|
| 1 | Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for Key, scrubbing down with water etc including removal of debris outside MoD land complete all as specified and as directed. |
| 2 | Taking down of shutter and refixing of shutters of any discription in the same opening after easing and adjusting area n exc 1 sqm each complete all as specified and as directed. |
| 3 | Taking down of shutter and refixing of shutters of any discription in the same opening after easing and adjusting area exc 1 Sqm and n exc 2 sqm each complete all as specified and as directed. |
| 4 | S&F uPVC white colour fixed glazed window / ventilator made of (small serirs) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9+/-0.2 mm and single glazing comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profile duly reinfoced with 1.6+/-0.2mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality including 4.8mm thick sheet glass and Wire netting of stainless steel wire 1.4mm dia fixed with tinned tacks of stainless steel wire staples complete all as specified and as directed. |
| 5 | S&F factory made uPVC white colour Three track three panels sliding window with fly proof SS wire mesh ( two Nos Glazed and one No. wire mesh panels) upto 1.50m height made of (big series) frame 116x45mm & sash 46x62mm both having wall thickness of 2.3+-0.2mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of window above 1.75 Sqm ) comprising of uPVC multichambbered frame, with inbuilt roller track and sash extruded profile duly reinforced with 1.60+/-0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gesket, wool Pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardwares and drainage of water etc. after fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approed quality, including 4.8mm thick sheet glass and Wire netting of stainless steel wire 1.4mm dia fixed with tinned tacks of stainless steel wire staplescomplete all as specified and as directed. |
| 6 | M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for inseritng roof sheet in wall, etc., and making good, cutting not exc 10 cm girth in brick wall. complete all as specified and as directed.Note: Work shall be carried out to bldgs with height upto 4 storey. |
| 7 | S&F in repairs decorative type curtain rod including decortaive double hung bracket and end cap of any material as per sample & as approved including taking down old curtain rod, any type and connected fittings complete all as specified and as directed. |
| 8 | Supplying and laying for 20 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls including all brass fitting/fixtures in any grade to receive plumbing fittings and fixtures complete all as specified and directed |
| 9 | Supplying and laying for 25 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls including all brass fitting/fixtures in any grade to receive plumbing fittings and fixtures complete all as specified and directed |
| 10 | Supplying and laying for 32 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls including all brass fitting/fixtures in any grade to receive plumbing fittings and fixtures complete all as specified and directed |
| 11 | S&F in repairs 20mm bore ball valves, with handle head, screwed both ends for CPVC pipes complete all as specified and as directed. |
| 12 | S&F in repairs 25mm bore ball valves, with handle head, screwed both ends for CPVC pipes complete all as specified and as directed. |
| 13 | S&F in repairs CP single lever wall mixture for mixing hot and cold water including 3-in-1 system with & including provisions for both hand shower and overhead shower with 115mm long bend pipe, connecting legs & wall flange (with hand & overhead shower with all fittings), complete all as specified and as directed. |
| 14 | S&F in repairs angular stop cock made of brass chromium plated screwed both ends for iron pipe for 15mm bore complete all as specified and as directed. |
| 15 | S&F in repairs 15 mm bore, two way bib tap, CP, screwed down screwed for iron pipe complete all as specified and as directed. |
| 16 | S&F in repairs 15 mm bore, bib tap, CP long body, screwed down screwed for iron pipe complete all as specified and as directed. |
| 17 | S&F in repairs factory made 800 mm x 600 mm bevelled edge mirror inbuilt strip light facility to On/Off of selected quality glass, fency type and fixed with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 18 | S&F in repairs CP paper holder fancy type complete all as specified and as directed. |
| 19 | S&F in repairs CP soap dish fancy type complete all as specified and as directed. |
| 20 | S&F in repairs towel rack stainless steel 600mm long complete all as specified and as directed. |
| 21 | S&F in repairs towel rail of brass chromium plated tube 19 to 20 mm dia 600 mm long `D' type complete fixed in repairs with brass chromium plated screw complete all as specified and as directed. |
