|
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but including backing), rubbish off the premises complete all as specified and/or as directed.. |
| 2 | Material & Labour 25mm thick PCC 1:2:4 type B-0 using12.5mm graded stone aggregate as in flooring and finished surface as in received tiles complete all as specified and as directed. |
| 3 | M&L for glazed ceramic white tiles in vertical surfaces of size 450x350x7mm/ 350x250x7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including rendering 10 mm thick in cement mortar (1:4) as in backing coat complete all as specified and/or as directed.. |
| 4 | M & L for Non - skid coloured Ceramic joint free tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and/or as directed.. |
| 5 | Taking down Shutters of any description exc 1 sq. m and n exc 2 sq. m each complete all as specified and as directed. |
| 6 | M&L 2nd class soft wood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and as directed.. |
| 7 | Hacking out old broken glasses (Any thickness, size quality, description) from wooden or steel frames fixed with putty or wooden beads. |
| 8 | M&L for plain sheet glass 4.80 mm thick ordinalry quality and glazing with oil putty or wooden beads in square or fixed with aluminium section including rubber beads not exc 0.50 sqm in each pane complete all as specified and as directed.. |
| 9 | S&Fin repair Door closer hydraulically regulated designation No 3 universal type, aluminium body suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed and fixed complete all as specified and directed. |
| 10 | Taking down cement plaster on brick/pcc block or concrete surfaces including racking out joints hacking for key, scrubbing down with water etc., complete all as specified and/or as directed. |
| 11 | M&L rendering 15mm thick in CM 1:4 on fair faces of concrete or brick surfaces as in wall finishes even and smooth w/o using extra cement complete all as specified and/or as directed. |
| 12 | M&L rendering 15mm thick in CM 1:6 on other than fair faces of concrete or brick surfaces as in wall finishes even and smooth w/o using extra cement complete all as specified and/or as directed. |
| 13 | M&L for Preparing newly plastered surfaces of walls and applying two coats of acrylic emulsion paint over a coat of primer over a coat of wall care putty applied till the surface is smooth etc. complete all as specified and/or as directed.. |
| 14 | Demolition of cement concrete (un reinforced ) in ground floors and pavings n.exc 15cm thick (below or above ground level ) all as specified and removing debris ouside MD land. |
| 15 | S& F 1000 ltr capacity rotational moulded polythelene water storage tanks triple layer white colour (cylindrical vertical with clossed top) hoisted and fixed in position all as specified in SSR Part 1 complete all as specified and directed . |
| 16 | Dismantling of water tank of any description capacity exc 500 ltr and not exc 1000 ltr complete all as specified and directed.. |
| 17 | Taking up or down steel tubing 25mm to 32 mm bore including cleaning for refixing or removal to store, complete all as specified and/or directed.. |
| 18 | S&F 25mm bore 3-layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass treaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified. |
| 19 | Dismantling of 75 / 110mm bore cast iron ,PVC or reinforced concrete pipes jointed in cement mortar and taking out of trenches if reqd of any dia |
| 20 | S&f 75 mm bore PVC (SWR) pipe single socketed , in any length with rubber joints laid in trenches or in floors. |
| 21 | S&f 110 mm bore PVC (SWR) pipe single socketed , in any length with rubber joints laid in trenches or in floors. |
| 22 | S&f 75mm bore PVC (SWR) pipe bends any radius |
| 23 | S&F PVC (SWR) 110mm bore bends any radius, complete all as specified |
| 24 | S&F PVC (SWR) 110mm bore junction single (single T), complete all as specified |
| 25 | S&F 75mm bore PVC (SWR) junction single, (Single T) equal or unequal |
| 26 | M&L 75 mm bore PVC (SWR)) multi floor trap with grating including jointing with solvent cement |
| 27 | S&F PVC (SWR) 75mm bore vent cowl complete all as specified |
| 28 | S&F PVC (SWR) 'S' trap 110mm bore for EWC/IWC |
| 29 | S & F single piece wall hung EWC (fixed in repair) with fixing accessories of size 610x480x195mm, with full pedestal complete all as specified and as directed |
| 30 | S&F in repairs for viterous china wash hand basin flat back size 600x480 mm excluding taps, waste , chain , plug and porcelain stopper incl brackets,complete all as specified. |
| 31 | S&F in repairs 20mm bore stop cock fancy type chromium plated cast copper alloy screw down under high pressure with handle screwed both ends for iron pipe or brass ferrule. |
| 32 | S&F in repair pillar tap fancy type double lever tall body with 150 mm extension body fixed on granite top for supply of hot or cold water fixeing with washers complete all as specified and directed. |
| 33 | S&F in repair hand shower ( health faucet ) CP with 6-8 mm dia. and 1-1.5 metre long flexible tube and wall hook complete all a specified and directed. |
