|
| 1 | Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete including disposal of unservicable rubbish outside Cantt area all as specified and directed by Engineer-in-Charge. |
| 2 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete including disposal of unserviceable rubbish outside cantt area all as specified and directed by Engineer-in-Charge. |
| 3 | Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets from any position complete including disposal of unserviceable rubbish outside cantt area all as specified and directed by Engineer in Charge. |
| 4 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete including disposal of unservicable rubbish outside Cantt area all as specified and directed by Engineer-in-Charge. |
| 5 | Demolition of brick work or stone/boulder masonary built in cement mortar incl all quions arches, pillar or any other descrption etc complete including disposal of unservicable rubbish outside Cantt area all as specified and directed by Engineer-in-Charge. |
| 6 | Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc, removing rubbish off the premises complete all as specified and directed by Engineer-in-Charge. |
| 7 | Demolition of cement concrete (unreinforeced) of any description and in any position complete including disposal of unserviceable rubbish outside cantt area all as specified and directed by Engineer in Charge. |
| 8 | Taking down Cement plaster or cement lime plaster on brick or concrete walls including raking out joints, hacking for key & scrubbing down with water etc including disposal of unservicable rubbish outside Cantt area all as specified and directed by Engineer-in-Charge. |
| 9 | Taking down chowkhats with shutters (without taking off shutter from frame) n exc 1.5 Sqm each with mongry including Cutting holes into through brick wall and making good to dismantled portion in CM (1:3) or PCC (1:2:4) complete all as specified and as directed. |
| 10 | Taking down chowkhats with shutters (without taking off shutter from frame)exc 1.5 Sqm but n exc 4 sqm each with mongry including Cutting holes into through brick wall and making good to dismantled portion in CM (1:3) or PCC (1:2:4) complete all as specified and as directed. |
| 11 | Taking down eaves gutters and rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., and removal from site complete all as specified and directed by Engineer-in-Charge. |
| 12 | Repairing of concrete chajjas,facias,columns and the like by providing PCC (1:2:4) type B-0 thickness 15 to 20 mm as required including all necessary formwork and provosion of rendering 10 mm thick (average thickness) in cement mortar 1:3 with chicken wire mesh after applying a coat of cement slurry @ 3 Kg/sqm of surface finished even and fair in patches including two coats of weather coat Apex paint over a coat of primer including taking down swollen/damaged plaster or concrete complete all as specified and directed by Engineer-in-Charge. |
| 13 | 75 mm thick Cement concrete (1:4:8) type D-2,using 40 mm graded mechanically crushed stone aggregate as in sub base of floor and pavings etc. complete all as specified and directed by Engineer-in-Charge. |
| 14 | 75 mm thick, cement concrete type C-2, 1:3:6 using 20 mm graded stone aggregate, finished even & smooth without using extra cement, as in plinth protection, complete all as specified.Plinth protection shall be laid in 1:20 slope and joint filling sealed with bituminous sealing compound grade \\"A\\" . |
| 15 | 25 mm thick Cement concrete (1:2:4) type B-0,using 12.5 mm graded mechanically crushed stone aggregate as in levelling concrete etc. complete all as specified and directed by Engineer-in-Charge. |
| 16 | Plain cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate as in cills, steps; seismic and other similar bands, plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height,copings, kneelers, apex stones,bed plates,mud stops, kerbs , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed rounded or chamfered on edges with and including using necessary use and waste of formwork for fair finished surface complete all as specified and directed by Engineer-in-Charge. |
| 17 | Machine cut Kota stone slab flooring 20-25 mm thick,SIZE 55 CM x 55 cm laid over & including 20 mm thick screed bed in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing (mirror finish) complete all as specified and directed by Engineer-in-Charge. |
| 18 | Machine cut Kota stone slab 20-25 mm thick as in skirting, dado and pillars etc , laid over & including 10 mm thick rendering in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing (mirror finish) complete all as specified and directed by Engineer-in-Charge. |
| 19 | Machine cut Granite of any typetiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone in floor, cooking platfrom, windows cill, step 7 riser etc. including grinding and polishing complete (cut to size in square shape) laid over & including 20 mm thick (average thickness) cement mortar (1:30 screed and jointwed with grey cement slurry mixed with matching shade pigment including rubbing and polishing (Granite finish0, complete all as specified and directed. |
| 20 | Providing edge moulding to 18-20mm thick Granite stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete. all as specified and directed by Engineer-in-Charge. |