| 22 | S&F 12mm thick toughened glass for shower pation openable/ sliding type fixed with aluminium fram complete, fixing bolts, handle and all necessary fittings complete all as specified and as directed. |
| 23 | S&F in repairs vitreoues china WHB, white, flat back, table top and wall hung including CI brackets, bottel trap, CP basin mixture of single lever, wall mounted consisting of operating lever, cartridge sleeve, wall flange, nipple & spout, all nessesary fitting and fixture complete all as specified and as directed. |
| 24 | S&F in repairs chromium plated towel ring square with round flange complete all as specified and as directed. |
| 25 | S&F chromium plated grab bar (stainless steel) with round flange complete all as specified and as directed. |
| 26 | S&F vitreous china white wash down water closet wall hung with flushing cistern, hush seat cover and internal fittings with fixing bolts and making all necessary connections complete all as specified and as directed. |
| 27 | S&F in repairs CP hand shower (faucet) fancy type with one meter flexible tube with wall hook complete all as specified and as directed. |
| 28 | Dismangling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceavble tiles from site and rubish off the premises complete all as specified and as directed. |
| 29 | M&L for non-skid/ anti skid matt finish coloured ceramic floor tiles 7 to 8 mm thick area of each tile exc. 0.18 sqm but n exc 0.38 sqm in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles including of 15 mm thick screed bedding in CM (1:4), complete all as specified and as directed. |
| 30 | M&L for double charge colour vitrified ceramic tiles 10mm thick (square/ rectangular) dark/light shade polished area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm in floor, set and jointed in neat cement slurry and pointed in white or colour cement to match with and including of 15 mm thick screed bedding in CM (1:4), complete all as specified and directed. |
| 31 | All as per BOQ Serial item No.30 above but in vertical surfaces such as skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 10mm thick rendering in CM (1:3) as backing coat, complete all as specified and directed. |
| 32 | M&L for granite slab (of any type) 18-20 mm thick work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade with & including 15mm thick rendering/screed bed in CM (1:4) as backing coat, complete all as specified and directed. |
| 33 | M&L for rendering 15mm thick plaster in CM (1:4) on fair faces of brick or concrete surface of wall and finished even and smooth without using extra cement, complete all as specified and directed. |
| 34 | M&L for rendering 15 mm thick on fair faces of brick work in cement mortar (1:6) and finished the surfaces even and smooth without using extra cement complete all as specified and directed. |
| 35 | All as per BOQ Serial item No 34 above but 5mm thick in CM (1:3) as In celling complete all as specified and as directed. |
| 36 | Demolition of brick work or stone /boulder masonry built in cment mortar or cement lime mortar including removal of debris outside MoD land complete all as specified and directed |
| 37 | M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in CM (1:6) complete all as specified and directed. |
| 38 | M&L for brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in CM (1:4) complete all as specified and as directed. |
| 39 | Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets etc. including removal of debris outside MoD land complete all as specified and as directed. |
| 40 | M&L for false ceiling with 4 mm thick high pressure steam curd (HPSC) no asbestos building boards fixed over GI poweder coating white or framed work GI grid consisting of main Tee section of size (15mm x 30mm), cross Tee section of size (15mm x 23mm), and powder coating GI wall angle of size (20mm x 20mm) suitable for mounting tiles of 595 x595 mm with 1.5 mm dia GI wire suspended including fabrication complete as per manufacturers instructions fixed with steel rawl plug with nut and bolts arrengement with gred size 60 x 120 cm complete all as specified and as directed. |
| 41 | M&L for POP cornice width n.exc 200mm wide in ceiling edge of any design and shape complete all as specified and as directed. |
| 42 | S&F in repairs coloured aluminium composite sheets to steel/aluminium frames including necessary fittings and fixtures etc complete all as specified etc complete all as specified etc complete all as specified and as directed. |
| 43 | Dismantling and removing all unsound/weak concrete materials from slabs , lintel,chajja, fin, facia etc. by any means as directed by engr-in-charge including tapering all edges, making square shoulders of cavities air or sand blasting etc and cleaning of exposed concrete surface of lightly picking materials by air blasting or sand blasting incl foreign matrials , loose concrete/aggregate etc including removal of debris outside MoD land for 25mm average thickness complete all as specified and as directed.Note: Work shall be carried out to bldgs with height upto 4 storey. |
