mm thick screed bed in CM 1:6 including dismantling of tiles complete all as specified and directed by Engineer in Charge. |
| 59 | Description all as per ser item No 58 above, but on vertical surfaces such as skirting over with and including 10mm thick backing coat in CM 1:4 including dismantling of tiles complete all as specified and as directed by Engr - in - charge. |
| 60 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. |
| 61 | M & L for machine cut kota stone slab flooring 20 to 25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with and including 15mm thick screed bed in CM 1:6 complete all as specified and directed by Engineer in Charge. |
| 62 | Description all as per ser item No 61 above but in riser of steps, skirting, dado and pillar laid over with and including 10mm thick backing coat in CM 1:4 and jointed all as specified and directed by Engineer in Charge. |
| 63 | M&L for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match shade of granite with and including 15mm thick screed bed in CM 1:4 complete all as specified and directed by Engineer in Charge. |
| 64 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations |
| 65 | S&F of 15mm dia bore steel water GI tubes medium grade with all fittings and fixed cocealed to walls, ceilings or laid in floors complete with and including taking up or down 15mm bore steel water tubing and connections complete all as specified and directed |
| 66 | S&F of 20mm dia bore steel water GI tubes medium grade with all fittings and fixed cocealed to walls, ceilings or laid in floors complete with and including taking up or down 20mm bore steel water tubing and connections complete all as specified and directed |
| 67 | Supply and fixed in repair safety locks mild steel with 4 levers for rolling shutter including removal of existing locks and fixing of new lock with complete accessories complete all as specified and directed. |
| 68 | Supply and fixed in repair ball bearing for rolling shutter including of removing of top cover of rolling shutter of any specifiction , fixing of new ball bearing , refixing of top cover of rolling shutter complete all as specified and directed. |
| 69 | Fixing only in repair of rolling shutter including of removing of top cover of , greasing , removing og bending of shutters , new fixing of anchoring rod, hasp, servising of springs , shutter running channels , etc , of rolling shutter of any specifiction , refixing of top cover of rolling shutter and make smooth opening and closing rolling of shutter, of shutter of any size , gear operated, or chain and pully etc , completed all as specified and directed. |
| 70 | S & F PVC 5 to 6 mm thick hollow PVC wall panelling including all fixing viz, U and L as design and pattern including all necessary framed works as per manufacturers instructions, make and design completed all as specified and directed. |
| 71 | M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed by Engr-in-Charge. |
| 72 | M&L Lagging to pipes used in internal water supply (internal dia of pipe 15mm) or plumbing all round with,25min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842 all as specified and directed by the Engr-in-Charge. |
| 73 | M&L Lagging to pipes used in internal water supply (internal dia of pipe 20mm) or plumbing all round with,25min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842 all as specified and directed by the Engr-in-Charge. |
| 74 | S&F in repair 15 mm bib tap ( fancy type) , cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed including taking down old one. |
| 75 | S&F in repair 15 mm bib tap cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed including taking down old one. |
| 76 | S&F in repair 15 mm PVC bib tap with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed including taking down old one. |
| 77 | S&F in repair 15 mm PVC stop cock with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed including taking down old one. |
| 78 | S&F in repair brass Chromium plated shower roses of size 125mm with or without swivel joints, any size, including fixing to steel pipe or unionincluding taking down old one. |
| 79 | S&F in repair CP angle valves (half turn type) conclead type (chromium plated fancy type) 15 mm dia, cast copper alloy, screwed down, high pressure with crutch or butterfly handles, screwed both end for iron pipe or for unions complete all as specified and directed including taking down old one. |
| 80 | S&F in repair Stop valves of size 20mm dia (half turn type) , cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed including taking down old one. |
| 81 | S&F in repair 15 mm dia CP Wall Mixer Telephonic with Crutch (Provision for hand shower) and complete set of hand shower (Make : Prayag ) complete all as specified and directed. |
| 82 | S&F in repair 15 mm dia CP Central Hole Basin Mixer without Pop-up waste system (Make : Prayag) complete all as specified and directed. |
| 83 | S&F in repair 15 mm dia CP Sink Mixer with regular spout (W/M) (Make : Prayag) complete all as specified and directed. |
| 84 | S&F in repair Vitrous china wash hand basin, white, flat back of size 630 x 450 mm white excluding taps, waste, chain and plug and porcelain stopper but including bracket, cutting for and pinning the ends of brackets including PTMT waste coupling 32 mm as suitable complete all as specified and directed by the Engr-in-Charge. |
| 85 | Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes exc 250 litre & n.exc 500 litre capacity including lime wash/Bleaching wash, necessary fittings like tank nipple washers, T & P as required |
| 86 | Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes exc 500 litre & n.exc 1000 litre capacity including lime wash/Bleaching wash, necessary fittings like tank nipple washers, T & P as required |
| 87 | S&F in repair Vitrous china wash hand basin with full pedestal of size 835 x 560x440mm white or cream colour excluding taps, waste, chain and plug and porcelain stopper but including bracket, cutting for and pinning the ends of brackets all as specified. |
| 88 | S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm including PTMT waste coupling & waste pipe complete all as specified and directed by Engr-in-Charge. |
| 89 | S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm including PTMT waste copupling & waste pipe complete all as specified and directed by Engr-in-Charge. |
| 90 | S&F Stainless steel kitchen rack of size of 900 x900 x 250mm complete all as specified and as directed. |
| 91 | S&F PTMT grating dome 100 mm dia (minimum weight 25 gms) complete all as specified and directed including taking out old one. |