| 34 | S&F in repair chromium plated coloured/stainless steel paper holder fixed on walls complete all as specified and directed . |
| 35 | S&F in repair angle valve (one way) 15 mm bore cast copper alloy fancy type, cromium plated with cup complete all a specified and directed . |
| 36 | S&F in repair chromium plated brass bib tap fancy type screwed down ,screwed for iron pipe or for brass ferrule 15 mm bore complete all as specified and directed. |
| 37 | S&F in repair glass shelf corner in shape of arc/semicircle/triangular fixed on walls with screws complete all as specified and directed. |
| 38 | S&F in repair chromium plated/ powder coated towel rack( 1-3 horizontal runners and 1 runner at bottom and min 2 hangers )fixed to walls with screws complete all as specified and directed. |
| 39 | S&F in repair CP brass towel ring(triangular/rectangular/circular) fixed and incl CP brass screws and complete all a specified and directed (Make Jaquar/ Cera/ Kohler/ ESS/Hindware) or equivalent. |
| 40 | S&F in repair PVC connections 15mm size with CP nuts of length 450-600mm and 3 layer protection of pipe with stainless steel wire mesh and double coated pvc pipe for hot and cold complete all a specified and directed.(Make Jaquar/ Cera/ Kohler/ ESS/Hindware) or equivalent. |
| 41 | S & F in repair bevelled edge mirror of selected quality glass, fixed to wall with chromium plated brass spacer screws and cup wasers complete all as specified and directed. |
| 42 | S&F PVC coated mild steel conduit pipe 25 mm bore (Drapper rod) with a pair of PVC coated MS clamps to hold drapers rod and decoractive attachment at one or both ends of drapers rod, fixed to opening of door/windows (each opening n.exc 1.50m, contained with a pair of clamps and pair of side ornamented attachments), complete all as specified and directed. |
| 43 | S&F Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) |
| 44 | S&F in repairs PVC waste pipe 32mm bore with cup and washers complete on new or old locations.complete all as specified. |
| 45 | Demolition brick work / block masonry or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and/or directed. |
| 46 | Material and Labour precast cement concrete(20mm graded crushed stone aggregate) 1:3:6 type C-1 as in block masonry with solid blocks,exc.10cm in width and setting in cement mortar 1:6, complete all as specified and/or directed.. |
| 47 | S&F in repairs 25mm PP-R Ball valves (brass insert) conforming to ISO 2000 screw down end for PPR pipe or for union and fixed completey as specified for the size 20mm bore, complete all as specified. |
| 48 | Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. complete all as specified dicrect by Engr -In- Charge . |
| 49 | M&L for Granite 16mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite black, complete all as specified |
| 50 | M&L for Providing edge moulding to 18-20mm thick Granite stone of counters vanities including machine polishing to edge to give high gloss finish etc. complete all as specified. |
| 51 | M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed |
| 52 | M& L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces,complete all as specified and directed. |
| 53 | M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) laid on primed surface by forced application complete including dismantling as specified and directed |
| 54 | Dismantling wall and ceiling boards (Fiber, pulp, insulation, blankets) any thickness including covered fillets and supporting members. |
| 55 | S&F wooden panelling on wall/ceiling wall using the following specifications including taking down old wooden panelling complete all as specified and directed:-(i) S&F IInd class hard wood wooden gutties of size 25 mm x 25mm x 200 mm depth fixed in wall by making holes in brick wall and making good in cement mortar 1:3 (1 for cement and 3 for sand)(ii) S&F Horizontal runner II nd class hard wood @ 1.20 mtr C/C of cross sectional area exc 13 Sqcm and 25 Sqcm clean swan with nails or screws, treated with two coats of cerosite oil mixed with good quality pesticide for antitermite treatment. (iii) S&F IInd class hard wood boarding 12 to 15 mm with tongue and groove method of fittings as in wall panelling planed one side, and other side wrought fixed with screws. (iv) S&F IInd class hard wood decorative beading 40 mm wide on top and bottom along perimeter of the wall or as specified. (v) M&L for French polishing on wooden surface any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats till the surface smooth/glossy complete all as specified and directed. |
| 56 | M & L for providing and fixing Gypsum boards 9 mm thick PVC film on the face side and other side metalised polyster flim as in ceilings fixed with screws as per manufacturers instructions including anodised aluminium snap grid frame work of size 605 x 605 mm with anodised aluminium channel supports/ angles/ 'T' (Main tee 35 x 25 x 1.5 mm, cross tee 25 x 25 x 1.4 mm and wall angle 32 x 32 x 2 mm) fixed with screws/ plugs etc including GI suspenders of 4mm dia upto 1200 mm length adjustable clips fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size as per approved pattern and design complete all as specified and directed . |
