|
| 1 | Dismantling floor , hearth or wall tiling including cement mortar bedding (but including backing ) , rubbish off the premises, complete all as specified and directed by engr-in-Charge and removing debris ouside MD land. |
| 2 | Demolition of cement concrete (un reinforced ) in ground floors and pavings n.exc 15cm thick (below or above ground level ), complete all as specified and directed by engr-in-Charge and removing debris ouside MD land. |
| 3 | Material & Labour 25mm thick PCC 1:2:4 type B-0 using12.5mm graded crushed stone aggregate as in flooring and finished surface for received tiles, complete all as specified and directed by engr-in-Charge. |
| 4 | M&L for Glazed ceramic coloured tiles in vertical surface 450x350x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match (Note: Any disturbed surfaces shall be matched w/o any extra cost to the govt) incl 10mm thck screed bed below tile for dado/skirting CM 1:4, complete all as specified and directed by engr-in-Charge. |
| 5 | M & L for coloured, non-Skid Ceramic tiles 7 to 8 mm thick (Square/rectangular ) area of each tile exc 0.06 Sq.m but not exc 0.11 sq m in floors etc set and jointed in neat cement slury and pointed in white or coloured cement to match over and including15mm thick screed bed of bedding layer of mortar in cement mortar 1:4, complete all as specified and directed by engr-in-Charge. |
| 6 | M&L for Vitrified tiles (light shade) 8 mm thick in size of 600mmx600mm as in floors etc set and jointed in neat cement slury and pointed in white or coloured cement to match over and including15mm thick screed bed of bedding layer of mortar in cement mortar 1:4, complete all as specified and directed by engr-in-Charge. |
| 7 | Taking down chowkhat or frame with shutters (without taking of shutters from the frame) exc 1.5 sqm each but not exc 4 sqm each any type of door (wooden, aluminium & steel etc) complete all as specified and as directed by Engr-in-Charge. |
| 8 | Taking down chowkhat or frame with shutters (without taking of shutters from the frame) not exc 1.5 sqm each any type of door (wooden, aluminium & steel etc) complete all as specified and as directed by Engr-in-Charge. |
| 9 | S&F of anodised aluminium door powder coated, frame of door made out of aluminium extruded section 100mmx45mmx2.6mm thick, shutter made out of aluminium extruded section 85mmx45mmx2.1mm thick except bottom rail and lock rail, the section of bottom rail and lock rail 100mmx45mmx2.1mm complete with hydraulic floor mounted door closer, ISI marked, aluminium anodised tower bolt 2 Nos, 5.5mm thick tinted/plane glass pane including reoprene dry rubber gasket set, stainless steel screws, hinges, aluminium anodised snap beading including all necessary fittings and fixtures made out of aluminium anodised complete complete all as specified and directed. |
| 10 | S&F of anodised aluminium sliding glazed window powder coated of two/three track frame of window made out of aluminium extruded section 90mmx30mmx2.6mm/ 60mmx30mmx2.6mm thick, shutter made out of aluminium extruded section 38mmx20mmx1.5mm thick including holdfast, anodised aluminium handle of suitable size, necessary joining cleats, glazing clips, 5.5mm thick tinted/plane glass pane including reoprene dry rubber gasket set, stainless steel screws, hinges, aluminium anodised snap beading including all necessary fittings and fixtures made out of aluminium anodised such as handles, locking arrangements complete complete all as specified and directed. |
| 11 | M&L for plain sheet glass 4.80mm thick ordinalry quality and glazing with oil putty or wooden beads in square or fixed with aluminium section including rubber beads not exc 0.50 sqm in each pane including hacking out complete all as specified and as directed by Engr-in-Charge. |
| 12 | M&L for plain sheet glass 4.80mm thick ordinalry quality and glazing with oil putty or wooden beads in square or fixed with aluminium section including rubber beads exc 0.50 sqm in each pane including hacking out complete all as specified and as directed by Engr-in-Charge. |
| 13 | S&F Door closer hydraulically regulated designation No 3 universal type, aluminium body suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed and fixed complete all as specified and directed. |
| 14 | S&F 2nd hard wood as in plain solid straight chowkhats wrought framed rebated on the solid put together on with glue pinned at joints, complete all as specified and/or as directed by Engr-in-Charge. |
| 15 | S & F 30mm thick 2nd class hardwood, plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkhats, complete all as specified and/or as directed by Engr-in-Charge. |
| 16 | M&L for two coats of synthetic enamel paint over one coat of pink primer on new wooden surfaces including preperation of surfaces, complete all as specified and/or as directed by Engr-in-Charge. |
| 17 | S&F 200 mm long aluminium anodised barrel tower bolt of extruded section, complete all as specified and/or as directed by Engr-in-Charge. |
