|
| 1 | Taking down chowkhat with shutters (without taking off shutters from the frame) exc. 1.50 Sqm but n exc. 4 Sqm each complete and all as specified. |
| 2 | Taking down chowkhat with shutters (without taking off shutters from the frame) n exc. 1.50 Sqm each complete and all as specified. |
| 3 | Taking down Shutter of any description but n exc 1 sq. including all fittings complete all as specified and directed |
| 4 | Taking down Shutter of any description but exc 1 sq. m and n exc 2 sq. m including all fittings complete all as specified and directed |
| 5 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories |
| 6 | Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level) complete all as specified. |
| 7 | Dismantling floor hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises. |
| 8 | Dismantling Stone slabs Laid bedded and pointed in any mortarand tiles of any description or thickness in floors, aprons etc |
| 9 | Demolition of Brickwork or stone/boulder masonry, built in lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles in cement or cement lime mortar complete. |
| 10 | Dismantling wall and ceiling board (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed. |
| 11 | Taking down cement or cement lime plaster, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete. |
| 12 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including nsinital or similar pattern roof coverings complete all as specified. |
| 13 | Taking up or down steel tubing and connections, 15mm bore including cleaning for refixing or removal to store complete all as specified and as directed. |
| 14 | Taking up or down steel tubing and connections, 20mm bore including cleaning for refixing or removal to store complete all as specified and as directed. |
| 15 | Dismantling wrought iron or mild steel work of any description not otherwise provided for |
| 16 | S&F powder coated ( thickness of powder coating not less than 50 micron) Anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified. |
| 17 | S&F powder coated ( thickness of powder coating not less than 50 micron) Anodised aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handels 2 Nos in each door, hinges, anodised alumnium snap beading, screws etc. complete all as specified |
| 18 | S&Fpowder coated ( thickness of powder coating not less than 50 micron) Anodised aluminium window & ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws anodised aluminium fittings such as peg stays 150mm long, hinge type B-21 100mm long, suitable handle complete all as specified |
| 19 | S&F powder coated ( thickness of powder coating not less than 50 micron) Anodised aluminium window & ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified |
| 20 | S&F for Anodised aluminium grill (anodised transparent or dyed to required shade according to IS : 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening all complete as per requirement and direction of Engineer-in-Charge. |
| 21 | S&F Sheet glass 4.8mm thick, ordinary quality & glazing with oil putty in square n exc 0.5 sq.m in each pane fixing to aluminum frame with EPDM gasket all complete as per requirement and direction of Engineer-in-Charge. |
| 22 | S&F Sheet glass 4.8mm thick, ordinary quality & glazing with oil putty in square n exc 0.5 sq.m in each pane including hacking out old broken glass (any thicknesss, size,quality or description) from metal frame inlcuding punching or drilling out old glazing pins/spring clips & providing & fixing new ones all complete as per requirement and direction of Engineer-in-Charge. |
| 23 | S&F Sheet glass 4.8mm thick, ordinary quality & glazing with oil putty in square exc 0.5 sq.m in each pane including hacking out old broken glass (any thicknesss, size,quality or description) from metal frame inlcuding punching or drilling out old glazing pins/spring clips & providing & fixing new ones all complete as per requirement and direction of Engineer-in-Charge. |
| 24 | S&F Sheet glass 4.8mm thick, ordinary quality & glazing with oil putty in square exc 0.5 sq.m in each pane ifixing to aluminum frame with EPDM gasket all complete as per requirement and direction of Engineer-in-Charge. |
| 25 | S&F Figured glass 4.0mm thick, pin head type & glazing with oil putty in squares n exc 0.5 sq.m in each pane |
| 26 | S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in squares n exc. 0.50 Sqm in each panes complete and all as specified. |
