|
| 1 | Building Work |
| 2 | M&L for PCC 1:5:10 type E-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed. |
| 3 | Material and labour for reinforcement cement concrete (nominal mix) (1:2:4) type B-0, using 12.50mm graded crushed stone aggregate as in chajjas, cooking platform and in shelves and the like complete all as specified and directed. Note: The rate included for necessary form work |
| 4 | M&L for taking down, chipping and removing the loose, spilt, damaged cement concrete, cement mortor surfaces of RCC Columns, beams, walls, chajjah etc and exposing the reinforced cement, wire brushing and cleaning the exposed steel reinforced bar, applying rust remover over the cleaned re-bar surface wash the re-bar with clean water for removing all rusts from the old re-bar surfaces, fixing new reinforcement/ steel wire mesh for strengthen the members as required, applying two coats of epoxy zinc primer on new and old steel surfaces, saturate the substrate with water applying one coat of polymer modified bond coat on affected concrete surfaces and finally providing cement concret (1:1.5:3) and coarse sand mortor in CM 1:3 mix , using polymer (10 to 15)% as per manufacturer's instructions complete all as specified and directed. Make : Dr. Fixit/Sunanda/chemestik/Fosrok Note :- (i) New reinforcement and MS Sections/ steel bars will be measured and paid separately.(ii) The rate included for welded mesh, scafolding and necessary form work up to triple story height. |
| 5 | M&L for roughening old surface of concrete roof/floors etc by picking, sweeping and washing down with water to remove dust/dirt and brushing neat cement @ 3.0 kg per sqm complete all as specified and as directed. |
| 6 | Demolition of brick work built in cement mortar incl all quoins, arches, pillars etc complete all as specified and directed . |
| 7 | M&L for Brick work with old size sub class \\"B\\" bricks, straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and as directed . |
| 8 | M&L for Brick work with old size sub class \\"B\\" bricks, straight or curved on plan to any radius as in half brick thick walls, built in CM 1:4 complete all as specified and as directed . |
| 9 | M&L for Demolition of reinforced cement concrete in any position and any description including cutting of reinforcement bars to facilitate demolition complete all as specified and directed. |
| 10 | M&L for Mild steel TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed. |
| 11 | Taking down cement plaster on brick or concrete surfaces etc including racking out joints hacking for key,scrubbing down with water etc (from walls and ceiling surfaces of any description) & removing debries out side the MoD land to a desiginated place earmarked by the local administration complete all as specified and as directed. |
| 12 | M&L for rendering 15mm thick in cement mortar (1:3) mixed with water proofing compound @ 3% by weight of cement as in sunken portion, finished even and fair without extra cement complete all as specified and as directed. |
| 13 | M&L for rendering 5mm thick in cement mortar (1:3) on concrete surfaces as in ceiling, finished even and smooth without extra cement complete all as specified and as directed. |
| 14 | M&L for rendering 15 mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed. |
| 15 | M&L for rendering 15mm thick in cement mortar (1:4) mixed with water proofing compound @ 3% by weight of cement finished even and fair without extra using cement complete all as specified and directed. Note:- WPC shall be measured and paid for separately. |
| 16 | M&L for preparation of new plastered surfaces as in ceiling and applying three coats of white wash complete all as specified and as directed. |
| 17 | M&L for preparation of old decorted plastered surfaces as in ceiling and applying one coats of white wash complete all as specified and as directed. |
| 18 | M&L for preparation of new plastered surface of wall applying two coats of oil bound distemper/ interior acrylic distemper on wall or concrete over a coat of primer on prepared surfaces including, rubbing with sand paper complete all as specified and directed.. |
| 19 | M&L for preparation of old plastered surface of wall applying One coats of oil bound distemper on wall or concrete over a coat of primer on prepared surfaces including, rubbing with sand paper complete all as specified and directed.. |
| 20 | M&L for preparation of newly plastered surfaces of walls and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and directed. |
| 21 | M&L for complete removal of existing treatment and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and directed.Note for item No 1.20 &1.21: Weather proof exterior emulsion paint and primer shall be of same manufacturer. |
| 22 | M&L for applying evenly a tack coat of industrial bitimen 85/[email protected] per sqm including cleaning the surface |
| 23 | Supply only intergral water profing compound complete all as specified and as directed. |
| 24 | Dismantling floor,hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and as directed. |
| 25 | M & L for coloured non skid/matt finish ceramic tiles, 7 to 8 mm thick, (square/ rectangular), area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of 15 mm thick in cement mortar (1:6) complete all as specified and as directed. |
| 26 | All as per item No 1.31 here-in-before but as in dado, riser & skirting over & incl 10mm thick rendering in CM 1:4 complete all as specified and as directed. |