| 57 | M&L for 7-8mm thick teak wood finish laminated wooden flooring interlocked with each others and its size as directed,over 6 micron polyethylene sheeting over the concrete to minimize moisture migration from the concrete complete all as specified and directed .. Make as per PS. |
| 58 | Dismantling boarding, any description, fixed in any position with nails |
| 59 | Taking down carefully copper/Aluminum point wiring (Light, Fan, Socket or power) complete fitting such as switches, ceiling, regulator, sockets etc removing materials to be store for keeping in safe custody for taking credit and making good disturbed surfaces of walls, floors etc as directed. |
| 60 | M&L for point wiring with copper conductor FRLS cable Multistrand, single core 1.5 Sqmm size for one light point or bell point /Ex: fan Point controlled by one switch including one run of 1.5 Sqmm multistrand PVC copper conductor cable for earth continuity in and including PVC casing and capping of approved size and quality fixed on walls/ceiling including rectangular PVC board heavy duty type for mounting switches /sockets etc complete all as directed and specified. |
| 61 | All as per item No 60 but for 5 Amps Socket outlet in same Board with 1.5 sq mm cable complete all as specified and directed by Engr in Charge. |
| 62 | All as per Item No 60 but for 5 Amps Switch Socket Combination in independent board with 1.5 Sqmm Cable complete all as specified and directed by Engr in Charge. |
| 63 | All as per item No 60 above but for power point 3 pin switch socket 15 Amp with PVC copper conductor cable FRLS multistrand unsheathed 2.5 Sqmm on independent board incl one run 2.5 Sqmm multistrand PVC copper conductor cable for earth continuity in and including PVC casing and capping fixed on wall incl including PVC box 2 mm complete all as specified and as directed by Engr in Charge. |
| 64 | Supply and fixing piano switch single pole one way 6 Amps complete all as specified and directed |
| 65 | Supply and fixing Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal complete all as specified and directed. |
| 66 | Supply and fixing switch socket combination 5 amp-2/3 pin complete all as specified and directed. |
| 67 | Supply and fixing socket outlet 5 amp -2/3 pin complete all as specified and directed. |
| 68 | Supply and fixing in replacement of LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 69 | Supply and fixing in replacement of LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC ( Warm/ white) recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. |
| 70 | S&F in replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 71 | S&F in replacement of old U/S Lamp LED 7 Watt, 230 volts 50 Hz AC complete all as specified and directed. |
| 72 | M&L for ceiling rose surface bakelite 65x50 mm two to three terminals complete all as specified and directed. |
| 73 | M&L for lamp holder PVC/polycarbonate type with back platesuitable for batten fittings complete all as specified and directed. |
| 74 | Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and directed.. |
| 75 | Supply and fix in replacement of exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm sweep all as specified and directed. |
| 76 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louver |
| 77 | S&F in replacement of sheet metal enclosure with socket plug top and MCBs single pole and earth enclosure with a 3 pin and earth plug and socket complete with one MCB 20 Amps, single phase complete all as specified and directed. |
| 78 | S&F in replacement of Old UNSV sheet metal enclosure TPN for DBs with 200 Amps bus bar of 12 way 240 volts with blank plate Double Door all as directed by Engr-in-Charge. |
| 79 | S&F in replacement of Old UNSV sheet metal enclosure SPN for DBs with 200 Amps bus bar of 12 way 240 volts with blank plate Double Door complete all as specified and directed. |
| 80 | S&F in replacement of Old U/S MCB single phase (SP), 6 to 32 Amps 240 Volts C Curve complete all as specified and directed. Make : Iegrand /L&T |
| 81 | S&F in replacement of old MCB SPN,C- curve, 230 volt 63 amp 10KA complete all as specified and directed. |
| 82 | S&F in replacement 415V 10 KA 'B' curve miniature circuit breaker (MCB) of 100 Amps current carrying capacity TPN in the DB complete all as specified and directed. |
| 83 | M&L in replacement for sub main wiring with 2 runs of FRLS PVC insulated multistrand, copper conductor cable of size 10 Sqmm along with one run of 10.0 sqmm PVC insulated cable 1100 volts multi stranded copper conductor as earth wire in and including PVC casing & capping complete all as specified and directed. Please Enable Macros to View BoQ information |
| 84 | M&L in replacement for sub main wiring with 2 runs of FRLS PVC insulated multistrand, copper conductor cable of size 10 Sqmm along with one run of 10.0 sqmm PVC insulated cable 1100 volts multi stranded copper conductor as earth wire in and including PVC casing & capping complete all as specified and directed. Please Enable Macros to View BoQ information |