| 27 | S&F in repairs 3mm thick sheet glass ordinary quality and glazing with oil putty in square n exc. 0.5 Sqm in each pane including including hacking out old broken glass (any thicknesss, size,quality or description) from metal frame inlcuding punching or drilling out old glazing pins/spring clips & providing & fixing new ones all complete as per requirement and direction of Engineer-in-Charge |
| 28 | S&F in Galvanised mild steel wire cloth, 0.56 nominal dia of wire & average width of aperture 1.18mm with tinned tacks, or galvanised wire staples |
| 29 | S&F in repair Galvanised mild steel wire cloth, 0.56 nominal dia of wire & average width of aperture 1.18mm with tinned tacks, or galvanised wire staples |
| 30 | S&F 2nd class softwood plain , solid , straight chowkhat and frames , wrought , framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints in 2nd class Hard wood complete all as specified. |
| 31 | M&L for Pressed steel frames for doors size 105x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed. |
| 32 | M&L for Pressed steel frames for doors size 125x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed. |
| 33 | S&F for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified. |
| 34 | S&F factory made 35 mm thick 2nd class Hard Wood of plain framed panelled shutter ( two panels) with panels of timber flat on both sides feather edged), or of veneered particle board medium density or particle board with commercial face complete all as specified. |
| 35 | S&F 35mm th 2nd class soft wood for Glazed skeleton shutters for door open rebated and prepared to receive glass gauge etc. (with sash bars) edges of framing plain, chamfered or rounded , fitted with cuts and mitred beads for securing glass etc. size of members of shutter as specified in SSR Part- I section -8 clause 8.23 (b). |
| 36 | S&F 30mm th 2nd class soft wood for Glazed skeleton shutters for door open rebated and prepared to receive glass gauge etc. (with sash bars) edges of framing plain, chamfered or rounded , fitted with cuts and mitred beads for securing glass etc. size of members of shutter as specified in SSR Part- I section -8 clause 8.23 (b). |
| 37 | S&F for Factory made solid PVC door frame of size 50 x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified. |
| 38 | S&F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified. |
| 39 | S&F 100 mm long aluminium tower bolt, complete and all as specified. |
| 40 | S&F MS 125 mm size butt hinges medium wt. of cold rolled complete and all as specified. |
| 41 | S&F for Aluminium handles, cast type anodised150mm size complete all as specified |
| 42 | S&F MS 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete |
| 43 | S&F 150 mm long aluminium tower bolt, complete and all as specified. |
| 44 | S&F MS 75 mm size butt hinges medium wt. of cold rolled complete and all as specified. |
| 45 | S&F for Aluminium handles, cast type anodised100mm size complete all as specified |
| 46 | S&F for Hasp and staple 150 mm size, safety type aluminium anodised with mild steel hinge pin including bolt to hinge plate, fixed with screws complete all as specified. |
| 47 | S&F in repair 2nd class Hard Wood Plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads cross sectional area exc 13 sqcm and n exc 25 Sqcm complete all as specified. |
| 48 | M & L for 6mm verneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face decrorative veneer and one face plain of required texture & colour fixed with nails to timber frame work for any surface with and including dismantling wall and ceiling boards of an description complete all as specified and directed by Engr-in-charge |
| 49 | S&F 18/19 mm thick 12054 Block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work including dismantling boarding any descritption complete all as specified. |
| 50 | S&F PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in tranches or in floors or wall (110mm bore) including taking down all as specified. |
| 51 | S&F PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in tranches or in floors or wall (75mm bore) including taking down all as specified. |
| 52 | S & F Low density polyet hylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors et |
| 53 | S&F PVC (SWR) bend 110mm dia any radius all as specified. |
| 54 | S&F PVC (SWR) bend 75mm dia any radius all as specified. |
| 55 | S&F PVC (SWR) branch piece, single (single Y) equal or unequal 75 mm dia all as specified |
| 56 | S&F PVC (SWR) junction single (single T) equal or unequal (75mm dia) all as specified. |
| 57 | S&F PVC (SWR) junction single (single T) equal or unequal (110mm dia) all as specified. |
| 58 | S&F PVC (SWR) vent cowl 75mm dia all as specified. |
| 59 | M&L for 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified. |