| 27 | M & L for coloured non skid/matt finish ceramic tiles, 7 to 8 mm thick, (square/ rectangular), area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm sq.m in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of 15 mm thick in cement mortar (1:6) complete all as specified and as directed. |
| 28 | M&L for coloured glazed ceramic tiles of size 450x300x7 mm thick on vertical surfaces such as skirting/dado, set and jointed in neat cement slurry and pointed in coloured cement to match over and including rendering 10mm thick in cement mortar (1:4) complete all as specified and as directed. |
| 29 | M & L for 20 mm thick Granite stone slab (of any type) work (table rubbed and polished) in steps, jambs, urinal partitions, pillars, window- cills,cooking platforms and the like laid over & including 15mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shades complete all as specified and as directed. |
| 30 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5sq.m each complete all as specified and as directed. |
| 31 | Taking down chowkats or frames with shutters (without taking off shutter from the frames) exc. 1.5sq.m but not exc. 4sq.m each complete all as specified and as directed. |
| 32 | Taking down shutters exc 1 sq. m and n exc 2 sq. m each complete all as specified and as directed. |
| 33 | Refixing shutters of any description exc 1 sq. m and n exc 2 sq. m each complete all as specified and as directed. |
| 34 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying and fixing in opening as per specifications and drg, complete all as specified and as directed. |
| 35 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site complete all as specified and as directed. |
| 36 | S&F Pressed steel frames of Size 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including plain cement concrete 1:3:6 type C-0 (using 12.50 mm graded stone aggregate), as in back filling of pressed steel frames and similar work including necessary form work as requiredcomplete all as specified and as directed. |
| 37 | S&F Pressed steel frames for doors Size of frame 125 x 60 mm with one or more rebates including necessary fixing lugs hinges lock strike plate etc including plain cement concrete 1:3:6 type C-0 (using 12.50 mm graded stone aggregate), as in back filling of pressed steel frames and similar work including necessary form work as required complete all as specified and as directed. |
| 38 | S&F 35 mm thick, 2nd class hard wood, glazed & skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. Sizes of members of shutters as specified in SSR Part I, Section 8, Clause 8.24 (a) complete all as specified and as directed. |
| 39 | S&F for Second class Hard wood rail and style, thickness of shutter 35mm, plain framed pannelled shutter( two panel)with lock rail and panel of 9mm BWP commercial ply or 10mm vennered particle board with commercial vennering on both faces. The size of rail and stile as per IS:1003 ( Part-I), Kiln seasoned and chemically pressure treated, etc complete all as specified and as directed. |
| 40 | S&F for factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 40 x 75 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with and including MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made & fixing in opening as per specification & drawing |
| 41 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush cup board frame as box, shelves and door shutter of size 18-22mm thick Lamination/Balancing on both side comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimun density of 650 kg/cum and having Good Screw Holding Capacity (screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisturproof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter with and including 18mm wide 0.8 to 1 mm thick PVC leaping on exposed face to match with shade of shutter fixed with suitable solvent and fixing with WPC beading 20 mm wide 18 mm thick fixed to wall with necessary full body threaded star headed counter sunk S.S screws and PVC rawl plug or PVC solvent,all as per direction of Engineer-In_charge. |
| 42 | S&F mild steel cold rolledl butt hinges medium weight of size 75mm complete all as specified and as directed. |
| 43 | S&F aluminium alloy handles, fabricated type, anodised of size 125 mm complete all as specified and as directed. |
| 44 | S&F aluminium anodised, barrel tower bolts of extruded section with length of bolt 150 mm and fixed complete all as specified and as directed |
| 45 | S&F aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy with length of bolt 250 mm and fixed complete all as specified and as directed. |
| 46 | S&F in repair 140mm long floor door stopper of aluminium alloy body and tongue with hard drawn steel springcomplete all as specified and as directed. |
| 47 | Supply and fixing Factory made box type steel window with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded, including provision of grill as per drawing with and including one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEAF/STD-185-2012 Sheets 1/3, 2/3 & 3/3. |
| 48 | All as per item above here-in-after but without sash bar |
| 49 | S&F for steel window or ventilator fixed type with glazing bars comlete all as specified and as directed |