| 18 | S&F 150mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and/or as directed by Engr-in-Charge. |
| 19 | S&F in 150mm long anodized aluminum door handle cast type, complete all as specified and/or as directed by Engr-in-Charge. |
| 20 | S&F 100mm long mild steel medium weight but hinges cold rolled, complete all as specified and/or as directed by Engr-in-Charge. |
| 21 | Taking down cement plaster on brick/pcc block or concrete surfaces including racking out joints hacking for key, scrubbing down with water etc., complete all as specified and/or as directed by Engr-in-Charge. |
| 22 | M&L rendering 15mm thick in CM 1:4 on fair faces of concrete or brick surfaces as in wall finishes even and smooth w/o using extra cement, complete all as specified and/or as directed by Engr-in-Charge. |
| 23 | M&L rendering 15mm thick in CM 1:6 on other than fair faces of concrete or brick surfaces as in wall finishes even and smooth w/o using extra cement, complete all as specified and/or as directed by Engr-in-Charge. |
| 24 | M&L for Preparing newly plastered surfaces of walls and applying two coats of acrylic emulsion paint over a coat of primer over a coat of wall care putty applied till the surface is smooth etc., complete all as specified and/or as directed by Engr-in-Charge. |
| 25 | M & L for Preparing newly plastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of primer including 1mm thick birla wall care putty, complete all as specified and/or as directed by Engr-in-Charge. |
| 26 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling all as specified and directed. |
| 27 | S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling all as specified and directed. |
| 28 | S&F rolled section as in main and cross beams ,hip and jack rafters , purelins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates Fe -410 Gde E-250, complete all as specified and/or as directed by Engr-in-Charge. |
| 29 | Dismantling structural steel work including doors and gates of any description, complete all as specified and/or as directed by Engr-in-Charge. |
| 30 | S& F 1000 ltr capacity rotational moulded polythelene water storage tanks triple layer white colour (cylindrical vertical with clossed top) hoisted and fixed in position including dismantling all as specified in SSR Part 1 complete all as specified and directed . |
| 31 | Taking up or down steel tubing 25mm to 32 mm bore including cleaning for refixing or removal to store, complete all as specified and/or as directed by Engr-in-Charge. |
| 32 | S&F 25mm bore 3-layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass treaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc, complete all as specified and as directed by Engr-in-Charge. |
| 33 | Dismantling of 75 / 110mm bore cast iron ,PVC or reinforced concrete pipes jointed in cement mortar and taking out of trenches if reqd of any dia |
| 34 | S&f 75 mm bore PVC (SWR) pipe single socketed , in any length with rubber joints laid in trenches or in floors. |
| 35 | S&F PVC (SWR) pipe 110 mm bore single socketed ,in any length with rubber ring joints,laid in trenches or in floors cement complete all as specified |
| 36 | S&f 75mm bore PVC (SWR) pipe bends any radius oval acess all as specified. |
| 37 | S&F PVC (SWR) 110mm bore bends any radius oval acess all as specified |
| 38 | S&F PVC (SWR) 110mm bore junction single (single T), complete all as specified |
| 39 | S&F 75mm bore PVC (SWR) junction single, (Single T) equal or unequal |
| 40 | M&L 75 mm bore PVC (SWR)) multi floor trap with grating including jointing with solvent cement |
| 41 | S&F PVC (SWR) 75mm bore vent cowl complete all as specified |
| 42 | S&F PVC (SWR) 'S' trap 110mm bore for EWC/IWC |
| 43 | S&Fin repair single piece china wash down water closet , with UF soft close seat cover, hinges, accessories set, cistern fittings size, complete all as specified and directed. |
| 44 | S&F in repairs for viterous china wash hand basin flat back size 600x480mm excluding traps, waste , chain , plug and porcelain stopper incl brackets,complete all as specified. |
| 45 | S&F in repair wash hand basin table top type fixed on granite top grooving and cutting if required with coloured sunmica sheet at all over with stainless steel legs at all corners complete all as specified and directed. |
| 46 | Supply only pillar tap fancy type single lever tall body with 150 mm extension body fixed on granite top for supply of hot or cold water fixeing with washers complete all as specified and directed. (Make Jaquar/Cera//ESS/Prayag or equivalent) |
| 47 | S&F in repair hand shower ( health faucet ) CP/PVC(coloured) with 6-8 mm dia. and 1-1.5 metre long flexible tube and wall hook complete all a specified and directed. |
| 48 | S&F in repair chromium plated coloured/stainless steel paper holder fixed on walls complete all as specified and directed.(Make Jaquar/Cera//ESS/Prayag or equivalent) |
| 49 | S&F in repair angle valve (one way) 15 mm bore cast copper alloy fancy type, cromium plated with cup complete all a specified and directed. |