| 60 | M&L for 75mm dia PVC (SWR) multi floor trap, plain with grating including jointing with solvent cement complete all as specified. |
| 61 | Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. including cleaning with Bleaching Powder Exc 250 & N Exc 500 Ltrs upto a height 9 mtrs |
| 62 | Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. cleaning with Bleaching Powder Exc 500 & N Exc1000 Ltrs upto a height 9 mtrs |
| 63 | S&F in repair rotational moulded HDPE water storage tanks (cylindrical vertical with closed top) of 500 litres capacity, ISI marked, double layered hoisted and fixed in position including connecting up pipes including dismantling of water tank with complete fittings , complete all as specified. |
| 64 | S&F in repair rotational moulded HDPE water storage tanks (cylindrical vertical with closed top) of 1000 litres capacity, ISI marked, double layered hoisted and fixed in position including connecting up pipesincluding dismantling of water tank with complete fittings, complete all as specified. |
| 65 | S&F in 20mm bore ball brass valves, high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule and fixed complete all as specified. |
| 66 | S&F in repair PVC low level flushing cistern 10 litres capacity, white, with all fitting and fixtures including brackets and 32 mm bore PVC flush pipe 600mm long, complete all as specified and directed. |
| 67 | S&F in repair vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe,antisyphonage pipe, etc complete all as specified and directed. |
| 68 | S&F vitreous China squatting pan, ‘Orissa’ pattern, of size 580 mm x 440 mm white with integral foot rest complete including provn of plain cement concrete 1:3:6, type C-1 (using 20 mm graded crushed stone aggregate ) bedding, connection to trap, outgoing flushing pipe, anti sypohonage pipe,100 mm bore 'P' or 'S' of pipe etc, fixed in repair complete all as specified. |
| 69 | S & F in repair vitreous China wash hand basin white flat back of size 550 mmx400mm fixed on and fixing of cantilever brackets of mild steel angle 35 mm x 35 mm x 5 mm, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe (rigid quality) including fixing of tap etc. complete all as specified and directed. |
| 70 | S & F in repair vitreous China wash hand basin white oval type of size 550 mmx400mm fixed on Slab with 32mm dia brass waste coupling and 32 mm dia PVC waste pipe (rigid quality) including fixing of tap etc. complete all as specified and directed. |
| 71 | S&F in repair Angle valves, 15 mm bore, fancy type, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 72 | S&F in repair Gun metal 20mm bore globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 73 | S&F in repair pillar tap cast copper alloy with capstin heads chromimium plated fancy type screwed down high pressure with or without lettered hot or cold with long screwed shank and fly nuts, screwed for iron pipe 15 mm bore complete all as specified. |
| 74 | S&F 600mmx 450mm bevelled edge looking mirror of selected quality of oval shape glass, mounted on 6mm thick AC building board or commercial ply wood with first class hard wood decorated beading all round including all necessary fixing arrangement & fixed to wooden plug with chromium plated brass screws and cup washers, fixed in repair complete all as specified. |
| 75 | S&F in repairs brass chromium plated wall mixer for mixing Hot & cold water , high pressure, screwed down for 15 mm bore iron pipe fixedcomplete all as specified and directed. |
| 76 | S&F in repair Pillar Brass CP mixer for mixing hot & cold water screwed , chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipes fixed in repairs complete all as specified and directed . |
| 77 | S&F in repair brass chromium plated shower rose 65mm to 90 mm size with swivel joints including shower arm, complete all as specified and directed. |
| 78 | S& F in repair PVC connections 15 mm, 600 mm length with PTMT nuts at both ends complete all as specified and directed. |
| 79 | S&F in repair bib taps long body cast copper alloy chromium plated with capstan head screwed down, screwed for iron pipe or for brass ferrule 15 mm bore of approved make complete all as specified and directed. |
| 80 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified complete all as specified. |
| 81 | Brick work with sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 m mean radius, built in cement mortar 1:6 complete. |
| 82 | Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4. |
| 83 | Rendering 10 mm thick in cement mortar 1:6 on faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete. |
