|
| 1 | First class burnt brick work laid in cement sand mortar 1:5 in first storey upto 4 metres above plinth level |
| 2 | 12.5 mm thick cement plaster 1:4 |
| 3 | Finishing walls with cement based water soluble exterior paint two or more coats |
| 4 | Painting two or more coats excluding priming coat with synthetic enamel paint in all shadeson wood work, metallic or plastered, concretesurface to give an even shade. |
| 5 | Applying priming coat with cement primer |
| 6 | Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Glossfinish/Highlighter/emboss conforming to IS :15622 (thickness to be specified by the manufacture of approved make in all colours,shades except burgundy, bottle green, black ofsize 200 x 300 mm, 100x200mm, 200x200mm as approved byEngineer-in-Charge in skirting, risers of stepsand dados over 12 mm thick bed of cementMortar 1:4 (1 cement: 4 fine sand) andjointing with grey cement slurry @ 3.3kg persqm including pointing in white cement mixedwith pigment of matching shade complete. |
| 7 | Providing and laying vitrified floor tiles indifferent sizes in light colour shades madeusing Soluble Salt Technology (thickness to bespecified by the manufacturer) with waterabsorption’s less than 0.08% and conformingto IS : 15622 of approved make in all coloursand shades, laid on 20mm thick cementmortar 1:4 (1 cement: 4 fine sand),complete. ( Soluble salt Print Penetrationshould be up to 1 to 2 mm after the tiles arefired & polished ). size 600x600 mm |
| 8 | providing and laying anti skid ceramic floor tiles of size 300x300 mm x 10 mm thick of 1stquality conforming to IS : 15622 of approvedmake in colours such as White, Ivory, Grey,Fume Red Brown, laid on flooring skirting anddado in 12.5mm thick cement plaster 1:3 inbase and jointed with @ 3.3 kg/sqm includingpointing the joints with white cement andmatching pigment etc., completewhite cementslurry in joints including corners angles andbeading. |
| 9 | Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars riveted ormolded forged framed window guards, barrediron doors stair case iron railing etc. includingcost of bolts and nuts, screws, welding rodcomplete fixing in position |
| 10 | Cold twisted deformed (ribbed / Tor steel) Bars (Fe 550 grade as per IS 1786-2008) , forR.C.C works, where not including in thecomplete rate of RCC including binding,bending and placing in position complete |
| 11 | RECESSED HDPE PIPE WIRING SYSTEM WITHFLUSH PIANO TYPE SWITCHES:Wiring in PVC insulated copper conductor single core FR cable (ISI marked), overall1.5sq. mm, 1100volts grade to be laid in HDPE conduit pipe 20mm/25mm dia. (ISI Marked),recessed in wall etc., complete with powder coated/anodized concealed metal boxes(1.6mm thick with Brass lugs) required for having (Flush/ Piano type accessories) Steptype electronic fan regulators 100watts (socket size), bell push, 5Pin 6Amp. sockets(4Module Box), 16Amp. universal sockets (6Module Box), 6/16/20Amp. Switches etc.and covered with brown bakelite white glazedtranslucent backside painted sheet 3mm thicketc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box(1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 11⁄2\\" deep forwalls and CI 3\\" deep for ceiling), bonding to earth with PVC insulated copper conductorsingle core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plugcontrol point) and other petty material etc., including the cost of above material, cuttingand filling up of chases (with finishing the surface):-Wiring fan point (With fan box) |
| 12 | Wiring light point |
| 13 | Wiring 6Amp wall socket point |
| 14 | Wiring 16/20Amp power plug control point |
| 15 | 48 inch ceiling fan |
| 16 | LED lights 20w |
| 17 | P/F/I 1.5t Split AC with stabilizer |