| 21 | Brick work with sub class 'B' bricks, class designation 100, old size bricks, straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge. |
| 22 | Rendering 15 mm thick in cement mortar 1:6 on other than fair face of brick or concrete surfaces finished even and smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge. |
| 23 | Rendering 15 mm thick in cement mortar 1:4 on on fair faces of brick or concrete surfaces etc mixed with water proofing compound finished even and smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge.NOTE: Water proofing compound shall be measured and paid separately. |
| 24 | Supply only liquid water proofing comound ISI Marked complete all as specified and directed. |
| 25 | First quality Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in floors etc. set and jointed with 4 mm spacer and grouting the joint of flooring with epoxy grout mix of organic coated filler of desired shade,hardener ,resin in the ratio of 8:1:2 laid over and inculding 15 mm thick screed in cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge. |
| 26 | First quality Non - skid coloured Ceramic tiles 7 to 8 mm thick as in vertical surface such as skirting, dado etc.area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm. set and jointed with 4 mm spacer and grouting the joint of flooring with epoxy grout mix of organic coated filler of desired shade,hardener ,resin in the ratio of 8:1:2 laid over and inculding 10 mm thick screed in cement mortar (1:3) complete all as specified and directed by Engineer-in-Charge. |
| 27 | Rubber coated Chequered cement concrete tiles 30mmx30mmx25mm thick with grey cement and pigment, over and including 15 mm thick screed in Cement mortar 1:6 set jointed and pointed in neat cement slurry in floors complete, all as specified and as directed by Engineer-in-Charge. |
| 28 | Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, fixed with self tapping screws,hooks etc complete all as specified and as directed by Engr-in-charge.Colour to be decided by GE |
| 29 | Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws,hooks etc complete all as specified and as directed by Engr-in-charge.Colour to be decided by GE |
| 30 | Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with stainless steel wire staples complete all as specified and directed by Engineer-in-Charge. |
| 31 | Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with stainless steel wire staples fixed in repairs complete all as specified and directed by Engineer-in-Charge. |
| 32 | 35 mm thick factory made glazed & Skeleton shutters of 2nd class Hardwood open rebated & prepared to receive glass or gauze etc without sash bar open rebated with edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass or guage etc size ofstiles rails etc as specified in sec 8 clause 8.24 (a) of SSR Part-I (2009) complete all as specified and directed by Engineer-in-Charge. |
| 33 | 35 mm thick factory made Flush shutters, solid core construction, with particle core and plywood face panels, commercial type on both sides face covered with decorative face veneer with lipping/frame to match with 1 mm thick mica supplied and fixed complete all as specified and directed by Engineer-in-Charge. |
| 34 | Factory made Pressed steel frames, confirming to IS, having profile 125 x 60 mm , 1.25 mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, and 100 mm size hinges, lock strike plate, etc., with one shop coat of zinc chromate primer and fixing complete all as specified and directed by Engineer-in-Charge. |
| 35 | Factory made box type steel windows with pressed steel frame min 1.25 thick complete including mild steel acessories like lugs, door stopper, holdfasts, pintol hinges, handles( minimum One for each shutter), and ISI marked tower bolt 150mm size (minimum 2 for each shutter) etc. with glazing bars and without glazing bars (Double shutter) dovetailed or welded with one shop coat of zinc chromate primer, complete all as shown on drawing No. TD-276(R), Sheet No 1/4 to 2/4, 3/4, 4R/4 and as specified and directed by Engineer-in-Charge.Note: (i) Fabrication as per TD-276 (R) SH 1/4 to 2/4, 3/4, 4 (R) /4(ii)Mode of measurement Unit will be for the complete window except Glass/ Gauge but incl fittings, ISI marked iron mongery complete as per TD. (iii) The PCC back filling in chowkhat of window, Grills,Sheet glass and wire gauge will be measured and paid separately against respective items. |
| 36 | Mild Steel Framed work as in guard bars/grills, gratings, etc.. with ends of bars shouldered/welded and/or riveted, or forged into spikes; framed guard bars/grills conforming to Fe-290 (Gde E-165) complete all as as specified and directed by Engineer-in-Charge. |
| 37 | Supply and fixing Fe 410-W (Gde E-250) quality A Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240. |
| 38 | Preparation of surfaces of walls brooming down, applying one coat of white cement based wall care putty after applying emery paper or sand paper and two coats of weather proof emulsion paint(Ist quality) Apex (internal/ external wall surfaces over a coat of primer damp shealth per manufacturers instructions etc complete all as specified and directed by Engineer-in-Charge. |
| 39 | Preparation of new plastered surfaces of wall and applying two coats of acrylic emulsion on walls over a coat of primer and 1mm JK wall care putty on wall surface including preparation of surface complete all as specified and directed. |