| 44 | M&L for removing of concrete all around reinforcement including from behind the reinforcing bars to give an avrage 25 mm (but not less than 15 mm clear air gap) by manual methods (using wire brushing, chiselling etc) and applying alkaline rust removing chemical followed by removing rust by emery paper and cleaning the area throughly by water and allow it to dry all as per manufacturer,s instruction to give it a totally rust free finished steel surface (Make: SIKA/FOSROC or equivalent make as approved by GE) upto 12 mm dia bar complete all as specified and as directed.Note: Work shall be carried out to bldgs with height upto 4 storey. |
| 45 | Prepration of existing reinfoecement surface by brush and M&L for application of two coat of Epoxy Zinc rich primer on the prepared steel surface excluding behind the bar by brush the primer shall have a minimium specific gravity 1.75 minimum weight minimum adhesive bond strength with steel is 1.5N/mm2 complete all as specified and directed. Make: SIKA/FOSROC or equivalent make as approved by GE. Note: Work shall be carried out to bldgs with height upto 4 storey. |
| 46 | M&L for providing single coat of epoxy bond adhesive of prepared non metallic surface (existing surface) and applying by brush all as per manufactures instruction/specification. The bonding agent shall have minimum compressive strength of 40 N/Sqmm and complete all as specified and as directed.Note: Work shall be carried out to bldgs with height upto 4 storey. |
| 47 | M&L for introducing new reinforcement bars up to 12mm dia for structural connections in RCC Bram, Lintels, Columns and slabs uncluding power drilling holes of appropriate diameter in reinforced of plain cement concrete to a minimum depth of 150 mm and upto 200 mm including power drilling , fixed the reinforcement in position using epoxy of loose dust by blowing air, sealing with epoxy cartridges etc complete all as specified and as directed.Note: Work shall be done in bldgs with height upto 10 storey. |
| 48 | Supply, mixing and applying at two component structural grade polymer modified reinstatement morter, up to the thickness of 15mm over a coat of epoxy resin boanding agent as per manufacturer instruction where local spalling has taken place or shuttering is not possible . The morter can be applying in layers not exceeding 6mm thick in each layer in and upto any thickness in smaller vertical pockets and upto any thickness in horizontal applications. The mortar should have a minimium compressive strength 12N/mm2 in 1 day and 45N/mm2 in 28 days. Minimum flexural strength should be 8 N/mm2 in 28 days. A modified styrene butadience emulsion for use as a bonding aid and gauging liquid for cementious system to be mixed with cement slurry before the application of modified polymer mortar to be used @ 6 ltr/bag of cement. The bonding agent should have minimium compressive strength 24N/mm2. Minimum tensile strength 3.5N/mm2, minimium flexural strength 6.5N/mm2 upto 25 mm average thickness complete all as specified and as directed.Make :- Sika/Fosroc or equivalent make as approved by GENOTE:- (i) Cement and sand morter in proportion of 1:2 graded coarse sand) with polymer admixed in proportions approved). (ii) Work shall be carried out to bldgs with height upto 4 storey. |
| 49 | M&L for supply, mixing and placement of micro concrete cement based prepacked single component chloride free sulphate free, non-shrink, free flow etc compacting, ready to use after mixing water in specified portion and in required thickness as per manufacturer instruction including necessary form work . compressive strength (ASTM C 109,cm cube ) of 35 MPa at 28 days including application curing compound at various location in bldg complete all as specified and as directed.Note: Work shall be carried out to bldgs with height upto 4 storey. |
| 50 | M&L for applying of high efficiency polymeric resin base film forming curring compound or equivalent, over concrete surface with max coverage area 5.0 sqm per liter as per manufactures instructions, complete all as specified and as directed.Note: Work shall be carried out to bldgs with height upto 4 storey. |
| 51 | S&F Mild steel framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 including necessary scafolding required complete all as specified and directed |
| 52 | S&F Welded steel wire fabric; weight per square meter exc 4kg fixed complete to wood or steel members including necessary scafolding required complete all as specified and directed |
| 53 | Taking down carefully copper/aluminium point wiring (light,fan,socket etc.) complete including fittings such as switch, ceiling rose, light fittings, regulators etc. and making good to the disturbed surface of walls, floors etc. including removal of debris outside MoD landcomplete all as specified and as directed. |