| 92 | S&F rotational moulded polythene water storage tank 500 ltrs (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I with and including dismantling water tank of capacity exceeding 250 liters but not excedding 500 Ltrs and including 20mm ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule & nipple suitable for HDPE water tank (Min weight 15mm-38 gms/20mm-45gms/25mm-65gms) complete, all as specified and directed by Engr -in-Charge. |
| 93 | S&F rotational moulded polythene water storage tank 1000 ltrs (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I with and including dismantling water tank of capacity exceeding 500 liters but not excedding 1000 Ltrs and including 20mm ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule & nipple suitable for HDPE water tank (Min weight 15mm-38 gms/20mm-45gms/25mm-65gms) complete, all as specified and directed by Engr -in-Charge. |
| 94 | S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white with P or S trap with and including plastic water closet seat cover , connection to trap, flushing pipe & anti -syphonage pipe etc including necessary materials for fittings & making good to floor complete all as specified and directed by Engr-in-Charge.. |
| 95 | S&F in repair vitreous China, squatting pan, Orissa Pattern, size 630 x 450 mm white, with integral foot rests (excluding flushing cistern and flush pipe) with CI trap of suitable size ( P or S type) including connection to trap and to flushing pipe, anti syphonic pipe etc complete including provision of lime concrete bedding & making good to floor complete complete all as specified and directed including taking out old one. |
| 96 | S&F in repair 10 Ltr capacity PVC valveless syphonic action type flushing cistern low level white, with inlet, ball valve, float and handle including PVC flush pipe and brackets complete fixed in wall and floor to trap of WC as required and as directed. |
| 97 | S&F in repair 15 mm dia PVC connections, 600 mm long with PTMT nuts of suitable size at two end complete all as specified and directed including taking out old one. |
| 98 | S&F in repair 15 mm dia PVC connections, 450 mm long with PTMT nuts of suitable size at two end complete all as specified and directed including taking out old one. |
| 99 | M&L rendering 15 mm thick in CM 1:6 on brick/concrete/stone wall surfaces of any description, and finishing the surfaces even and smooth without using extra cement complete with and including taking down cement or lime plaster of any description from stone /brick/concrete wall etc incl raking out joints hacking for key scrurbbing down with water and disposing of the rubbish complete all as specified and directed by Engr-in-Charge. |
| 100 | M&L rendering 15 mm thick in CM 1:4 with and including mixing of liquid WPC of approved make @ 200ml per bag of cement on brick/concrete/stone wall surfaces of any description, and finishing the surfaces even and fair complete with and including taking down cement or lime plaster or racking of pointing and scrubbing out existing finishes on wall of any for three storey bldg incl all necessary arrangement like scaffolding and masonry complete all as specified and directed by Engr-in-Charge. |
| 101 | M&L rendering 10 mm thick in CM 1:3 on concrete as in ceiling/landing etc on concrete surface finish even and smooth without using extra cement with and including taking down cement or lime plaster of any description complete all as specified and directed by Engr-in-Charge. |
| 102 | M&L brick work with sub class 'B' bricks straight or curved in plan exc 6 mtr mean radius built in CM (1:6) using old size bricks with and including demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed by Engr-in-Charge. |
| 103 | M&L brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick wall built in CM 1:4 with and including demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed by Engr-in-Charge. |
| 104 | M&L for preparing new plastered or unplastered surfaces on walls and applying two coats of oil emulsion distemper over a coat of wall care putty with rubbing or smoothing of surface upto ture finish over a coat of water base primer complete all as specified and directed by Engr-in-Charge. |
| 105 | M&L for preparing new plastered or unplastered surfaces and applying two coats of cement based paint over a coat of water base primer complete all as specified and directed by Engr -in-Charge.. |
| 106 | M&L for preparing new plastered or unplastered surfaces of ceiling and applying two coats of two coat of white wash complete all as specified and directed by Engr-in-Charge. |
| 107 | M&L Granite (of any type) tiles, 18-20 mm thick machine cut laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of the granite stone including cutting and polishing with and including 20mm thick screed bed or bedding in cement mortar 1:4 and including dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premisescomplete all as specified and directed by Engr-in-Charge. |
| 108 | M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed by Engr-in-Charge. |
| 109 | S&F in repair single/multi PVC (SWR) floor trap 75mm to 110mm dia, plain with grating including joining to waster pipe, fixed in cement concrete type B-1 (1:2:4) using 20mm graded broken stone aggregate complete all as specified and directed by Engr-in-Charge. |
| 110 | S&F in repair 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls/floors with necessary MS clamps including taking down old pipes all as specified and as directed |
| 111 | S&F 75 in repair mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls/floors with necessary MS clamps including taking down old pipes all as specified and as directed |
| 112 | S&F 110 mm PVC (SWR) access door bends any radius including taking down old all as specified and as directed |
| 113 | S&F 75 mm PVC (SWR) access door bends any radius including taking down old all as specified and as directed |
| 114 | S&F 110mm PVC (SWR) junction single,(Single T) equal or unequal provided with access door complete all as specified and directed by Engr-in-Charge. |
| 115 | S&F 75mm PVC (SWR) junction single,(Single T) equal or unequal provided with access door complete all as specified and directed by Engr-in-Charge. |
| 116 | S&F 110mm PVC (SWR) vent cowl complete all as specified and directed by Engr-in-Charge. |
| 117 | Notes :- Amount of Credit Schedule for Schedule 'A' Part-ll shall be deducted from total quoted amount of BOQ to arrive at the contract sum. Please Enable Macros to View BoQ information |
