|
| 1 | First class burnt brick work laid in cement sand mortar 1:5 in first storey upto 4 metres above plinth level |
| 2 | 12.5 mm thick cement plaster 1:4 |
| 3 | Painting two or more coats excluding priming coat with synthetic enamel paint in all shadeson wood work, metallic or plastered, concretesurface to give an even shade. |
| 4 | Applying priming coat with cement primer |
| 5 | providing and fixing inposition chinawareIndian Orisa water closet size 580x440 mm ofapproved make (to the approval of theEngineer-in-charge) consisting of 10 ltr. PVCflushing cistern ISI makred including cost ofPVC long bend 32 mm dia complete in allrespect and to the entire satisfaction ofEngineer-in-charge. |
| 6 | providing and fixing inposition chinaware European type water closet P trap or S trap ofapproved make (to the approval of theEngineer-in-charge) consisting of 10 ltr. PVCflushing cistern ISI marked, PVC short bend32 mm dia including cost of seat covercomplete in all respect and to the entiresatisfaction of Engineer-in-charge. |
| 7 | Providing and fixing jet spray with 2-6\\" longPVC pipe. With CP brass nut |
| 8 | providing and fixing in position vitreous Chinaware white lIndian make large flat backor angular lipped front urinal 375 x 390 x 590mm of approved make (to the approval of theEngineer-in-charge) consisting of C.P. brassUrinal waste Coupling dome type 32mm outerlength 75 mm , C.P. brass Urinal SpreaderOcular-Regular and C.P. brass tube connection300 mm long complete. |
| 9 | Vitreous white Chinaware Partition small partition size 69x 16.5 x 32.5 |
| 10 | Providing and fixing in position vitreouschinaware white lavatory suites of approvedmake (to the approval of Engineer-in-charge)consisting of C.P. brass waste 32mm dia withone C.P. brass pillar tap including Rack BoltScrew Pair 115mm long complete in allrespect. size 550mm x 400mm x 815 mm |
| 11 | Providing and fixing in position stainless steelsinks of approved make (to the approval ofEngineer-in-charge) 1mm thick,grade-304(18/8) with waste coupling complete in allrespect. Double bowl sink without drain board overall size 1330x515 bowl size 560mm x 410x200mm |
| 12 | providing and fixing in position 15mm i/d bib cock of approved make ( to the approval of engineer in charge ) complete in all respect CP brass bib cock long nose / long body foam flow without flange |
| 13 | CP brss bib cock foam flow without flange |
| 14 | Providing and fixing in position stop cock / angle valvle of apporved make ( to the approval of engineer - in charge ) complete in all respect CP brass 15mm concealed stop cock with flange |
| 15 | CP brass 15 mm angle valve without flange |
| 16 | Providing and fixing in position PVC flexible tube concnetion of approved make ( to the approval of engineer in charge ) complete in all respect PVC tube connection of size 15mm x 450mm with CP brass nut |
| 17 | Providing and fixing in position SS grating with frame of approved make (to the approval of engineer in charge ) complete in all respects |
| 18 | Supplying and fixing glass panes with glazing clip and special metal sash putty of approved make glass panes 4mm or 10.75 kg / sqm exceeding 0.4 sqm of area |
| 19 | Wire gauge fixed in steel windows, of standard rolled steel section with 3m thick flat iron cover moulding of 12.5 mm width fixed fixed with machine screws coplete in all respects |
| 20 | Factory manufactured flushdoor fixed in position iron hinges etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (code : II revision IS-2191 Part-I 1973 commercial with elm or gurjan facing on both sides wirh laminated core and lipped edges : 30mm thick |
| 21 | centring and shuttering for flat surface such as suspended floors, roofs , landings , chajjas, shelves etc |
| 22 | Cement concrete 1:2:4 with stone nallast or shingle mixing by manual means |
| 23 | Providing and installing 1.5Ton split AC |
| 24 | RECESSED PVC CONDUIT PIPE WIRINGSYSTEM WITH FLUSH PIANO TYPE SWITCHES:Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mmdia (ISI Marked) recessed in wall etc., complete with powder coated/anodizedconcealed metal boxes (1.6mm thick with Brass lugs) required for having (Flush/ Pianotype accessories) Step type electronic fan regulators 100watts (socket size), bell push,5Pin 6Amp. sockets (4Module Box), 16/20Amp. universal sockets (6Module Box),6/16/20Amp. Switches etc. and covered with brown bakelite white glazed translucentbackside painted sheet 3mm thick etc., PVC connector (For Fan Box and Call Bell), SteelHooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes(Four way PVC 11⁄2\\" deep for walls and CI 3\\" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade(For 6Amp. wall socket & plug control point) and other petty material etc., including thecost of above material, cutting and filling up of chases (with finishing the surface):- wiring fan point (without fan box) |
| 25 | Wiring light point |
| 26 | Wiring 6amp wall socket point |
| 27 | Wiring 16/20 amp power plug control point |
| 28 | P/F Ceiling Fan |
| 29 | black granite stone tiles 15mm to 20mm thick in skirting, risers of steps, dado walls andpillars laid in 12.5mm thick cement mortar 1:3(1 cement 3 coarse sand) and jointed withneat cement slurry mixed with pigment tomatch the shade of stone, including rubbingand polishing including labour for fixing dowelpins and cramps. Please Enable Macros to View BoQ information |