| 50 | S&F in repair framed work such as grills/ grating/cooler stand etc with ends of bars shouldered and/or riveted or forged into spikes frame gurads bars barred iron, door ladders, framed balusters walk way railings frame work of water tanks and similar work complete all as specified and as directed |
| 51 | S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with screws or beading in steel/ wooden door / window complete as specified and directed. |
| 52 | S&F plain Sheet glass 3mm thick ordinary quality and glazing with oil putty in squeres n.exc 0.5 sqm in each panes complete all as specified and as directed |
| 53 | S&F pinheaded Sheet glass 3mm thick ordinary quality and glazing with oil putty in squeres n.exc 0.5 sqm in each panes complete all as specified and as directed |
| 54 | M&L for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surface of any description over 10 cm width or girth not otherwise described including prepration of surface complete all as specified and as directed |
| 55 | M&L for one coat of synthetic enamel paint on old steel surface of any description over 10 cm width or girth not otherwise described including prepration of surface complete all as specified and as directed |
| 56 | M&L for two coats of synthetic enamel paint over a coat of pink primer on Old wooden surface surface of any description over 10 cm width or girth not otherwise described including prepration of surface complete all as specified and as directed |
| 57 | M&L for two coats of synthetic enamel paint over a coat of pink primer on new wooden surface of any description over 10 cm width or girth not otherwise described including prepration of surface complete all as specified and as directed. |
| 58 | M&L for 25mm thick cement concrete type B-0, 1:2:4 (using 12.50mm graded stone aggregates), in sub base of floors, finished even & fair to receive bedding layer of cement mortar with using 3% WPC etc complete all as specified and as directed Note:- WPC shall be measured and paid for separately. |
| 59 | M&L for machine cut kota stone slab, 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including, cutting and mirror polishing with and including 20 mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified and as directed. |
| 60 | All as per item No. 1.65 here-in-before but as in riser of steps,dado/ pillars and vertical surfaces etc over and including 10 mm thick rendering on brick or concrete suface in CM 1:4 after taking down cement plaster on walls and racking out joints,hacking for key, scrubing down with water etc complete all as specified and as directed. |
| 61 | Rounding to edge of stone slabs one edge, such as in steps,cooking platform and other similar work complete all as specified and as directed. |
| 62 | S&F in repair stainless steel sink 1mm thick with drainage board for kitchen or laboratory with plugs, washers and wastes, bedding in cement mortar to dwarf wall or including fixing contilever brackets and connecting union to pipe overall size 915 x 460 mm with bowl size 410 x 330 x 160mm complete all as specified and as directed. |
| 63 | S & F in repairs vitreous china wash basin, white, flat back of size 550mm x 400mm including brackets grouted in cement mortar 1:2 in wall complete all as specified and as directed. |
| 64 | S&F in repair for Vitreous China wash down water closet pan ( pedestal pattern) white ( excluding flushing cistern and flush pipe) including plastic water closet seat white with jet, closed pattern with flat botton and cover and mild steel chromium plated or aluminized hinging device complete all as specified and as directed. |
| 65 | S & F in repairs vitreous china squating pan ''Orissa pattern size 580 x 440mm white with integral foot rest (excluding, flushing cistern and flush pipe) including connection to ''P'' trap and to flushing pipe complete all as specified and as directed. |
| 66 | S & F in repair 10 ltrs capacity PVC low level syphonic action type flushing cistern including ball valve, bracket, inlet, outlet, overflow and PVC connection complete all as specified and as directed. |
| 67 | S & F in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 5mm thick PVC and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 68 | S & F in repairs pillar taps cast copper alloy with capstan head, chromium plated, fancy type, screwed down high pressure, with or without lettered ‘hot’ or ‘cold’ with long screwed shanks and fly nuts, screwed for iron pipes 15mm bore complete all as specified and as directed. |
| 69 | S&F PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and as directed. |
| 70 | M&L for Galvanised iron tubing 15mm bore, medium grade, with all fittings fixed to walls or ceiling or laid in floors, in concealed pipe work including making good the chases etc in cement mortar (1:3) after fixing of pipe, including taking down of old rusted/unserviceable GI pipe complete all as specified and directed. |
| 71 | M&L for Galvanised iron tubing 20mm bore, medium grade, with all fittings fixed to walls or ceiling or laid in floors, in concealed pipe work including making good the chases etc in cement mortar (1:3) after fixing of pipe, including taking down of old rusted/unserviceable GI pipe complete all as specified and directed. |
| 72 | Cutting existing steel tubing for alterations or additions and Screwing existing steel tubing for alterations or additions ( or lengthening screw on pipe to form connector) for 15 mm bore of pipe complete all as specified and directed. |