| 54 | M&L for point wiring for light/fan controlled by one switch with 1.5 sqmm single core 1100v grade FRLSH PVC insulated unsheathed multistranded copper conductor with and including PVC concealed conduit of medium grade with all fittings including galvanized pressed steel sheet (1.0mm thick) sunk modular box with suitable module cover plate for mounting modular switches, sockets, fan regulators etc. including 1.5 sqmm single core 1100v grade FRLSH PVC insulated unsheathed multistranded copper conductor as earth continuity conductor connected to common earth dolly and including concealing of conduits in walls / floors / ceilings etc. and making good disturbed surface to matching with the surrounding surfaces complete all as specified and as directed .Note: Colour coding of wiring is to be maintained as per standard colour code. |
| 55 | All as per BOQ Serial item No.54 above but of one bell point controlled by one bell push with cables of 1.5 sqmm size complete all as specified and as directed . |
| 56 | All as per BOQ Serial item No. 55 above but for 6 Amps Socket on same board complete all as specified and directed. |
| 57 | All as per BOQ Serial item No. 55 above but for 6 A socket point on independent board complete all as specified and directed. |
| 58 | All as per BOQ Serial item No. 55 above but for 15 A socket point independent with 2.5 sqmm 1100V grade FRLSH PVC insulated copper conductor complete all as specified and directed. |
| 59 | S&F modular type switch, one way 6 Amps, 1 module complete all as specified and as directed. |
| 60 | S&F modular type socket 5 pin, 6 Amps, 2 module complete all as specified and as directed. |
| 61 | S&F Modular type socket 5 pin, 16 Amps, 2 module complete all as specified and as directed. |
| 62 | S&F Modular type switch, one way 16 Amps, 1 module complete all as specified and as directed. |
| 63 | S&F Modular type fan regulator step type (2 module)120 Watt complete all as specified and as directed. |
| 64 | S&F Modular type, 5 Amps, bell push switch complete all as specified and as directed. |
| 65 | S&F in repairs for modular cloured/white cover plate with frame 2 module complete all as specified and directed. |
| 66 | S&F in repairs modular cloured/white cover plate with frame 3 module complete all as specified and directed. |
| 67 | S&F in repairs modular cloured/white cover plate with frame 4 module complete all as specified and directed. |
| 68 | S&F in repairs modular cloured/white cover plate with frame 6 module complete all as specified and directed. |
| 69 | S&F in repairs modular white cloured/cover plate with frame 8 module complete all as specified and directed. |
| 70 | S&F in repairs modular white cloured/cover plate with frame 12 module complete all as specified and directed. |
| 71 | S&F in repairs modular white cloured/cover plate with frame 16 module complete all as specified and directed. |
| 72 | S&F in repairs modular white cloured/cover plate with frame 18 module complete all as specified and directed. |
| 73 | S&F in repairs modular metal flush box 1 / 2 module complete all as specified and directd. |
| 74 | S&F in repairs modular metal flush box 3 module complete all as specified and directd. |
| 75 | S&F in repairs modular metal flush box 4 module complete all as specified and directd. |
| 76 | S&F in repairs modular metal flush box 6 module complete all as specified and directed. |
| 77 | S&F modular Metal flush box 8 module complete all as specified and as directed. |
| 78 | S&F modular Metal flush box 12 module complete all as specified and as directed. |
| 79 | S&F modular Metal flush box 16 module complete all as specified and as directed. |
| 80 | S&F modular Metal flush box 18 module complete all as specified and as directed. |
| 81 | Dismantling and taking down carefully sub-main wiring any size including wooden batten etc and making good the disturbed surfaces of wall/ floor to match the existing wall/ floor etc including removal of debris outside MoD land complete all as specified & directed. |
| 82 | M&L for circuit/sub-main wiring with two run of 1100 V grade PVC insulated & unsheathed 4.0 Sqmm single core multi stranded copper conductor cable alongwith one run of 4.0 Sqmm 1100 V grade FRLSH PVC insulated & unsheathed single core multi stranded copper conductor cable for earth continuity conductor connected to common earth dolly, drawn through concealed PVC conduit complete all as specified and as directed. Note : Three runs of 4.0 Sqmm cable shall measured as one length. |
| 83 | S&F PVC conduict pipe 25mm dia with accessories like tee, long bend, elbow for wiring complete all as specified and directed. |
| 84 | S&F PVC conduict pipe 32mm dia with accessories like Tee, long bend, elbow for wiring complete all as specified and directed. |
| 85 | M&L for cutting chases by mechanical means, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth complete all as specified and directed. |