| 84 | Rendering 5 mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished fair & even complete. |
| 85 | Rendering 15 mm thick in cement mortar 1:4 on faces of brick work or concrete surfaces, mixed with water proofing compound @ 2% by weight of cement, finished fair and even complete all as specified and directed. |
| 86 | Supply only water proofing compound, complete all as specified and directed. |
| 87 | M&L Lagging to pipes used in internal water supply or plumbing all round with, 25mm thick bonded mineral wool pre-formed mineral wool pre-formed `SNAP ON' pipe secions of density 144 Kg/cum conforming to IS 9842 on pipe of internal dia 20 mm complete all as specified and directed. |
| 88 | M&L 16mm outer dia for 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as pecified and directed. |
| 89 | M&L 20mm outer dia for 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as pecified and directed. |
| 90 | Cutting chases, pinning in brickwork and making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed. |
| 91 | M&L for 25mm thick Cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate in leveling course, benching etc, finished even & rough to receive cement mortar screed bed complete. |
| 92 | M&L for 75mm thick Cement concrete type B- 2, 1:4:8 (40mm graded aggregate) |
| 93 | M & L light shade Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors incl 15mm thick screed bed in CM 1:6 etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed |
| 94 | Ditto all as per item No 93 above but as on vertical surface such as skirting, dados and risers over and including 10mm thick backing coat in CM 1:4 including taking down plaster complete all as specified and directed. |
| 95 | M&L Non skid ceramic coloured tiles 8 to 10 mm thick (Square/rectrangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11sqm, in floors etc over and including 15 mm thick cement screed bed in CM 1:6. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 96 | Ditto all as per item No 95 above but as on vertical surface such as skirting, dados and risers over and including 10mm thick backing coat in CM 1:4 including taking down plaster complete all as specified and directed. |
| 97 | M&L Non skid ceramic coloured tiles 8 to 10 mm thick (Square/rectrangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38sqm, in floors etc over and including 15 mm thick cement screed bed in CM 1:6. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 98 | Ditto as per item above but as on vertical surface such as skirting, dados and risers over and including 10mm thick backing coat in CM 1:4 including taking down plaster complete all as specified and directed. |
| 99 | M&L Colour Glazed ceramic coloured tiles in vertical surface 300x 200x 7 mm /450x300x7mm thick over and including 10 mm thick backing coat in CM 1:4 and set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed. |
| 100 | M&L Granite (of any type) tiles 20mm thick machine cut, bedded & jointed with grey cement slurry & pointed with white cement with admixure of pigment to match the shade of granite stone including cutting & polishing over 15mm thick screed in CM(1:4) |
| 101 | Ditto all as per item No 100 above but as on vertical surface such as skirting, dados and risers over and including 10mm thick backing coat in CM 1:4 including taking down plaster complete all as specified and directed. |
| 102 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar sitution. |
| 103 | M & L for complete removal of existing treatment and applying two coats exterior emulsion weather proof paint over one coat of exterior wall primer incl. preparation of surfaces of old decorated walls etc, properly making of v shape crakes and filling of all crakes with crakes seal of walls complete all as specified and directed by Engr-in-charge. |
| 104 | M& L for complete removal of existing treatment in wall surface and applying two coat, of Oil bound distemper over 2mm thick birla white putty including preparation of surface. |
| 105 | M&L for Preparing new plastered or unplastered surfaces of walls and applying two coats of oil bound distemper in approved colour/shade over a coat of chalk whiting primer after preparation of surfaces complete all specified. |
| 106 | M&L for Preparing new plastered or unplastered surfaces of ceiling and applying two coats of white wash complete all as specified. |
| 107 | M & L for Preparing new plastered or unplastered surfacest and applying two coats exterior emulsion weather proof paint over one coat of exterior wall primer incl. preparation of surfaces of old decorated walls etc, properly making of v shape crakes and filling of all crakes with crakes seal of walls complete all as specified and directed by Engr-in-charge. |