| 73 | S & F in repairs bib tap long body, cast copper alloy, fancy type, chromium plated, screwed down high pressure, screwed for 15mm bore of iron pipe or for brass ferrule complete all as specified and as directed. |
| 74 | S & F in repair 125mm chromium plated overhead shower ABS with Brass Arm 450mm and flange complete all as specified and as directed |
| 75 | S & F in repairs CP brass towel rail D type 60 Cm long and 20mm dia fixed to wall with CP brass screws and plastic cleats complete all as specified and as directed. |
| 76 | S&F grating doom 100mm dia size with PTMT complete all as specified and as directed. |
| 77 | S & F in repairs stop valve 15 mm bore of pipe, fancy type, chromium plated with long shank and cup (Concealed Type) cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed. |
| 78 | S & F in repairs sheet glass shelf assembly 300mm wide, 600mm long with chromium plated brackets and railing (heavy duty), thickness of glass 6mm complete all as specified and as directed. |
| 79 | S & F in repairs stainless steel plate rack made out of 0.85mm thick stainless steel sheet with over all size 760x610x254mm fixed to walls with chromium plated screws complete all as specified and as directed. Make : Pryag Cat part No :P-330 or equivalent in Appendix 'B' |
| 80 | S&F in repairs stop valves/angle valve, cast copper alloy, 15mm bore of pipe , screwed down, high pressure, fancy type chromium plated, screwed, both ends for iron pipe or for unions and fixed complete all as specified and as directed. |
| 81 | S & F 110 mm dia bore PVC (SWR) pipe (Type 'B') having pressure rating 6 kgf/cm2 single socketed in trenches/floors in any length with rubber ring joints complete all as specified and as directed. |
| 82 | S & F 75 mm dia bore PVC (SWR) pipe (Type 'B') having pressure rating 6 kgf/cm2 single socketed in trenches/floors in any length with rubber ring joints complete all as specified and as directed. |
| 83 | S & F 110 mm dia bore PVC (SWR) pipe (Type 'B') having pressure rating 6 kgf/cm2 single socketed in any length with rubber ring joints fixed to wall complete all as specified and as directed. |
| 84 | S & F 75 mm dia bore PVC (SWR) pipe (Type 'B') having pressure rating 6 kgf/cm2 single socketed in in any length with rubber ring joints fixed to wall complete all as specified and as directed. |
| 85 | S & F PVC (SWR) bend/Door bend any radius for 110 mm bore pipe incl jointing material complete all as specified and as directed. |
| 86 | S & F PVC (SWR) bend any radius for 110 mm bore pipe incl jointing material complete all as specified and as directed. |
| 87 | S & F PVC (SWR) junction single, (Single T) equal or unequal for 110mm dia bore complete all as spd and as directed |
| 88 | S & F PVC (SWR) bend/Door bend any radius for 75 mm bore pipe incl jointing material complete all as specified and as directed. |
| 89 | S & F PVC (SWR) bend any radius for 75 mm bore pipe incl jointing material complete all as specified and as directed. |
| 90 | S & F PVC (SWR) junction single, (Single T) equal or unequal for 75mm dia bore complete all as spd and as directed |
| 91 | S&F in repair 75 mm dia PVC (SWR ) floor trap/ nahani trap plain with grating including jointing with solvent cement complete all as specified and as directed. |
| 92 | S & F PVC (SWR) vent cowl equal or unequal for 110mm dia bore complete all as specified and as directed. |
| 93 | S&F in repairs Rotational moulded PVC water storage tanks 500 Ltrs capacity, double walled (ISI marked) with ISI marking embossed on the tank (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified & directed. |
| 94 | Demolition of cement concrete (unreinforced) in ground floors/pavings n.exc 15 cm thickness (below or above the ground level) complete all as specified & directed. |
| 95 | Demolition of cement concrete (unreinforced) in any position not otherwise specifically provided for complete all as specified & directed. |
| 96 | M&L for 75mm thick PCC 1:3:6 type C-1 using 20mm graded crushed stone aggregate laid in 1:20 slope as in plinth protection finished even and smooth without using extra cement with and including filling of expansion joints with mastic filling complete all as specified and as directed. |
| 97 | S & F in repair mild steel chromium plated curtain rod 20mm dia with and including mild steel chromium plated decorative round fennels on either ends and MS brackets fixed to walls with chromium plated brass screws and PVC rawl plugs complete all as specified & as directed. |
| 98 | S&F mild steel, 300 mm long ordinary helical door spring incl roller and roller plate complete all as specified and directed. |
| 99 | INTERNAL ELECRIFICATION WORK |
| 100 | Taking down carefully copper / aluminum point wiring (light, fan, socket or power) complete with fittings such as switches, ceiling roses, pendants, lamp holders, bracket, light fittings, bulk head fittings, tube light fittings etc. and making good disturbed surfaces of walls, floors etc as per existing complete all as specified and directed. Please Enable Macros to View BoQ information |
| 101 | Taking down carefully copper / aluminum point wiring (light, fan, socket or power) complete with fittings such as switches, ceiling roses, pendants, lamp holders, bracket, light fittings, bulk head fittings, tube light fittings etc. and making good disturbed surfaces of walls, floors etc as per existing complete all as specified and directed. Please Enable Macros to View BoQ information |