| 50 | S&F in repair chromium plated brass bib tap fancy type screwed down ,screwed for iron pipe or for brass ferrule 15 mm bore complete all as specified and directed. |
| 51 | S&F in repair glass shelf corner in shape of arc/semicircle/triangular fixed on walls with screws complete all as specified and directed (Make Jaquar/Cera//ESS/Prayag or equivalent) |
| 52 | S&F in repair CP brass towel ring(triangular/rectangular/circular) fixed and incl CP brass screws and complete all a specified and directed. |
| 53 | S&F in repair Soap dish(coloured/powder coated) fixed with incl CP brass screws and complete all a specified and directed. |
| 54 | S&F in repair chromimum plated brass 28-32 mm coupling for table top wash hand basin half or full thread with waste pipe of similar dia in pvc/plastic fixed complete all as specified and directed. |
| 55 | S&F in repair PVC connections 15mm size with CP nuts of length 450-600mm and 3 layer protection of pipe with stainless steel wire mesh and double coated pvc pipe for hot and cold complete all a specified and directed. (Make Jaquar/Cera//ESS/Prayag or equivalent) |
| 56 | S & F in repair bevelled edge mirror of selected quality glass, fixed to wall with chromium plated brass spacer screws and cup wasers complete all as specified and directed. |
| 57 | S&F in repair PVC coated mild steel conduit pipe 25 mm bore (Drapper rod) with a pair of PVC coated MS clamps to hold drapers rod and decoractive attachment at one or both ends of drapers rod, fixed to opening of door/windows (each opening n.exc 1.50m, contained with a pair of clamps and pair of side ornamented attachments), complete all as specified and directed. |
| 58 | S&F in repair Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) |
| 59 | S&F in repairs Tubular towel rail, 20mm dia, 60 cm long, CP with a pair of brackets, fixed to wall with CP brass screw and PVC rowl plugs ,complete all as spfd and directed . |
| 60 | S&F in repairs PVC waste pipe 32mm bore with cup and washers complete on new or old locations.complete all as specified. |
| 61 | Demolition brick work / block masonry or stone/ boulder masonry, built in built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles. |
| 62 | Material and Labour precast cement concrete(20mm graded crushed stone aggregate) 1:3:6 type C-1 as in block masonry with solid blocks,exc.10cm in width and setting in cement mortar 1:6, complete all as specified and/or directed. |
| 63 | S&F in repairs Sinks stainless steel with drainage board made of 1.0 mm thick kitchen or laboratory with plugs, washers and wastes; including fixing contilever brackets and connecting union to pipe overall size 915mmx460mm bowl size 410mm x 330mm x 160mm, complete all as specified. |
| 64 | S&F in repair Vitreous China Urinal, Half stall type,white (excluding flushing cistern, flush pipe and waste pipe), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) (back or corner wall type),complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive offixing supply pipe to flushing cistern, trap and waste pipe) |
| 65 | S& F in repair 20 mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed |
| 66 | S&F 25 in repairs PP-R Ball valves (brass insert) conforming to ISO 2000 screw down end for PPR pipe or for union and fixed completey as specified for the size 2 mm bore, complete all as specified. |
| 67 | S&F in repairs 18/19 mm thick PVC solid double side prelam celluca board of approved colour fixed with screws as in modular kitchen cabinets/cupboards including lipping portion match with laminated colour complete all as specified and directed. |
| 68 | S&F 100mm long extruded brass handles, fabricated type polished complete all as specified and directed . |
| 69 | S&F 30mm width of flaps(when open) continous (piano) hinges, brass complete all as specified and directed. |
| 70 | S&F magnetic catcher with 8mm dia ball and brass body and stricking plate complete all as specified and directed. |
| 71 | Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc.Complete all as specified dicrect by Engr -In- Charge . |
| 72 | M&L for Granite 16 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite black, complete all as specified |
| 73 | Dismantling wall and ceiling boards (Fiber, pulp, insulation, blankets) any thickness including covered fillets and supporting members. |
| 74 | M & L Prelaminated particle board 9mm thk fix in walls interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work |
| 75 | S&F in repairs for 2nd class soft wood clean sawn as in scantling fixed with nails including dismantling. |
| 76 | S&F in repairs 2nd class softwood clean sawn as in scantling fixed with nails exceeding 06 Sqcm and n.exc 13 Sqcm in section including dismantling. |