| 86 | S&F Fancy type LED mirror light fitting with PVC body having high out put diffuser 2 feet, 8-15 watt 220 V AC decorative type with inbuilt driver and LED lamp as per sample provided including connecting up with three core flexible copper conductor cable of 0.75sqmm size complete all as specified and as directed. |
| 87 | S&F round LED luminaire warm white 18 watt, 220 V AC recessed type with high efficiency diffuser soft glare free light complete with inbuilt driver, suitable for roof ceiling cutout 95 mm dia including connecting up with driver three core flexible copper conductor wire of 0.75 Sqmm size complete all as specified and as directed. |
| 88 | S&F LED luminaire 12 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with inbuilt driver, suitable for roof ceiling cutout 85 mm dia including connecting up with driver three core flexible copper conductor wire of suitable size complete all as specified and as directed. |
| 89 | S&F Exhaust fan 230-250 mm sweep, with polycorbonate blades 230 volts 50 Hz single phase including louvres & shutters nuts and bolts complete including modification of existing hole (if required) complete all as specified and as directed. |
| 90 | S&F decorative type LED aesthetically designed wall bracket light in SS Housing, Glass and B22/E27 suitable for 9 W LED bulb complete with necessary connection with point wiring complete all as specified and as directed. |
| 91 | S&F decorative wall reading light 3-5watt swing arm brushed brass with switched LED lamp modern bedroom wall sconce mount for home décor bedside lighting fixtures indoor type complete all as specified and directed. |
| 92 | Supply, installatioin, commissioning and testing of Split type Air Condtioner of 1.5 TR (4535 Kcal/Hr) capacity, digital inverter type, with cordless remote control unit with LCD/LED display, 5 star rating and EER of 3.2 and above. Indoor unit Hi wall mounted type suitable for 230 volts, 50 Hz, single phase AC supply and capable of performing the function as cooling, heating, air circulating and filtering. Outdoor unit of the air conditioner shall be fitted with discharge cool type rotary/ scroll compressor operating on non-CFC refrigerants with over load protection and mounted on resistant mountings for quite operation. The filters packs provided shall be washable. Remote cordless control shall be provided with ON/OFF timer, fan speed selector (min 3 speed), mode selector (cooling/fan) and setting -up of temperature. Display of temperature and mode shall be provided on indoor unit and on handset. Overall power factor of the unit shall not be less than 0.85 at operating conditions complete all as specified and as directed.Note :- The installation shall include mounting/ fitting indoor and outdoor unit on wall with suitable bracket etc. at respective locations. Laying refregerent piping, extension of drain pipe upto 6 mtr length and connecting both units after drilling holes, putting PVC sleeve, sealing and finshing the same duly matched with adjoining surface. Refrigerant pipe shall be insulated with expanded polythylene foam not less than 5mm thick. Leak testing of the entire system after installation to be carried out. Rate quoted will include Charging refrigerant gas in the unit, suitable electric connection between indoor and outdoor unit (upto 6 mtr) and upto switch (upto 3 mtr) |
| 93 | M&L for modular metal flush box 2 module one complete all as specified and directed. |
| 94 | M&L for modular white cover plate with frame 2 module complete all as specified and directed. |
| 95 | S&F modular type 32 A Motor starters white colour complete all as specified and as directed. |
| 96 | S&F modular type 10/25 A 3 Pin Shuttered Socket white colour complete all as specified and as directed. |
| 97 | S&F 25 A 3 pin plug top complete all as specified and as directed. |
| 98 | M&L for circuit/sub-main wiring with two run of 1100 V grade PVC insulated & unsheathed 6.0 Sqmm single core multi stranded copper conductor cable alongwith one run of 6.0 Sqmm 1100 V grade FRLSH PVC insulated & unsheathed single core multi stranded copper conductor cable for earth continuity conductor connected to common earth dolly, drawn through concealed PVC conduit complete all as specified and as directed.Note:(i) Three runs of 6.0 Sqmm cable shall measured as one length.(ii) Cutting chases, pinning in, making good to facings etc is deemed to be included in the quoted unit rate. |
| 99 | Supply and laying out of copper refregerent pipe 5/8\\" dia with PUF insulation as per required length at site complete with brazing and flaring nuts of suitable size (brass) complete all as specified and as directed. |
| 100 | Supply and laying out of copper refregerent pipe 1/4\\" dia with PUF insulation as per required length at site complete with brazing and flaring nuts of suitable size (brass) complete all as specified and as directed. |
| 101 | Supply and laying out of suitable size of drain out pipe of indoor unit of Split AC complete all as specified and directed. Please Enable Macros to View BoQ information |