| 40 | Complete removal of existing surface and applying two coats of acrylic emulsion over and including a coat of primer and 1 mm JK wall care puty on wall surfaces, complete all as specified and as directed. |
| 41 | Complete removal of existing treatmen,preparation of surfaces of walls brooming down, applying one coat of white cement based wall care putty after applying emery paper or sand paper and two coat of weather proof emulsion paint(Ist quality) Apex (internal/ external wall surfaces over a coat of primer damp shealth per manufacturers instructions etc complete all as specified and directed by Engineer-in-Charge. |
| 42 | Preparation of new or previously untreated steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge. |
| 43 | Preparation of old steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge. |
| 44 | Preparation of old wooden surface of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge. |
| 45 | Preparation of new or previously untreated wooden surface of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed by Engineer-in-Charge. |
| 46 | Supply and fixing in PVC prelaminated Gypsum Ceiling board 9mm thick with and including anodised aluminium snap grid framework for ceiling having grid size 605 x 605 mm comprising of wall angle of size 25 mm x 25 mm x1.3 mm,main runner of size 38 mm x 26 mm x1.3 mm. The grid system shall be suspended at every 1200 mm c/c in both directions by using 3.5 mm dia aqualine wire fixed to purlin or RCC roof with suitable fasteners to withstand the load of grid system with ceiling board complete all as specified and as directed by Engr-in-charge.Colour to be decided by GE |
| 47 | Sheet glass 4mm thick, ordinary quality and glazing with silicon sealant & spring glazing clips using Silicon for fixing of glass in addition to glazing putty, in squares not exceeding 0.5 Sq. mtr in each pane complete all as specified and directed by Engineer-in-Charge. |
| 48 | Supply and fixing in reapir stainless steel curatin rod of dia not less than 25 to 30mm of Gde-I quality with fixing brackets, stops and rollers etc as approved by GE complete all as specified and directed. |
| 49 | Supply and fixing in reapir stainless steel knob of Gde-I quality suitable of 25 to 30 mm dia for curtain rod complete as approved by GE complete all as specified and directed. |
| 50 | Supply and fixing mild steel helical door spring MS 300mm long ordinary rat tail pattern spring including roller & roller plate complete fixed to wooden/steel chowkats complete all as specified and directed by Engineer-in-Charge. |
| 51 | Aluminium anodised,barrel tower bolts of extruded section with length of bolt 150 mm and dia of bolt not less than 10 mm,ISI marked complete all as specified and directed by Engineer-in-Charge. |
| 52 | 300 mm long,Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified & directed by Engineer in Charge. |
| 53 | Floor door stopper of aluminium alloy body and tongue, anodised,with hard drawn steel spring,fixed in floor with overall length of cover plate 140 mm complete all as specified and directed by Engineer-in-Charge. |
| 54 | 150 mm long extruded Aluminium alloy handles powder coated fabricated type complete all as specified and directed by Engineer-in-Charge. |
| 55 | 150mm bore, PVC (SWR) eaves gutter half square complete all as specified and directed by Engineer-in-Charge. |
| 56 | 110 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches, floors & fixed to walls with and including MS clamps made out of flat iron of size 25 mm x 3 mm including nuts,bolts complete all as specified and directed by Engineer-in-Charge. |
| 57 | PVC(SWR) bends (any radius), for 110mm bore pipes, with/ without access doors, complete all as specified and directed by Engineer-in-Charge. |
| 58 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed. |
| 59 | Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-40 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed. |
| 60 | INTERNAL ELECTRIC SUPPLY WORKS |
| 61 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including ,fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. all as specified and directed. |
| 62 | Taking down carefully copper/ aluminium sub main wiring complete, including existing batten/ conduit etc. removing materials deposited in store for keeping in safe custody and making good disturbed surfaces of walls, floors etc. complete all as specified and directed. |
| 63 | Dismantling of ceiling fans,scrapping of old paint,Painting of ceiling fans complete, in situ with two coats of synthetic enamel paint over a coat of anti- corrosive zinc red oxide by spraying including filling cavities with filler, one coat after cleaning all dust etc,replacement of rubber bush,nuts,bolts,washers,split pin,down rod,copper flexible cable all as specified and directed. Please Enable Macros to View BoQ information |
| 64 | Dismantling of ceiling fans,scrapping of old paint,Painting of ceiling fans complete, in situ with two coats of synthetic enamel paint over a coat of anti- corrosive zinc red oxide by spraying including filling cavities with filler, one coat after cleaning all dust etc,replacement of rubber bush,nuts,bolts,washers,split pin,down rod,copper flexible cable all as specified and directed. Please Enable Macros to View BoQ information |