| 77 | M & L for providing and fixing Gypsum boards 9 mm thick PVC film on the face side and other side metalised polyster flim as in ceilings fixed with screws as per manufacturers instructions including anodised aluminium powder coated snap grid frame work of size 605 x 605 mm with anodised aluminium channel supports/ angles/ 'T' (Main tee 35 x 25 x 1.5 mm, cross tee 25 x 25 x 1.4 mm and wall angle 32 x 32 x 2 mm) fixed with screws/ plugs etc including GI suspenders of 6mm dia upto 1200 mm length adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size as per approved pattern and design complete all as specified and directed by Engr-in-Charge. |
| 78 | Taking down carefully copper/Aluminum point wiring (Light, Fan, Socket or power) complete fitting such as switches, ceiling, regulator, sockets etc removing materials to be store for keeping in safe custody for taking credit and making good disturbed surfaces of walls, floors etc as directed. |
| 79 | M&L for point wiring with copper conductor FRLS cable Multistrand, single core 1.5 Sqmm size for one light point or bell point /Ex: fan Point controlled by one switch including one run of 1.5 Sqmm multistrand PVC copper conductor cable for earth continuity in and including PVC casing and capping of approved size and quality fixed on walls/ceiling including rectangular PVC board heavy duty type for mounting switches /sockets etc complete all as directed and specified. |
| 80 | All as per item No 79 but for 5 Amps Socket outlet in same Board with 1.5 sq mm cable complete all as specified and directed by Engr in Charge. |
| 81 | All as per Item No 79 but for 5 Amps Switch Socket Combination in independent board with 1.5 Sqmm Cable complete all as specified and directed by Engr in Charge. |
| 82 | All as per item No 79 above but for power point 3 pin switch socket 15 Amp with PVC copper conductor cable FRLS multistrand unsheathed 2.5 Sqmm on independent board incl one run 2.5 Sqmm multistrand PVC copper conductor cable for earth continuity in and including PVC casing and capping fixed on wall incl including PVC box 2 mm complete all as specified and as directed by Engr in Charge. |
| 83 | Supply and fixing piano switch single pole one way 6 Amps complete all as specified and directed |
| 84 | Supply and fixing Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal complete all as specified and directed. |
| 85 | Supply and fixing switch socket combination 5 amp-2/3 pin complete all as specified and directed. |
| 86 | Supply and fixing socket outlet 5 amp -2/3 pin complete all as specified and directed. |
| 87 | Supply and fixing in replacement of LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 88 | Supply and fixing in replacement of LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC (Warm/ white) recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. |
| 89 | S&F in replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 90 | S&F in replacement of old U/S Lamp LED 7 Watt, 230 volts 50 Hz AC complete all as specified and directed. |
| 91 | M&L for ceiling rose surface bakelite 65x50 mm two to three terminals complete all as specified and directed. |
| 92 | M&L for lamp holder PVC/polycarbonate type with back platesuitable for batten fittings complete all as specified and directed. |
| 93 | Supply and fix in replacement of exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm sweep all as specified and directed. |
| 94 | S&F in replacement of sheet metal enclosure with socket plug top and MCBs single pole and earth enclosure with a 3 pin and earth plug and socket complete with one MCB 20 Amps, single phase complete all as specified and directed. |
| 95 | S&F in replacement of Old UNSV sheet metal enclosure TPN for DBs with 200 Amps bus bar of 12 way 240 volts with blank plate Double Door all as directed by Engr-in-Charge. |
| 96 | S&F in replacement of Old UNSV sheet metal enclosure SPN for DBs with 200 Amps bus bar of 12 way 240 volts with blank plate Double Door complete all as specified and directed. |
| 97 | S&F in replacement of Old U/S MCB single phase (SP), 6 to 32 Amps 240 Volts C Curve complete all as specified and directed. Make : Iegrand /L&T |
| 98 | S&F in replacement of old MCB SPN,C- curve, 230 volt 63 amp 10KA complete all as specified and directed. |
| 99 | S&F in replacement of old MCB SPN,C- curve, 230 volt 40 amp 10KA complete all as specified and directed. |
| 100 | S&F in replacement 415V 10 KA 'B' curve miniature circuit breaker (MCB) of 100 Amps current carrying capacity TPN in the DB complete all as specified and directed. |
| 101 | M&L in replacement for sub main wiring with 2 runs of FRLS PVC insulated multistrand, copper conductor cable of size 10 Sqmm along with one run of 10.0 sqmm PVC insulated cable 1100 volts multi stranded copper conductor as earth wire in and including PVC casing & capping complete all as specified and directed. Please Enable Macros to View BoQ information |
| 102 | M&L in replacement for sub main wiring with 2 runs of FRLS PVC insulated multistrand, copper conductor cable of size 10 Sqmm along with one run of 10.0 sqmm PVC insulated cable 1100 volts multi stranded copper conductor as earth wire in and including PVC casing & capping complete all as specified and directed. Please Enable Macros to View BoQ information |