| 108 | M&L for Preparing new steel & iron surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide /zinc chrome primer complete all as specified. |
| 109 | M&L for Preparing old steel & iron surfaces of any description over 10 cm in width or girth and applying one coats of synthetic enamel paint complete all as specified. |
| 110 | M&L for Preparing new surfaces of wood and wood based materials of any description over 10 cm in width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified. |
| 111 | M&L for Preparing old surfaces of wood and wood based materials of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified. |
| 112 | S&F in repair harrison curtain rails of anodised alluminium alloy with fixing brackets, stops rollers etc complete all as specified. |
| 113 | S&F Anodised aluminium snap grid frame work for false ceiling all as specified size of Grid 605 x 605mm complete all as specified. |
| 114 | M&L for Providing & fixing Gypsum Board 12mm thick in ceiling fixed with screw /Snap grid as per manufacturers instructions complete all as specified and directed. |
| 115 | S&F 5 mm thick PVC sheet fillet of width 35mm for all paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as specified and directed. |
| 116 | S&F solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solven cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed. |
| 117 | S&F solid PVC ceiling consisting of 5mm thick plain colour PVC sheet inclusive of solven cement and fixing at site on GI frame as per specifications and drawing complete all as specified and directed. |
| 118 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall , fixed with self screws or 'J'/'L' hook complete all as specified. |
| 119 | S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screwes or 'J'/'L' hook Upto a height of 10 mtrs as specified complete all as specified. |
| 120 | S&F in repairs Door closer aluminium (extruded section body) hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified. |
| 121 | S&F in repairs brass Mortice lock, 4 levers, circular type, size 100 mm of Make : Godrej or equivalent, complete all as specified. |
| 122 | S&F MS Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for largegates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified |
| 123 | M & L for Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe-410- W(Gde E-250) quality B |
| 124 | M&L for PCC 1:3:6 type C1 using 20 mm graded crushed stone aggregate as in hold fasts, complete all as specified. |
| 125 | M&L for preparing old decorated plastered surfaces of wall including cornices,pilastered etc. by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and applying one coat of cement base paint on wall surface complete all as specified and directed. |
| 126 | M&L for preparing old decorated plastered surfaces of wall including cornices,pilastered etc. by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and applying one coat of oil bound distemper on wall surface (approved colour/ shade) complete all as specified and directed. |
| 127 | M&L for complete removal of existing treatment from walls (any number of layers) by scrapping with steel scrappers or any other means, including filling depressions of scrapped surfaces and applying two coats of oil bound distemper over and including a coat of 2mm thick wall care putty over a coat of chalk whiting primer including preparation of surfaces complete all as specified and directed.Note: The time difference between one coat and two coat will be decided by Engineer-in-Charge. |
| 128 | M&L for complete removal of existing treatment from Ceiling (any number of layers) by scrapping with steel scrappers or any other means, including filling depressions of scrapped surfaces and applying two coats of oil bound distemper over a coat of chalk whiting primer including preparation of surfaces complete all as specified and directed.Note: The time difference between one coat and two coat will be decided by Engineer-in-Charge. |