| 18 | CONCEALED IN WALL: Providing and fixingChlorinated Polyvinyl Chloride (CPVC) pipes asper IS 15778 (ISI marked with the priorapproval of Engineer-in-Charge), havingthermal stability for hot & cold water supply,including all CPVC plain & brass threadedfittings i/c fixing the pipe with clamps at 1.00m spacing including jointing of pipes & fittings,with one step CPVC solvent cement and testing of pipes complete as per direction ofEngineer-in-Charge. SDR 11 CPVC pipes & fittings 20mm o/d |
| 19 | CPVC SDR 11 Pipe & fitting 25mm o/d |
| 20 | providing and fixing inposition chinawareIndian Orisa water closet size 580x440 mm ofapproved make (to the approval of theEngineer-in-charge) consisting of 10 ltr. PVCflushing cistern ISI makred including cost ofPVC long bend 32 mm dia complete in allrespect and to the entire satisfaction ofEngineer-in-charge. |
| 21 | providing and fixing inposition chinaware European type water closet P trap or S trap ofapproved make (to the approval of theEngineer-in-charge) consisting of 10 ltr. PVCflushing cistern ISI marked, PVC short bend32 mm dia including cost of seat covercomplete in all respect and to the entiresatisfaction of Engineer-in-charge. |
| 22 | Providing and fixing jet spray with 2-6\\" longPVC pipe. with CP brass nut |
| 23 | Providing and fixing in position vitreous Chinaware white lIndian make large flat backor angular lipped front urinal 375 x 390 x 590mm of approved make (to the approval of theEngineer-in-charge) consisting of C.P. brassUrinal waste Coupling dome type 32mm outerlength 75 mm , C.P. brass Urinal SpreaderOcular-Regular and C.P. brass tube connection300 mm long complete. |
| 24 | Providing and fixing P.V.C Waste Pipe Collapsible 32mm |
| 25 | providing and fixng In position CP brass soap dish of approved make (to the approvalof Engineer-in-charge ) fixed into wall withrawl plugs and C.P brass screws complete inall respect. CP brass soap dish |
| 26 | Providing and fixing in position 15mm i/d bib cock of approved make (to the approval of engineer in charge ) complete in all repsect CP brass Bib cock long nose / long body foam flow without flange |
| 27 | CP brass Bib cock foam flow without flange |
| 28 | Providing and fixing in positin stop cock/angle valve of approved make (to the approval of engineer in charge ) complete in all respectCP brass 15mm Angle valve without flange |
| 29 | Providing and fixing in position PVC flexible tube connection of approved make (to the approval of engineer in charge) complete in all respect PVC tube connection of sieze 15mm x 450 mm wit PTMT nut |
| 30 | Providing and fixing in position singel socketSWR UPVC soil waste or antisyphonage pipesas per IS 13592 of E.D.C manufacture or ofany other reputed firm including cutting,jointing, wastage, but excluding cost ofjointing. single socket type A 110mm o/d single socket SWR UPVC pipe lines |
| 31 | 90mm o/d single socket SWR UPVC pipe lines |
| 32 | Provding and fixing in position SS grating with frame of approved make (to the approval of engineer in charge ) complete in all respects |
| 33 | Providing and fixing in position SWR UPVCspecial for soil waste vent or anti syphonagepipes as per as per IS - 14735 includingcutting and wastage etc. cutting holes in wallsroofs or floors etc. and making good to itsoriginal condition but excluding cost of leadjoining. for 110mm o/dpipes Elbow 90 Degree |
| 34 | P Trap/Floor Trap 110mm x 110mm |
| 35 | Cement concrete 1:8:16 with stone aggregates 40mm gage mixing by mechanical means using concrete mixer volumetric type |
| 36 | Reinforced cement concrete M-25 mechanically batch mixed using btach type concrete mixer as per IS:1791 and vibrated by needle vibrator but exluding steel reinforcement centring and shuttering in superstructure |
| 37 | Tile terracing laid dry over roof consisting of one layer of tiles 22.86x11.43x3.83 including grouti Please Enable Macros to View BoQ information |