| 129 | M & L for complete removal of existing treatment on wall/roof projections including facia, comices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean, fre from dust, loose paint etc by skilled labour with mechanical sander having RPM of 1500-2700 rpm, with internal dust extraction system for clean environment, and preparation of old plastered/scrapped surfaces of wall/ceiling by filling cracks by external wall putty/crack fill paste and applying exterior water proof wall care putty @ 1 kg (undiluted) per sq mtr. of average thickness 1mm to 2mm over the prepared plastered wall / ceiling surfaces. one or more coats and grinding the puttied surfaces with mechanical grinder for make the surface even and smooth for receiving primer and applying two or more coats of 100% premium acrylic smooth exterior emulsion paint having VOC less than 50 gm/lit and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade(company depot tinted) with silicon additives & color stay technology excellent dirt pickup resistance @ 1.79 lit/10 sqm diluted with water as per manufactures instructions over and including priming coat of exterior primer applied @ 0.9 lit (Undiluted)/ 10 sqm over old/new putty surfaces of wall / ceiling complete all as specified and directed. Note:- Paint using Airless spray technology with max working pressure of 3300 PSI and capable of operating singlr spray gun with a max material hose length of 30 mtr the spray machine should be of reputed. |
| 130 | M&L for preparation of old wood and wood based materials surfaces of any description, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 131 | Applying one coat of synthetic enamel paint on steel & iron surfaces of any description, n exc 10cm width or girth when unconnected with other painting or when painted in different tint including preparation of old painted surface. |
| 132 | M & L for Preparation of newly plastered surfaces on wall /roof projectios including facia, comices etc and applying exterior water proof wall care putty @ 1 kg (undiluted) per sq mtr. of average thickness 1mm to 2mm over the prepared plastered wall / ceiling surfaces. one or more coats and grinding the puttied surfaces with mechanical grinder for make the surface even and smooth for receiving primer and applying two or more coats of 100% premium acrylic smooth exterior emulsion paint having VOC less than 50 gm/lit and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade(company depot tinted) with silicon additives & color stay technology excellent dirt pickup resistance @ 1.79 lit/10 sqm diluted with water as per manufactures instructions over and including priming coat of exterior primer applied @ 0.9 lit (Undiluted)/ 10 sqm over old/new putty surfaces of wall / ceiling complete all as specified and directed. Note:- Paint using Airless spray technology with max working pressure of 3300 PSI and capable of operating singlr spray gun with a max material hose length of 30 mtr the spray machine should be of reputed. |
| 133 | M&L for preparing new plastered or unplastered surfaces of two coats of oil bound distemper over and including a coat of 2mm thick wall care putty in approved colour/shade over a coat of chalk whiting primer after preparation of surfaces complete all as specified and directed. |
| 134 | M&L for preparing new plastered or unplastered surfaces of ceiling and applying two coats of oil bound distemper in approved colour/shade over a coat of chalk whiting primer after preparation of surfaces complete all as specified and as directed. |
| 135 | S& F in repair Bird Spikes of 304 stainless steel,UV stabilished polycarbonate ,height 11.43cm and spread width up to 20 cm for roof edges and buliding ledges the installation must be done by cleaning the surface throughly and fixing the base using screws and wall plugs or industrial grade weather-proof adhesive as per the specification. |
| 136 | Note for Sl item No 125 to 134:- The work for periodical services shall include the following and the rates quoted by the bidders shall include the same:- (a) Use of Scaffolding, trestles, ladders, cradles etc necessary for execution of work and protective measures. (b) Removing of Nails, making good holes, cracks etc. (c) Work in patches and in narrow/widths, bands, cornices, pilasters etc and cutting in edge of line where necessary. (d Spreading and removing covering to doors, windows, floors, fittings etc to protect them from splashes. (e) Washing floors, cleaning glass, joinery, electric fitting, wiring etc Drops and splashes of paint to be cleaned to the entire satisfaction of Engineer-in-Charge. (f) Sample patch of 10 sqm be prepared considering all the items of periodical and shall be got approved from GE prior to carrying out further work. (j) The work shall be carried out up to 3rd storey.(k) incl.removal of vegetation on walls incl roots on wall surfaces. |
| 137 | Notes :- Amount of Credit Schedule for Schedule 'A' Part-ll shall be deducted from total quoted amount of BOQ to arrive at the contract sum. Please Enable Macros to View BoQ information |
